Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORBITAL LAUNCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

NASA's Capture, Containment, and Return System: Bringing Mars Samples to Earth

The Mars Sample Return (MSR) campaign is one of the most ambitious and complex planetary science exploration missions ever pursued. With the participation of NASA, ESA, and many industry partners, MSR aims to bring Martian rock and atmosphere samples to Earth with the goal of answering key questions about Mars’ geological, climatological and, potentially, biological evolution. To accomplish this ambitious goal, the MSR campaign relies on three distinct flight elements and a ground element. The Earth Return Orbiter mission that would host the Capture, Containment, and Return System (CCRS) is the last flight element of the trio. The mission would capture the orbiting sample in low Mars orbit (launched into orbit by another mission), contain it, and return it to Earth, landing at the Utah Test and Training Range. Since its early architecture, several changes were adopted by CCRS to improve overall payload efficiency and reduce mass. This paper will discuss the CCRS design, how the current CCRS architecture contributes to an improved mission concept, and the next critical steps of the mission toward its launch.

Mars mission↗
NASA NTRS1993

STS-56 Atlas-2/Breakfast, Suit-up, Depart O&C, Launch, On Orbit, Landing with ISOS

Footage of various stages of the STS-56 Discovery launch is shown, including shots of the crew at breakfast, getting suited up, and departing to board the Orbiter. The launch is shown from many vantage points, as is the landing. The deployment of Spartan-201 is seen against a backdrop of northeast Africa and Egypt. Kentucky is seen at night, as are New York City, Atlanta, and Philadelphia.

Source record↗
NASA NTRS2005

Pressurization System Modeling for a Generic Bimese Two- Stage-to-Orbit Reusable Launch Vehicle

A pressurization system model was developed for a generic bimese Two-Stage-to-orbit Reusable Launch Vehicle using a cross-feed system and operating with densified propellants. The model was based on the pressurization system model for a crossfeed subscale water test article and was validated with test data obtained from the test article. The model consists of the liquid oxygen and liquid hydrogen pressurization models, each made up of two submodels, Booster and Orbiter tank pressurization models. The tanks are controlled within a 0.2-psi band and pressurized on the ground with ambient helium and autogenously in flight with gaseous oxygen and gaseous hydrogen. A 15-psi pressure difference is maintained between the Booster and Orbiter tanks to ensure crossfeed check valve closure before Booster separation. The analysis uses an ascent trajectory generated for a generic bimese vehicle and a tank configuration based on the Space Shuttle External Tank. It determines the flow rates required to pressurize the tanks on the ground and in flight, and demonstrates the model's capability to analyze the pressurization system performance of a full-scale bimese vehicle with densified propellants.

Mazurkivich, Pete↗
NASA NTRS1994

Measurement of the frequency stability of responders in aircraft

Measurement on an aircraft orbit, such as a satellite launching orbit, is made by the responder in the aircraft along with several remote track stations on the ground. During the launching, the system is required to have precise time synchronization and frequency accuracy. At the same time, accurate measurement of aircraft velocity requires high frequency stability of the system. However, atomic frequency standards in the ground stations supply time and frequency reference standard with excellent long term and short term frequency stability for the above-mentioned goals. The stability of responder is also an important factor affecting the performance of the system and there are more requirements for the corresponding time/frequency measurements. In the system, the responders do not use continuous wave (CW) but narrow pulse modulated wave; consequently, the characterization theory of their stability is more complicated and the measurement technique is more difficult for pulsed wave than that for CW. A systematic characterization theory of the frequency stability for pulsed wave is demonstrated and the measuring methods are discussed. The measurement systems, which have been set up in Beijing Institute of Radio Metrology and Measurement (BIRMM) and can be used to test the frequency stability of pulse coherent responders in time domain and frequency domain with high sensitivity and accuracy, are described. Using these measurement systems, successful measurements for the responders were made with which the satellite launching orbits were precisely obtained and tracked.

Liu, Xiaofan↗
NASA NTRS1991

Conceptual design of two-stage-to-orbit hybrid launch vehicle

The object of this design class was to design an earth-to orbit vehicle to replace the present NASA space shuttle. The major motivations for designing a new vehicle were to reduce the cost of putting payloads into orbit and to design a vehicle that could better service the space station with a faster turn-around time. Another factor considered in the design was that near-term technology was to be used. Materials, engines and other important technologies were to be realized in the next 10 to 15 years. The first concept put forth by NASA to meet these objectives was the National Aerospace Plane (NASP). The NASP is a single-stage earth-to-orbit air-breathing vehicle. This concept ran into problems with the air-breathing engine providing enough thrust in the upper atmosphere, among other things. The solution of this design class is a two-stage-to-orbit vehicle. The first stage is air-breathing and the second stage is rocket-powered, similar to the space shuttle. The second stage is mounted on the top of the first stage in a piggy-back style. The vehicle takes off horizontally using only air-breathing engines, flies to Mach six at 100,000 feet, and launches the second stage towards its orbital path. The first stage, or booster, will weigh approximately 800,000 pounds and the second stage, or orbiter will weigh approximately 300,000 pounds. The major advantage of this design is the full recoverability of the first stage compared with the present solid rocket booster that are only partially recoverable and used only a few times. This reduces the cost as well as providing a more reliable and more readily available design for servicing the space station. The booster can fly an orbiter up, turn around, land, refuel, and be ready to launch another orbiter in a matter of hours.

