Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Marx”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

NASA/MSFC nozzle test bed

As part of an effort to improve the state-of-the-art in nozzle technology, a solid propulsion test bed facility is being designed and will be located at Marshall Space Flight Center. The test bed will consist of a plasma arc facility and several small scale rocket motor test facilities ranging in size from the ballistic environmental generator motor with a 1/2 in. diameter throat to the MNASA motor with a 9 and 1/2 in. diameter throat capability. The test bed system will be used primarily to study materials behavior from the standpoint of char, erosion, and thermal stress phenomena.

Crose, James G.↗
NASA NTRS1990

Determining Polarities Of Distant Lightning Strokes

Method for determining polarities of lightning strokes more than 400 km away. Two features of signal from each stroke correlated. New method based on fact each stroke observed thus far for which polarity determined unambiguously, initial polarity of tail same as polarity of initial deflection before initial-deflection signal altered by propagation effects. Receiving station equipped with electric-field-change antenna coupled to charge amplifier having time constant of order of 1 to 10 seconds. Output of amplifier fed to signal-processing circuitry, which determines initial polarity of tail.

Blakeslee, Richard J.↗
NASA NTRS1990

Numerical solution of 3D Navier-Stokes equations with upwind implicit schemes

An upwind MUSCL type implicit scheme for the three-dimensional Navier-Stokes equations is presented. Comparison between different approximate Riemann solvers (Roe and Osher) are performed and the influence of the reconstructions schemes on the accuracy of the solution as well as on the convergence of the method is studied. A new limiter is introduced in order to remove the problems usually associated with non-linear upwind schemes. The implementation of a diagonal upwind implicit operator for the three-dimensional Navier-Stokes equations is also discussed. Finally the turbulence modeling is assessed. Good prediction of separated flows are demonstrated if a non-equilibrium turbulence model is used.

Marx, Yves P.↗
NASA NTRS1990

Method and apparatus for determining return stroke polarity of distant lightning

A method is described for determining the return stroke polarity of distant lightning for distances beyond 600 km by detecting the electric field associated with a return stroke of distant lightning, and processing the electric field signal to determine the polarity of the slow tail of the VLF waveform signal associated with the detected electric field. The polarity of the return stroke of distant lightning is determined based upon the polarity of the slow tail portion of the waveform.

Blakeslee, Richard J.↗
NASA NTRS1991

Electrification in winter storms and the analysis of thunderstorm overflight

The emergence of 24 hr operational lightning detection networks has led to the finding that positive lightning strokes, although still much fewer in number than the normal negative strokes, are present in summer and winter storms. Recent papers address the importance of understanding the meteorological conditions which lead to a dominance of one polarity of stroke over another; the appearance of positive strokes at the end of a storm appeared to presage the end-of-storm downdraft and subsidence leading to downburst activity. It is beginning to appear that positive strokes may be important meteorological indicators. Significant research accomplishments on the following topics are addressed: (1) a study to verify that the black boxes used in the lightning networks to detect both negative and positive strokes to ground were accurate; (2) the use of slow tails to determine the polarity of distant lightning; (3) lightning initiation in winter vs. summer storms; (4) the upgrade of sensors for the measurement of electric field signals associated with lightning; (5) the analysis of lightning flash records from storms between 40 and 125 km from the sensor; and (6) an interesting aspect of the initiation process which involves the physical processes driving the stepped leader. The focus of current research and future research plans are presented.

Brook, Marx↗
NASA NTRS1991

Lightning to the upper atmosphere: A vertical light pulse from the top of a thunderstorm as seen by a payload bay TV camera of the space shuttle

An examination and preliminary analysis of video images of thunderstorms as seen by a payload bay TV camera of the Space Shuttle provided examples of lightning in the stratosphere above thunderstorms. These images were obtained on several recent Shuttle flights while conducting the Mesoscale Lightning Experiment (MLE). MLE was an experiment to obtain night time images from space of large storm complexes with lightning. These images are used to provide data for the design of specialized instrumentation which will provide quantitative measurements of global lightning. Eight video sequences were selected because they illustrate near vertical discharges in the stratosphere above thunderstorms. Although there are previous reports in the literature, these are the first images from the viewpoint of an orbiting spacecraft. The written material is primarily a companion to a video presentation.

