Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Quantifying the poor purity and completeness of morphological samples selected by galaxy colour

The galaxy population is strongly bimodal in both colour and morphology, and the two measures correlate strongly, with most blue galaxies being late-types (spirals) and most early-types, typically ellipticals, being red. This observation has led to the use of colour as a convenient selection criterion to make samples that are then labelled by morphology. Such use of colour as a proxy for morphology results in necessarily impure and incomplete samples. In this paper, we make use of the morphological labels produced by Galaxy Zoo to measure how incomplete and impure such samples are, considering optical (ugriz), near-ultraviolet (NUV), and near-infrared (NIR; JHK) bands. The best single colour optical selection is found using a threshold of g - r = 0.742, but this still results in a sample where only 56 per cent of red galaxies are smooth and 56 per cent of smooth galaxies are red. Use of the NUV gives some improvement over purely optical bands, particularly for late-types, but still results in low purity/completeness for early-types. No significant improvement is found by adding NIR bands. With any two bands, including NUV, a sample of early-types with greater than two-thirds purity cannot be constructed. In conclusion, advances in quantitative galaxy morphologies have made colour–morphology proxy selections largely unnecessary going forward; where such assumptions are still required, we recommend studies carefully consider the implications of sample incompleteness/impurity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Topological Frustration as a New Parameter to Tune Morphology Revealed through Exploring the Continuum between A-B-C 3-Arm Star and Linear Triblock Polymers

Block polymers assemble into a variety of phase-separated morphologies based on volume fraction (φ) and interactions (χ) of the respective blocks. The arrangement of three different polymer blocks could either be a 3-arm star, with each block having one terminus attached to a common junction point or a linear A-B-C architecture. A versatile strategy is reported to synthesize a series of well-defined graft polymers that lie along the unexplored continuum between a 3-arm star and an A-B-C linear triblock polymer architecture. Using the technique of single-molecule insertion, precise control over the position of graft arm C along the B chain was achieved. A series of discrete graft polymers (PMMA-b-PS-g-PEO) with fixed φ and prescribed ω values that lie on the continuum between a 3-arm star (ω = 0) and linear triblock polymer (ω = 1) were synthesized. Morphological studies using small-angle X-ray scattering and conventional and energy-filtered transmission electron microscopy reveal the transition between lamellae, perforated lamellae, and cylindrical morphologies with systematic variation in the ω values, a trend attributed to the topological frustration and the associated χ values between the three blocks. Molecular dynamic simulations of coarse-grained models were found to predict phase diagrams that are consistent with the experimentally observed morphologies. Furthermore, our results suggest that changes in ω lead to topological frustration which is an important additional new design parameter that can be used to tune the morphology of multiblock polymers in addition to φ and χ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Utilization of the Critic Subnetwork of a Generative Adversarial Network as Detector of Morphological Material Change in Image Data

The resolution of computed tomography (CT) has become high enough to monitor morphological changes due to aging in materials in long-term applications. For this work, we explored the utility of the critic of a generative adversarial network (GAN) to automatically detect such changes. The GAN was trained with images of pristine Pharmatose, which is used as a surrogate energetic material. It is important to note that images of the material with altered morphology were only used during the test phase. The GAN-generated images reproduced the microstructure of Pharmatose well, although some unrealistic particle fusion was seen. Calculated morphological metrics (volume fraction, interfacial line length, and local thickness) for the synthetic images also showed good agreement with the training data, albeit with signs of mode collapse in the interfacial line length. While the critic exposed changes in particle size, it showed limited ability to distinguish images by particle shape. The detection of shape differences was also a more challenging task for the selected morphological metrics that related to energetic material performance. We further tested the critic with images of aged Pharmatose. Subtle changes due to aging are difficult for the human analyst to detect; but both critic and morphological metrics analysis showed image differentiation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Three-dimensional paganica fault morphology obtained from hypocenter clustering (L'Aquila 2009 seismic sequence, Central Italy)

