Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The role of microstructural evolution during spark plasma sintering on the soft magnetic and electronic properties of a CoFe–Al2O3 soft magnetic composite

Abstract For transformers and inductors to meet the world’s growing demand for electrical power, more efficient soft magnetic materials with high saturation magnetic polarization and high electrical resistivity are needed. This work aimed at the development of a soft magnetic composite synthesized via spark plasma sintering with both high saturation magnetic polarization and high electrical resistivity for efficient soft magnetic cores. CoFe powder particles coated with an insulating layer of Al 2 O 3 were used as feedstock material to improve the electrical resistivity while retaining high saturation magnetic polarization. By maintaining a continuous non-magnetic Al 2 O 3 phase throughout the material, both a high saturation magnetic polarization, above 1.5 T, and high electrical resistivity, above 100 μΩ·m, were achieved. Through microstructural characterization of samples consolidated at various temperatures, the role of microstructural evolution on the magnetic and electronic properties of the composite was elucidated. Upon consolidation at relatively high temperature, the CoFe was to found plastically deform and flow into the Al 2 O 3 phase at the particle boundaries and this phenomenon was attributed to low resistivity in the composite. In contrast, at lower consolidation temperatures, perforation of the Al 2 O 3 phase was not observed and a high electrical resistivity was achieved, while maintaining a high magnetic polarization, ideal for more efficient soft magnetic materials for transformers and inductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cooperative response of magnetism and superconductivity in the magnetic superconductor RbEuFe 4 As 4

Herein, we present a study of the magnetic-flux evolution in the magnetic superconductor RbEuFe 4 As 4 performed using magneto-optical imaging and magnetization measurements during field cooling and warming and magnetic field cycling at temperatures above and below the magnetic transition point, T$_m$. The vortex patterns emerging at T ≲ T$_m$ reveal that the Eu-spin subsystem serves as an internal pump of the magnetic flux while the superconducting critical current controls the delivery of magnetic-flux quanta into the bulk. The interplay of magnetic susceptibility amplifying the magnetic induction and vortex pinning attenuating the magnetic-flux entry results in a field- and temperature-dependent critical state that emulates a paramagnetic Meissner effect. The observed vortex dynamics corresponds to a nontrivial spatial current distribution and yields a self-consistent inhomogeneous enhancement of the sample magnetization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laminated magnetic materials for on-chip magnetic inductors/transformers

A technique relates to a method of forming a laminated multilayer magnetic structure. An adhesion layer is deposited on a substrate. A magnetic seed layer is deposited on top of the adhesion layer. Magnetic layers and non-magnetic spacer layers are alternatingly deposited such that an even number of the magnetic layers is deposited while an odd number of the non-magnetic spacer layers is deposited. The odd number is one less than the even number. Every two of the magnetic layers is separated by one of the non-magnetic spacer layers. The first of the magnetic layers is deposited on the magnetic seed layer, and the magnetic layers each have a thickness less than 500 nanometers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laminated magnetic materials for on-chip magnetic inductors/transformers

A technique relates to a method of forming a laminated multilayer magnetic structure. An adhesion layer is deposited on a substrate. A magnetic seed layer is deposited on top of the adhesion layer. Magnetic layers and non-magnetic spacer layers are alternatingly deposited such that an even number of the magnetic layers is deposited while an odd number of the non-magnetic spacer layers is deposited. The odd number is one less than the even number. Every two of the magnetic layers is separated by one of the non-magnetic spacer layers. The first of the magnetic layers is deposited on the magnetic seed layer, and the magnetic layers each have a thickness less than 500 nanometers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Superconducting Magnet System Concept with a Mechanical Energy Transfer in the Magnetic Field

There is an interest to design superconducting magnet systems working in a persistent current mode. These systems continuously generate magnetic field with disconnected power source working like permanent magnet devices. In this paper proposed a magnet system concept based on the direct mechanical energy transfer in the magnetic field. Short circuited superconducting coils do not have current leads and power source. To pump the mechanical energy in the superconducting coil used a magnetizer which magnetically coupled with the coil. The mechanical removing the magnetizer from the magnet induces a persistent current in the superconducting coil which generates the magnetic field. Iron dominated magnet system concept was investigated using OPERA3d code which confirmed a visibility of proposed approach.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next-generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators that can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling, which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single-crystal (Mg 0.2 Ni 0.2 Fe 0.2 Co 0.2 Cu 0.2 )Fe 2 O 4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Furthermore, local and global magnetic measurements further demonstrate how strain can be used to manipulate the magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next-generation magnetic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High precision magnetic field measurement and mapping of the LEReC 180 degree bending magnet using very low field NMR with hall combined probe (140 - 350 gauss)

