Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Integrated Sachs-Wolfe map reconstruction in the presence of systematic errors

The decay of gravitational potentials in the presence of dark energy leads to an additional, late-time contribution to anisotropies in the cosmic microwave background (CMB) at large angular scales. The imprint of this so-called integrated Sachs-Wolfe (ISW) effect to the CMB angular power spectrum has been detected and studied in detail, but reconstructing its spatial contributions to the CMB map, which would offer the tantalizing possibility of separating the early- from the late-time contributions to CMB temperature fluctuations, is more challenging. Here, we study the technique for reconstructing the ISW map based on information from galaxy surveys and focus in particular on how its accuracy is impacted by the presence of photometric calibration errors in input galaxy maps, which were previously found to be a dominant contaminant for ISW signal estimation. We find that both including tomographic information from a single survey and using data from multiple, complementary galaxy surveys improve the reconstruction by mitigating the impact of spurious power contributions from calibration errors. A high-fidelity reconstruction further requires one to account for the contribution of calibration errors to the observed galaxy power spectrum in the model used to construct the ISW estimator. Here, we find that if the photometric calibration errors in galaxy surveys can be independently controlled at the level required to obtain unbiased dark energy constraints, then it is possible to reconstruct ISW maps with excellent accuracy using a combination of maps from two galaxy surveys with properties similar to Euclid and SPHEREx.

79 ASTRONOMY AND ASTROPHYSICS↗

Accuracy, resolution, and cost comparisons between small format and mapping cameras for environmental mapping

Successful aerial photography depends on aerial cameras providing acceptable photographs within cost restrictions of the job. For topographic mapping where ultimate accuracy is required only large format mapping cameras will suffice. For mapping environmental patterns of vegetation, soils, or water pollution, 9-inch cameras often exceed accuracy and cost requirements, and small formats may be better. In choosing the best camera for environmental mapping, relative capabilities and costs must be understood. This study compares resolution, photo interpretation potential, metric accuracy, and cost of 9-inch, 70mm, and 35mm cameras for obtaining simultaneous color and color infrared photography for environmental mapping purposes.

Clegg, R. H.↗

Lunar Geologic Mapping: A Preliminary Map of a Portion of the LQ-10 ("Marius") Quadrangle

Since the first lunar mapping program ended in the 1970s, new topographical, multispectral, elemental and albedo imaging datasets have become available (e.g., Clementine, Lunar Prospector, Galileo). Lunar science has also advanced within the intervening time period. A new systematic lunar geologic mapping effort endeavors to build on the success of earlier mapping programs by fully integrating the many disparate datasets using GIS software and bringing to bear the most current understanding of lunar geologic history. As part of this program, we report on a 1:2,500,000-scale preliminary map of a subset of Lunar Quadrangle 10 ("LQ-10" or the "Marius Quadrangle," see Figures 1 and 2), and discuss the first-order science results. By generating a geologic map of this region, we can constrain the stratigraphic and geologic relationships between features, revealing information about the Moon s chemical and thermal evolution.

Gregg, T. K. P.↗

Linear assignment maps for correlated system-environment states

Assignment maps are mathematical operators that describe initial system-environment states for open quantum systems. We re-examine the notion of assignments that account for correlations between the system and the environment and show that these maps can be made linear at the expense of giving up positivity or consistency of the map. We study the role of positivity and consistency of the map and show the effects of relaxing these. Finally, we establish a connection between the violation of the positivity of linear assignments and the no-broadcasting theorem.

97 MATHEMATICS AND COMPUTING↗

The Kinematic Navigation and Cartography Knapsack (KNaCK): Demonstrating SlLAM (Simultaneous Localization and Mapping) LiDAR as a Tool for Exploration and Mapping of Lunar Pits and Caves

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile LiDAR (Light Detection and Ranging) system. It can map its surroundings in 3 dimensions and localize itself in space. The project is exploring how LiDAR can advance terrain mapping and navigation at the lunar south pole. KNaCK is lead by Dr. Michael Zanetti of NASA MSFC’s Heliophysics and Planetary Science Branch. - KNaCK serves as - A test article for GPS denied mapping and navigation. - A test bed for SLAM (Simultaneous Localization and Mapping) algorithms. - A test bed for commercial LiDAR units. - A tool for terrestrial science.

