Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ni”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Tungsten solution kinetics and amorphization of nickel in mechanically alloyed Ni-W alloys

The kinetics of solution of W, and the subsequent amorphization of Ni, in mechanically alloyed Ni-W alloys has been investigated. As W is a highly abrasive material in the energy intensive devices used for mechanical alloying, we studied the above reactions in different mills. One used hardened steel balls as the grinding media, and the other Al2O3. Abrasion is common to both mills, but Fe wear debris from the hardened steel enters into solution in the Ni rich phases whereas Al2O3 debris is present as small dispersoids. The kinetics of W solution and those of subsequent amorphization do not appear strongly affected by the Fe in solution or the Al2O3 dispersoid. Tungsten dissolves in crystalline Ni in amounts in excess of the equilibrium solubility during alloying. Amorphization of the Ni phase occurs if the W content in this phase exceeds ca. 28 at. pct.

Aning, A. O.↗
NASA NTRS1994

Growth of Au on Ni(110): a BFS Modelling of Surface Alloy Phases

Recent experiments using scanning tunneling microscopy show evidence for the formation of surface alloys of otherwise immiscible metals. Such is the case for Au deposited in Ni(11), where experiments by Pleth Nielsen et al. indicate that at low Au coverage (less than 0.5 ML), Au atoms replace Ni atoms in the surface layer forming a surface alloy while the Ni atoms form islands on the surface. In this work, we present results of a theoretical modeling of this phenomenon using the recently developed BFS method for alloys. We provide results of an extensive analysis of the growth process which strongly support the conclusions drawn from the experiment; at very low coverages, there is tendency for dimer formation on the overlayer, which later exchange positions with Ni atoms in the surface layer, thus accounting for the large number of substituted dimers. Ni island formations as well as other alternative short range order patterns are discussed.

Bozzolo, Guillermo↗
NASA NTRS1994

The discovery of Ni V in the photospheres of the hot DA white dwarfs RE 2214-492 and G191-B2B

We have co-added six recently obtained International Ultraviolet Explorer (IUE) echelle spectra of the hot DA white dwarf RE 2214-492 and 10 existing archive spectra of the well-known hot DA, G191-B2B. We find that both stars contain numerous weak features due to Ni V. Nickel is thus the second iron-group element to be found in the spectra of the very hottest DA white dwarfs. In addition to Ni V, we also observe Al III in both stars and present evidence for the possible presence of Ni IV and Fe IV in RE 2214-492. The presence of Ni and Al, together with previously reported elements, will contribute significantly to both the EUV opacity and to the apparent complexity of the UV spectra of these stars. Using Non-Local Thermodynamic Equilibrium (NLTE) model atmospheres we estimate the Ni abundances in RE 2214-492 the G191-B2B to be log(Ni/H) = -5.5 +/- 0.3 and -6.0 +/- 0.3, respectively.

Holberg, J. B.↗
NASA NTRS1995

Growth of Au on Ni(110): A Semiempirical Modeling of Surface Alloy Phases

Recent experiments using scanning tunneling microscopy show evidence for the formation of surface alloys of otherwise immiscible metals. Such is the case for Au deposited in Ni(110), where experiments by Pleth Nielsen el al.indicate that at low Au coverage (less than 0. 5 ML), Au atoms replace Ni atoms in the surface layer forming a surface alloy while the Ni atoms form islands on the surface. In this paper, we present results of a theoretical modeling of this phenomenon using the recently developed Bozzolo-Ferrante-Smith method for alloys. We provide results of an extensive analysis of the growth process that strongly support the conclusions drawn from the experiment: at very low coverages, there is a tendency for dimer formation on the overlayer, which later exchange positions with Ni atoms in the surface layer, thus accounting for the large number of substituted dimers. Ni island formation as well as other alternative short-range-order patterns are discussed.