Boeck, William L.↗
NASA NTRS1990

Numerical simulation of turbulent flows around airfoil and wing

During the last years the simulation of compressible viscous flows has received much attention. While the numerical methods were improved drastically, a satisfactory modeling of the Reynolds stresses is still missing. In this paper, after a short description of the numerical procedure used for solving the Reynolds equations, experiments with a promising simple turbulence model are discussed.

Marx, Yves P.↗
NASA NTRS1991

A practical implementation of turbulence models for the computation of three-dimensional separated flows

An upwind MUSCL-type implicit scheme for the three-dimensional Navier-Stokes equations is presented and details on the implementation for three-dimensional flows of a 'diagonal' upwind implicit operator are developed. Turbulence models for separated flows are also described with an emphasis on the numerical specificities of the Johnson-King nonequilibrium model. Good predictions of separated two- and three-dimensional flows are demonstrated.

Marx, Yves P.↗
NASA NTRS1992

Method and apparatus for determining return stroke polarity of distant lightning

A method is described for determining the return stroke polarity of distant lightning for distances beyond 600 km by detecting the electric field associated with a return stroke of distant lightning, and processing the electric field signal to determine the polarity of the slow tail of the VLF waveform signal associated with the detected electric field. The polarity of the return stroke of distant lightning is determined based upon the polarity of the slow tail portion of the waveform.

Blakeslee, Richard J.↗
NASA NTRS1992

A hybrid job-shop scheduling system

The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

Hellingrath, Bernd↗
NASA NTRS1993

Electrification in winter storms and the analysis of thunderstorm overflight data

We have been focusing our study of electrification in winter storms on the lightning initiation process, making inferences about the magnitude of the electric fields from the initial pulses associated with breakdown, i.e., with the formation of the initial streamers. The essence of the most significant finding is as follows: (1) initial breakdown radiation pulses from stepped leaders prior to the first return stroke are very large, reaching values of 20-30 Volts/meter, comparable to return stroke radiation; and (2) the duration of the stepped leader, from the initial detectable radiation pulse to the return stroke onset, is very-short-ranging from a minimum 1.5 ms to a maximum of 4.5 ms. This past summer (June-August of 1991) we participated in the CAPE program at the Kennedy Space Center in order to acquire data on stepped leaders in summer storms with the same equipment used to get the winter storm data. We discovered that the vigorous leaders seen in winter so frequently were present in summer storms, although not as large in amplitude and certainly not as frequent.

Brook, Marx↗
NASA NTRS1992

The Effects of Use of Civil Airworthiness Criteria on U.S. Air Force Acquisition, Test and Evaluation Practices

In response to the initiatives to streamline, not to mention comply with the Public Law for Non-Developmental Item Preference, the Department of Defense (DOD) has increased its use of commercial products. The Air Force has, over the past 15 years, been adapting Federal Aviation Administration (FAA) certified aircraft to perform many of its airlift and training missions. Counting the T-1A Jayhawk Trainer (Beechjet 400), in excess of 500 total aircraft, covering 15 different types, will have been procured since 1978. Needless to say, significant reform of the "classical" DOD and Air Force way of doing business has been necessary. Major strides have been made by the Transport Directorate of the Aircraft Program Office in the area of test and evaluation, with integrated qualification and operational testing (QT &E/QOT &E) and airworthiness certification testing by the FAA. As well, significant changes in contracting practices and the use of commercial (vice military) specifications for qualification criteria have been realized. This paper will relate some of these significant strides in "commercializing" and streamlining the DOD acquisition and test and evaluation processes. Additionally, it will review both regulatory changes made and recommended. It concludes with a compilation of lessons learned and recommendations for further streamlining of the DOD processes.

Flight Testing↗
NASA NTRS1995

A study of lightning in winter thunderstorms and the analysis of thunderstorm overflight data

Thunderstorms and the activities associated with them was the emphasis of this final report. The primary goal of the investigation of the dynamics, microphysics, and the electrical properties of tropical thunderstorms, was to understand the process or processes which initiate the precipitation in various convective clouds. A concept that the degree of atmospheric instability that determines the updraft velocity is different between those storms that generate electrical activity and those that do not. This is apparent in temperate latitudes, but in tropical regions, little knowledge of these interactions is available. Several ground monitoring stations have been set up and, along with a waveform recorder at one of the stations, the data collected from these stations will be analyzed in conjunction with other data collected from ship and airborne radars and airborne in situ measurements of electrical activity in coordination with the TOGA-COARE program.

