Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PDT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

68 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

X-34 Main Propulsion System Design and Operation

The X-34 program is a joint industry/government program to develop, test, and operate a small, fully-reusable hypersonic flight vehicle, utilizing technologies and operating concepts applicable to future Reusable Launch Vehicle (RLV) systems. The vehicle will be capable of Mach 8 flight to 250,000 feet altitude and will demonstrate an all composite structure, composite RP-1 tank, the Marshall Space Flight Center (MSFC) developed Fastrac engine, and the operability of an advanced thermal protection systems. The vehicle will also be capable of carrying flight experiments. MSFC is supporting the X-34 program in three ways: Program Management, the Fastrac engine as Government Furnished Equipment (GFE), and the design of the Main Propulsion System (MPS). The MPS Product Development Team (PDT) at MSFC is responsible for supplying the MPS design, analysis, and drawings to Orbital. The MPS consists of the LOX and RP-1 Fill, Drain, Feed, Vent, & Dump systems and the Helium & Nitrogen Purge, Pressurization, and Pneumatics systems. The Reaction Control System (RCS) design was done by Orbital. Orbital is the prime contractor and has responsibility for integration, procurement, and construction of all subsystems. The paper also discusses the design, operation, management, requirements, trades studies, schedule, and lessons learning with the MPS and RCS designs.

Champion, R. J., Jr.↗
NASA NTRS1999

Assimilation of SeaWinds Scatterometer Data in the GEOS Data Assimilation System

The first SeaWinds scatterometer was launched in to space aboard the Quikscat satellite on June 19, 1999 at 7:15 p.m. PDT. Flying in a near polar orbit 800 km above the earth's surface, SeaWinds uses an advanced scatterometer design to measure surface wind velocity over 90 percent of the ice free oceans ever 24 hours. This first SeaWinds mission is designed to replace the NASA Scatterometer (NSCAT) which ceased providing wind velocity data when the ADEOS I satellite failed. A second SeaWinds is scheduled to be launched late in 2000 aboard ADEOS II. Previous scatterometer assimilation experiments conducted by the NASA Data Assimilation Office, using both ERS and NSCAT wind observations, have demonstrated considerable potential for this type of data to improve both atmospheric analyses and forecasts, however much of the smaller scale information content of the scatterometer data could not be taken into account in the early coarse resolution versions of the Goddard (GEOS) Data Assimilation System (DAS) or in operational data assimilation systems. In this paper, we will describe data assimilation experiments in which the new higher resolution versions of the GOES DAS are used to assimilate SeaWinds scatterometer winds. Following a brief discussion of the SeaWinds design and the methodology used to assimilate scatterometer data in the GOES DAS, the quality of the SeaWinds data and the impact of SeaWinds on GOES analyses and forecasts at different resolutions will be presented.

