Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Selective sulfidation of metal compounds

There is urgent, unprecedented demand for critical by-product and co-product metallic elements for the infrastructure (magnets, batteries, catalysts and electronics) needed to power society with renewable electricity1,2,3. However, the extraction of d-block and f-block metals from mineral and recycled streams is thermodynamically difficult, typically requiring complete dissolution of the materials, followed by liquid–liquid separation using metal-ion complexing or chelating behaviour4,5. The similar electronic structure of these metals results in poor separation factors, necessitating immense energy, water and chemicals consumption6,7,8. Here a metal-processing approach based on selective anion exchange is proposed. Several simple process levers (gas partial pressure, gas flowrate and carbon addition) are demonstrated to selectively sulfidize a target metal from a mixed metal-oxide feed. The physical and chemical differences between the sulfide and oxide compounds (for example, density, magnetic susceptibility and surface chemistry) can then be exploited for vastly improved separation compared with liquid–liquid methods9. The process conditions of sulfidation are provided for 56 elements and demonstrated for 15 of them. An assessment of the environmental and economic impacts suggests a path towards 60–90% reductions in greenhouse gas emissions while offering substantial capital cost savings compared with liquid–liquid hydrometallurgy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparative analysis of plasmon modes in layered Lindhard metals and strange metals

The enigmatic strange metal remains one of the central unsolved problems of 21st century science. Understanding this phase of matter requires knowledge of the momentum- and energy-resolved dynamic charge susceptibility 𝜒⁡(𝑞,𝜔), especially at finite momentum. Inelastic electron scattering (EELS), performed in either transmission or reflection geometry, is a powerful probe of 𝜒⁡(𝑞,𝜔). For the prototypical strange metal Bi 2 ⁢Sr 2 ⁢CaCu 2 ⁢O 8+𝑥 , transmission- and reflection EELS, and infrared (IR) spectroscopy agree at 𝑞∼0, all revealing a highly damped plasmon near 1 eV. At larger 𝑞, however, EELS results show unresolved discrepancies. Since IR data are highly reproducible, it is advantageous to use IR data to calculate what the expected EELS response should be at modest 𝑞. Building on prior momentum-resolved reflection geometry M-EELS work [Chen et al., Phys. Rev. B 109, 045108 (2024)], we extend this approach to transmission EELS for finite stacks of metallic layers, comparing a “textbook” Lindhard metal to a strange metal. In the Lindhard case, the low-𝑞 response is dominated by long-lived, standing wave plasmon modes arising from interlayer Coulomb coupling, with in-plane dispersions that resemble the well-known Fetter modes of layered metals. This behavior depends only on the geometry and the long-range nature of the Coulomb interaction and is largely insensitive to layer details. At larger 𝑞, the response reflects the microscopic properties of individual layers. For the strange metal, calculations based on IR data predict a highly damped plasmon with weak dispersion and no distinct surface mode. While our results match IR and M-EELS at low 𝑞, they do not reproduce any published EELS spectra at large 𝑞, highlighting unresolved discrepancies that demand further experimental investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Metal-Complex Inks for Lower Cost and Improved Passivation for Silicon Photovoltaic Metallization

This contribution introduces the silicon PV community to screen-printable metal-complex inks that potentially will reduce Ag usage in Si PV metallization to one-quarter and costs to one-third that of traditional particle-based pastes while also improving passivation. Metal-complex inks are formulated using a Tollen's reaction to produce inks with a high percentage of diamminesilver (I) cations (22 wt %) in a solution of acetate and formate anions. When printed and dried labile ammonia ligands evaporate, leaving behind silver cations which, when reduced by formate anions and acetic acid, plate out silver and silver acetate. When annealed to just 300 degrees C a dense metallic silver film forms with excellent conductivity, and adhesion to silicon. When compared to traditional particle-based screen-printing pastes, the metal-complex inks are much denser, have higher conductivity, use less Ag, and are a fraction of the cost. Importantly, the inks anneal from 90 - 450 degrees C allowing for better passivation schemes than fired SiNx. This contribution highlights first experiments on the improved passivation of metallized poly-Si/SiO2 passivated contacts using metal-complex, Ag inks compared with particle-based, fired pastes.