Source record↗
NASA NTRS1979

Navigation and attitude reference for autonomous satellite launch and orbital operations

The navigation and attitude reference performance of a strapdown system are investigated for applications to autonomous satellite launch and orbital operations. It is assumed that satellite payloads are integrated into existing missile systems and that the boost, orbit insertion, and in-orbit operation of the satellite are performed autonomously without relying on external support facilities. Autonomous and long term accurate navigation and attitude reference are provided by a strapdown inertial navigation system aided by a star sensor and earth landmark sensor. Sensor measurement geometry and navigation and attitude update mechanizations are discussed. Performance analysis data are presented for following functional elements: (1) prelaunch alignment; (2) boost navigation and attitude reference; (3) post boost stellar attitude and navigation updates; (4) orbital navigation update using sensor landmark measurements; and (5) in-orbit stellar attitude update and gyro calibration. The system performances are shown to satisfy the requirements of a large class of satellite payload applications.

Kau, S. P.↗
NASA NTRS1993

Aerodynamic predictions and experimental results for an Advanced Manned Launch System orbiter configuration

The results from a series of wind-tunnel tests are presented along with predictions of the aerodynamic characteristics for a proposed Advanced Manned Launch System orbiter configuration. The predicted characteristics were made using the Aerodynamic Preliminary Analysis System (APAS), and were shown to be of sufficient accuracy for use in preliminary configuration analysis. Various methods of analysis were used in the APAS system, and the results of each were compared with the wind-tunnel dam. The accuracy of the predicted data varied over the Mach range studied. The best agreement between the wind-tunnel data and the APAS predictions occurr4ed in the low subsonic and the high supersonic regimes, while the low supersonic predictions resulted in only fair agreement. The APAS paneled-body analysis method (low speed) and the HABP impact analysis method (high speed) gave the most accurate results when compared against the experimental data.

Engelund, Walter C.↗
NASA NTRS2001

Trends and Options in the Disposal of Launch Vehicle Orbital Stages

An increasing number of agencies and organizations around the world provide guidelines for the disposal of launch vehicle stages placed in Earth orbit. The limitation of orbital lifetime following the satellite delivery mission, particularly in low Earth orbit, is viewed as one of the most important space debris mitigation measures. For higher altitude missions, orbital stages may be maneuvered into more rapidly decaying orbits or may be left in longer-term disposal orbits. This paper summarizes the recent disposal practices of all launch vehicle types and evaluates their compliance with existing national standards. Although the owners and operators of some satellite systems, e.g., Iridium and Globalstar, have levied orbital stage disposal requirements on launch service providers, in general, insufficient attention and communication is given to this topic. Sunsynchronous and geosynchronous missions may pose some of the most difficult challenges for the responsible disposal of orbital stages. A variety of disposal options are normally available, some of which may even influence the design of the spacecraft to be deployed. Also at issue is whether normal launch vehicle propellant reserves can be relied upon for post-mission disposal of orbital stages.

Johnson, Nicholas L.↗
NASA NTRS2007

The Mars Reconnaissance Orbiter Mission: From Launch to the Primary Science Orbit

The Mars Reconnaissance Orbiter (MRO) was launched from Cape Canaveral Air Force Station, Florida, USA, aboard an Atlas V-401 launch vehicle on August 12, 2005. The MRO spacecraft carries a very sophisticated scientific payload. Its primary science mission is to to provide global, regional survey, and targeted observations from a low altitude orbit for one Martian year (687 Earth days). After a seven month interplanetary transit, the spacecraft fired its six main engines and established a highly elliptical capture orbit at Mars. During the post-MOI early check-out period, four instruments acquired engineering-quality data. This was followed by five months of aerobraking operations. After aerobraking was terminated, a series of propulsive maneuvers were used to establish the desired low altitude science orbit. As the spacecraft is readied for its primary science mission, spacecraft and instrument checkout and deployment activities have continued.

orbiters↗
NASA NTRS1999

STS-96 Meal - Suit Up - Depart O and C C7 Discovery Launch - On Orbit - Landing - Isos

Footage of various stages of the STS-96 (Commander Kent Rominger; Pilot Rick Husband; Mission Specialist 1 Tamara Jernigan; Mission Specialist 2 Ellen Ochoa; Mission Specialist 3 Daniel Barry; Mission Specialist 4 Julie Payette; Mission Specialist 5 Valery Tokarev) Discovery launch is shown, including shots of the crew at breakfast, getting suited up, and departing to board the Orbiter. The launch and the landing are seen from many vantage points. On-board activities shown include: the approach and docking with the International Space Station, the payload transfer, the entering of the International Space Station Unity module, and the undocking of the Discovery from the International Space Station.