Bozzolo, Guillermo↗
NASA NTRS1992

An APFIM/AEM Study of Phase Decompositions in Fe-Ni Alloys at Low Temperatures

A combined atom probe field ion microscopy and analytical electron microscopy characterization has been performed on laboratory aged martensitic and austenitic specimens of FeNi and FeNiP alloys. These techniques revealed that the martensitic 24.1 and 28.6 at.% Ni alloys decomposed during aging for 1 year at 300 C to form face centered cubic precipitates of approx. 56 at.% Ni in a body centered cubic matrix containing approx. 20 at.% Ni. Some thin platelets were observed in the field ion micrographs of the austenitic Fe-42.9 at. % Ni alloy and the Fe-43.2 at.% Ni-0.44 at.% P alloy after aging at 400 and 350 C. Atom probe analysis revealed phosphorus clustering in the ternary alloy aged at 300 C.

Zhang, J.↗
NASA NTRS2007

Solidification Behavior of gamma'-Ni3Al Containing Alloys in the Ni-Al-O System

The chemical activities of Al and Ni in gamma(prime)-Ni3Al-containing systems were measured using the multi-cell Knudsen effusion-cell mass spectrometry technique (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K. From these measurements a better understanding of the equilibrium solidification behaviour of gamma(prime)-Ni3Al-containing alloys in the Ni-Al-O system was established. Specifically, these measurements revealed that (1) gamma(prime)-Ni3Al forms via the peritectiod reaction, gamma + Beta (+ A12O3) = gamma (prime) (+ Al2O3), at 1633 +/- 1 K, (2) the {gamma + Beta + Al2O3} phase field is stable over the temperature range 1633 through 1640 K, and (3) equilibrium solidification occurs by the eutectic reaction, L (+ Al2O3) = gamma + Beta (+ Al2O3), at 1640 +/- 1 K and a liquid composition of 24.8 +/- 0.2 at.%Al (at an unknown oxygen content). When projected onto the Ni-Al binary, this behaviour is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady-state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma(prime)-Ni3Al phase field.

Copland, Evan↗
NASA NTRS2009

Effects of Tantalum on the Temporal Evolution of a Model Ni-Al-Cr Superalloy During Phase Decomposition

The effects of a 2.0 at.% addition of Ta to a model Ni-10.0Al-8.5Cr (at.%) superalloy aged at 1073 K are assessed using scanning electron microscopy and atom-probe tomography. The gamma'(Ll2)-precipitate morphology that develops as a result of gamma-(fcc)matrix phase decomposition is found to evolve from a bimodal distribution of spheroidal precipitates, to {001}-faceted cuboids and parallelepipeds aligned along the elastically soft {001}-type directions. The phase compositions and the widths of the gamma'-precipitate/gamma-matrix heterophase interfaces evolve temporally as the Ni-Al-Cr-Ta alloy undergoes quasi-stationary state coarsening after 1 h of aging. Tantalum is observed to partition preferentially to the gamma'-precipitate phase, and suppresses the mobility of Ni in the gamma-matrix sufficiently to cause an accumulation of Ni on the gamma-matrix side of the gamma'/gamma interface. Additionally, computational modeling, employing Thermo-Calc, Dictra and PrecipiCalc, is employed to elucidate the kinetic pathways that lead to phase decomposition in this concentrated Ni-Al-Cr-Ta alloy.

Booth, Morrison, Christopher↗
NASA NTRS1977

Weldability of high toughness Fe-12% Ni alloys containing Ti, Al or Nb

Three exceptionally high-toughness Fe-12%Ni alloys designed for cryogenic service were welded using the GTA welding process. Evaluation of weldability included equivalent energy (KIed) fracture toughness tests, transverse-weld tensile tests at -196 and 25 C and weld crack sensitivity tests. The Fe-12%Ni-0.25%Ti alloy proved extremely weldable for cryogenic applications, having weld and HAZ properties comparable with those of the wrought base alloy. The Fe-12%Ni-0.5%Al had good weld properties only after the weld joint was heat treated. The Fe-12%Ni-0.25%Nb alloy was not considered weldable for cryogenic use because of its poor weld joint properties at -196 C and its susceptibility to hot cracking.