metal-complex ink↗
DOE OSTI2022

Synergistic Electrocatalytic Syngas Production from Carbon Dioxide by Bi‐Metallic Atomically Dispersed Catalysts

Abstract The production of syngas by traditional processes such as steam methane reforming is energetically intensive and produces a large amount of CO 2 emissions. In contrast, the electrochemical CO 2 reduction reaction (CO 2 RR) enables the carbon neutral production of syngas at ambient conditions. Among non‐precious metal catalysts, metal‐nitrogen‐carbon electrocatalysts are inexpensive and highly selective towards syngas production. This study examined the selectivity of mono‐ and bi‐metallic (M−N−C, M=Fe, Mo or FeMo) electrocatalysts towards syngas production. The ratio of the CO : H 2 in the syngas was tuned by modifying the ratio of the metallic precursors in the bi‐metallic FeMo−N−C catalysts, tailoring the catalysts’ selectivity towards the CO 2 RR or the hydrogen evolution reaction (HER). The catalyst synthesis temperature(s) were considered as they influence the catalyst morphology and activity. Further, the dependence of the ratio of CO : H 2 in the syngas as a function of the potential was explored for the different bi‐metallic catalysts. This work showed that by tailoring both the ratio of Fe : Mo in the bi‐metallic catalyst and optimizing the reductive potential, a CO : H 2 ratio between 0.25 to 5 was achievable. This study demonstrated a novel approach in which the ratio of the product syngas composition could be tailored in a single reaction, without the need for further downstream processing to reach a desired composition.

Delafontaine, Laurent↗
DOE OSTI2022

HIDRA-MAT liquid metal droplet injector for liquid metal applications in HIDRA

A liquid metal droplet injector was explicitly designed for the Hybrid Illinois Device for Research and Applications Material Analysis Test-stand (HIDRA-MAT) at the University of Illinois Urbana-Champaign to prepare liquid metal plasma-facing components (PFCs) for plasma exposure. The design goals were to create a compact, reliable, and robust design that could apply liquid metal droplets in-vacuo to a variety of samples. The injector was designed for liquid metal use, and results discussed pertain to lithium. The injector can produce lithium droplets of consistent size by utilizing programmable piston movement. Here, droplet formation data is presented for four different piston step sizes (0.125 mm, 0.25 mm, 0.5 mm, and 1 mm) at three different nozzle temperatures (185 °C, 230 °C, and 270 °C). Droplets are formed on the injector nozzle tip and a linear shift mechanism vertically translates the droplet to the substrate for application. This design prevents the droplet from inadvertently detaching off the nozzle and falling to the sample. Application of the liquid metal droplet ensures placement consistency on the substrate and helps avoid damage to components in HIDRA-MAT that should not interact with liquid metals. A description of the liquid lithium droplet creation and application results is given and provides additional insight into the cooling and oxidation of lithium droplets under vacuum conditions. A second nozzle was fabricated and demonstrated repeatability in droplet diameter creation having a variance of ±0.14 mm for droplets created from the same number of piston steps. The end-use for the injector on HIDRA-MAT is to apply liquid metals to PFCs and expose them to HIDRA's plasma with subsequent intershot in-vacuo surface analysis in HIDRA-MAT for plasma-material interaction studies.

42 ENGINEERING↗
DOE OSTI2024

Hybrid Quantum Mechanical, Molecular Mechanical, and Machine Learning Potential for Computing Aqueous-Phase Adsorption Free Energies on Metal Surfaces