LiDAR↗

Transport properties in nontwist area-preserving maps

Nontwist systems, common in the dynamical descriptions of fluids and plasmas, possess a shearless curve with a concomitant transport barrier that eliminates or reduces chaotic transport, even after its breakdown. In order to investigate the transport properties of nontwist systems, we analyze the barrier escape time and barrier transmissivity for the standard nontwist map, a paradigm of such systems. We interpret the sensitive dependence of these quantities upon map parameters by investigating chaotic orbit stickiness and the associated role played by the dominant crossing of stable and unstable manifolds.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification and mapping of riverbed sediment facies in the Columbia River through integration of field observations and numerical simulations

In the Hanford Reach of the Columbia River, a thin layer of recent alluvium overlies the sedimentary formations that comprise the unconfined groundwater aquifer. Experimental and modeling studies have demonstrated that this alluvial layer exerts significant control on the exchange of groundwater and surface water (hydrologic exchange flux), and is associated with elevated levels of biogeochemical activity. This layer is also observed to be strongly heterogeneous, and quantifying the spatial distribution of properties over the range of scales of interest is challenging. Facies are elements of a sediment classification scheme that groups complex geologic materials into a set of discrete classes according to distinguishing features. Facies classifications have been used as a framework for assigning heterogeneous material properties to grid cells of numerical models of flow and reactive transport in subsurface media. The usefulness of such an approach hinges on being able to relate facies to quantitative properties needed for flow and reactive transport modeling, and on being able to map facies over the domain of interest using readily available information. While aquifer facies have been used in various modeling contexts, application of this concept to riverbed sediments is relatively new. Here we describe an approach for categorizing and mapping recent alluvial (riverbed) sediments based on the integration of diverse observations with numerical simulations of river hydrodynamics. The facies have distinct distributions of sediment texture which correspond to variations in hydraulic properties, and therefore provide a useful framework for assigning heterogeneous properties in numerical simulations of hydrologic exchange flows and biogeochemical processes.

Hou, Zhangshuan↗

Mapping growth windows in quaternary perovskite oxide systems by hybrid molecular beam epitaxy

Requisite to growing stoichiometric perovskite thin films of the solid-solution A ' 1-x A x B O 3 by hybrid molecular beam epitaxy is understanding how the growth conditions interpolate between the end members A'B O 3 and AB O 3 , which can be grown in a self-regulated fashion, but under different conditions. Using the example of La 1-x Sr x VO 3 , the two-dimensional growth parameter space that is spanned by the flux of the metal-organic precursor vanadium oxytriisopropoxide and composition, x , was mapped out. The evolution of the adsorption-controlled growth window was obtained using a combination of X-ray diffraction, atomic force microscopy, reflection high-energy electron-diffraction (RHEED), and Rutherford backscattering spectroscopy. It is found that the stoichiometric growth conditions can be mapped out quickly with a single calibration sample using RHEED. Once stoichiometric conditions have been identified, the out-of-plane lattice parameter can be utilized to precisely determine the composition x . This strategy enables the identification of growth conditions that allow the deposition of stoichiometric perovskite oxide films with random A-site cation mixing, which is relevant to a large number of perovskite materials with interesting properties, e.g., high-temperature superconductivity and colossal magnetoresistance, that emerge in solid solution A ' 1-x A x B O 3 .

36 MATERIALS SCIENCE↗

Elemental and lattice-parameter mapping of binary oxide superlattices of (LaNiO 3 ) 4 /(LaMnO 3 ) 2 at atomic resolution

We construct the elemental distribution and lattice strain maps from the measured atomic column positions in a (LaNiO3)(4)/(LaMnO3)(2) superlattice over a large field of view. The correlation between the distribution of B-cations and the lattice parameter in the form of Vegard's law is validated using atomic resolution energy dispersive x-ray spectroscopy (EDS). The maps show negligible Mn intermixing in the LaNiO3 layer, while Ni intermixing in the LaMnO3 layer improves away from the substrate interface to 9.5 atomic% from the 8th period onwards, indicating that the superlattice interfacial sharpness is established as the distance from the substrate increases. The maps allow an observation of the compositional defects of the B-sites, which is not possible by Z-contrast alone. Thus, this study demonstrates a promising approach for atomic scale correlative study of lattice strain and composition, and a method for the calibration of atomic resolution EDS maps.

composition↗

Rapid model building of β-sheets in electron-density maps

A method for rapid model building of β-sheets at moderate resolution is presented. A method for rapidly building β-sheets into electron-density maps is presented. β-Strands are identified as tubes of high density adjacent to and nearly parallel to other tubes of density. The alignment and direction of each strand are identified from the pattern of high density corresponding to carbonyl and C{sup β} atoms along the strand averaged over all repeats present in the strand. The β-strands obtained are then assembled into a single atomic model of the β-sheet regions. The method was tested on a set of 42 experimental electron-density maps at resolutions ranging from 1.5 to 3.8 Å. The β-sheet regions were nearly completely built in all but two cases, the exceptions being one structure at 2.5 Å resolution in which a third of the residues in β-sheets were built and a structure at 3.8 Å in which under 10% were built. The overall average r.m.s.d. of main-chain atoms in the residues built using this method compared with refined models of the structures was 1.5 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid model building of α-helices in electron-density maps