In seismic modelling, fault planes are normally assumed to be flat due to the lack of data which can constrain fault morphology. However, incorporating 3D fault morphology is important for modelling several phenomena, for example calculating mainshock induced stress changes. Here we utilize a data-analytical method to unveil the 3D rupture morphology of faults using unsupervised clustering techniques applied to earthquake hypocenters in seismic sequences. We apply this method to the 2009 L'Aquila seismic sequence which involved a M W 6.1 mainshock on April 6th. We use a dataset of about 50,000 relocated events, mostly microearthquakes, reaching magnitude of completeness equal to 0.7. Clustering distinguishes the earthquakes as occurring in three main clusters along with other minor fault segments. We then represent the morphology of the main Paganica fault system (responsible for the largest mainshock) using splines. This method shows promise as a step toward robustly and quickly obtaining 3D rupture morphologies where earthquake sequences have been monitored. The 3D model is presented interactively online, and the processing is presented in an interactive Jupyter Notebook (https://bit.ly/2MnCFdj).

58 GEOSCIENCES↗
DOE OSTI2020

Tuning the Morphology and Electronic Properties of Single-Crystal LiNi 0.5 Mn 1.5 O 4-δ : Exploring the Influence of LiCl–KCl Molten Salt Flux Composition and Synthesis Temperature

Single-crystal materials have played a unique role in the development of high-performance cathode materials for Li batteries due to their favorable chemomechanical stability. The molten salt synthesis method has become one of the most prominent techniques used to synthesize single-crystal layered and spinel materials. In this work, the molten salt synthesis method is used as a technique to tune both the morphology and Mn 3+ content of high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathodes. The resulting materials are thoroughly characterized by a suite of analytical techniques, including synchrotron X-ray core-level spectroscopy, which are sensitive to the material properties on multiple length scales. Furthermore, the multidimensional characterization allows us to build a materials library according to the molten salt phase diagram as well as to establish the relationship among synthesis, material properties, and battery performance. The results of this work show that the Mn 3+ content is primarily dependent on the synthesis temperature and increases as the temperature is increased. Additionally, the particle morphology is mostly dependent on the composition of the molten salt flux, which can be tailored to obtain well-defined octahedrons enclosed by (111) facets, plates with predominant ($11\tilde{2}$) facets, irregularly shaped particles, or mixtures of these. The electrochemical measurements indicate that the Mn 3+ content has a larger contribution to the battery performance of LNMO than do morphological characteristics and that a significant amount of Mn 3+ could become detrimental to the battery performance. However, with similar Mn 3+ contents, morphology still plays a role in influencing the battery cycle life and rate performance. The insights of molten salt synthesis parameters on the formation of LNMO, with deconvolution of the roles of Mn 3+ and morphology, are crucial to continuing studies in the rational design of LNMO cathode materials for high-energy Li batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Diel Cycling Temperature, Relative Humidity, and Synthetic Route on the Surface Morphology and Hydrolysis of α -U 3 O 8

The speciation and morphological changes of α-U 3 O 8 following aging under diel cycling temperature and relative humidity (RH) have been examined. This work advances the knowledge of U-oxide hydration as a result of synthetic route and environmental conditions, ultimately giving novel insight into nuclear material provenance. α-U 3 O 8 was synthesized via the washed uranyl peroxide (UO 4 ) and ammonium uranyl carbonate (AUC) synthetic routes to produce unaged starting materials with different morphologies. α-U 3 O 8 from UO 4 is comprised of subrounded particles, while α-U 3 O 8 from AUC contains blocky, porous particles approximately an order of magnitude larger than particles from UO 4 . For aging, a humidity chamber was programmed for continuous daily cycles of 12 “high” hours of 45 °C and 90% RH, and 12 “low” hours of 25 °C and 20% RH. Samples were analyzed at varying intervals of 14, 24, 36, 43, and 54 days. At each aging interval, crystallographic changes were measured via powder X-ray diffraction coupled with whole pattern fitting for quantitative analysis. Morphologic effects were studied via scanning electron microscopy and 12-way classification via machine learning. While all samples were found to have distinguishing morphologic characteristics (93.2% classification accuracy), α-U 3 O 8 from UO 4 had more apparent change with increasing aging time. Nonetheless, α-U 3 O 8 from AUC was found to hydrate more quickly than α-U 3 O 8 from UO 4 , which can likely be attributed to its larger surface area and porous starting material morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Indium as a surfactant: Effects on growth morphology and background impurity in GaN films grown by ammonia-assisted molecular beam epitaxy

