Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Measurement Science Laboratory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Cloud Uniformity Measurement from NASA's 2nd Fundamental Ice Crystal Icing Test Part 1 (Water Content & PSD)

This paper presents water content and particle measurements from the second Fundamental Ice Crystal Icing Physics test conducted in the NASA Propulsion Systems Laboratory. The water content measurements came from the Science Engineering Associates Multi-Element Probe and the Isokinetic Probe whereas the Artium Technologies, Inc. Phase Doppler Interferometer and High Speed Imaging instruments measured the particle size distribution. Ice particle accretion due to the ingestion of ice-crystals is attributed to numerous jet engine powerloss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. This work focuses on characterizing the icing cloud by traversing the instruments across the test section at four different conditions where velocity and water content were varied. For this test, the nozzle patterns were selected to make a uniform cloud in the center 6-inch diameter of the test section. Radial trends for the ice and water content measurements are presented and the melt ratio is calculated at the measurement locations. Particle size distributions are also presented. The measured water content, melt ratio, and particle size decreased moving out radially. Measured water content trends show uniformity to within 19.2% for the center 6 inches of the cloud, as intended. In addition, the total water content increased at centerline with velocity, whereas the melt ratio decreased.

Ice-Crystal Icing↗
NASA NTRSDate not supplied

Cloud Uniformity Measurements from NASA's 2nd Fundamental Ice Crystal Icing Test Part 1 (Water Content & PSD)

This paper presents water content and particle measurements from the second Fundamental Ice Crystal Icing Physics test conducted in the NASA Propulsion Systems Laboratory. The water content measurements came from the Science Engineering Associates Multi-Element Probe and the Isokinetic Probe whereas the Artium Technologies, Inc. Phase Doppler Interferometer and High Speed Imaging instruments measured the particle size distribution. Ice particle accretion due to the ingestion of ice-crystals is attributed to numerous jet engine powerloss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. This work focuses on characterizing the icing cloud by traversing the instruments across the test section at four different conditions where velocity and water content were varied. For this test, the nozzle patterns were selected to make a uniform cloud in the center 6-inch diameter of the test section. Radial trends for the ice and water content measurements are presented and the melt ratio is calculated at the measurement locations. Particle size distributions are also presented. The measured water content, melt ratio, and particle size decreased moving out radially. Measured water content trends show uniformity to within 19.2% for the center 6 inches of the cloud, as intended. In addition, the total water content increased at centerline with velocity, whereas the melt ratio decreased.

Ice-Crystal Icing↗
NASA NTRS1990

Mission analysis for coincident measurements of the Upper Atmosphere Research Satellite and Space Shuttle experiments

The launch and orbital characteristics of Space Shuttle missions which will maximize the coincident measurement opportunities between the Atmospheric Laboratory for Applications and Science (ATLAS) and the Upper Atmosphere Research Satellite (UARS) experiments are presented. Updated UARS orbit conditions are used and several ATLAS orbit constraints are incorporated, and the study is expanded to include other classes of instruments on the two satellites. The effects of launch time, altitude, and orbit inclination on the number and latitudinal distribution of coincident measurement opportunities for the UARS and Shuttle experiments are investigated. Large numbers of coincident measurements are possible for UARS and ATLAS limb-viewing experiments, but their distribution is greatly dependent on the inclination of the satellites and initial equatorial crossing times. Results indicate that a great number of coincident measurements may be obtained between limb-scanning devices (300-400) and that observation of the extreme latitudes (70-80 degrees) is obtained with an ATLAS inclination of 57 degrees.

Harrison, Edwin F.↗
NASA NTRS2009

Innovations in Delta Differential One-Way Range: from Viking to Mars Science Laboratory

The Deep Space Network has provided the capability for very-long-baseline interferometry measurements in support of spacecraft navigation since the late 1970s. Both system implementation and the importance of such measurements to flight projects have evolved significantly over the past three decades. Innovations introduced through research and development programs have led to much better performance. This paper provides an overview of the development and use of interferometric tracking techniques in the DSN starting with the Viking era and continuing with a description of the current system and its planned use to support Mars Science Laboratory.