Atlas, Robert↗
NASA NTRS2001

SHARP-B2: Flight Test Objectives, Project Implementation and Initial Results

On September 28, 2000 the SHARP-B2 flight experiment was launched from Vandenberg Air Force Base, California. SHARP-B2 is the 2nd Ballistic flight test in the SHARP (Slender Hypervelocity Aerothermodynamic Research Probes) program which develops and tests new thermal protection materials and sharp body concepts. The flight tested Ultra-High Temperature Ceramics (UHTCs), which may radically change the design and performance of future aerospace vehicles. The new designs may overturn an age-old tenet of aerodynamics: that blunt-body aerospace vehicles, but not those with sharp leading edges, can survive the searing temperatures created as the vehicles tear through the atmosphere. Sharp leading edges offer numerous advantages over the blunt-body design currently in use. They could allow a space shuttle or crew return vehicle to maneuver in space more like an airplane and potentially allow astronauts to return to Earth from anywhere on orbit. They may allow improved astronaut safety by decreasing the risk of aborting into the ocean. They may reduce the electromagnetic interference that causes the communications blackouts that plague reentering blunt-body space vehicles. Reducing the amount of drag could lead to a reduction in propulsion requirements. Planetary probes could make use of sharp-body technology for aerobraking and to maximize their maneuvering capability. SHARP-B2 was a joint effort among NASA Ames, Sandia National Laboratories, the U.S. Air Force and the U.S. Army. It was funded by the Pathfinder Program at NASA's Marshall Space Flight Center. The SHARP-B2 payload was carried aboard a U.S. Air Force Minuteman III missile carrying a modified Mk 12A reentry vehicle (RV), which blasted off from Vandenberg Air Force Base near Lompoc, CA, at 3:01 a.m. PDT on Sept. 28. The RV was equipped with four 5. 1 inch-long strakes, or sharp leading edges. Each strake contained three UHTCs: ZrB2/SiC/C; ZrB2/SiC; and HfB2/SiC. Once it reached an altitude of about 400 nautical miles, the RV was released, returning through Earth's atmosphere at speeds exceeding Mach 22. One pair of strakes was designed to retract just before reaching temperatures high enough to cause the material to begin ablating. The other pair was designed to retract shortly after ablation began, at an expected temperature of nearly 5,100 degrees Fahrenheit. Sensors in the strakes measured how closely performance matched pre-flight calculations, and data was successfully collected throughout the 23-minute flight. A parachute was deployed (but not fully inflated) and the RV splashed down in a lagoon at the Kwajalein missile range in the Pacific Ocean. Within 3 hours radar track analysis showed ocean entry to be precisely at the latitude/longitude coordinates estimated during pre-flight simulation. An hour later a ship was deployed by the Army to recover the reentry vehicle, which was recovered in 165 feet of water, just 500 feet from its planned splash-down point. This is the first RV recovery in over a decade.

Salute, Joan↗
NASA NTRS2004

Benchmarking In-Flight Icing Detection Products for Future Upgrades

This paper summarizes the results of a benchmarking exercise conducted as part of the NASA supported Advanced Satellite Aviation-Weather Products (ASAP) Program. The goal of ASAP is to increase and optimize the use of satellite data sets within the existing FAA Aviation Weather Research Program (AWRP) Product Development Team (PDT) structure and to transfer advanced satellite expertise to the PDTs. Currently, ASAP fosters collaborative efforts between NASA Laboratories, the University of Wisconsin Cooperative Institute for Meteorological Satellite Studies (UW-CIMSS), the University of Alabama in Huntsville (UAH), and the AWRP PDTs. This collaboration involves the testing and evaluation of existing satellite algorithms developed or proposed by AWRP teams, the introduction of new techniques and data sets to the PDTs from the satellite community, and enhanced access to new satellite data sets available through CIMSS and NASA Langley Research Center for evaluation and testing.

Politovich, M. K.↗
NASA NTRS2006

Terrestrial Planet Finder Interferometer Technology Status and Plans

A viewgraph presentation on the technology status and plans for Terrestrial Planet Finder Interferometer is shown. The topics include: 1) The Navigator Program; 2) TPF-I Project Overview; 3) Project Organization; 4) Technology Plan for TPF-I; 5) TPF-I Testbeds; 6) Nulling Error Budget; 7) Nulling Testbeds; 8) Nulling Requirements; 9) Achromatic Nulling Testbed; 10) Single Mode Spatial Filter Technology; 11) Adaptive Nuller Testbed; 12) TPF-I: Planet Detection Testbed (PDT); 13) Planet Detection Testbed Phase Modulation Experiment; and 14) Formation Control Testbed.