The Relativistic Heavy Ion Collider (RHIC) at BNL are using the Low Energy RHIC Electron Cooling (LEReC) to conduct experiments that search for the quantum chromodynamic (QCD) critical point. The first ever electron cooling based on the RF acceleration of electron beams was experimentally demonstrated on April 5, 2019 at LEReC at BNL. The first critical step in obtaining successful 3D non-magnetized cooling of the Au ion bunches in the RHIC cooling section was matching the electron beam energy with a relative error less than 5*10 -4 to the ion beam energy. Part of the LEReC beamline is a dipole magnet that bends the electron beam 180 degree. One of the most outstanding measurement challenges is that the dipole field is so low (≈200 G). Most of the existing NMR probes can only measure fields >400 G. Lower signal-to-noise ratio at low fields is requires the use of larger sample volumes. Working with CAYLAR, a NMR probe has been redesigned and optimized for these low field measurements with high resolution. We report the methods, challenges, and results for extensive magnetic field mappings of the 180 dipole magnet. A combination of NMR and Hall sensors has been successfully implemented to measure uniform field regimes inside the magnet center area and non-uniform field regimes at the magnet ends. Detailed measurement and mapping have been performed at five radii and five heights along the beam trajectory. Meanwhile a finite element magnetic modeling simulation of the magnet using Opera software has been performed. The calculated and measured data are compared, and the calculated data is good reference for measured data over long length mapping from magnet edge to center. The measured magnetic measurement data is directly useful for beam instrumentation, diagnostics and operation.

Magnetic Field Measurement↗
DOE OSTI2025

Dilute magnetic impurity-induced effective phonon magnetic moment in Fe-doped monolayer MoS 2

Realization of large effective phonon magnetic moment in monolayer MoS 2 has established an important route for exploring intriguing magnetic phenomena in a nonmagnetic material. The sizable coupling between the orbital transition and the circularly polarized phonon results in the large effective phonon magnetic moment. In this work, using magneto-Raman spectroscopy, we investigate substitutional doping of magnetic atoms as a tuning knob of the electronic and phononic properties of MoS 2 . We show that Fe-doping polarizes the spin of the conduction bands and introduces a localized Fe band underneath the conduction band. As a result, an additional orbital transition between the Mo 4d and Fe 3d states emerges, producing an orbital-phonon hybridized mode at 283 cm −1 . Our magnetic field dependent measurements demonstrate that this new mode carries 2.8 $\mu_{\mathrm{B}}$ effective phonon magnetic moment, which is comparable to that of the undoped MoS 2 . Moreover, even though a long-range magnetic order is absent in Fe-doped MoS 2 , the local magnetic moment of Fe modifies the nature of the spin fluctuation, producing monotonically increasing quasielastic scattering spectral weight as temperature decreases. Our results highlight two-dimensional dilute magnetic semiconductors synthesized by substitutional doping as a promising material platform to manipulate the phonon magnetic moment through orbital-phonon coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of atom substitutions on the magnetic properties in Ce 2 Fe 17 : Toward permanent magnet applications

Due to the rapidly developing technologies and huge market demand, there has been increasing interest internationally in exploring permanent magnet formulations in addition to the well-known Nd 2 Fe 14 B and SmCo 5 /Sm 2 Co 17 . Given Fe's low materials cost and generally high magnetization, Fe-rich rare earth binaries such as Ce 2 Fe 17 comprise a rich “hunting ground” for such new materials. While this compound suffers from a low ordering point and is a heli magnet, these difficulties are easily remedied by the substitution of appropriate amounts of cobalt for Fe, with room-temperature saturation magnetization as high as 1.5 T. In this work, we try to switch the all-important magnetic anisotropy from planar to uniaxial behavior in Ce 2 Fe 17 via 18 h - and 6 c -type atom substitutions with Si, Ir, and numerous other atoms. The uniaxial magnetocrystalline anisotropy is successfully achieved in the 6 c -site-substituted Ce 2 Fe 15 Ir 2 systems, along with large magnetization. We find that iridium substitution, in particular, induces a substantial uniaxial anisotropy of 11.25 MJ/m 3 , which is comparable to most of the current rare earth permanent magnets. Although the iridium substitution is costly, the finding of Ir-triggered uniaxial magnetic anisotropy indicates the potential of Ce–Fe-based alloys for permanent magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multi-$\mathcal{k}$ magnetic structure and large anomalous Hall effect in candidate magnetic Weyl semimetal NdAlGe

