Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PH3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

The middle-infrared spectrum of Saturn - Evidence for phosphine and upper limits to other trace atmospheric constituents

Observations of Saturn at high spectral resolution in the middle-IR spectral region (2.5-5.6 microns) were obtained using a Fourier spectrometer at ground-based and airborne observatories. These spectra establish that PH3 exists on Saturn with an abundance at least equal to the solar P/H value, and probably enhanced by about a factor of 2. No evidence is found for gaseous or solid NH3 on Saturn throughout this spectral region, and upper limits to several other molecules (H2O, HCN, SiH4, and GeH4) are determined. Frequent comparisons of the spectral data for Saturn with observations and interpretations of IR studies of Jupiter show that these two planetary atmospheres are chemically similar, with major observational differences accounted for by reduced H2O and NH3 abundances in Saturn's colder atmosphere.

Larson, H. P.↗
NASA NTRS1980

A radio search for interstellar phosphorus compounds

The J = 1-0 and 3-2 transitions of phosphorus nitride, PN, with resolvable hyperfine components at 46.99 GHz and blended components at 140.97 GHz, and transitions of phosphine, PH3, at 47.39 and 46.94 GHz, arising from a small induced dipole moment, have been searched for but not found in interstellar molecular clouds. The J = 3/2-1/2, F - 3/2-3/2 transition of nitric oxide, NO, and the J(K-K+) = 16(4, 12) -15(5, 11) transition of sulfur dioxide, SO2, have been detected in Orion and Sagittarius B2. An unidentified emission line, U140921.8 MHz, has been observed in IRC + 10216.

Hollis, J. M.↗
NASA NTRS1981

Infrared observations of the Saturnian system from Voyager 1

Atmospheric chemistry analyses of Saturn based on Voyager 1 infrared spectral and radiometric data are presented, including characteristics of the planet's rings and of Titan and other satellites. Infrared spectra of Saturn indicate the presence of H2, CH4, NH3, PH3, C2H2, and C2H6, with the possibility of C3H4 and C3H8. The atmospheric thermal structure of the planet shows hemispheric asymmetries that are consistent with seasonally varying insolation response, with an extensive small-scale latitudinal structure. Atmospheric chemistries of Titan, and optical and thermal characteristics for the rings of Saturn, are also given.

Hanel, R.↗
NASA NTRS1982

Jupiter and Saturn from 2 to 6 microns

Earth based spectroscopic observations that support current compositional and structural analyses of planetary atmospheres are summarized. The overview of Jupiter's IR spectrum illustrates a fundamental constraint to observations of the outer planets: atmospheric studies are restricted to narrow, isolated windows defined by the planetary absorbers H2, CH4, NH3, and PH3. Some of these planetary windows, such as at 1.6 micron are accessible in ground based observations, but others, such as at 1.9 and 2.7 micron are totally obscured by terrestrial H2O. For this reason, high altitude sites, such as aircraft, balloons, and spacecraft, are essential for IR spectral studies of the outer planets.

Larson, H. P.↗
NASA NTRS1983

A determination of the composition of the Saturnian stratosphere using the IUE

Ultraviolet spectra of Saturn from the IUE satellite was reduced to produce a geometric albedo of the planet from 1500 to 3000 A. By matching computer models to the albedo a chemical composition consistent with the data was determined. This model includes C2H2 and C2H6 with mixing ratios and distributions of 9 + or - 3 x 10 to the -8th in the top 20 mbar of the atmosphere with none below for C2H2 and 6 + or 1 x 10 to the -6th also in the top 20 mbar with none below for C2H6. The C2H2 and C2H6 distributions and the C2H6 mixing ratio are taken directly from the Voyager IRIS model (R. Courtin et al., 1981). The Voyager IRIS model also includes PH3, which is not consistent with the UV albedo from 1800 to 2400 A. This model requires a previously unidentified absorber to explain the albedo near 1600 A. After considering several candidates, it is found that the best fit to the data is obtained with H2O, having a column density of 6 + or - 1 x 10 to the -3 cm-am.

Winkelstein, P.↗
NASA NTRS1984

The chemistry of phosphorus in dense interstellar clouds

Laboratory experiments show that the ion-molecule chemistry of phosphorus is significantly different from that of nitrogen in dense interstellar clouds. The PH3 molecule is not readily formed by gas-phase, ion-molecule reactions in these regions. Laboratory results used in a simple kinetic model indicate that the most abundant molecule containing phosphorus in dense clouds is PO.