We report on the improvement of the surface morphology of c-plane GaN films grown at high growth rates (~1 µm/h) using ammonia molecular beam epitaxy through a series of growth optimizations as well as the introduction of indium as a surfactant. The indium surfactant was expected to help with the adatom mobility and, thus, provide smoother growth surfaces. Through a combination of varying V/III ratios, In flux, and growth temperatures, an optimal condition for surface morphology, characterized by atomic force microscopy, was achieved. At higher Ga fluxes for fast growth rates (~1 µm/h and beam equivalent pressures of ~5 × 10 –7 Torr), higher ammonia flows were necessary to preserve the surface morphology. In addition, indium was an effective surfactant—reducing the roughness and improving the overall surface morphology. However, excessive indium causes the surface morphology to degrade, potentially due to the enhancement of the Ga desorption from the surface as a result of the reaction of indium with ammonia for high indium fluxes. The indium surfactant also resulted in a reduction of background Si impurity concentrations in the film. These effects allow for the growth of thick drift layers with low background dopant concentrations for vertical GaN power devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The influence of intake flow and coolant temperature on gasoline spray morphology during early-injection DISI engine operation

Multi-hole gasoline injectors operating at conditions spanning throttled early-intake stroke operation produce spray plumes that either remained separated or merge and collapse due to flash boiling. Flash boiling occurs due to the sudden expansion of gas bubbles in the liquid fuel at high fuel temperature and low ambient pressure. This study records high-speed images of spray-morphology changes due to in-cylinder flow, thereby revealing operating conditions that do and do not affect the self-induced morphology observed in quiescent vessels. Specifically, in a central-injection, four-valve, high-tumble engine, where the thermodynamic state and in-cylinder cross flow are dynamic. Motivated by cold start and hot restart operation, the fuel pressure, coolant temperature, in-cylinder air pressure, and engine rpm were systematically varied over relevant operating conditions, which bracketed the range from non- to flash-boiling sprays. The results reveal the operating conditions at which the in-cylinder cross flow disrupts the spray morphology as well as the extent of the disruption. At 650 rpm, the spray morphology was similar to that observed in quiescent vessels at nominally equivalent fuel temperature and in-cylinder pressure, indicating that the spray’s self-induced entrainment flow dominated the in-cylinder flow. However, for fuel temperature and ambient pressure near the transition between non- and flash-boiling, the intake cross flow at higher engine speed (1950 rpm) significantly disrupted the spray morphology. The high cross-flow velocity appears to induce plume merging and collapse, whereas none was evident at low rpm (650 rpm). This study led to the postulate that the spray merging and collapse are governed by the rate of atomization near the nozzle exit, presumed to be controlled by either or both aerodynamic atomization and flash-boiling intensity. It would then follow that spray modeling in CFD requires atomization models that blend the effects of both physical processes.