Here, the magnetic structure, magnetoresistance (MR), and Hall effect of the noncentrosymmetric magnetic semimetal NdAlGe are investigated, revealing an unusual magnetic state and anomalous transport properties that are associated with the electronic structure of this compound. The magnetization and MR measurements are both highly anisotropic and indicate an Ising-like magnetic system. The magnetic structure is complex in that it involves two magnetic ordering vectors, including an incommensurate spin density wave and commensurate ferrimagnetic state in zero field. We have discovered a large anomalous Hall conductivity that reaches ≈430 Ω –1 cm –1 , implying that it originates from an intrinsic Berry curvature effect stemming from Weyl nodes found in the electronic structure. These electronic structure calculations indicate the presence of nested Fermi surface pockets with nesting wave vectors like the measured magnetic ordering wave vector and the presence of Weyl nodes in proximity to the Fermi surface. We associate the incommensurate magnetic structure with the large anomalous Hall response to be the result of the combination of Fermi surface nesting and the Berry curvature associated with Weyl nodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Milli-magnetic monopole dark matter and the survival of galactic magnetic fields

A bstract Dark sectors with Abelian gauge symmetries can interact with ordinary matter via kinetic mixing. In such scenarios, magnetic monopoles of a broken dark U(1) will appear in our sector as confined milli-magnetically charged objects under ordinary electromagnetism. Halo ellipticity constraints are shown to significantly bound the strength of dark magnetic Coulomb monopole interactions. The bound magnetic monopole ground state, which in vacuum is stable and has no magnetic charge or moment, is shown to become quantum mechanically unstable in the presence of an external, ordinary magnetic field. If these states contribute sizably to the local dark matter density, they extract significant energy from the galactic magnetic field. We revise and extend this “Parker Bound” on galactic magnetic energy loss to milli-magnetic monopoles which leads to the strongest existing constraints on these states, satisfying our halo ellipticity bounds, over a wide range of magnetic monopole masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The 3D magnetic topology and plasma dynamics in open stochastic magnetic field lines

We report the thermal quench triggered by locked modes is known to be mainly due to open stochastic magnetic field lines connected to the wall boundary. It is essential to understand the 3D structure of open stochastic field lines since it determines the overall plasma dynamics in the system. In this study, we analyze the 3D magnetic topology for two key concepts, the connection length L c and the effective magnetic mirror ratio M eff , and present a comprehensive picture of electron and ion dynamics related to the magnetic topology. The connection length determines the 3D structure of the ambipolar potential, and a sharp potential drop across distinct L c regions induces the E × B transport and mixing across the field line. The confinement of electrons and ions along the field line is determined by the ambipolar potential and [Formula: see text] configuration. Electron and ion temperatures in magnetic hills (M eff < 1) are lower than in magnetic wells (M eff > 1) because particles in magnetic hills are more likely to escape toward the wall boundary along the field line. The mixing between the magnetic wells and hills by E × B and magnetic drift motions results in collisionless detrapping of electrons and ions, which reduces their temperature efficiently. Numerical simulations of two different magnetic configurations demonstrate the importance of the collisionless detrapping mechanism, which could be the main cause of plasma temperature drop during the thermal quench.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Two distinctive regimes in the charge transport of a magnetic topological ultra thin film

Abstract The effect of the magnetic impurities on the charge transport in a magnetic topological ultra-thin film (MTF) is analytically investigated by applying the semi-classical Boltzmann framework through a modified relaxation-time approximation. Our results for the relaxation time of electrons as well as the charge conductivity of the system exhibit two distinct regimes of transport. We show that the generated charge current in a MTF is always dissipative and anisotropic when both conduction bands are involved in the charge transport. The magnetic impurities induce a chirality selection rule for the transitions of electrons which can be altered by changing the orientation of the magnetic impurities. On the other hand, when a single conduction band participates in the charge transport, the resistivity is isotropic and can be entirely suppressed due to the corresponding chirality selection rule. Our findings propose a method to determine an onset thickness at which a crossover from a three-dimensional magnetic topological insulator to a (two-dimensional) MTF occurs.