A method for rapid model building of α-helices at moderate resolution is presented. A method for the identification of α-helices in electron-density maps at low resolution followed by interpretation at moderate to high resolution is presented. Rapid identification is achieved at low resolution, where α-helices appear as tubes of density. The positioning and direction of the α-helices is obtained at moderate to high resolution, where the positions of side chains can be seen. The method was tested on a set of 42 experimental electron-density maps at resolutions ranging from 1.5 to 3.8 Å. An average of 63% of the α-helical residues in these proteins were built and an average of 76% of the residues built matched helical residues in the refined models of the proteins. The overall average r.m.s.d. between main-chain atoms in the modeled α-helices and the nearest atom with the same name in the refined models of the proteins was 1.3 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling Cu Chemical Signature in CdTe by Spectral Fluorescence Mapping

X-ray absorption spectroscopy (XAS) has been shown to be a powerful tool to unravel the chemical environment of a given atom within a matrix. When used in correlative X-ray microscopy approaches, XAS allows one to probe with nanoscale precision regions of particular interest in an absorber. Herein, we use X-ray absorption near edge structure (XANES) to evaluate the chemical environment of Cu atoms within a CdTe solar cell. The reconstruction of XANES spectra from XRF maps have unfolded 2D maps of Cu chemical structures. In this work, we found that most Cu atoms exist in Cu 2 Te and Cu 1.4 Te phase. Moreover, we found traces of CuTe, Cu 2 O, CuO, Cu 2 S, CuS, and metallic Cu phase. Investigating Cu chemical structures at different performing areas, we found no observable correlation between Cu chemical structures and electrical performance. This approach allows tracking of Cu chemical structures along with electrical performance and elemental distribution simultaneously, with high spatial resolution in a statistically practical way.

CdTe↗

Medium amplitude parallel superposition (MAPS) rheology. Part 2: Experimental protocols and data analysis

An experimental protocol is developed to directly measure the new material functions revealed by medium amplitude parallel superposition (MAPS) rheology. This protocol measures the medium amplitude response of a material to a simple shear deformation composed of three sine waves at different frequencies, revealing a rich dataset consisting of up to 19 measurements of the third-order complex modulus at distinct three-frequency coordinates. We discuss how the choice of input frequencies influences the features of the MAPS domain studied by the experiment. A polynomial interpolation method for reducing the bias of measured values from spectral leakage and reducing variance due to noise is discussed, including a derivation of the optimal range of amplitudes for the input signal. This leads to the conclusion that conducting the experiment in a stress-controlled fashion possesses a distinct advantage to the strain-controlled mode. The experimental protocol is demonstrated through measurements of the MAPS response of a model complex fluid: a surfactant solution of wormlike micelles. The resulting dataset is indeed large and feature-rich, while still acquired in a time comparable to similar medium amplitude oscillatory shear (MAOS) experiments. We demonstrate that the data represent measurements of an intrinsic material function by studying its internal consistency, compatibility with low-frequency predictions for Coleman–Noll simple fluids, and agreement with data obtained via MAOS amplitude sweeps. Finally, the data are compared to predictions from the corotational Maxwell model to demonstrate the power of MAPS rheology in determining whether a constitutive model is consistent with a material’s time-dependent response.

Lennon, Kyle R. (ORCID:0000000212515461)↗

Holographic map for cosmological horizons

Here, we propose a holographic map between Einstein gravity coupled to matter in a de Sitter background and large N quantum mechanics of a system of spins. Holography maps a spin model with a finite-dimensional Hilbert space defined on a version of the stretched horizon into bulk gravitational dynamics. The full Hamiltonian of the spin model contains a nonlocal piece which generates chaotic dynamics, widely conjectured to be a necessary part of quantum gravity, and a local piece which recovers the perturbative spectrum in the bulk.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

COVID19 Disease Map, a computational knowledge repository of virus–host interaction mechanisms

We need to effectively combine the knowledge from surging literature with complex datasets to propose mechanistic models of SARS-CoV-2 infection, improving data interpretation and predicting key targets of intervention. Here, we describe a large-scale community effort to build an open access, interoperable and computable repository of COVID-19 molecular mechanisms. The COVID-19 Disease Map (C19DMap) is a graphical, interactive representation of disease-relevant molecular mechanisms linking many knowledge sources. Notably, it is a computational resource for graph-based analyses and disease modelling. To this end, we established a framework of tools, platforms and guidelines necessary for a multifaceted community of biocurators, domain experts, bioinformaticians and computational biologists. The diagrams of the C19DMap, curated from the literature, are integrated with relevant interaction and text mining databases. We demonstrate the application of network analysis and modelling approaches by concrete examples to highlight new testable hypotheses. This framework helps to find signatures of SARS-CoV-2 predisposition, treatment response or prioritisation of drug candidates. Such an approach may help deal with new waves of COVID-19 or similar pandemics in the long-term perspective.

