SEARCH · Engineering Papers

Results for “P-waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Electron attachment in F2 - Conclusive demonstration of nonresonant, s-wave coupling in the limit of zero electron energy

Dissociative electron attachment to F2 has been observed in the energy range 0-140 meV, at a resolution of 6 meV (full width at half maximum). Results show conclusively a sharp, resolution-limited threshold behavior consistent with an s-wave cross section varying as sq rt of epsilon. Two accurate theoretical calculations predict only p-wave behavior varying as the sq rt of epsilon. Several nonadiabatic coupling effects leading to s-wave behavior are outlined.

Chutjian, A.↗

NASA NTRS1987

Plume formation in the D-double prime-layer and the roughness of the core-mantle boundary

A series of very-high-resolution finite element calculations of plume formation in the D-double prime-layer has been performed for several plausible rheologies and boundary conditions in order to study both the early and later stages of boundary layer development. The results show that plumes are initiated by coalescence of small-scale convective instabilities within the low-viscosity region immediately above the core-mantle boundary (CMB). These instabilities support topographic roughness on the CMB having horizontal scales of 20-50 km and provide a source for scattered P-waves seen as precursors to the phases PKIKP and PKKP. The calculated structure of fully developed plumes emerging from the D-double prime-layer consists of 5-50 cm/yr flow confined to 50-100 km thick vertical conduits. With strongly temperature-dependent viscosity, plumes exhibit time-dependent behavior, including upward propagating solitary conduit waves, which may contribute to episodicity in hotspot volcanism.

Olson, Peter↗

NASA NTRS1992

Electron attachment to molecules at ultralow electron energies

Experimental techniques, both single-collision and multiple-collision, for studying electron attachment to molecules at energies below 0.1 eV are reviewed. Recent attachment results in HI, DI, F2, SF6, CCl4, and CFCl3 are examined from the point of view of threshold behavior (s- or p-wave), threshold energetics, and the temperature dependence of the attachment rate constant. An interesting application of the s-wave phenomenon to trace-species detection is given.

Chutjian, Ara↗

NASA NTRS1993

The seismic response of an aquifer to the propagation of an impact generated shock wave: A possible trigger of the Martian outflow channels?

Aquifer dilation from shock waves produced by the 8.4 magnitude Alaskan earthquake of 1964 led to water and sediment ejection from the ground up to 400 km away from the earthquake's epicenter. Groundwater disturbances were observed as far away as Perry, Florida (approximately 5500 km), where well water fluctuations with an amplitude of as much as 2.3 m were reported. The martian cratering record provides evidence that the planet has experienced numerous seismic events of a similar, and often much greater, magnitude. Given this fact, and the photogeologic evidence for abundant water in the early crust, the response of a basalt aquifer to the propagation of compressional waves (P-waves) produced by impacts in the 33-1000 km diameter size range were investigated. The resulting one-dimensional changes in effective stress and pore pressure were calculated - as a function of both distance and time - based on the following assumptions: (1) that all of the seismic energy radiated by an impact is transmitted as a single compressional wave; (2) that both the host rock and groundwater are compressible; and (3) that there is no net flow between the water-filled pores.

Leyva, Ivett A.↗

NASA NTRS2001

Measurement of Oblique Impact-generated Shear Waves

Experimental strain measurements reveal that oblique impacts can generate shear waves with displacements as large as those in the P-wave. Large oblique impacts may thus be more efficient sources of surface disruption than vertical impacts. Additional information is contained in the original extended abstract.

Dahl, J. M.↗

NASA NTRS2001

Resonances in Positronium Hydride

Recently, Ho and his colleagues have calculated the positions and widths of a series of resonances in the Ps+H scattering system, using the complex -rotation method and have compared them with estimates that I made many years ago using a quite different technique. I assumed that the resonance mechanism was the existence in the rearrangement channel [e+ + H-] of an infinite series of perturbed Coulomb bound states. Although these must be broadened and shifted by coupling with the open scattering channel, I expected them to lie very close to the actual resonance positions. To verify this, I did a model calculation for S-waves, including the coupling, and found that the first two resonances were not shifted very far from their unperturbed position. The new, detailed calculation agrees with this result, but when the P-wave was examined it was found, surprisingly, that the lowest resonance indeed moved up in energy by a large amount. With the help of Joseph DiRienzi of the College of Notre Dame of Maryland I am now extending the old calculation to P- and D-waves, in an attempt to understand this unexpected energy shift. Results will be presented at the Workshop.