Sabzalipour, Amir (ORCID:0000000195830880)↗
DOE OSTI2021

Challenges in Postprocessing of Hybrid Manufacturing of Magnet Polymer Composites to Enhance the Energy Product of NdFeB Bonded Magnets

Bonded permanent magnets need to process magnetic filler particles and binder together which is a form of hybrid or composite manufacturing that needs to simultaneously process multimaterials. Polymer bonding of the permanent magnets decreases the energy product of the bonded magnets which varies with square of loading fraction of magnetic materials. However, due to high viscosity of bonding polymer prohibits loading higher than 80 volume % of magnetic materials in most efficient loading process such as compression molding. To further increase the loading of magnetic fraction in the bonded permanent magnets, it is expected to be beneficial to introduce a fraction of nonreacting thermally sacrificial polymer along with permanent bonding polymer in the least permissible of about 20 volume % of the polymer. This process of first adding the sacrificial polymer for higher processability for composites and later removing it via post processing such as heat treatment provides a simple example of inclusion of both the additive and the subtractive stages of hybrid manufacturing. These hybrid composite magnets can be heat treated to remove the sacrificial polymer to further increase the density and energy product which might require to implement hot isostatic pressing for compaction. Although the identification of such ideal polymer requires an extensive polymer chemistry research, we have compression molded several permanent bonding polymers such as nylon, polycarbonate (PC) and polyphenyl sulfide (PPS) and potential sacrificial polymer such as polyoxymethylene (POM), polystyrene (PS), and Acrylonitrile Butadiene Styrene (ABS) and heat treated to remove the sacrificial polymers. It is discovered that oxygen free low temperature pyrolizable polymers could be the potential candidates for increasing the magnet particles loading for achieving high energy products.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Remanent magnetization model for the broken ridge satellite magnetic anomaly

A crustal model for the interpretation of the Broken Ridge satellite magnetic anomaly was constructed from bathymetric data assuming an Airy-type isostatic compensation. An average crustal magnetization of 6 A.m is required to account for the observed anomaly amplitudes provided that the whole crust is homogeneously magnetized. In contrast, a model representing only the topographic expression of the Broken Ridge, above the surrounding sea floor, requires a magnetization of the order of 40 A.m-1. Since this latter figure is much higher than is to be expected from studies of magnetic properties of oceanic rocks, it is concluded that the majority of the crustal volume of Broken Ridge is magnetized relatively uniformly. The direction of the source magnetization is consistent with an inclination shallower than the present geomagnetic field and close to that of an axial dipole. Since a more northerly source location for Broken Ridge is contrary to the paleolatitude data it is though that the magnetization represents a magnetization obtained by averaging the geomagnetic field direction over a sufficient time to remove secular variation effects. This pattern is indicative of viscous magnetization.

Johnson, B. D.↗
NASA NTRS1993

Rock magnetic properties of the Arunta Block, Central Australia, and their implication for the interpretation of long-wavelength magnetic anomalies

Rock magnetic and petrologic studies of a suite of deep crustal rocks from the Arunta Block of Central Australia reveal that the granulite grade rocks are in general much more magnetic than the amphibolite grade samples irrespective of bulk rock composition. The dominant magnetic mineral in all samples is relatively pure magnetite as determined from thermomagnetic and electron microprobe analysis. The bulk magnetic properties are typical of pseudosingle-domain to multidomain size material. The samples from our study have very large remanences compared to previous crustal magnetic studies, with the granulites having a median natural remanent magnetization of 4.1 A/m and Koenigsberger ratio of 7.2. These remanences are relatively resistant to the thermal demagnetization, with nearly 50 percent of the magnetization remaining after 400 C demagnetization. Thus remanence may contribute significantly to the observed magnetic anomalies, including long-wavelength magnetic anomalies, the source of which resides at depth and therefore at elevated temperature, where a thermoviscous remanant magnetization along the present-day field is likely to dominate.

Kelso, Paul R.↗