VLBI Spacecraft Navigation↗
NASA NTRS1998

Summary Report of Mission Acceleration Measurements for MSL-1: STS-83, Launched April 14, 1997; STS-94, Launched July 1, 1997

The microgravity environment of the Space Shuttle Columbia was measured during the STS-83 and STS-94 flights of the Microgravity Science Laboratory (MSL-1) mission using four different accelerometer systems: the Orbital Acceleration Research Experiment (OARE), the Space Acceleration Measurement System (SAMS), the Microgravity Measurement Assembly (MMA), and the Quasi-Steady Acceleration Measurement (QSAM) system. All four accelerometer systems provided investigators with acceleration measurements downlinked in near-real-time. Data from each system was recorded for post-mission analysis. The OARE measured the Shuttle's acceleration with high resolution in the quasi-steady frequency regime below about 0.1 Hz. The SAMS provided investigators with higher frequency acceleration measurements up to 25 Hz. The QSAM and MMA systems provided investigators with quasi-steady and higher frequency (up to 100 Hz) acceleration measurements, respectively. The microgravity environment related to various Orbiter maneuvers, crew activities, and experiment operations as measured by the OARE and MMA is presented and interpreted in section 8 of this report.

Moskowitz, Milton E.↗
NASA NTRS2013

Entry Descent and Landing Workshop Proceedings: The Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation (MEDLI) Hardware - Volume 1

Objectives: Measure Pressure: a) Confirm spacecraft aerodynamics. b) Independently measure attitude. c) Determine density profile. d) Determine wind component. Measure Temperature: a) Verify heating levels on spacecraft surface. b) Determine recession amount and rate. c) Validate material response at Mars conditions. The better we understand the Mars entry environment, the better we can design the next spacecraft.

Munk, Michelle M.↗
NASA NTRS1988

Solar Spectrum (SOLSPEC) measurement from 180 to 3000 nanometers

The SOLSPEC experiment, planned for the Atmospheric Laboratory for Applications and Science (ATLAS 1) NASA mission, is described. The purpose of this experiment is the measurement of the absolute solar irradiances in the wavelength range from 180 to 3000 nm and the variabilities of the solar irradiances in this wavelength range. Measurements of the irradiances and variabilities are used in: (1) solar-terrestrial/planetary relationships, in particular aeronomy of the stratosphere and mesosphere; (2) climatoglogy; and (3) solar physics.

Thuiller, G.↗
NASA NTRS1991

Science Data Center concepts for moderate-sized NASA missions

The paper describes the approaches taken by the NASA Science Data Operations Center to the concepts for two future NASA moderate-sized missions, the Orbiting Solar Laboratory (OSL) and the Tropical Rainfall Measuring Mission (TRMM). The OSL space science mission will be a free-flying spacecraft with a complement of science instruments, placed in a high-inclination, sun synchronous orbit to allow continuous study of the sun for extended periods. The TRMM is planned to be a free-flying satellite for measuring tropical rainfall and its variations. Both missions will produce 'standard' data products for the benefit of their communities, and both depend upon their own scientific community to provide algorithms for generating the standard data products.

Price, R.↗
NASA NTRS1988

Active Cavity Radiometer (ACR)

The objective of the Active Cavity Radiometer (ACR) experiment on the Atmospheric Laboratory for Applications and Science (ATLAS) mission is the measurement of the total solar irradiance with state-of-the-art accuracy and precision. This experiment is part of an ongoing program of space flight observations to study short- and long-term variations in the total solar output of optical energy. Precise observations of solar total irradiance provide information on the solar cycle and other long-term trends in solar output that are of climatological significance as well as short-term solar physics phenomena such as radiation anisotropy, active region structure, missing flux due to sunsports, bolometry of solar flares, global oscillations, coronal holes, and large-scale convective flows. The principal role of the ATLAS ACR observations will be in support of extended solar irradiance experiments on free-flying satellites. Annual in-flight comparison of observations by both ATLAS and free-flying experiments is an important part of sustaining the long-term precision of the climatological solar irradiance data base at the required + or - 0.1 percent level. Another role for ATLAS solar irradiance measurements will be establishment of the radiation scale at the solar total flux level in the International System of Units (SI). Two types of pyrheliometers, the ACR and SOLCON, will be directly intercompared during the ATLAS 1 mission. Addition of other sensors is planned for future reflights. Comparisons of solar observations by different pyrheliometers in the shuttle space environment will provide the most definitive experiment for determining their accuracy in defining the radiation scale at the solar total flux level.