Thorne, L. R.↗
NASA NTRS1984

Composition and chemistry of Saturn's atmosphere

A comprehensive discussion and review is presented of the chemistry and composition of Saturn as determined by earth-based, earth-orbital, and Voyager 1 and 2 spectroscopic observations. The observations imply that there are important differences between the actual composition of Saturn's atmosphere and that predicted for a homogeneous solar-composition planet. The H2, He, Ch4, NH3, and PH3 volume mixing ratios differ from the expected solar composition ratios, implying that during its formation Saturn accreted a significant amount of ice and rock. The depletion of He in the visible atmosphere suggests that this element has preferentially differentiated toward the center of the planet. The D to H ratio is similar to that on Jupiter and has important cosmological implications. Volume mixing ratios for C2H6 and C2H2 are consistent with the theoretically expected photochemical sources for these gases.

Prinn, R. G.↗
NASA NTRS1986

The gas composition of Jupiter derived from 5 micron airborne spectroscopic observations

It is pointed out that Jupiter's 5-micron spectrum is a very diagnostic observational tool to probe the troposphere of this giant planet. A report is presented of abundance analyses of NH3, PH3, CH4, CH3D, CO, and GeH4 in the 1- to 6-bar pressure range in Jupiter's troposphere. All the considered molecules have been previously detected in ground-based, airborne, and spacecraft observations of Jupiter. The contribution made by the present study is related to a self-consistent simultaneous determination of the abundances of all of these molecules at the same physical level in Jupiter's atmosphere using one high spectral resolution dataset and a radiative transfer model. It is found that most abundances deviate significantly from expectations based upon an atmospheric model assuming solar composition and chemical equilibrium. The D/H ratio in Jupiter is comparable to that measured in the interstellar medium.

Bjoraker, G. L.↗
NASA NTRS1987

Laboratory evaluation and application of microwave absorption properties under simulated conditions for planetary atmospheres

Laboratory measurements were conducted to evaluate properties of atmospheric gases under simulated conditions for the outer planets. A significant addition to this effort was the capability to make such measurements at millimeter wavelengths. Measurements should soon be completed on the millimeter wave absorption from ammonia under Jovian conditions. Also studied will be the feasibility of measuring the microwave and millimeter wave properties of phosphine (PH3) under simulated Jovian conditions. Further analysis and application of the laboratory results to microwave and millimeter wave absorption data for the outer planet, such as Voyager Radio Occultation experiments, will be pursued.

Steffes, Paul G.↗
NASA NTRS1987

Atlas of Absorption Lines from 0 to 17900 Cm (sup)-1

Plots of logarithm (base 10) of absorption line strength versus wavenumber from 0 to 17900/cm(sup)-1 are shown for the 28 atmospheric gases (H2O, CO2, O3, N2O, CO, CH4, O2, NO, SO2, NO2, NH3, HNO3, OH, HF, HCl, HBr, HI, ClO, OCS, H2CO, HOCl, N2, HCN, CH3Cl, H2O2, C2H2, C2H6, PH3), which appear in the 1986 Air Force Geophysics Laboratory high-resolution transmission molecular absorption data base (HITRAN) compilation, and for O(P-3), O-18 isotopic ozone, and HO2 from the 1984 JPL compilation in the 0- to 200/cm(sup)-1 region, and infrared solar CO lines at 4500 K. Also shown are plots of logarithm (base 10) of approximate infrared absorption cross sections of 11 heavy molecules versus wavenumber. The cross-section data cover 700 to 1800/cm(sup)-1 and are included as a separate data file in the 1986 HITRAN database.

Park, J. H.↗
NASA NTRS1987

Rate constant for the reaction of atomic oxygen with phosphine at 298 K

The rate constant for the reaction of atomic oxygen with phosphine has been measured at 298 K using flash photolysis combined with time-resolved detection of O(3P) via resonance fluorescence. Atomic oxygen was produced by flash photolysis of N2O or NO highly diluted in argon. The results were shown to be independent of (PH3), (O), total pressure and the source of O(3P). The mean value of all the experiments is k1 = (3.6 + or -0.8) x 10 to the -11th cu cm/s (1 sigma). Two previous measurements of k1 differed by more than an order of magnitude, and the results support the higher value obtained in a discharge flow-mass spectrometry study. A comparison with rate data for other atomic and free radical reactions with phosphine is presented, and the role of these reactions in the aeronomy or photochemistry of Jupiter and Saturn is briefly considered.