Performing reliable computer simulations of elementary processes occurring at metal–water interfaces is pivotal for novel catalyst design in sustainable energy applications. Computational catalyst design hinges on the ability to reliably and efficiently compute the potential energy surface (PES) of the system. Here, due to the large system sizes needed for studying processes at liquid water–metal interfaces, these systems can currently not be described using density functional theory (DFT). In this work, we used a hybrid quantum mechanical, molecular mechanical, and machine learning potential for studying the adsorption behavior of phenol, atomic hydrogen, 2-butanol, and 2-butanone on the (0001) facet of Ru under reducing conditions when Ru is not oxidized. Specifically, we describe the adsorbate and the surrounding metal atoms at the DFT level of theory. Here, we also considered the electrostatic field effect of the water molecules on adsorbate–metal interactions. Next, for the water–water and water–adsorbate interactions, we used established classical force fields. Finally, for the water–Ru surface interaction, for which no reliable force fields have been published, we used Behler–Parrinello high-dimensional neural network potentials (HDNNPs). Employing this setup, we used our explicit solvation for metal surface (eSMS) approach to compute the aqueous-phase effect on the low-coverage adsorption of selected molecules and atoms on the (0001) facet of Ru. In agreement with previous experimental and computational studies of oxygenated molecules over transition metal facets, we found that liquid water destabilizes the tested adsorbates on Ru(0001). Interestingly, our findings indicate that adsorbates on Ru are less affected by the presence of an aqueous phase than on other transition metals (e.g., Pt), highlighting the necessity of experimental investigations of Ru-based catalytic systems in liquid water.

Adsorption↗
DOE OSTI2023

Computational analysis of metal–metal bonded dimetal tetrabenzoate redox potentials in the context of ammonia oxidation electrocatalysis

Metal–metal bonded complexes are promising candidates for catalyzing redox transformations. Of particular interest is the oxidation of ammonia to dinitrogen, an important half reaction for the potential utilization of ammonia as a fuel or hydrogen carrier. This work computationally explores 30 different metal–metal bonded dimers (5 different metal centers and 6 different benzoate ligand derivatives) to explore the tunability of the redox potential when ammonia is bound to the complexes as an axial ligand, modeling the first step in ammonia oxidation electrocatalysis. We calculate the redox potentials of these compounds, making reference to experimental data when appropriate, identifying two degrees of tunability: a coarse adjustment, changing the metal center, allows for a wide range of redox potentials to be accessed (from +1.0 to –2.0 V vs. ferrocene/ferrocenium in acetonitrile solution) and a fine adjustment, the para-substituent of the benzoate derivative, which affects the redox potential in a smaller range based on the electron donating/withdrawing effects of the substituent. Ruthenium and osmium tetrabenzoate catalysts are prime candidates for next generation ammonia oxidation catalysts because their redox potentials fall within the direct ammonia fuel cell “viability zone” bracketed by the thermodynamic potentials of oxygen reduction (ORR) and nitrogen reduction (NRR). Rhodium tetrabenzoate species fall above the ORR potential, suggesting ammonia oxidation promoted by Rh 2 catalysts could instead be used to facilitate hydrogen production through coupling to hydrogen evolution at a cathode. The redox potentials of rhenium and iridium tetrabenzoate catalysts fall below the NRR potential suggesting that these compounds could be further investigated in the context of electrochemical ammonia synthesis. Each redox event studied involves electron transfer from the M–M δ* orbital regardless of choice of metal or benzoate ligand derivative; this leads us to believe that the chemical reactivity of the various studied compounds will be similar in the context of ammonia oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal-Complex Inks for Lower Cost and Improved Passivation for Silicon Photovoltaic Metallization

This contribution introduces the silicon PV community to screen-printable metal-complex inks that potentially will reduce Ag usage in Si PV metallization to one-quarter and costs to one-third that of traditional particle-based pastes while also improving passivation. Metal-complex inks are formulated using a Tollen’s reaction to produce inks with a high percentage of diamminesilver (I) cations (22 wt %) in a solution of acetate and formate anions. When printed and dried, labile ammonia ligands evaporate, leaving behind silver cations which, when reduced by formate anions and acetic acid, plate out silver and silver acetate. When annealed to just 300 °C a dense metallic silver film forms with excellent conductivity, and adhesion to silicon. When compared to traditional particle-based screen-printing pastes, the metal-complex inks are much denser, have higher conductivity, use less Ag, and are a fraction of the cost. Importantly, the inks anneal from 90 – 450 °C allowing for improved passivation schemes compared with fired SiNx. This contribution highlights first experiments on the improved passivation of metallized poly-Si/SiO2 passivated contacts using metal-complex Ag inks.