42 ENGINEERING↗
DOE OSTI2021

Synthesis and Morphological Characterization of Electroless-Deposited Ni-P Coatings on Diamond Abrasives

Deposition of a coating on rough surfaces faces unique challenges due to the complexity of substrate morphology. In the present research, electroless deposition of a Ni-P coating was successfully deposited on diamond particles. Microtomography was conducted to study the deposition mechanisms. It revealed that the coating coverage rate on diamond particles was affected by the synergistic action of the deposition time, substrate morphology, and hypophosphite concentration. The best coverage was achieved in a solution with 0.2 mol/L hypophosphite. Two major morphological features of the coating: nodular and smooth, were influenced by the deposition parameters, coating integrity, and substrate morphology. The failure was seen in fractured and peeled off coatings. It was due to residual stress produced by the coalescing of crystallites during the deposition. This failure mechanism explains the tendency of coating fracture at three morphological features of the substrate. This work is beneficial to semiconductor manufacturing where effective cutting in chip fabrication is essential.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Morphological landscapes from high content imaging reveal cytokine priming strategies that enhance mesenchymal stromal cell immunosuppression

Abstract Successful clinical translation of mesenchymal stromal cell (MSC) products has not been achieved in the United States and may be in large part due to MSC functional heterogeneity. Efforts have been made to identify “priming” conditions that produce MSCs with consistent immunomodulatory function; however, challenges remain with predicting and understanding how priming impacts MSC behavior. The purpose of this study was to develop a high throughput, image‐based approach to assess MSC morphology in response to combinatorial priming treatments and establish morphological profiling as an effective approach to screen the effect of manufacturing changes (i.e., priming) on MSC immunomodulation. We characterized the morphological response of multiple MSC lines/passages to an array of Interferon‐gamma (IFN‐γ) and tumor necrosis factor‐⍺ (TNF‐⍺) priming conditions, as well as the effects of priming on MSC modulation of activated T cells and MSC secretome. Although considerable functional heterogeneity, in terms of T‐cell suppression, was observed between different MSC lines and at different passages, this heterogeneity was significantly reduced with combined IFN‐γ/TNF‐⍺ priming. The magnitude of this change correlated strongly with multiple morphological features and was also reflected by MSC secretion of immunomodulatory factors, for example, PGE2, ICAM‐1, and CXCL16. Overall, this study further demonstrates the ability of priming to enhance MSC function, as well as the ability of morphology to better understand MSC heterogeneity and predict changes in function due to manufacturing.

Andrews, Seth H.↗
DOE OSTI2020

Genetic architecture of leaf morphological and physiological traits in a Populus deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ pedigree revealed by quantitative trait locus analysis

Understanding the genetic architecture of leaf morphological and physiological traits will help plant breeders develop high biomass poplar genotypes. Quantitative trait locus (QTL) studies combining next-generation sequencing techniques can advance our understanding of the genetic basis of complex traits. In this study, we measured 13 leaf morphological and physiological traits and identified quantitative trait loci (QTLs) in a Populus deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ F1 population (500 progenies) using a high-density genetic map constructed by whole genome re-sequencing. This linkage map consisted of 5796 single nucleotide polymorphism (SNP) markers assigned to 19 linkage groups (LGs), spanning 2683.80 centimorgans (cM) of genetic length, with an average marker density of 0.46 cM. We identified 109 QTLs on 18 LGs for leaf morphological traits and 55 QTLs on 14 LGs for leaf physiological traits. One-hundred eight putative candidate genes were identified within the candidate genomic region. Co-expression network and gene ontology enrichment analyses suggested that these candidate genes were involved in the photosynthetic process. The differential expression patterns of the CYCLIN (Potri.015G112200) and RED CHLOROPHYLL REDUCTASE (Potri.007G043600) genes between two parents indicated their potential roles in leaf morphological and physiological traits. These findings decipher the genetic architecture of leaf morphological and physiological traits in the P. deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ pedigree and provide candidate genes for future poplar genetic improvement.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Control over Banded Morphologies and Circular Dichroism in Chiral Halide Perovskites

