Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPOLARITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Roughness measurements with multipolarization aircraft data

Multipolarization SAR data were collected over the SIR-B target area near Fresno, California, a few days before the Shuttle flight. Attempts to use these data to evaluate roughness models were unsuccessful. It is speculated that the processing of those data to give good total swath and target contrast resulted in very little variation among the bare fields. Special processing to provide adequate contrast among the targets of interest and to account for a large incidence angle variation may be necessary to make these data useful for this type of study.

Engman, E. T.↗

JPL multipolarization workstation - Hardware, software and examples of data analysis

A low-cost stand-alone interactive image processing workstation has been developed for operations on multipolarization JPL aircraft SAR data, as well as data from future spaceborne imaging radars. A recently developed data compression technique is used to reduce the data volume to 10 Mbytes, for a typical data set, so that interactive analysis may be accomplished in a timely and efficient manner on a supermicrocomputer. In addition to presenting a hardware description of the work station, attention is given to the software that has been developed. Three illustrative examples of data analysis are presented.

Burnette, Fred↗

The effects of undersampling on multipolarization SAR images

The scattering matrix and Stokes matrix formats for multipolarization synthetic aperture radar (SAR) images are introduced. The effects of converting to the Stokes matrix format, without first doubling the sampling rate to allow for the conversion from a complex to an intensity format is quantified and discussed. It is shown that for most applications the Stokes matrix format is acceptable, since errors introduced by undersampling tend to average out when large numbers of pixels are averaged. For those applications requiring analysis of single image pixels, the scattering matrix format is recommended.

Freeman, A.↗

Per-point and per-field contextual classification of multipolarization and multiple incidence angle aircraft L-band radar data

Multipolarized aircraft L-band radar data are classified using two different image classification algorithms: (1) a per-point classifier, and (2) a contextual, or per-field, classifier. Due to the distinct variations in radar backscatter as a function of incidence angle, the data are stratified into three incidence-angle groupings, and training and test data are defined for each stratum. A low-pass digital mean filter with varied window size (i.e., 3x3, 5x5, and 7x7 pixels) is applied to the data prior to the classification. A predominately forested area in northern Florida was the study site. The results obtained by using these image classifiers are then presented and discussed.

Hoffer, Roger M.↗

Multipolarization P-, L-, and C-band radar for coastal zone mapping - The Louisiana example

Multipolarization P-, L-, and C-band airborne SAR data sets were acquired over a coastal zone and a forested wetland of southern Louisiana. The data sets were used with field-collected surface-parameter data in order to determine the value of SAR systems in assessing and mapping coastal-zone surface features. The coastal-zone surface features in this study are sediments, sediment distribution, and the formation of new isles and banks. Results of the data analysis indicate that the P-band radar with 68-cm wavelength is capable of detecting the submerged sediment if the area is very shallow (i.e., a water depth of less than one meter). The penetration capability of P-band radar is also demonstrated in the forested wetland area. The composition and condition of the ground surface can be detected, as well as the standing water beneath dense tree leaves.

Wu, Shih-Tseng↗

Relationships between multipolarized radar backscatter and slash pine stand parameters

Multipolarized L-band (24.5 cm) aircraft radar data was obtained for a primarily forested area in northern Florida. Based on the results of previous studies by Hoffer and Hussin (1989), a swath of medium incidence angle (35-25 deg) data was defined. Three groups of slash pine stands were located in the data: 4- to 17-year-old plantations, 18- to 48-year-old plantations, and 16- to 53-year-old natural stands. Stand data obtained from the forest-products companies operating in the area include age, tree height, diameter-at-breast height, basal area, volume (cords/acre), and density (trees/acre). Each of these stand parameters were compared to each of the four polarizations (HH, VV, VH, and HV) of the radar data for each group of stands. Statistically significant relationships were found between the radar backscatter and the forest stand parameters only for the 4- to 17-year-old slash pine plantation stands. In general, the cross-polarized radar backscatter was more highly correlated with the various stand parameters than the like-polarized backscatter, and the VV-polarized data were more highly correlated than the HH-polarized data.

Hussin, Yousif Ali↗

Application of high-quality SiO2 grown by multipolar ECR source to Si/SiGe MISFET

A 5 nm-thick SiO2 gate was grown on an Si(p+)/Si(0.8)Ge(0.2) modulation-doped heterostructure at 26 C with an oxygen plasma generated by a multipolar electron cyclotron resonance source. The ultrathin oxide has breakdown field above 12 MV/cm and fixed charge density about 3 x 10 exp 10/sq cm. Leakage current as low as 1/micro-A was obtained with the gate biased at 4 V. The MISFET with 0.25 x 25 sq m gate shows maximum drain current of 41.6 mA/mm and peak transconductance of 21 mS/mm.

Sung, K. T.↗

Multifrequency, Multipolarization External Calibration of the SIR-C/X-SAR Radars

Progress and the future plans for the following objectives are discussed: (1) Assess the accuracy at which the SIR-C/X-SAR standard data products can be calibrated through the use of ground calibrators to estimate the end-to-end system polarization calibration constants (or distortion parameters) and incorporate the constants into the data processing; (2) Study the cross-calibration between three multipolarization systems: SIR-C, the National Aeronautics and Space Administration/Jet Propulsion Laboratory (NASA/JPL) DC-8 SAR, and the University of Michigan ground-based polarimetric scatterometer; (3) Evaluate the calibration "stability" of SIR-C/X-SAR (measured by variations in the calibration constants) over the range swath width and over a specified distance in azimuth. Variations over a 12-hour period (between ascending and descending passes) will also be studied; and (4) Develop a cost-effective calibration plan including development of inexpensive polarimetric active calibrators.