Young, David L. (ORCID:0000000340970493)↗
DOE OSTI2022

Methods and systems for electroless plating a first metal onto a second metal in a molten salt bath, and surface pretreatments therefore

Systems and methods for electroless plating a first metal onto a second metal in a molten salt bath including: a bath vessel holding a dry salt mixture including a dry salt medium and a dry salt medium of the first metal, and without the reductant therein, the dry salt mixture configured to be heated to form a molten salt bath; and the second metal is configured to be disposed in the molten salt bath and receive a pure coating of the first metal thereon by electroless plating in the molten salt bath, wherein the second metal is more electronegative than the first metal.

Freiderich, Melissa Ensor↗
DOE OSTI2022

Selective, adsorbate-induced spin state changes in transition metal-based metal-organic frameworks

An adsorbate-selective metal organic framework includes a transition metal; and a plurality of organic molecules coordinated to the transition metal so as to preserve open coordination sites for selectively adsorbing molecules that have low-lying π* orbitals. The transition metal has a lowest energy spin state in the presence of the selectively adsorbed molecules that are strongly bonding to the transition metal through π-donating interactions which is different than the lowest energy spin state in the absence of these adsorbed molecules. The transition metal has also a lowest energy spin state in the presence of non-selected molecules that are weakly bonding to the transition metal through σ- and/or π-accepting and/or donating interactions.

Long, Jeffrey R.↗
DOE OSTI2023

Methods and systems for electroless plating a first metal onto a second metal in a molten salt bath, and surface pretreatments therefore

Systems and methods for electroless plating a first metal onto a second metal in a molten salt bath including: a bath vessel holding a dry salt mixture including a dry salt medium and a dry salt medium of the first metal, and without the reductant therein, the dry salt mixture configured to be heated to form a molten salt bath; and the second metal is configured to be disposed in the molten salt bath and receive a pure coating of the first metal thereon by electroless plating in the molten salt bath, wherein the second metal is more electronegative than the first metal.

Freiderich, Melissa Ensor↗
DOE OSTI2024

Giant Apparent Optical Circular Dichroism in Thin Films of Bismuth-Based Hybrid Organic-Inorganic Metal Halide Semiconductor Through Preferred Orientation

Introducing chirality into organic/inorganic hybrid materials can impart chiroptical properties such as circular dichroism. The ability to tune chiroptical properties in self-assembled materials can have important implications for spintronic and optoelectronic applications. Here, a chiral organic cation, (R/S)-4-methoxy-a-methylbenzylammonium, is incorporated to synthesize the bismuth-based hybrid organic-inorganic metal halide semiconductor, (R/S-MeOMePMA)BiI4. Thin films of this Bi-based compound demonstrate large chiroptical responses, with circular dichroism anisotropy (gCD) values up to ˜0.1, close to the highest value observed in another chiral metal-halide semiconductor, (R-MBA2CuCl4). Detailed investigation reveals that this large gCD in (R/S-MeOMePMA)BiI4 is caused by the apparent CD effect. Careful selection of deposition conditions and the concomitant thin-film orientation enables the control of gCD, with maximum value observed when its thin film has a well-crystallized preferred (001) orientation parallel to the substrate. The results support a growing body of evidence that low symmetry plays an important role in achieving unusually large gCD in these chiral metal-halide materials and provides design rules for achieving large chiroptical response via morphology control.

chiroptic response↗
DOE OSTI2023

Metal Oxide Particles as Atmospheric Nuclei: Exploring the Role of Metal Speciation in Heterogeneous Efflorescence and Ice Nucleation