Terrestrial Planet Finder (TPF)↗
NASA NTRS2006

Aviation Applications for Satellite-Based Observations of Cloud Properties, Convection Initiation, In-flight Icing, Turbulence and Volcanic Ash

Advanced Satellite Aviation Weather Products (ASAP) was jointly initiated by the NASA Applied Sciences Program and the NASA Aviation Safety and Security Program in 2002. The initiative provides a valuable bridge for transitioning new and existing satellite information and products into Federal Aviation Administration (FAA) Aviation Weather Research Program (AWRP) efforts to increase the safety and efficiency of the airspace system. The ASAP project addresses hazards such as convective weather, turbulence (clear-air and cloud-induced), icing and volcanic ash and is particularly applicable in extending the monitoring of weather over data-sparse areas such as the oceans and other observationally remote locations. ASAP research is conducted by scientists from NASA, the FAA AWRP's Product Development Teams (PDT), NOAA and the academic research community. In this paper we provide a summary of activities since the inception of ASAP that emphasize the use of current-generation satellite technologies toward observing and mitigating specified aviation hazards. A brief overview of future ASAP goals is also provided in light of the next generation of satellite sensors (e.g., hyperspectral; high spatial resolution) to become operational in the 2006-2013 timeframe.

Mecikalski, John R.↗
NASA NTRS2013

MARS Science Laboratory Post-Landing Location Estimation Using Post2 Trajectory Simulation

The Mars Science Laboratory (MSL) Curiosity rover landed safely on Mars August 5th, 2012 at 10:32 PDT, Earth Received Time. Immediately following touchdown confirmation, best estimates of position were calculated to assist in determining official MSL locations during entry, descent and landing (EDL). Additionally, estimated balance mass impact locations were provided and used to assess how predicted locations compared to actual locations. For MSL, the Program to Optimize Simulated Trajectories II (POST2) was the primary trajectory simulation tool used to predict and assess EDL performance from cruise stage separation through rover touchdown and descent stage impact. This POST2 simulation was used during MSL operations for EDL trajectory analyses in support of maneuver decisions and imaging MSL during EDL. This paper presents the simulation methodology used and results of pre/post-landing MSL location estimates and associated imagery from Mars Reconnaissance Orbiter s (MRO) High Resolution Imaging Science Experiment (HiRISE) camera. To generate these estimates, the MSL POST2 simulation nominal and Monte Carlo data, flight telemetry from onboard navigation, relay orbiter positions from MRO and Mars Odyssey and HiRISE generated digital elevation models (DEM) were utilized. A comparison of predicted rover and balance mass location estimations against actual locations are also presented.

Davis, J. L.↗
NASA NTRS2012

Entry, Descent, and Landing Communications for the 2011 Mars Science Laboratory

The Mars Science Laboratory (MSL), established as the most advanced rover to land on the surface of Mars to date, launched on November 26th, 2011 and arrived to the Martian Gale Crater during the night of August 5th, 2012 (PDT). MSL will investigate whether the landing region was ever suitable to support carbon-based life, and examine rocks, soil, and the atmosphere with a sophisticated suite of tools. This paper addresses the flight system requirement by which the vehicle transmitted indications of the following events using both X-band tones and UHF telemetry to allow identification of probable root causes should a mission anomaly have occurred: Heat-Rejection System (HRS) venting, completion of the cruise stage separation, turn to entry attitude, atmospheric deceleration, bank angle reversal commanded, parachute deployment, heatshield separation, radar ground acquisition, powered descent initiation, rover separation from the descent stage, and rover release. During Entry, Descent, and Landing (EDL), the flight system transmitted a UHF telemetry stream adequate to determine the state of the spacecraft (including the presence of faults) at 8 kbps initiating from cruise stage separation through at least one minute after positive indication of rover release on the surface of Mars. The flight system also transmitted X-band semaphore tones from Entry to Landing plus one minute although since MSL was occulted, as predicted, by Mars as seen from the Earth, Direct-To-Earth (DTE) communications were interrupted at approximately is approx. 5 min after Entry ( approximately 130 prior to Landing). The primary data return paths were through the Deep Space Network (DSN) for DTE and the existing Mars network of orbiting assets for UHF, which included the Mars Reconnaissance Orbiter (MRO), Mars Odyssey (ODY), and Mars Express (MEX) elements. These orbiters recorded the telemetry data stream and returned it back to Earth via the DSN. The paper also discusses the total power received during EDL and the robustness of the telecom design strategy used to ensure EDL communications coverage.

relay operations↗
NASA NTRS2013

Approach and Entry, Descent, and Landing Operations for the Mars Science Laboratory Mission