Freeman, Anthony↗

Experimental investigation of microwave interaction with magnetoplasma in miniature multipolar configuration using impedance measurements

A miniature microwave plasma source employing both radial and axial magnetic fields for plasma confinement has been developed for micro-propulsion applications. Plasma is initiated by launching microwaves via a short monopole antenna to circumvent geometrical cutoff limitations. The amplitude and phase of the forward and reflected microwave power is measured to obtain the complex reflection coefficient from which the equivalent impedance of the plasma source is determined. Effect of critical plasma density condition is reflected in the measurements and provides insight into the working of the miniature plasma source. A basic impedance calculation model is developed to help in understanding the experimental observations. From experiment and theory, it is seen that the equivalent impedance magnitude is controlled by the coaxial discharge boundary conditions, and the phase is influenced primarily by the plasma immersed antenna impedance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A DETAILED SPATIOKINEMATIC MODEL OF THE CONICAL OUTFLOW OF THE MULTIPOLAR PLANETARY NEBULA NGC 7026

We present extensive, long-slit, high-resolution coverage of the complex planetary nebula (PN) NGC 7026. We acquired 10 spectra using the Manchester Echelle Spectrometer at San Pedro Martir Observatory in Baja California, Mexico, and each shows exquisite detail, revealing the intricate structure of this object. Incorporating these spectra into the three-dimensional visualization and kinematic program SHAPE and using Hubble Space Telescope images of NGC 7026, we have produced a detailed structural and kinematic model of this PN. NGC 7026 exhibits remarkable symmetry consisting of three lobe pairs and four sets of knots, all symmetrical about the nucleus and displaying a conical outflow. Comparing the three-dimensional structure of this nebula to recent XMM-Newton X-ray observations, we investigate the extended X-ray emission in relation to the nebular structure. We find that the X-ray emission, while confined to the closed, northern lobes of this PN, shows an abrupt termination in the middle of the southeast lobe, which our long slit data show to be open. This is where the shocked fast wind seems to be escaping the interior of the nebula and the X-ray emission rapidly cools in this region.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETAR GIANT FLARES-FLUX ROPE ERUPTIONS IN MULTIPOLAR MAGNETOSPHERIC MAGNETIC FIELDS

We address a primary question regarding the physical mechanism that triggers the energy release and initiates the onset of eruptions in the magnetar magnetosphere. Self-consistent stationary, axisymmetric models of the magnetosphere are constructed based on force-free magnetic field configurations that contain a helically twisted force-free flux rope. Depending on the surface magnetic field polarity, there exist two kinds of magnetic field configurations, inverse and normal. For these two kinds of configurations, variations of the flux rope equilibrium height in response to gradual surface physical processes, such as flux injections and crust motions, are carefully examined. We find that equilibrium curves contain two branches: one represents a stable equilibrium branch, and the other an unstable equilibrium branch. As a result, the evolution of the system shows a catastrophic behavior: when the magnetar surface magnetic field evolves slowly, the height of the flux rope would gradually reach a critical value beyond which stable equilibriums can no longer be maintained. Subsequently, the flux rope would lose equilibrium and the gradual quasi-static evolution of the magnetosphere will be replaced by a fast dynamical evolution. In addition to flux injections, the relative motion of active regions would give rise to the catastrophic behavior and lead to magnetic eruptions as well. We propose that a gradual process could lead to a sudden release of magnetosphere energy on a very short dynamical timescale, without being initiated by a sudden fracture in the crust of the magnetar. Some implications of our model are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Probing Electronic Correlations in Actinide Materials Using Multipolar Transitions

We report nonresonant inelastic x-ray scattering from the semicore 5d levels of several actinide compounds. Dipole-forbidden, high-multipole features form a rich bound-state spectrum dependent on valence electron configuration and spin-orbit and Coulomb interactions. Cross-material comparisons, together with the anomalously high Coulomb screening required for agreement between atomic-multiplet theory and experiment, demonstrate sensitivity to the neighboring electronic environment, such as is needed to address longstanding questions of electronic localization and bonding in 5f compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for multipolar instability in URu 2 Si 2 studied by ultrasonic measurements under pulsed magnetic field

In this study, the elastic properties of URu 2 Si 2 in the high magnetic field region above 40 T, over a wide temperature range from 1.5 to 120 K, were systematically investigated by means of high-frequency ultrasonic measurements. The investigation was performed at high magnetic fields to better investigate the innate bare 5f-electron properties, since the unidentified electronic thermodynamic phase of unknown origin, the so-called “hidden order” (HO), and associated hybridization of conduction and f-electrons (c-f hybridization) are suppressed at high magnetic fields. From the three different transverse modes we find contrasting results; both the Γ 4 (B 2g ) and Γ 5 (E g ) symmetry modes C 66 and C 44 show elastic softening that is enhanced above 30 T, while the characteristic softening of the Γ 3 (B 1g ) symmetry mode (C 11 – C 12 )/2 is suppressed in high magnetic fields. These results underscore the presence of a hybridization-driven Γ 3 (B 1g ) lattice instability in URu 2 Si 2 . However, the results from this work cannot be explained by using existing crystalline electric field schemes applied to the quadrupolar susceptibility in a local 5f 2 configuration. Instead, we present an analysis based on a band Jahn-Teller effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Final remnant of binary black hole mergers: Multipolar analysis

Methods are presented to define and compute source multipoles of dynamical horizons in numerical relativity codes, extending previous work in the isolated and dynamical horizon formalisms to allow for horizons that are not axisymmetric. These methods are then applied to a binary black hole merger simulation, providing evidence that the final remnant is a Kerr black hole, both through the (spatially) gauge-invariant recovery of the geometry of the apparent horizon, and through a detailed extraction of quasinormal ringing modes directly from the strong-field region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