59 BASIC BIOLOGICAL SCIENCES↗

TRACER-MAP: Mapping Aerosol Processes Across Houston During Convective Cell Events

The Houston, TX Metropolitan area was selected for the 2022 Tracking Aerosol Convection Interactions Experiment (TRACER) due to its high convective storm activity and broad range of polluted aerosol conditions. With the overall TRACER project in mind, we planned TRACER-MAP, a related investigation of the impacts of convective storms on atmospheric composition, chemistry and aerosol processing in Houston. Because the Houston metroplex is large and has a wide range of atmospheric conditions, this project has “MAP-ped” the air chemistry conditions across Houston while atmospheric scientists working in the TRACER project monitor convective storm activity overhead. Specifically, we conducted a series of aerosol, gas, and meteorological measurements in the summer of 2022 that matches measurements from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Mobile Facilities. The TRACER-MAP campaign extended from Jul 1 – Sept 3, 2022. TRACER-MAP included two urban sites: Aldine and University of Houston (UH); two industrial sites: San Jacinto Battleground and the main DOE TRACER site at the La Porte Municipal Airport (ARM/La Porte AMF); and one background site in WG Jones State Forest north of Houston.

54 ENVIRONMENTAL SCIENCES↗

Shadow of a colossus: A z = 2.44 galaxy protocluster detected in 3D Lyα forest tomographic mapping of the cosmos field

Using moderate-resolution optical spectra from 58 background Lyman-break galaxies and quasars at z∼2.3--3 within a 11.′5 × 13.′5 area of the COSMOS field (∼1200 deg{sup −2} projected area density or ∼2.4 h{sup −1} Mpc mean transverse separation), we reconstruct a 3D tomographic map of the foreground Lyα forest absorption at 2.2 < z < 2.5 with an effective smoothing scale of ϵ{sub 3D}≈2.5 h{sup −1} Mpc comoving. Comparing with 61 coeval galaxies with spectroscopic redshifts in the same volume, we find that the galaxy positions are clearly biased toward regions with enhanced intergalactic medium (IGM) absorption in the tomographic map. We find an extended IGM overdensity with deep absorption troughs at z = 2.45 associated with a recently discovered galaxy protocluster at the same redshift. Based on simulations matched to our data, we estimate the enclosed dark matter mass within this IGM overdensity to be M{sub dm}(z=2.45)=(1.1±0.6)×10{sup 14} h{sup −1}M{sub ⊙}, and argue based on this mass and absorption strength that it will form at least one z ∼ 0 galaxy cluster with M(z=0)=(3±1.5)×10{sup 14} h{sup −1}M{sub ⊙}, although its elongated nature suggests that it will likely collapse into two separate clusters. We also point out a compact overdensity of six MOSDEF galaxies at z = 2.30 within a r∼1 h{sup −1} Mpc radius and Δz ∼ 0.006, which does not appear to have a large associated IGM overdensity. These results demonstrate the potential of Lyα forest tomography on larger volumes to study galaxy properties as a function of environment, as well as revealing the large-scale IGM overdensities associated with protoclusters or other features of large-scale structure.

79 ASTRONOMY AND ASTROPHYSICS↗

Sloan Digital Sky Survey IV: Mapping the Milky Way, Nearby Galaxies, and the Distant Universe

We describe the Sloan Digital Sky Survey IV (SDSS-IV), a project encompassing three major spectroscopic programs. The Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2) is observing hundreds of thousands of Milky Way stars at high resolution and high signal-to-noise ratios in the near-infrared. The Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey is obtaining spatially resolved spectroscopy for thousands of nearby galaxies (median z∼0.03). The extended Baryon Oscillation Spectroscopic Survey (eBOSS) is mapping the galaxy, quasar, and neutral gas distributions between z∼0.6 and 3.5 to constrain cosmology using baryon acoustic oscillations, redshift space distortions, and the shape of the power spectrum. Within eBOSS, we are conducting two major subprograms: the SPectroscopic IDentification of eROSITA Sources (SPIDERS), investigating X-ray AGNs and galaxies in X-ray clusters, and the Time Domain Spectroscopic Survey (TDSS), obtaining spectra of variable sources. All programs use the 2.5 m Sloan Foundation Telescope at the Apache Point Observatory; observations there began in Summer 2014. APOGEE-2 also operates a second near-infrared spectrograph at the 2.5 m du Pont Telescope at Las Campanas Observatory, with observations beginning in early 2017. Observations at both facilities are scheduled to continue through 2020. In keeping with previous SDSS policy, SDSS-IV provides regularly scheduled public data releases; the first one, Data Release 13, was made available in 2016 July.

79 ASTRONOMY AND ASTROPHYSICS↗