Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microcomputers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Infrared astronomical imaging using a microcomputer data system

A small, portable data-acquisition and display system with a unique coprocessor was designed and built to collect data from infrared array detectors for astronomical and laboratory use. The system consists of a microcomputer board, two 12-bit analog-to-digital data-acquisition boards, a color-graphics driver board, and two coprocessor boards. The coprocessors are arithmetic logic units designed to achieve the high computation rates necessary for real-time infrared background cancellation. The system can collect data from infrared detectors of 1 to 256 pixel elements with a computation rate of 768 kHz. The software for the system was designed to collect data in the system's background, while performing other tasks in the system's foreground. The data for the detector arrays is stored in block fashion to facilitate variable image size.

Stafford, P. S.↗
NASA NTRS1986

"Speaking" Microcomputer

Microcomputer system allows blind person to use portable computer and communicate with remote mainframe computer. System prepares data for transmission to mainframe, translates data transmitted from mainframe for its own use, and converts data ordinarily displayed on its video screen into synthesized speech.

Mandy, C.↗
NASA NTRS1984

Composite laminate optimization program suitable for microcomputers

The design of a composite panel requires some way of finding the minimum thickness laminate which will withstand the load requirements without failure. The mathematical complexity of this problem dictates the use of nonlinear optimization techniques. Specialized laminate optimization programs were developed which are compact and efficient enough to run on microcomputers. Only stresses at a point and inplane loads and deflections are considered. The programs are simple to use and require no knowledge of optimization. Techniques are developed which find minimum thickness laminates with either ply ratios or ply angles as design variables. A method is presented for finding the optimum orientation for the axis of symmetry of an orthotropic laminate. The orthotropic laminate program uses an approximate failure theory, which speed up computations dramatically.

Flanagan, G. V.↗
NASA NTRS1985

Exploiting parallel computing with limited program changes using a network of microcomputers

Network computing and multiprocessor computers are two discernible trends in parallel processing. The computational behavior of an iterative distributed process in which some subtasks are completed later than others because of an imbalance in computational requirements is of significant interest. The effects of asynchronus processing was studied. A small existing program was converted to perform finite element analysis by distributing substructure analysis over a network of four Apple IIe microcomputers connected to a shared disk, simulating a parallel computer. The substructure analysis uses an iterative, fully stressed, structural resizing procedure. A framework of beams divided into three substructures is used as the finite element model. The effects of asynchronous processing on the convergence of the design variables are determined by not resizing particular substructures on various iterations.

Rogers, J. L., Jr.↗
NASA NTRS1985

Fracture mechanics formulas on microcomputers

An interactive fracture mechanics program was developed in BASIC minima on a CBM 4032 microcomputer. It furnishes stress intensity factors and the critical size of a flaw.

Afzali, M.↗
NASA NTRS1984

Techniques for digital enhancement of Landsat MSS data using an Apple II+ microcomputer

The information provided by remotely sensed data collected from orbiting platforms has been useful in many research fields. Particularly convenient for evaluation are generally digital data stored on computer compatible tapes (CCT's). The major advantages of CCT's are the quality of the data and the accessibility to computer manipulation. Minicomputer systems are widely used for the required computer processing operations. However, microprocessor-related technological advances make it now possible to process CCT data with computing systems which can be obtained at a much lower price than minicomputer systems. A detailed description is provided of the design considerations of a microcomputer-based Digital Image Analysis System (DIAS). Particular attention is given to the algorithms which are incorporated for eighter edge enhancement or smoothing Landsat multispectral scanner data.

Harrington, J. A., Jr.↗
NASA NTRS1985

Microcomputer-based digital image processing - A tutorial package for exploration geologists

An Apple II microcomputer-based software package for analysis of digital data developed at the University of Oklahoma, the Digital Image Analysis System (DIAS), provides a relatively low-cost, portable alternative to large, dedicated minicomputers for digital image processing education. Digital processing techniques for analysis of Landsat MSS data and a series of tutorial exercises for exploration geologists are described and evaluated. DIAS allows in-house training that does not interfere with computer-based prospect analysis objectives.

Harrington, J. A., Jr.↗
NASA NTRS1984

Microcomputer-based, statewide, digital land-surface information

The Center for Remote Sensing at Michigan State University is developing a statewide data base of land-surface information on an ERDAS 400 microcomputer system. The raster file structure uses 1 square-kilometer grid cells and contains 633 columns and 733 rows. The initial elements of this data base include (1) augmented Level I land cover; (2) average available soil water capacity; (3) topographic information; and (4) multiple-vector, windward distance to the Great Lakes. Other elements will be added to the data base in the future in order to serve the multidisciplinary needs of the research community at Michigan State University.

Lusch, D. P.↗
NASA NTRS1986

Microcomputer-based programmable optical signal processor

A microcomputer-based real-time programmable optical signal processing system utilizing a magneto-optic spatial light modulator (MOSLM) and a liquid crystal light valve (LCLV) is described. This system can perform a myriad of complicated optical operations, such as image correlation, image subtraction, and matrix multiplication. Its important asserts are its programmability and the capability of real-time addressing. These are important for telerobotic vision in space automation applications. Design specifications and suggestions for practical implementation of the system are discussed. Some preliminary experimental demonstrations are conducted to demonstrate applications of the proposed system to image correlation for optical pattern recognition, image subtraction for lC chip inspection, and matrix multiplication for optical computing.

