Results for “Organic electronics” — Page 4

DOE OSTI2022

Machine learning prediction of glass transition temperature of conjugated polymers from chemical structure

Predicting the glass transition temperature (T g ) is of critical importance as it governs the thermomechanical performance of conjugated polymers (CPs). Here, we report a predictive modeling framework to predict T g of CPs through the integration of machine learning (ML), molecular dynamics (MD) simulations, and experiments. With 154 T g data collected, an ML model is developed by taking simplified “geometry” of six chemical building blocks as molecular features, where side-chain fraction, isolated rings, fused rings, and bridged rings features are identified as the dominant ones for T g . MD simulations further unravel the fundamental roles of those chemical building blocks in dynamical heterogeneity and local mobility of CPs at a molecular level. The developed ML model is demonstrated for its capability of predicting T g of several new high-performance solar cell materials to a good approximation. The established predictive framework facilitates the design and prediction of T g of complex CPs, paving the way for addressing device stability issues that have hampered the field from developing stable organic electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Surface Equilibration Mechanism Controls the Stability of a Model Codeposited Glass Mixture of Organic Semiconductors

While previous work has identified the conditions for preparing ultrastable single-component organic glasses by physical vapor deposition (PVD), little is known about the stability of codeposited mixtures. Here, we prepared binary PVD glasses of organic semiconductors, TPD (N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine) and m-MTDATA (4,4',4"-Tris[phenyl(m-tolyl)amino]triphenylamine), with a 50:50 mass concentration over a wide range of substrate temperatures (T sub ). The enthalpy and kinetic stability are evaluated with differential scanning calorimetry and spectroscopic ellipsometry. Binary organic semiconductor glasses with exceptional thermodynamic and kinetic stability comparable to the most stable single-component organic glasses are obtained when deposited at T sub = 0.78–0.90T g (where T g is the conventional glass transition temperature). When deposited at 0.94T g , the enthalpy of the m-MTDATA/TPD glass equals that expected for the equilibrium liquid at that temperature. Thus, the surface equilibration mechanism previously advanced for single-component PVD glasses is also applicable for these codeposited glasses. Furthermore, these results provide an avenue for designing high-performance organic electronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Structural and Electronic Effect Driven Distortions in Visible Light Absorbing Polar Materials A Ta 2 V 2 O 11 ( A = Sr, Pb)

Complex vanadates of tantalum(V), such as ATa 2 V 2 O 11 (A = Sr, Pb), are rare and underrated materials, which have potential application domains that could be substantially expanded, mitigating the existing controversy on their atomic and electronic organization. Herein, we present a thorough structural examination combining synchrotron powder X-ray diffraction-aided distortion mode analysis with computational methods to study hettotypes of SrTa 2 V 2 O 11 (STVO) and PbTa 2 V 2 O 11 (PTVO). Being distinct from the perovskite family due to the presence of [VO 4 ] groups, both compounds are polar dielectric materials with certain similarities to SBT and PBT Aurivillius phases. Applying the model of anions of metallic matrices to the analysis of electron localization functions calculated on top of as-established equilibrium structures helps retrace the effects in the Sr and Pb surroundings on the respective crystal packings of STVO and PTVO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Solvent-Free Coating of Organic Semiconductor Membranes with Centimetric Crystalline Domains

Organic semiconductors (OSCs) have shown great promise in a variety of applications. Although solution processing of OSCs has resulted in high-quality films, exquisite control of structural development to minimize defect formation during large-scale fabrication remains formidable. Compounding this challenge is the use of halogenated organic solvents, which poses significant health and environmental hazards. However, the solvent-free techniques introduced thus far impose additional limitations on solidification kinetics; the resulting OSC thin films are often more defective than those processed from solution. Here, a solvent-free technique is reported to prepare OSC membranes with centimetric crystalline domains. Leveraging the tendency for liquid crystalline materials to preferentially orient, OSCs are “prealigned” by depositing them from the melt over a metal frame to form a freely suspended membrane. Additionally, crystallization from this prealigned phase affords membranes with unprecedented structural order across macroscopic distances. Field-effect transistors comprising membranes of dioctyl[1]-benzothieno[3,2-b][1]benzothiophene (C8BTBT) and didodecyl[1]-benzothieno[3,2-b][1]benzothiophene (C12BTBT) having centimeter-sized domains as active layers exhibit a hole mobility of ≈8.6 cm2 V -1 s -1 , superseding the mobility of any transistors whose active layers are deposited from melt. This technique is scalable to yield membranes with large crystalline domains over wafer dimensions, making it amenable for broad applications in large-area organic electronics.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Advanced Heterogeneous Integration Enabled by 3D Freestanding Membranes—From Material Growths to Applications