Stief, L. J.↗
NASA NTRS1988

Planetary astronomy and supporting laboratory research

The aim was to obtain form laboratory measurements the molecular parameters needed to interpret observations of planetary and cometary spectra, and to develop the analytical and computational techniques to interpret the observed spectra in terms of planetary atmospheres including solids and cometary ices. The gas phase molecular parameters measured include the intensities and half-widths of vib-rotational lines, total intensities of absorption bands, temperature dependencies, and absorption and pressure parameters in random-band models of absorption bands. Computation of line shapes of H2 quadrupole lines from quantum mechanical first principles for comparison with laboratory data and use in modeling of planetary atmospheres was accomplished. The solid phase measurements include band profile and quantitative intensity measurements and dependence on composition as well as thermal and photolytic processing which mimics the particular astrophysical environments. Work on GeH4, PH3, has made significant progress.

Valero, F. P. J.↗
NASA NTRS1990

High resolution, low temperature photoabsorption cross-section of C2H2 with application to Saturn's atmosphere

New laboratory observations of the VUV absorption cross-section of C2H2, obtained under physical conditions approximating stratospheres of the giant planets, were combined with IUE observations of the albedo of Saturn, for which improved data reduction techniques have been used, to produce new models for that atmosphere. When the effects of C2H2 absorption are accounted for, additional absorption by other molecules is required. The best-fitting model also includes absorption by PH3, H2O, C2H6 and CH4. A small residual disagreement near 1600 A suggests that an additional trace species may be required to complete the model.

Caldwell, John↗
NASA NTRS1990

Atmospheric pressure organometallic vapor-phase epitaxial growth of (Al/x/Ga/1-x/)0.51In0.49P (x from 0 to 1) using trimethylalkyls

This paper describes growth of (Al/x/Ga/1-x)0.51In0.49P layers (with x from 0 to 1) lattice-matched to (001)-oriented GaAs substrates by atmospheric-pressure OMVPE, using trimethylindium, trimethylaluminum, and trimethylgallium and PH3 as source materials in a horizontal reactor. Excellent surface morphologies were obtained over the entire range of Al compositions at a growth temperature of 680 C. Photoluminescence (PL) was observed for all samples with x values not below 0.52, with PL peak energies as high as 2.212 eV. The PL FWHM for Ga(0.51)In(0.49)P was 7.2 meV at 10 K and 35 meV at 300 K. At 10 K, the PL intensity was nearly a constant over the composition range from x = 0 to 0.52.

Cao, D. S.↗
NASA NTRS1995

InP tunnel junction for InGaAs/InP tandem solar cells

Chemical beam epitaxy (CBE) has been shown to allow the growth of high quality materials with reproducible complex compositional and doping profiles. The main advantage of CBE compared to metalorganic chemical vapor deposition (MOCVD), the most popular technique for InP-based photovoltaic device fabrication, is the ability to grow high purity epilayers at much lower temperatures (450-530 C). We have previously shown that CBE is perfectly suited toward the fabrication of complex photovoltaic devices such as InP/InGaAs monolithically integrated tandem solar cells, because its low process temperature preserves the electrical characteristics of the InGaAs tunnel junction commonly used as an ohmic interconnect. In this work using CBE for the fabrication of optically transparent (with respect to the bottom cell) InP tunnel diodes is demonstrated. Epitaxial growth were performed in a Riber CBE 32 system using PH3 and TMIn as III and V precursors. Solid Be (p-type) and Si (n-type) have been used as doping sources, allowing doping levels up to 2 x 10(exp -19)/cu cm and 1 x 10(exp -19)/cu cm for n and p type respectively. The InP tunnel junction characteristics and the influence of the growth's conditions (temperature, growth rate) over its performance have been carefully investigated. InP p(++)/n(++) tunnel junction with peak current densities up to 1600 A/sq cm and maximum specific resistivities (V(sub p)/I(sub p) - peak voltage to peak current ratio) in the range of 10(exp -4) Omega-sq cm were obtained. The obtained peak current densities exceed the highest results previously reported for their lattice matched counterparts, In(0.53)Ga( 0.47)As and should allow the realization of improved minimal absorption losses in the interconnect InP/InGaAs tandem devices for Space applications. Owing to the low process temperature required for the top cell, these devices exhibit almost no degradation of its characteristics after the growth of subsequent thick InP layer suggesting minimal doping cross diffusion in the narrow space-charge region (approximately 1-5 nm) of the device. The fabrication of tandem devices using InP tunnel diodes as interconnect is in progress and will be reported at the conference.