Yu, F. T. S.↗
NASA NTRS1987

Aerodynamic-Analysis Programs For Microcomputers

Lifts, drags, and moments calculated for subsonic and supersonic speeds. Series of computer programs used for aerodynamic analysis at NASA Langley Research Center modified for use on microcomputer. Programs include aerodynamic-analysis program for low-speed wing and flap systems (SUBAERF), supersonic-wave-drag-analysis program (WDRAG2), and supersonic-lifting-surface program (Lift Analysis). Set up to run from common geometry format with appropriate additional input data for each particular program. Package written in FORTRAN 77.

Knapp, Marie L.↗
NASA NTRS1986

Pulse Code Modulation (PCM) data storage and analysis using a microcomputer

The current widespread use of microcomputers has led to the creation of some very low-cost instrumentation. A Pulse Code Modulation (PCM) storage device/data analyzer -- a peripheral plug-in board especially constructed to enable a personal computer to store and analyze data from a PCM source -- was designed and built for use on the NASA Sounding Rocket Program for PMC encoder configuration and testing. This board and custom-written software turns a computer into a snapshot PCM decommutator which will accept and store many hundreds or thousands of PCM telemetry data frames, then sift through them repeatedly. These data can be converted to any number base and displayed, examined for any bit dropouts or changes (in particular, words or frames), graphically plotted, or statistically analyzed.

Massey, D. E.↗
NASA NTRS1987

Summary of paper: Area navigation implementation for a microcomputer-based Loran-C receiver

The development of an area navigation program and the implementation of this software on a microcomputer-based Loran-C receiver to provide high-quality, practical area navigation information for general aviation are described. This software provides range and bearing angle to a selected waypoint, cross-track error, course deviation indication (CDI), ground speed, and estimated time of arrival at the waypoint. The range/bearing calculation, using an elliptical Earth model, provides very good accuracy; the error does not exceed more than -.012 nm (range) or 0.09 degree (bearing) for a maximum range to 530 nm. The alpha-beta filtering is applied in order to reduce the random noise on Loran-C raw data and in the ground speed calculation. Due to alpha-beta filtering, the ground speed calculation has good stability for constant or low-accelerative flight. The execution time of this software is approximately 0.2 second. Flight testing was done with a prototype Loran-C front-end receiver, with the Loran-C area navigation software demonstrating the ability to provide navigation for the pilot to any point in the Loran-C coverage area in true area navigation fashion without line-of-sight and range restriction typical of VOR area navigation.

Oguri, Fujiko↗
NASA NTRS1987

Interactive plotting of NASTRAN data on microcomputers

A microcomputer based program has been developed to aid in the development of NASTRAN models. The program reads in the complete NASTRAN data deck, produces a diagnostic print file, and then allows the user to view the model in an interactive mode. The program runs on a wide variety of hardware by making use of the Virtual Device Interface.

Norton, Robert L.↗
NASA NTRS1986

Microcomputer control of infrared detector arrays

A microcomputer-based data-acquisition system has been developed for astronomical observing with two-dimensional infrared detector arrays. The hardware used is a 16-bit, 8086/8087 based system operating at 8 MHz. Data rates of up to 454,000 pixels per second are supported. The hardware is operated using interactive software which supports several modes of data acquisition.

Rossano, G. S.↗
NASA NTRS1987

Life sciences flight experiments microcomputer

A promising microcomputer configuration for the Spacelab Life Sciences Lab. Equipment inventory consists of multiple processors. One processor's use is reserved, with additional processors dedicated to real time input and output operations. A simple form of such a configuration, with a processor board for analog to digital conversion and another processor board for digital to analog conversion, was studied. The system used digital parallel data lines between the boards, operating independently of the system bus. Good performance of individual components was demonstrated: the analog to digital converter was at over 10,000 samples per second. The combination of the data transfer between boards with the input or output functions on each board slowed performance, with a maximum throughput of 2800 to 2900 analog samples per second. Any of several techniques, such as use of the system bus for data transfer or the addition of direct memory access hardware to the processor boards, should give significantly improved performance.

Bartram, Peter N.↗
NASA NTRS1988

An advanced microcomputer design for processing of semiconductor materials

In the Get Away Special 330 payload two germanium samples doped with gallium will be processed. The aim of the experiments is to create a planar solid/liquid interface, and to study the breakdown of this interface as the crystal growth rate increases. For the experiments a gradient furnace was designed which is heated by resistive heaters. Cooling is provided by circulating gas from the atmosphere in the cannister through cooling channels in the furnace. The temperature along the sample are measured by platinum/rhodium thermocouples. The furnace is controlled by a microcomputer system, based upon the processor 80C88. A data acquisition system is integrated into the system. In order to synchronize the different actions in time, a multitask manager is used.

Bjoern, L.↗
NASA NTRS1988

A microcomputer based frequency-domain processor for laser Doppler anemometry

A prototype multi-channel laser Doppler anemometry (LDA) processor was assembled using a wideband transient recorder and a microcomputer with an array processor for fast Fourier transform (FFT) computations. The prototype instrument was used to acquire, process, and record signals from a three-component wind tunnel LDA system subject to various conditions of noise and flow turbulence. The recorded data was used to evaluate the effectiveness of burst acceptance criteria, processing algorithms, and selection of processing parameters such as record length. The recorded signals were also used to obtain comparative estimates of signal-to-noise ratio between time-domain and frequency-domain signal detection schemes. These comparisons show that the FFT processing scheme allows accurate processing of signals for which the signal-to-noise ratio is 10 to 15 dB less than is practical using counter processors.

Horne, W. Clifton↗