Chiral halide perovskites (c-HPs) merge the chirality of organic cations with the semiconducting properties of metal halide frameworks, creating a family of chiral semiconductors with tunable chiroptoelectronic behavior. Here, we describe the impact of periodic banded morphologies of textured c-HP ( R/S -NEA) 2 PbBr 4 films (NEA = 1- (1-naphthyl)ethylammonium) on their chiroptical behavior. Due to the interplay between the crystalline and glassy phases, the c-HP film growth is driven by rhythmic precipitation, producing a distinctive controllable radial banded pattern with the ( R/S -NEA) 2 PbBr 4 inorganic planes oriented parallel to the substrate. The banded morphology can be controlled, as evidenced by the growth temperature dictating the ridge-to-ridge spacing as well as the density of banded regions. The resulting circular dichroism (CD) spectral shape, intensity, and polarity vary in a seemingly random manner across processing conditions. However, these spectral features can be explained by considering key features of the banded morphology, such as refraction of the incident light due to surface morphology, birefringence, and stacked, rotated crystallites. These effects cannot be canceled by averaging front and back CD spectra of c-HP films, and our model incorporating these effects reproduces all observed CD spectra remarkably well. The control over the c-HP morphology and prediction capabilities of our CD modeling leads to further understanding of this class of semiconductors and the possibility of exploiting structural features for light polarization control akin to enhanced metamaterials.

14 SOLAR ENERGY↗
DOE OSTI2023

The Role of Mesoscale Cloud Morphology in the Shortwave Cloud Feedback

A supervised neural network algorithm is used to categorize near-global satellite retrievals into three mesoscale cellular convective (MCC) cloud morphology patterns. At constant cloud amount, morphology patterns differ in brightness associated with the amount of optically thin cloud features. Environmentally driven transitions from closed MCC to other morphology patterns, typically accompanied by more optically thin cloud features, are used as a framework to quantify the morphology contribution to the optical depth component of the shortwave cloud feedback. A marine heat wave is used as an out-of-sample test of closed MCC occurrence predictions. Morphology shifts in optical depth between 65°S and 65°N under projected environmental changes (i.e., from an abrupt quadrupling of CO 2 ) assuming constant cloud cover contributes between 0.04 and 0.07 W m -2 K -1 (aggregate of 0.06) to the global mean cloud feedback.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Contributions From Cloud Morphological Changes to the Interannual Shortwave Cloud Feedback Based on MODIS and ISCCP Satellite Observations

The surface temperature-mediated change in cloud properties, referred to as the cloud feedback, continues to dominate the uncertainty in climate projections. A larger number of contemporary global climate models (GCMs) project a higher degree of warming than the previous generation of GCMs. This greater projected warming has been attributed to a less negative cloud feedback in the Southern Ocean. Here, we apply a novel “double decomposition method” that employs the “cloud radiative kernel” and “cloud regime” concepts, to two data sets of satellite observations to decompose the interannual cloud feedback into contributions arising from changes within and shifts between cloud morphologies. Our results show that contributions from the latter to the cloud feedback are large for certain regimes. We then focus on interpreting how both changes within and between cloud morphologies impact the shortwave cloud optical depth feedback over the Southern Ocean in light of additional observations. Results from the former cloud morphological changes reveal the importance of the wind response to warming increases low- and mid-level cloud optical thickness in the same region. Results from the latter cloud morphological changes reveal that a general shift from thick storm-track clouds to thinner oceanic low-level clouds contributes to a positive feedback over the Southern Ocean that is offset by shifts from thinner broken clouds to thicker mid- and low-level clouds. Our novel analysis can be applied to evaluate GCMs and potentially diagnose shortcomings pertaining to their physical parameterizations of particular cloud morphologies.