Mineral dust can indirectly impact climate by nucleation of atmospheric solids, for example, by heterogeneously nucleating ice in mixed-phase clouds or by impacting the phase of aerosols and clouds through contact nucleation. The effectiveness toward nucleation of individual components of mineral dust requires further study. Here, the nucleation behavior of metal oxide nanoparticle components of atmospheric mineral dust is investigated. A long-working-distance optical trap is used to study contact and immersion nucleation of ammonium sulfate by transition-metal oxides, and an environmental chamber is used to probe depositional ice nucleation on metal oxide particles. Previous theory dictates that ice nucleation and heterogeneous nucleation of atmospheric salts can be impacted by several factors including morphology, lattice match, and surface area. Here, we observe a correlation between the cationic oxidation states of the metal oxide heterogeneous nuclei and their effectiveness in causing nucleation in both contact efflorescence mode and depositional freezing mode. In contrast to the activity of contact efflorescence, the same metal oxide particles did not cause a significant increase in efflorescence relative humidity when immersed in the droplet. In conclusion, these experiments suggest that metal speciation, possibly as a result of cationic charge sites, may play a role in the effectiveness of nucleation that is initiated at particle surfaces.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Photocatalytic Semiconductor–Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips

Semiconductor–metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems. The SAC regime was achieved via the deposition of individual atomic cocatalysts on the semiconductor nanocrystals in solution. Utilizing a combination of electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy, we established the presence of single Au atoms on the ZnSe nanorod surface. Upon increased Au concentration, this transitions to metal tip growth. Photocatalytic hydrogen generation measurements reveal a strong dependence on the cocatalyst loading with a sharp response maximum in the SAC regime. Ultrafast dynamics studies show similar electron decay kinetics for the pristine ZnSe nanorods and the ZnSe-Au HNPs in either SAC or tipped systems. This indicates that electron transfer is not the rate-limiting step for the photocatalytic process. Combined with the structural-chemical characterization, we conclude that the enhanced photocatalytic activity is due to the higher reactivity of the single-atom sites. This holistic view establishes the significance of SAC-HNPs, setting the stage for designing efficient and sustainable heavy-metal-free photocatalyst nanoparticles for numerous applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Van der Waals density functional study of hydrocarbon adsorption and separation in metal–organic frameworks without open metal sites

Metal–organic frameworks (MOFs) have received significant attention thanks to their promising features in the storage and separation of guest molecules. MOFs without open metal sites are emerging as they are often less susceptible to poisoning compared to those with open metal sites. However, a complete understanding of the binding and gas separation mechanisms in such materials is still missing. In this work, we perform a comparative study of two classes of vanadium-based MOFs without open metal sites: MFM-300-V (III) and MFM-300-V (IV) , as well as MIL-47-V (III) and MIL-47-V (IV) . We employ first-principles van der Waals density functional theory to find the optimal binding conformations and binding energies of a series of small hydrocarbons within the pores of the aforementioned MOFs. Our study provides insight into the host–guest interactions in such MOFs without open metal sites, especially the role played by the bridging hydroxyl group (μ 2 –OH). We conclude that the bridging –OH group acts as a pseudo open metal site in these MOFs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Triphenylborane in Metal-Free Catalysis

The development and application of new organoboron reagents as Lewis acids in synthesis and metal-free catalysis have dramatically expanded over the past 20 years. In this context, we will show the recent uses of the simple and relatively weak Lewis acid BPh 3 —discovered 100 years ago—as a metal-free catalyst for various organic transformations. The first part will highlight catalytic applications in polymer synthesis such as the copolymerization of epoxides with CO 2 , isocyanate, and organic anhydrides to various polycarbonate copolymers and controlled diblock copolymers as well as alternating polyurethanes. This is followed by a discussion of BPh 3 as a Lewis acid component in the frustrated Lewis pair (FLP) mediated cleavage of hydrogen and hydrogenation catalysis. In addition, BPh 3 -catalyzed reductive N-methylations and C-methylations with CO 2 and silane to value-added organic products will be covered as well along with BPh 3 -catalyzed cycloadditions and insertion reactions. Collectively, this mini-review showcases the underexplored potential of commercially available BPh3 in metal-free catalysis.

Lewis acid↗