Drachman, Richard J.↗

NASA NTRS2002

D-Wave Resonances in Positronium Hydride

The problem of calculating the position and width of the lowest-lying (L = 0, 1) resonances in the Ps + H scattering system has recently been re-examined by the authors [1]. In the model used, resonances axe assumed generated by bound Rydberg states in the closed re-arranged channel [e(+) + H(-)]. This infinite series of Coulomb bound states are shifted somewhat by the coupling with the open scattering channel [Ps + H]. Estimates using this approach, first carried out by one of the authors [2] using a simple form of scattering wavefunction, indicated an anticipated small shift of resonance away from the Rydberg energy in the S-wave (L = 0). More recent results by Ho and Yan [3] using the complex-rotation method showed unexpected significant shifting in the P (L = 1) and D (L = 2)-wave resonance energies from their respective unperturbed values. Our re-calculation of the resonances [I I for L = 0 and I indicates that, in each case, reasonably consistent resonance energies are obtained by coupling the two lowest lying states (IS and 2S for L = 0 and 2P and 3P for L = 1). For each L it is the higher state (2S and 3P, respectively) that produces the resonance. The lower state (1S and 2P, respectively) is effective only in increasing the non-resonant phase shift. In this work we extend the model to L = 2 (D-waves). Our results show that, unlike the S and P-waves, the 313-state alone produces a resonant energy that is very close to the result of Yan and Ho [3]. Inclusion of the 4D-state produces a second resonance in the scattering system shifted up slightly from its unperturbed Rydberg energy.

Drachman, Richard J.↗

NASA NTRS2002

D-wave Resonances in Positronium Hydride

We have recently reexamined the problem of calculating the positions and widths of the lowest-lying S- and P-state resonances in the Ps+H scattering system. The resonances are generated by bound Rydberg states in the closed rearranged channel (e(+)+H(-)), shifted somewhat by coupling with the open scattering channel. This picture had been successfully applied for S-waves, but more recent results showed unexpectedly large shifts in both P- and D-wave resonances. Our recalculation for the S- and P-waves showed that the series of resonances begins with the second Rydberg state, giving rise to an apparent large shift. Now we have extended the calculations to D states. Here we find the expected results: The 3D Rydberg state produces a resonance very close to the result of Yan and Ho, and inclusion of the 4D state gives a second resonance only slightly shifted.

Drachman, Richard J.↗

NASA NTRS2003

Electron-H Elastic Scattering

Precision calculations for e^{-}-H and e^{-}-He^{+} for S-wave scattering in the elastic region have been carried out using the optical potential approach. This formalism is now extended to e^{-}-H P-wave scattering in the elastic region. The scattering equations are solved by the non-iterative method. Phase shifts are calculated using Hylleraas-type correlation functions up to 84 terms. Results are rigorous lower bounds to the exact phase shifts and they are compared to those obtained in previous calculations.

Bhatia, A. K.↗

NASA NTRS2004

Electron-Hydrogen Elastic Scattering

Scattering by single-electron systems is always of interest because the wave function of the target is known exactly. Various approximations have been employed to take into account distortion produced in the target. Among them are the method of polarized orbitals and the close coupling approximation. Recently, e-H and e-He+ S-wave scattering in the elastic region has been studied using the Feshbach projection operator formalism. In this approach, the usual Hartree-Fock and exchange potentials are augmented by an optical potential and the resulting phase shifts have rigorous lower bounds. Now this method is being applied to the e-H P-wave scattering in the elastic region. The number of terms in the Hylleraas-type wave function for the 1,3 P phase shifts is 84 and the resulting phase shifts (preliminary) are given. The results have been given up to five digits because to that accuracy they are rigorous lower bounds. They are in general agreement with the variational (VAR) results of Armstead, and those obtained from the intermediate energy R-matrix method (RM) of Scholz et al., and the finite element method (FEM) of Botero and Shertzer. The later two methods do not provide any bounds on phase shifts.