Devletian, J. H.↗
NASA NTRS1977

Phase relations in the Fe-Ni-Cr-S system and the sulfidation of an austenitic stainless steel

The stability fields of various sulfide phases that form on Fe-Cr, Fe-Ni, Ni-Cr and Fe-Cr-Ni alloys were developed as a function of temperature and the partial pressure of sulfur. The calculated stability fields in the ternary system were displayed on plots of log P sub S sub 2 versus the conjugate extensive variable which provides a better framework for following the sulfidation of Fe-Cr-Ni alloys at high temperatures. Experimental and estimated thermodynamic data were used in developing the sulfur potential diagrams. Current models and correlations were employed to estimate the unknown thermodynamic behavior of solid solutions of sulfides and to supplement the incomplete phase diagram data of geophysical literature. These constructed stability field diagrams were in excellent agreement with the sulfide phases and compositions determined during a sulfidation experiment.

Jacob, K. T.↗
NASA NTRS1975

Morphology and composition of chalcopyrite, chromite, Cu, Ni-Fe, pentlandite, and troilite in vugs of 76015 and 76215

Vugs from 76015 and 76215 are lined with euhedral crystals of plagioclase, pyroxene, ilmenite, Ni-Fe, and troilite. Smaller crystals of chromite, pentlandite, and chalcopyrite occur on the surface of the troilite in 76015. Wire Cu and dendritic-metallic Cu occurs with metallic Ni-Fe and troilite in some vugs of 76215. Troilite in both samples may have crystallized from an immiscible sulfide liquid. With falling temperature, chalcopyrite, and pentlandite may have exsolved from the troilite in 76015. By contrast, metallic Cu may have formed in 76215 by thermal breakdown of a bornite, troilite, and Ni-Fe assemblage which originally crystallized from a low-Ni immiscible sulfide liquid.

Carter, J. L.↗
NASA NTRS1980

Performance of two-layer thermal barrier systems on directionally solidified Ni-Al-Mo and comparative effects of alloy thermal expansion on system life

A promising two-layer thermal barrier coating system (TBS), Ni-16.4Cr-5.1A1-0.15Y/ZrO2-6.1Y2O3 (all in weight percent), was identified for directionally solidified Ni-Al-Mo (gamma/gamma' alpha). In cyclic furnace tests at 1095 C this system on gamma/gamma' alpha was better than Ni-16. 4Cr-5.1Al-0.15Y/ZrO2-7.8Y2O3 by about 50 percent. In natural gas - oxygen torch rig tests at 1250 C the ZrO2-6.1Y2O3 coating was better than the ZrO2-7.8Y2O3 coating by 95 percent, on MAR-M509 substrates and by 60 percent on gamma/gamma' alpha substrates. Decreasing the coefficient of thermal expansion of the substrate material from 17-18x10 to the -6 power/C (MAR-M200 + Hf and MAR-M509) to 11x10 to the -6 power/C (gamma/gamma' alpha) also resulted in improved TBS life. For example, in natural gas - oxygen torch rig tests at 1250 C, the life of Ni-16.4Cr-5.1Al-0.15Y/ZrO26.1Y2O3 was about 30 percent better on gamma/gamma' alpha than on MAR-M509 substrates. Thus compositional changes in the bond and thermal barrier coatings were shown to have a greater effect on TBS life than does the coefficient of thermal expansion.

Stecura, S.↗
NASA NTRS1981

Improved adhesion of Ni films on X-ray damaged polytetrafluoroethylene

The considered investigation shows that the adhesion of evaporated Ni on polytetrafluoroethylene (PTFE) is enhanced by irradiating the PTFE surface prior to evaporation. Evidence obtained with the aid of X-ray photoelectron spectroscopy is presented concerning the association of the enhanced adhesion with an interfacial chemical reaction. Evaporated Ni clearly adheres better to the X-ray damaged PTFE surface than to the undamaged surface. There is evidence that the improved adhesion is not related to the Ni-C bond, but rather to the NiF2. A possible mechanism which may be consistent with the data is the formation of a F-Ni-C complex, where C is a member of the polymer chain.