58 GEOSCIENCES↗
DOE OSTI2020

Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells

Abstract Morphology control in laboratory and industry setting remains as a major challenge for organic solar cells (OSCs) due to the difference in film-drying kinetics between spin coating and the printing process. A two-step sequential deposition method is developed to control the active layer morphology. A conjugated polymer that self-assembles into a well-defined fibril structure is used as the first layer, and then a non-fullerene acceptor is introduced into the fibril mesh as the second layer to form an optimal morphology. A benefit of the combined fibril network morphology and non-fullerene acceptor properties was that a high efficiency of 16.5% (certified as 16.1%) was achieved. The preformed fibril network layer and the sequentially deposited non-fullerene acceptor form a robust morphology that is insensitive to the polymer batches, solving a notorious issue in OSCs. Such progress demonstrates that the utilization of polymer fibril networks in a sequential deposition process is a promising approach towards the fabrication of high-efficiency OSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-throughput platform for yeast morphological profiling predicts the targets of bioactive compounds

Abstract Morphological profiling is an omics-based approach for predicting intracellular targets of chemical compounds in which the dose-dependent morphological changes induced by the compound are systematically compared to the morphological changes in gene-deleted cells. In this study, we developed a reliable high-throughput (HT) platform for yeast morphological profiling using drug-hypersensitive strains to minimize compound use, HT microscopy to speed up data generation and analysis, and a generalized linear model to predict targets with high reliability. We first conducted a proof-of-concept study using six compounds with known targets: bortezomib, hydroxyurea, methyl methanesulfonate, benomyl, tunicamycin, and echinocandin B. Then we applied our platform to predict the mechanism of action of a novel diferulate-derived compound, poacidiene. Morphological profiling of poacidiene implied that it affects the DNA damage response, which genetic analysis confirmed. Furthermore, we found that poacidiene inhibits the growth of phytopathogenic fungi, implying applications as an effective antifungal agent. Thus, our platform is a new whole-cell target prediction tool for drug discovery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Sensitivity of mesoscale modeling to urban morphological feature inputs and implications for characterizing urban sustainability

We examine the differences in meteorological output from the Weather Research and Forecasting (WRF) model run at 270 m horizontal resolution using 10 m, 100 m and 1 km resolution 3D neighborhood morphological inputs and with no morphological inputs. We find that the spatial variability in temperature, humidity, and other meteorological variables across the city can vary with the resolution and the coverage of the 3D urban morphological input, and that larger differences occur between simulations run without 3D morphological input and those run with some type of 3D morphology. We also find that the inclusion of input-building-defined roughness length calculations would improve simulation results further. We show that these inputs produce different patterns of heat wave spatial heterogeneity across the city of Washington, DC. These findings suggest that understanding neighborhood level urban sustainability under extreme heat waves, especially for vulnerable neighborhoods, requires attention to the representation of surface terrain in numerical weather models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Understanding and controlling lithium morphology in solid polymer and gel polymer systems: mechanisms, strategies, and gaps

Lithium metal anode promises the highest theoretical energy density and may enable high energy designs such as lithium–sulfur and lithium–air batteries. However, stable lithium plating and stripping remains a challenge in all electrolyte systems including liquids, polymers, and ceramic electrolytes. In this perspective, we examine literature studies of lithium morphologies in solid polymer and gel polymer systems and compare that with well-studied liquid electrolytes. In solid polymer electrolytes, current density and mechanical properties are both governing parameters for lithium morphology, differing from conventional liquid electrolytes. Stable lithium electrodeposition may be accomplished by a polymer electrolyte with good stiffness operating at significantly lower current densities than its limiting current density, which is defined by the Sand equation. In gel polymer electrolytes, the reported lithium morphology is more similar to that in liquid electrolytes, suggesting similar nucleation and growth mechanisms. Based on experimental evidence and theoretical guidance, current strategies to control lithium morphology in solid polymer and gel polymer electrolytes are summarized. The limitations of these strategies are discussed. In particular, we note the knowledge gap in understanding the solid electrolyte interphase in solid polymer systems and the critical role it can play in regulating lithium morphologies.

36 MATERIALS SCIENCE↗