Brook, Marx↗
NASA NTRS1994

The simulated Indian monsoon: A GCM sensitivity study

A series of sensitivity experiments are conducted in an attempt to understand and correct deficiencies in the simulation of the seasonal mean Indian monsoon with a global atmospheric general circulation model. The seasonal mean precipitation is less than half that observed. This poor simulation in seasonal integrations is independent of the choice of initial conditions and global sea surface temperature data used. Experiments are performed to test the sensitivity of the Indian monsoon simulation to changes in orography, vegetation, soil, wetness, and cloudiness. The authors find that the deficiency of the model precipitation simulation may be attributed to the use of an enhanced orography in the integrations. Replacement of this orography with a mean orography results in a much more realistic simulation of Indian monsoon circulation and rainfall. Experiments with a linear primitive equation model on the sphere suggest that this striking improvement is due to modulations of the orographically forced waves in the lower troposphere. This improvement in the monsoon simulation is due to the kinematic and dynamical effects of changing the topography, rather than the thermal effects, which were minimal. The magnitude of the impact on the Indian monsoon of the other sensitivity experiments varied considerably, but was consistently less than the impact of using the mean orography. However, results from the soil moisture sensitivity experiments suggest a possibly important role for soil moisture in simulating tropical precipitation, including that associated with the Indian monsoon.

Fennessy, M. J.↗
NASA NTRS1995

Observations of lightning in the stratosphere

An examination and analysis of video images of lightning, captured by the payload bay TV cameras of the space shuttle, provided a variety of examples of lightning in the stratosphere above thunderstorms. These images were obtained on several recent shuttle flights while conducting the Mesoscale Lightning Experiment (MLE). The images of stratospheric lightning illustrate the variety of filamentary and broad vertical discharges in the stratosphere that may accompany a lightning flash. A typical event is imaged as a single or multiple filament extending 30 to 40 km above a thunderstorm that is illuminated by a series of lightning strokes. Examples are found in temperate and tropical areas, over the oceans, and over the land.

Boeck, William L.↗
NASA NTRS1994

Integrating Design and Manufacturing for a High Speed Civil Transport Wing

The aerospace industry is currently addressing the problem of integrating design and manufacturing. Because of the difficulties associated with using conventional, procedural techniques and algorithms, it is the authors' belief that the only feasible way to integrate the two concepts is with the development of an appropriate Knowledge-Based System (KBS). The authors propose a methodology for an aircraft producibility assessment, including a KBS, that addresses both procedural and heuristic aspects of integrating design and manufacturing of a High Speed Civil Transport (HSCT) wing. The HSCT was chosen as the focus of this investigation since it is a current NASA/aerospace industry initiative full of technological challenges involving many disciplines. The paper gives a brief background of selected previous supersonic transport studies followed by descriptions of key relevant design and manufacturing methodologies. Georgia Tech's Concurrent Engineering/Integrated Product and Process Development methodology is discussed with reference to this proposed conceptual producibility assessment. Evaluation criteria are presented that relate pertinent product and process parameters to overall product producibility. In addition, the authors' integration methodology and reasons for selecting a KBS to integrate design and manufacturing are presented in this paper. Finally, a proposed KBS is given, as well as statements of future work and overall investigation objectives.

Marx, William J.↗
NASA NTRS1994

Knowledge-Based Manufacturing and Structural Design for a High Speed Civil Transport

The aerospace industry is currently addressing the problem of integrating manufacturing and design. To address the difficulties associated with using many conventional procedural techniques and algorithms, one feasible way to integrate the two concepts is with the development of an appropriate Knowledge-Based System (KBS). The authors present their reasons for selecting a KBS to integrate design and manufacturing. A methodology for an aircraft producibility assessment is proposed, utilizing a KBS for manufacturing process selection, that addresses both procedural and heuristic aspects of designing and manufacturing of a High Speed Civil Transport (HSCT) wing. A cost model is discussed that would allow system level trades utilizing information describing the material characteristics as well as the manufacturing process selections. Statements of future work conclude the paper.

Marx, William J.↗