Wheeler, D. R.↗
NASA NTRS1984

Unexplained Fe, Ni and S anomalies in CV chondrite components

Large negative anomalies in Fe, Co, Ni, S and Se are present in Allende Type B Ca-Al-rich inclusions (CAI's). Based on compilations of all the known published analyses, Allende chondrules, aggregates and other types of CAI's also display anomalies. These observations show that: (1) since Fe, Co, Ni, S and Se are more depleted than elements bracketing them in volatility (such as Pt and Au, and Su and Cd), the anomalies were not produced during the volatility dependent, high temperature CAI forming processes; (2) since Pt, Au, Ge and other siderophiles are not as depleted as Fe, Co and Ni, the anomalies are not due to a metal/silicate fractionation; (3) the association of Fe, Co, and Ni anomalies with S and Se anomalies suggests that the anomalies are due to the removal of FeNi sulfide; and (4) since these anomalies occur in all types of Allende inclusions, aggregates and chondrules, the Allende parental material must have undergone sulfide loss before the formation of these components.

Wark, D. A.↗
NASA NTRS1989

Determination of the Fe-Ni phase diagram below 400 C

Analytical EM techniques have been used to obtain a phase diagram for the Fe-Ni system below 400 C in the composition range from 0-52 wt pct Ni. The present diagram is consistent with all the phases observed in the Fe-Ni regions of meteorites. An asymmetric spinodal decomposition results in the expected two-phase isotropic microstructure. The present experimentally-determined miscibility gap below 400 C, located between 11.7 and 51.9 wt pct Ni at 200 C, is shown to be wider than the calculated miscibility gap.

Reuter, K. B.↗
NASA NTRS1994

Determination of thermal properties of commercial Ni-MH cells

The test objectives were to evaluate the electrical and thermal performance of commercial Ni-MH cells, evaluate the effectiveness of commercial charge control circuits, assess the abuse tolerance of these cells, and correlate performance and abuse tolerances to cell design via disassembly. Design objectives were to determine which cell designs are most suitable for scale-up and to guide the design of future shuttle and space station based battery chargers. Results, displayed in viewgraph format, include: reflex charging with ICS circuit resulted in premature charge termination; Ni-MH cells appear very tolerant to overcharge at low rates; Enstore's charger is more electrically and thermally efficient at high rates; and Ni-MH cycles much more efficiently than Ni-Cd with the delta-V/delta-t termination.

Darcy, Eric C.↗
NASA NTRS1994

Evidence for Ni-56 yields Co-56 yields Fe-56 decay in type Ia supernovae

In the prevailing picture of Type Ia supernovae (SN Ia), their explosive burning produces Ni-56, and the radioactive decay chain Ni-56 yields Co-56 yields Fe-56 powers the subsequent emission. We test a central feature of this theory by measuring the relative strengths of a (Co III) emission feature near 5900 A and a (Fe III) emission feature near 4700 A. We measure 38 spectra from 13 SN Ia ranging from 48 to 310 days after maximum light. When we compare the observations with a simple multilevel calculation, we find that the observed Fe/Co flux ratio evolves as expected when the Fe-56/Co-56 abundance ratio follows from Ni-56 yields Co-56 yields Fe-56 decay. From this agreement, we conclude that the cobalt and iron atoms we observe through SN Ia emission lines are produced by the radioactive decay of Ni-56, just as predicted by a wide range of models for SN Ia explosions.

Kuchner, Marc J.↗
NASA NTRS1998

Effects of Cycling Conditions of Active Material From Discharged Ni Positive Plates Studied by Inelastic Neutron Scattering Spectroscopy

The objectives of this presentation are: identify atomic-level signatures of electrochemical activity of the active material on the Ni positive plates of Ni-H2 batteries, relate finding to cycling conditions and histories, and develop INS spectroscopy as a non-destructive testing technique for the evaluation of Ni-positive plates of Ni-H2 batteries.

Eckert, Juergen↗
NASA NTRS2001

Effect of Handling, Storage and Cycling on Ni-H2 Cells: Second Plateau Phenomenon

Proper handling of Ni-H2 cells/batteries in storage, during I&T, and at launch site is very important to preserve the useful energy and to extend the mission life. Cell reversal test is not a prudent test to verify or quantify the nickel pre-charge in Ni-H2 cells/batteries. The second plateau is due to the formation of Ni(+3) that is electrochemically inactive. Gas analysis of the cell, and chemical analysis of the positive plate are confirmatory tests to determine the nature of pre-charge in Ni-H2 cells.

Vaidyanathan, Hari↗