Vilela, M. F.↗
NASA NTRS2002

Laboratory Evaluation and Application of Microwave Absorption Properties under Simulated Conditions for Planetary Atmospheres

Radio absorptivity data for planetary atmospheres obtained from spacecraft radio occultation experiments, entry probe radio signal absorption measurements, and earth-based or spacecraft-based radio astronomical (emission) observations can be used to infer abundances of microwave absorbing constituents in those atmospheres, as long as reliable information regarding the microwave absorbing properties of potential constituents is available. The use of theoretically-derived microwave absorption properties for such atmospheric constituents, or the use of laboratory measurements of such properties taken under environmental conditions that are significantly different than those of the planetary atmosphere being studied, often leads to significant misinterpretation of available opacity data. Laboratory measurements have shown that the centimeter-wavelength opacity from gaseous phosphine (PH3) under simulated conditions for the outer planets far exceeds that predicted from theory over a wide range of temperatures and pressures. This fundamentally changed the resulting interpretation of Voyager radio occultation data at Saturn and Neptune. It also directly impacts planning and scientific goals for study of Saturn's atmosphere with the Cassini Radio Science Experiment and the Rossini RADAR instrument. The recognition of the need to make such laboratory measurements of simulated planetary atmospheres over a range of temperatures and pressures which correspond to the altitudes probed by both radio occultation experiments and radio astronomical observations, and over a range of frequencies which correspond to those used in both spacecraft entry probe and orbiter (or flyby) radio occultation experiments and radio astronomical observations, has led to the development of a facility at Georgia Tech which is capable of making such measurements. It has been the goal of this investigation to conduct such measurements and to apply the results to a wide range of planetary observations, both spacecraft- and earth-based, in order to determine the identity and abundance profiles of constituents in those planetary atmospheres,

Steffes, Paul G.↗
NASA NTRS2005

Laboratory Evaluation and Application of Microwave Absorption Properties under Simulated Conditions for Planetary Atmospheres

Radio absorptivity data for planetary atmospheres obtained from spacecraft radio occultation experiments, entry probe radio signal absorption measurements, and earth- based or spacecraft-based radio astronomical (emission) observations can be used to infer abundances of microwave absorbing constituents in those atmospheres, as long as reliable information regarding the microwave absorbing properties of potential constituents is available. The use of theoretically-derived microwave absorption properties for such atmospheric constituents, or the use of laboratory measurements of such properties taken under environmental conditions that are significantly different than those of the planetary atmosphere being studied, often leads to significant misinterpretation of available opacity data. For example, new laboratory measurements completed recently by Mohammed and Steffes (2003 and 2004) under this grant (NAG5-12122,5/1/02-4/30/05), have shown that the millimeter-wavelength opacities from both gaseous phosphine (PH3) and gaseous ammonia ("3) under simulated conditions for the outer planets vary significantly from that predicted by theory over a wide range of temperatures and pressures. These results have directly impacted planning and scientific goals for study of Saturn's atmosphere with the Cassini Radio Science Experiment, as discussed below. The recognition of the need to make such laboratory measurements of simulated planetary atmospheres over a range of temperatures and pressures which correspond to the altitudes probed by both radio occultation experiments and radio astronomical observations, and over a range of frequencies which correspond to those used in both spacecraft entry probe and orbiter (or flyby) radio occultation experiments and radio astronomical observations, has led to the development of a facility at Georgia Tech which is capable of making such measurements. It has been the goal of this investigation to conduct such measurements and to apply the results to a wide range of planetary observations, both spacecraft and earth-based, in order to determine the identity and abundance profiles of constituents in those planetary atmospheres.

Steffes, Paul G.↗
NASA NTRS2011

Trace Species Identified in Saturn's Northern Storm Region

The massive storm at 40degN on Saturn that began in December 2010 has produced significant and lasting effects in the northern hemisphere on temperature and species abundances [I}. The northern storm region was observed at 0.5/cm spectral resolution in March 2011 by Cassini's Composite Infrared Spectrometer (CIRS). Temperatures in the stratosphere as high as 190 K were derived from CIRS spectra in warm regions referred to as "beacons". Other longitudes exhibit cold temperatures in the upper troposphere. These unusual conditions allow us to identify rare species such as C4H2, C3H4, and CO2 in the stratosphere, as well as to measure changes in the abundance of phosphine (PH3) in the troposphere. Phosphine is a disequilibrium species whose abundance is a tracer of upwelling from the deep atmosphere.

Bjoraker, Gordon L.↗