Willson, R. C.↗
NASA NTRS2013

Execution-Error Modeling and Analysis of the GRAIL Spacecraft Pair

The GRAIL spacecraft, Ebb and Flow (aka GRAIL-A and GRAIL-B), completed their prime mission in June and extended mission in December 2012. The excellent performance of the propulsion and attitude control subsystems contributed significantly to the mission's success. In order to better understand this performance, the Navigation Team has analyzed and refined the execution-error models for delta-v maneuvers. There were enough maneuvers in the prime mission to form the basis of a model update that was used in the extended mission. This paper documents the evolution of the execution-error models along with the analysis and software used.

preprocessing↗
NASA NTRS2017

Evaluation of HZETRN on the Martian Surface: Sensitivity Tests and Model Results

The Mars Science Laboratory Radiation Assessment Detector (MSLRAD) is providing continuous measurements of dose, dose equivalent, and particle flux on the surface of Mars. These measurements have been highly useful in validating environmental and radiation transport models that will be heavily relied upon for future deep space missions. In this work, the HZETRN code is utilized to estimate radiation quantities of interest on the Martian surface. A description of the modeling approach used with HZETRN is given along with the various input models and parameters used to define the galactic cosmic ray (GCR) environment and Martian geometry. Sensitivity tests are performed to gauge the impact of varying several input factors on quantities being compared to MSLRAD data. Results from these tests provide context for inter-code comparisons presented in a companion paper within this issue. It is found that details of the regolith and atmospheric composition have a minimal impact on surface flux, dose, and dose equivalent. Details of the density variation within the atmosphere and uncertainties associated with specifying the vertical atmospheric thickness are also found to have minimal impact. Two widely used GCR models are used as input into HZETRN and it is found that the associated surface quantities are within several percent of each other.

Tony C Slaba↗
NASA NTRS1992

Correlative measurement opportunities between ATLAS-1 and UARS experiments

The first ATmospheric Laboratory for Applications and Science (ATLAS-1) mission was flown aboard the Space Shuttle from March 24 to April 2, 1992. The ATLAS-1 instruments provided a large number of measurements which were coincident with observations from experiments on the Upper Atmosphere Research Satellite (UARS). During the ATLAS-1 mission, simulations were performed to predict when and where coincident measurements between ATLAS and UARS instruments would occur. These predictions were used to develop instrument operation schedules to maximize the correlative opportunities between the two satellites. Results of the simulations provide valuable information for the ATLAS and UARS scientists to compare measurements between various instruments on the two satellites.

Harrison, Edwin F.↗
NASA NTRS1995

ATLAS-3 correlative measurement opportunities with UARS and surface observations

The third ATmospheric Laboratory for Applications and Science (ATLAS-3) mission was flown aboard the Space Shuttle launched on November 3, 1994. The mission length was approximately 10 days and 22 hours. The ATLAS-3 Earth-viewing instruments provided a large number of measurements which were nearly coincident with observations from experiments on the Upper Atmosphere Research Satellite (UARS). Based on ATLAS-3 instrument operating schedules, simulations were performed to determine when and where correlative measurements occurred between ATLAS and UARS instruments, and between ATLAS and surface observations. Results of these orbital and instrument simulations provide valuable information for scientists to compare measurements between various instruments on the two satellites and at selected surface sites.

Harrison, Edwin F.↗
NASA NTRS2014

Reconciling the Differences between the Measurements of CO2 Isotopes by the Phoenix and MSL Landers

Precise stable isotope measurements of the CO2 in the martian atmosphere have the potential to provide important constraints for our understanding of the history of volatiles, the carbon cycle, current atmospheric processes, and the degree of water/rock interaction on Mars. There have been several different measurements by landers and Earth based systems performed in recent years that have not been in agreement. In particular, measurements of the isotopic composition of martian atmospheric CO2 by the Thermal and Evolved Gas Analyzer (TEGA) instrument on the Mars Phoenix Lander and the Sample Analysis at Mars (SAM) instrument on the Mars Science Laboratory (MSL) are in stark disagreement. This work attempts to use measurements of mass 45 and mass 46 of martian atmospheric CO2 by the SAM and TEGA instruments to search for agreement as a first step towards reaching a consensus measurement that might be supported by data from both instruments.