Bhatia, A. K.↗

NASA NTRS2011

The Effect of Sonic Booms on Earthquake Warning Systems

Several aerospace companies are designing quiet supersonic business jets for service over the United States. These aircraft have the potential to increase the occurrence of mild sonic booms across the country. This leads to interest among earthquake warning (EQW) developers and the general seismological community in characterizing the effect of sonic booms on seismic sensors in the field, their potential impact on EQW systems, and means of discriminating their signatures from those of earthquakes. The SonicBREWS project (Sonic Boom Resistant Earthquake Warning Systems) is a collaborative effort between Seismic Warning Systems, Inc. (SWS) and NASA Dryden Flight Research Center. This project aims to evaluate the effects of sonic booms on EQW sensors. The study consists of exposing high-sample-rate (1000 sps) triaxial accelerometers to sonic booms with overpressures ranging from 10 to 600 Pa in the free field and the built environment. The accelerometers record the coupling of the sonic boom to the ground and surrounding structures, while microphones record the acoustic wave above ground near the sensor. Sonic booms are broadband signals with more high-frequency content than earthquakes. Even a 1000 sps accelerometer will produce a significantly aliased record. Thus the observed peak ground velocity is strongly dependent on the sampling rate, and increases as the sampling rate is reduced. At 1000 sps we observe ground velocities that exceed those of P-waves from M L 3 earthquakes at local distances, suggesting that sonic booms are not negligible for EQW applications. We present the results of several experiments conducted under SonicBREWS showing the effects of typical-case low amplitude sonic booms and worst-case high amplitude booms. We show the effects of various sensor placements and sensor array geometries. Finally, we suggest possible avenues for discriminating sonic booms from earthquakes for the purposes of EQW.

Wurman, Gilead↗

NASA NTRS2014

D-Wave Electron-H, -He+, and -Li2+ Elastic Scattering and Photoabsorption in P States of Two-Electron Systems

In previous papers [A. K. Bhatia, Phys. Rev. A 85, 052708 (2012); 86, 032709 (2012); 87, 042705 (2013)] electron-H, -He+, and -Li2+ P-wave scattering phase shifts were calculated using the variational polarized orbital theory. This method is now extended to the singlet and triplet D-wave scattering in the elastic region. The long-range correlations are included in the Schrodinger equation by using the method of polarized orbitals variationally. Phase shifts are compared to those obtained by other methods. The present calculation provides results which are rigorous lower bonds to the exact phase shifts. Using the presently calculated D-wave and previously calculated S-wave continuum functions, photoionization of singlet and triplet P states of He and Li+ are also calculated, along with the radiative recombination rate coefficients at various electron temperatures.

D-wave↗

DOE OSTI2025

Unconventional Superconductivity Mediated by Exciton Density Wave Fluctuations

Synthetic platforms afford an unparalleled degree of controllability in realizing strongly correlated phases of matter. In this Letter, we study the possibility of electrically tunable exciton-mediated superconductivity arising in charge-imbalanced bilayer semiconductors. Focusing on the case of a bilayer semiconductor heterostructure, we identify the gating conditions required to achieve exciton density wave order within a self-consistent Hartree-Fock approximation. We analyze the role of the coupling of excitonic fluctuations to the fermionic charge carriers to find that the Goldstone mode of the density wave order can mediate attractive interactions leading to superconductivity. Furthermore, when the system is close to the density wave ordering, the interactions mediated by low-energy exciton modes can support an interlayer pair-density wave superconductor of anisotropic character. We discuss experimental signatures associated with these phenomena.

excitons↗

DOE OSTI2025

Anisotropic field-induced changes in the superconducting order parameter of UTe 2

UTe 2 is a newly discovered unconventional superconductor, where electron Cooper pairs combine into a spin-triplet ground state. We study the specific heat C( H,T ) of a high-quality UTe 2 single crystal, with a single anomaly at a high superconducting transition temperature T c = 2.1 K and a low residual Sommerfeld coefficient γ 0 . Applying magnetic fields up to 12 T along the crystallographic axes a, b , and c , we observe highly anisotropic behavior in γ 0 ( H ). Below 4 T, γ 0 ( H ) ≈ γ 0 + λi √H (i = a, b, c) , which is expected for an unconventional superconductor with nodes on the Fermi surface away from the direction of the magnetic field. At 4 T ( a and b axes) and 5.5 T ( c axis), distinctive changes in the behavior of γ 0 (H) suggest that a stable low-field ground state begins to evolve above 4 T. The data analysis indicates that the nodes are located near the a–b plane, with possible order parameters d B2u + iεd B1u or d B2u + iεd Au . Our findings support B 2u as the primary superconducting order parameter in UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Utah FORGE: Direct Shear Test Data for Investigating Seismic Precursors to Shear Failure of Fractures