Source record↗
NASA NTRS1991

Space Shuttle Orbiter auxiliary power unit status

An overview of the United States Space Shuttle Orbiter APU, which provides power to the Orbiter vehicle hydraulic system, is presented. Three complete APU systems, each with its own separate fuel system, supply power to three dedicated hydraulic systems. These in turn provide power to all Orbiter vehicle critical flight functions including launch, orbit, reentry, and landing. The basic APU logic diagram is presented. The APU includes a hydrazine-powered turbine that drives a hydraulic pump and various accessories through a high-speed gearbox. The APU also features a sophisticated thermal management system designed to ensure safe and reliable operation in the various launch, orbit, reentry, and landing environments.

Reck, M.↗
NASA NTRS1961

Effects of Some Typical Geometrical Contraints on Lunar Trajectories

A study has been made to determine the effects on lunar trajectories of some typical geometrical constraints. The constraints considered in this study are of two types, those resulting from specification of the trajectory characteristics near the earth and those associated with the specification of the approach conditions at the moon. The effects of the constraints are discussed from the standpoint of the limitations imposed by the constraints on the possible launch days during the month and also on the possible launch times during the day for three types of launch trajectories: direct-ascent, coasting-orbit, and parking-orbit launches. Application of the various constraints individually or in combination seriously restricts the allowable launch times during the month and day for the direct-ascent launch; whereas, less serious restrictions result for the coasting- and parking-orbit launches.

Tolson, Robert H.↗
NASA NTRS1995

Advanced transportation system studies technical area 2(TA-2): Heavy lift launch vehicle development: Executive summary - volume 1

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 1, provides a summary description of the technical activities that were performed over the entire contract duration, covering three distinct launch vehicle definition activities: heavy-lift (300,000 pounds injected mass to low Earth orbit) launch vehicles for the First Lunar Outpost (FLO), medium-lift (50,000-80,000 pounds injected mass to low Earth orbit) launch vehicles, and single-stage-to-orbit (SSTO) launch vehicles (25,000 pounds injected mass to a Space Station orbit).

McCurry, J.↗
NASA NTRS1989

Analytic solution for vertical launch into orbit

An approximate analytic solution is presented for the motion and heating of nonlifting spacecraft launched vertically for ascending flight through the atmosphere into earth orbit. The solution is based on Chapman's Z-function transformation of the equations of motion with the assumption of an exponential atmosphere. The transformed equations have been modified to include the effects of thrusting with mass loss. It is assumed that the vehicle negotiates a gravity turn during ascent so that the thrust vector is aligned in the flight-path direction. Numerical results are presented to document the analytic solution and provide evidence of the useful information generated by it.

Boltz, Frederick W.↗
NASA NTRS1979

Near-field sonic-boom pressure signatures for the space shuttle launch and orbiter vehicles at Mach 6

Static-pressure signatures parallel to the flight path of the launch and entry configurations of the space shuttle were measured. The launch configurations, consisting of an equivalent body of revolution (representing the orbiter and external fuel tank) with a solid exhaust gas plume attached, was tested at an angle of attack of 0 deg. The entry configuration (orbiter only) was tested over an angle-of-attack range from 10 deg to 40 deg. Calculated pressure signatures were in good agreement with measured signatures for both configurations.

Ashby, G. C., Jr.↗
NASA NTRS1962

Rendezvous Guidance Technology

The literature on rendezvous guidance technology is reviewed and a bibliography of about 160 documents is presented. The importance of the proper selection of the ascent trajectory and of the orbit for a manned space station or an orbiting launch complex is emphasized. The way the launch delay problem affects the selection of the ascent trajectory and the target orbit is discussed. A specific ascent trajectory and an orbit for a manned space station or an orbiting launch complex is recommended on the premise that launch delay problems will continue to outweigh most of the other orbit selection criteria. A new method for determining the velocity corrections required for mid-course guidance is proposed . The proposed methods consist of an "exact-numerical" solution of the relative equations of motion in the "Shell-coordinate system." The proposed "exact-numerical" method extends the applicability of the mid- course equations to a much greater range than that of the currently available linear methods .

Trajectory↗