Niles, P. B.↗
NASA NTRSDate not supplied

Lessons Learned from Aerothermal Flight Data on NASA Mars Entry Vehicles

The NASA Mars Science Laboratory (MSL) and Mars 2020 entry vehicles included temperature measurements inside and direct heat flux on the surface of the thermal protection system (TPS) material. The instrumentation was included to begin addressing predictive capabilities for aerodynamic heating and ablative TPS material response. The MSL aeroshell included temperature measurements at seven heatshield locations, from which total aerodynamic heating was reconstructed. The Mars 2020 instrumentation suite included eleven heatshield measurement locations and new backshell measurements at nine locations: six with temperature sensors, two with sensors to directly measure total heat flux, and one to measure radiative heat flux. Both instrumentation suites returned full sets of data, with all temperature sensors nearest to the surface surviving entry, indicating minimal material recession. Heatshield boundary layer transition (BLT) was observed for both vehicles prior to the time of peak heating, with transition starting near the shoulder and progressing towards the stagnation area. MSL’s higher speed on approach to Mars resulted in higher total heating compared to Mars 2020, with the maximum occurring near the heatshield’s leeside shoulder. The Mars 2020 backshell heating data indicate significant contributions from shock layer radiation. Heating from Navier-Stokes flowfield calculations are in family with reconstructed heating. The paper covers the instrumentation, BLT and reconstructed heating on both heatshields, backshell heating for Mars 2020, TPS performance, and predicted versus reconstructed heat fluxes. Opportunities for improved design approaches for future Mars missions are discussed, especially for the upcoming Mars Sample Return mission.

Mars Science Laboratory↗
NASA NTRSDate not supplied

Lessons Learned from Aerothermal Flight Data on NASA Mars Entry Vehicles

The NASA Mars Science Laboratory (MSL) and Mars 2020 entry vehicles included temperature measurements inside and direct heat flux on the surface of the thermal protection system (TPS) material. The instrumentation was included to begin addressing predictive capabilities for aerodynamic heating and ablative TPS material response. The MSL aeroshell included temperature measurements at seven heatshield locations, from which total aerodynamic heating was reconstructed. The Mars 2020 instrumentation suite included eleven heatshield measurement locations and new backshell measurements at nine locations: six with temperature sensors, two with sensors to directly measure total heat flux, and one to measure radiative heat flux. Both instrumentation suites returned full sets of data, with all temperature sensors nearest to the surface surviving entry, indicating minimal material recession. Heatshield boundary layer transition (BLT) was observed for both vehicles prior to the time of peak heating, with transition starting near the shoulder and progressing towards the stagnation area. MSL’s higher speed on approach to Mars resulted in higher total heating compared to Mars 2020, with the maximum occurring near the heatshield’s leeside shoulder. The Mars 2020 backshell heating data indicate significant contributions from shock layer radiation. Heating from Navier-Stokes flowfield calculations are in family with reconstructed heating. The paper covers the instrumentation, BLT and reconstructed heating on both heatshields, backshell heating for Mars 2020, TPS performance, and predicted versus reconstructed heat fluxes. Opportunities for improved design approaches for future Mars missions are discussed, especially for the upcoming Mars Sample Return mission.

Mars Science Laboratory↗
NASA NTRS2014

A Comparison of Potential IM-CW Lidar Modulation Techniques for ASCENDS CO2 Column Measurements From Space

Global atmospheric carbon dioxide (CO2) measurements through the Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) Decadal Survey recommended space mission are critical for improving our understanding of CO2 sources and sinks. IM-CW (Intensity Modulated Continuous Wave) lidar techniques are investigated as a means of facilitating CO2 measurements from space to meet the ASCENDS science requirements. In previous laboratory and flight experiments we have successfully used linear swept frequency modulation to discriminate surface lidar returns from intermediate aerosol and cloud contamination. Furthermore, high accuracy and precision ranging to the surface as well as to the top of intermediate clouds, which is a requirement for the inversion of the CO2 column-mixing ratio from the instrument optical depth measurements, has been demonstrated with the linear swept frequency modulation technique. We are concurrently investigating advanced techniques to help improve the auto-correlation properties of the transmitted waveform implemented through physical hardware to make cloud rejection more robust in special restricted scenarios. Several different carrier based modulation techniques are compared including orthogonal linear swept, orthogonal non-linear swept, and Binary Phase Shift Keying (BPSK). Techniques are investigated that reduce or eliminate sidelobes. These techniques have excellent auto-correlation properties while possessing a finite bandwidth (by way of a new cyclic digital filter), which will reduce bias error in the presence of multiple scatterers. Our analyses show that the studied modulation techniques can increase the accuracy of CO2 column measurements from space. A comparison of various properties such as signal to noise ratio (SNR) and time-bandwidth product are discussed.

Campbell, Joel F.↗