On August 5th, 2012, at 10:31 PM PDT, the Mars Science Laboratory (MSL) rover Curiosity landed safely within Gale Crater. Her successful landing de-pended not only upon the flawless execution of the numerous critical activities during the seven minute entry, descent, and landing (EDL), but also upon the operational preparations and decisions made by the flight team during approach, the final weeks, days, and hours prior to landing. During this period, decisions made by the flight team balanced operational risk to the spacecraft in flight with any resulting risks incurred during EDL as a result of those decisions. This pa-per summarizes the operations plans made in preparation for Approach and EDL and the as flown decisions and actions executed that balanced the operational and EDL risks and prepared the vehicle for a successful landing.

Mars Science Laboratory (MSL)↗
NASA NTRS2019

2018 Mars Insight Trajectory Reconstruction and Performance from Launch Through Landing

The InSight mission successfully launched to Mars on an Atlas V 401 launch vehicle from the Western Test Range (WTR) at Vandenberg Air Force Base (VAFB) at 04:05:00 PDT on May 5th, 2018 and landed in the Elysium Planitia Region on November 26th, 2018. Data confirming nominal touchdown was received at 11:52:59 AM PST. This paper summarizes in detail the actual vs. predicted performance of the InSight spacecraft and all associated assets in terms of launch vehicle events, injection performance, DSN performance, cruise performance, and Entry, Descent, and Landing events.

Abilleira, Fernando↗
DOE OSTI2020

Methods for making bacteriochlorin macrocycles comprising an annulated isocyclic ring and related compounds

Described herein are bacteriochlorins comprising an annulated isocyclic ring such as a compound Formula I: or a metal conjugate thereof, wherein: R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, and Z are each as defined herein. Also described are methods and intermediates for the synthesis of bacteriochlorins comprising an annulated isocyclic ring, and methods of using such bacteriochlorins for, among other things, diagnostic and therapeutic purposes such as, e.g., luminescent compounds in flow cytometry, and/or as active agents in photodynamic therapy (PDT).

Lindsey, Jonathan S.↗
DOE OSTI2021

Northern-southern route to synthesis of bacteriochlorins

Described herein are chlorins, bacteriochlorins, methods and intermediates for the synthesis of bacteriochlorins, and methods of using such bacteriochlorins for, among other things, diagnostic and therapeutic purposes such as luminescent compounds in flow cytometry, and as active agents in photodynamic therapy (PDT).

Liu, Yizhou↗
DOE OSTI2020

Evidence of Reversible Oxidation at CuInSe2 Grain Boundaries

Effects related to alkali metal doping and grain boundaries have puzzled the chalcopyrite photovoltaics community for a long time. This study is the first to report reversible oxidation of grain boundaries in CuInSe2 thin films. The phenomenon is observed in sodium-doped films, but not in undoped ones. Cathodoluminescence imaging, secondary ion mass spectrometry and Kelvin probe force microscopy analyses are performed on CuInSe2 thin films before and after exposure to vacuum. The findings suggest the existence of yet unidentified solid-gas equilibria. Resolving the nature of such reactions will provide new insights into the mechanism of alkali metal doping and passivation in chalcopyrite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Synthesis of highly water soluble tetrabenzoporphyrins and their application toward photodynamic therapy

Novel tetraaryl-(pyridinium-4-yl)-tetrabenzoporphyrins have been successfully synthesized via a Heck-based sequence reaction. These tetrabenzoporphyrins were substituted with eight pyridyl groups at the fused benzene rings. Methylation of the pyridyl groups with methyl iodide afforded highly water soluble tetrabenzoporphyrins carrying eight ionic groups. The extended π-conjugation broadened and red-shifted the absorption band of these porphyrins to 650–750 nm. Furthermore, these cationic tetrabenzoporphyrins showed non-toxicity in the dark up to 100 uM. High phototoxicity with IC 50 values lower than 18 μM were obtained for these tetrabenzoporphyrins.

DFT calculation photosensitizer↗