For the future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, the need for flexibility and stackability of electronic products has substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically compliant and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. Such performance-mechanical compliance dilemma could be resolved by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. Such dream electronic systems could be realized by producing single-crystalline freestanding membranes. For the past few decades, various layer transfer techniques (a.k.a layer liftoff techniques) have been developed to produce single-crystalline freestanding membranes. In today's talk, I will present the survey of the layer liftoff techniques and go over how these strategies unlock new ways of manufacturing advanced electronic systems. In addition, I will introduce unprecedented artificial heterostructure devices enabled by stacking of those freestanding 3D material membranes, e.g., the world's smallest vertically-stacked full-color micro-LEDs, the world's best multiferroic devices, chip-less wireless e-skin, and reconfigurable hetero-integrated chips with AI accelerators.

Kim, Jeehwan↗

DOE OSTI2022

Advanced Heterogeneous Integration Enabled by 3D Freestanding Membranes—From Material Growths to Applications

For the future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, the need for flexibility and stackability of electronic products has substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically compliant and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. Such performance-mechanical compliance dilemma could be resolved by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. Such dream electronic systems could be realized by producing single-crystalline freestanding membranes. For the past few decades, various layer transfer techniques (a.k.a layer liftoff techniques) have been developed to produce single-crystalline freestanding membranes. In today's talk, I will present the survey of the layer liftoff techniques and go over how these strategies unlock new ways of manufacturing advanced electronic systems. In addition, I will introduce unprecedented artificial heterostructure devices enabled by stacking of those freestanding 3D material membranes, e.g., the world's smallest vertically-stacked full-color micro-LEDs, the world's best multiferroic devices, chip-less wireless e-skin, and reconfigurable hetero-integrated chips with AI accelerators.

Kim, Jeehwan↗

DOE OSTI2022

2D material-based layer transfer: Challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

Kim, Jeehwan↗

DOE OSTI2022

Two-dimensional material based layer transfer: challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

KIM, JEEHWAN↗

NASA NTRS1992

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 14: Engineering work and information use in aerospace: Results of a telephone survey

A telephone survey of U.S. aerospace engineers and scientists who were on the Society of Automotive Engineers (SAE) mailing list was conducted between August 14-26, 1991. The survey was undertaken to obtain information on the daily work activities of aerospace engineers and scientists, to measure various practices used by aerospace engineers and scientists to obtain STI, and to ask aerospace engineers and scientists about their use of electronic networks. Co-workers were found important sources of information. Co-workers are used to obtain technical information because the information they have is relevant, not because co-workers are accessible. As technical uncertainty increases, so does the need for information internal and external to the organization. Electronic networks enjoy widespread use within the aerospace community. These networks are accessible and they are used to contact people at remote sites. About 80 percent of the respondents used electronic mail, file transfer, and information or data retrieval to commercial or in-house data bases.

Pinelli, Thomas E.↗

DOE OSTI2024

Covalency-Driven Differences in the Hydrogenation Chemistry of Lanthanide- and Actinide-Based Frustrated Lewis Pairs

The electronic organization of Frustrated Lewis Pairs (FLPs) allows them to activate strong bonds in mechanisms that are usually free of redox events at the Lewis acidic site. The unique 6d/5f manifold of uranium could serve as an interesting FLP acceptor site, but to date FLP-like catalysis with actinide ions is unknown. In this paper, the catalytic, FLP-like hydrogenation reactivity of trivalent uranium complexes is explored in the presence of base-stabilized silylenes. Comparison to isoelectronic, isostructural lanthanide and thorium complexes lends insight into the electronic factors governing dihydrogen activation. Mechanistic studies of the uranium- and lanthanide-catalyzed hydrogenations are presented, including discussion of likely intermediates. Computational modeling of the f-element complexes, combined with experimental comparison to p-block Lewis acids, elucidates the relevance of steric hindrance to productive reactivity with dihydrogen. As a result, consideration of the complete experimental and theoretical evidence provides a clear picture of the electronic and steric factors governing dihydrogen activation by these FLPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Automated TEM Reveals Intercrystalline Correlations of Conjugated Polymers

Transmission electron microscopy (TEM) continues to transform polymer science by revealing key aspects of chain packing, phase separation and nanoscale structure. The development of instrumentation and data analyses tools is driving the field forward and enabling new experiments. Here, we use automated high-resolution TEM (HRTEM) and image processing to identify the structure of a conjugated polymer used in organic electronics. Analysis of more than 600 HRTEM images reveals lattice parameters and orientation correlations between crystals, including the preferred alignment of neighboring crystals along the same crystallographic direction that is likely the result of liquid crystalline order.