This dataset includes results of direct shear tests to investigate the mechanical and geophysical response of dry and saturated fractures in Indiana limestone and Sierra White granite. Direct shear tests were performed on tensile-induced fractures in Indiana limestone and Sierra White granite in a custom water-pressurized chamber. The provided Excel files include the representative seismic wave signals and the normalized wave amplitudes of ultrasonic wave transducers. A link to the published journal article presenting the data and describing the experiment in detail is provided as well.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Utah FORGE: Seismic DAS and Geophone Borehole Data Processing and 3D Imaging of Vp/Vs Ratio in the 2024 Stimulated Reservoir

This dataset includes a final report and a 3D velocity model derived from seismic DAS and geophone borehole data collected during the April 2024 stimulation of the reservoir at Utah FORGE. The report details the processing of over 50,000 P- and S-wave travel times used in a tomographic inversion to estimate the Vp/Vs ratio, revealing anomalies adjacent to wells 16A and 16B that may be associated with injected fracturing fluids. Additionally, Wadati analysis of more than 27,000 pairs of differential P- and S-wave travel times supports this interpretation with a high Vp/Vs estimate of 1.86, averaged over the dimensions of the earthquake cluster. The accompanying data file provides a 3D model of P- and S-wave velocities and Vp/Vs ratios, structured with spatial coordinates and velocity values.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Denoising Seismograms in the Time Domain Using a Deep Learning Model

Deep learning has emerged as a transformative tool for enhancing the extraction of reliable information from seismograms, addressing the increasing demand for precise and efficient seismic data analysis. We introduce an innovative encoder–decoder deep learning model, named WaveDenoiser, designed for noise reduction in the time domain, thereby eliminating the need for spectrogram computations that have been used for existing deep learning tools and significantly improving processing speed. Utilizing the benchmark dataset that is Stanford Earthquake Dataset, we developed three models of varying sizes: base, medium, and large. Notably, the large (referred to as WaveDenoiser) model demonstrated superior performance, achieving a median signal‐to‐noise ratio improvement of 8.8 dB on in‐distribution unseen data (in the same geographic region) and 7.7 dB on out‐distribution unseen data (in a new geographic region), outpacing both the base and medium models. Further evaluation of the WaveDenoiser model revealed a reduction in median arrival‐time errors by 0.02 s for P waves and 0.01 s for S waves when processing waveforms prior to phase picking using PhaseNet on in‐distribution unseen data. When tested on out‐distribution unseen data, the model also effectively reduced the P‐wave median arrival‐time error by 0.02 and 0.01 s in median arrival‐time error for S waves. Importantly, the application of WaveDenoiser resulted in a significant reduction of phase picking outliers by 1.1% to 3.6% for both P and S waves. In addition, we achieved over five times acceleration in processing speed compared with the seisBench implementation of DeepDenoiser. Our findings underscore the potential of WaveDenoiser as a powerful tool for improving seismic data analysis and processing efficiency.

P-waves↗

DOE OSTI2024

Evaluating Physics-Informed Neural Network Performance for Seismic Discrimination between Earthquakes and Explosions

In this article, we evaluate adding a weak physics constraint, that is, a physics‐based empirical relationship, to the loss function with a physics‐informed manner in local distance explosion discrimination in the hope of improving the generalization capability of the machine learning (ML) model. We compare the proposed model with the two‐branch model we previously developed, as well as with a pure data‐driven model. Unexpectedly, the proposed model did not consistently outperform the pure data‐driven model. By varying the level of inconsistency in the training data, we find this approach is modulated by the strength of the physics relationship. In conclusion, this result has important implications for how to best incorporate physical constraints in ML models.

58 GEOSCIENCES↗