Fair, Ryan A. [Pennsylvania State University, Univ↗

DOE OSTI2024

How Rigid Are Anthranilamide Molecular Electrets?

As important as molecular electrets are for electronic materials and devices, conformational fluctuations strongly impact their macrodipoles and intrinsic properties. Herein, we employ molecular dynamics (MD) simulations with the polarizable charge equilibrium (PQEq) method to investigate the persistence length (L P ) of molecular electrets composed of anthranilamide (Aa) residues. The PQEq-MD dissipates the accepted static notions about Aa macromolecules, and L P represents the shortest Aa rigid segments. The classical model with a single L P value does not describe these oligomers. Introducing multiple L P values for the same macromolecule follows the observed trends and discerns the enhanced rigidity in their middle sections from the reduced stiffness at their terminal regions. Furthermore, L P distinctly depends on solvent polarity. The Aa oligomers maintain extended conformations in nonpolar solvents with L P exceeding 4 nm, while in polar media, increased conformational fluctuations reduce L P to about 2 nm. These characteristics set key guidelines about the utility of Aa conjugates for charge-transfer systems within organic electronics and energy engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Diabatization with Electrostatic Embedding for Studying Photophysics in Organic Molecular Crystals

Highly emissive organic molecular crystals find applications in several areas, such as organic electronics, solar cells, and sensors. Understanding the excited-state mechanisms underlying these applications is essential for optimizing and controlling them effectively. Exciton models coupled with nonadiabatic dynamics, particularly quantum dynamics, provide crucial insights into photochemical and photophysical processes in molecular crystals. Nevertheless, there remains a lack of general tools and automated workflows to facilitate such simulations. In this paper, we present a computational strategy to investigate the photoactivated dynamics of organic molecular crystals, bridging methodologies traditionally used for molecular systems and materials science, with a particular focus on the interplay between local excitations and charge transfer (CT) processes. We have implemented an interface between the fromage and Overdia programs, enabling the construction of vibronic Hamiltonians for molecular crystals within an excited-state ONIOM(QM:QM′) framework, incorporating long-range electrostatics through a RESP-based Ewald summation. Fragment-based diabatization provides a route to quantum dynamics simulations in weak-to-intermediate coupling regimes. The method was applied to the photophysics of dibenzo[g,p]chrysene (DBC) crystals using time-dependent DFT. The fromage/ Overdia interface was employed to compute the couplings of local excitations and CT states for 18 unique DBC dimers in the crystal and to quantify the influence of electrostatic embedding, which was found to be modest (10−20%). Simulations on π-stacked dimers reproduced the small red shift observed experimentally from solution to crystal, attributed to electronic interactions among fixed monomers rather than crystal electrostatics. Quantum dynamics simulations revealed ultrafast population transfer from bright local excitations to CT states. This approach establishes a robust framework linking molecular and solid-state excited-state dynamics, with potential applications for studying excitations, defects, and impurities in molecular crystals.

Crystals↗

NASA NTRS2002

Using the Web for Competitive Intelligence (CI) Gathering

Businesses use the Internet as a way to communicate company information as a way of engaging their customers. As the use of the Web for business transactions and advertising grows, so too, does the amount of useful information for practitioners of competitive intelligence (CI). CI is the legal and ethical practice of information gathering about competitors and the marketplace. Information sources like company webpages, online newspapers and news organizations, electronic journal articles and reports, and Internet search engines allow CI practitioners analyze company strengths and weaknesses for their customers. More company and marketplace information than ever is available on the Internet and a lot of it is free. Companies should view the Web not only as a business tool but also as a source of competitive intelligence. In a highly competitive marketplace can any organization afford to ignore information about the other players and customers in that same marketplace?

Rocker, JoAnne↗

DOE OSTI2022

Crystal engineering of heterocyclic arylene(ethynylene) oligomers through programmed aromatic stacking

Conjugated oligomers and polymers consisting of aromatic heterocycles are examples of next-generation organic electronic materials. However, control and optimization of the self-assembly of these materials in the solid-state, which is a crucial parameter for high efficiency performance, remains an unsolved challenge in materials development. In this work, we provide valuable insight into aromatic stacking interactions between fluorinated arene rings (ArF) and heterocycles with different electronic character (Het), and elaborate on the prospect of using these interactions to control the solid-state configurations of three-ring phenyleneethynylene oligomers (PEs). Oligomers possessing heterocycles typically thought of as electron-rich (ER) show blue-shifted optical spectra in the solid-state, while those incorporating heterocycles typically thought of us electron deficient (ED) show red-shifted solid-state optical spectra. Crystal structures show ArF-Het stacking interactions between the fluorinated side-chains and ER units, which twist the backbone out of planarity and prevent chromophore aggregation. Further, the interactions are absent in ED oligomers, highlighting cofacial incompatibility between ArF rings and ED units. A combination of TD-DFT computations and novel heterocycle descriptors reinforce our assignment of the oligomers as ED or ER, while exhaustive conformer analysis shows ArF-Het stacking interactions are a significant contributor to compound stability. Overall, this work describes the importance of heterocycle electronics in conformational control in the solid state, understanding of which can be a valuable asset in the development of novel optoelectronic materials.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers

Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.

Conjugated polymers↗

DOE OSTI2022

Pyromellitic diimide based bipolar molecule for total organic symmetric redox flow battery

Non-aqueous redox flow batteries based on total organic electrolytes, consisting of earth-abundant elements, i.e., C, H, N, O, are regarded as a promising technology for sustainable and large-scale energy storage. In particular, bipolar redox-active organic materials (BROMs) are distinctly fascinating as electroactive species because they have multiple oxidation states and can undergo multiple redox processes. By virtue of this unique characteristic, BROMs can be utilized as both anolyte and catholyte in symmetric flow batteries, consequently, helping alleviate cross-contamination issues. Here, in this paper, we report an all-organic symmetric redox flow battery based on diimide molecule as a bipolar electroactive material. The potential interval between the cathodic peak and the inner and outer anodic peaks led to a promising cell voltage of 2.22 V. The symmetric battery can be operated at a current density of 20 mA cm -2 , with a coulombic efficiency of 90% for over 100 cycles. This work proposes an alternative approach to designing multi-electron organic redox active materials to facilitate the advancement of high-density symmetric flow batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Direct Evidence for Excited Ligand Field State-based Oxidative Photoredox Chemistry of a Cobalt(III) Polypyridyl Photosensitizer

Increasing interest in sustainable chemistry coupled with the quest to explore new reactivity has spurred research on first-row transition metal complexes for potential applications in a variety of settings. One of the more active areas of research is photoredox catalysis, where the synthetically tunable nature of their electronic structures provides a rich palette of options for tailoring their reactivity to a desired chemical transformation. Understanding the mechanism of excited-state reactivity is critical for the informed development of next-generation catalysts, which in turn requires information concerning the propensity of their electronic excited states to engage in the desired electron or energy transfer processes. Herein we provide direct evidence of the highly oxidizing nature of the lowest-energy ligand-field (LF) excited state of a first-row d 6 -low-spin Co(III) photosensitizer [Co(4,4'-Br 2 bpy) 3 ] 3+ (where 4,4'-Br 2 bpy is 4,4'-dibromo-2,2'-bipyridine). The redox potential associated with the LF excited state of the Co(III) complex was bracketed by performing bimolecular quenching studies by using a series of simple organic electron donors. Time-resolved absorption spectroscopy confirmed a dynamic quenching process attributed to reductive quenching of the lowest-energy ligand-field excited state of the Co(III) chromophore. Analysis of the Stern–Volmer plots for each chromophore-quencher pair revealed a limiting value of E red * ~ 1.25 V vs Fc/Fc + for the metal-centered excited state, which is significantly stronger than that of more commonly employed transition metal-based photoredox agents such as [Ru(bpy) 3 ] 2+ (E red * = 0.32 V vs Fc/Fc + ) and [Ir(ppy) 2 (bpy)] + (E red * = 0.27 V vs Fc/Fc + ). Finally, these results suggest that this class of chromophores could find utility in applications requiring the activation of oxidatively resistant organic substrates for photoredox catalysis.

14 SOLAR ENERGY↗