Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Size Effects on Gamma Radiation Response of Magnetic Properties of Barium Hexaferrite Powders

Little is currently known about the effects of gamma-ray irradiation on oxide magnet materials. In particular, the effect of particle size on radiation susceptibility was investigated. Two commercial powders of BaFe12O19 were thoroughly characterized, then exposed to 1 MGy of gamma radiation from a 60Co source. AC susceptibility and DC magnetometry and Mössbauer spectroscopy were performed after irradiation and compared to pre-irradiated measurements. DC magnetization and AC susceptibility decreased for both samples with the relative change of DC magnetization being larger for the micrometer-sized particles and the relative change of the AC susceptibility being larger for the nanometer-sized particles. Mössbauer spectroscopy indicated a decrease in both the hyperfine fieldsand in the distribution of hyperfine fields for each Fe site, particularly in the larger particle sample. Decreases in susceptibility are believed to be due to recrystallization of the particles and redistribution of an amorphous component, in the bulk or on the surface, and consequent reduction in the particle magnetic moment. This radiation damage mechanism is different than that seen in previous studies of neutron and heavy ion irradiation of BaFe12O19.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The structural and magnetic properties of Pr{sub 1−x}Er{sub x}Al{sub 2}

We report on the effect of Er addition to PrAl{sub 2} on the lattice parameters, magnetic behavior, heat capacity, and magnetocaloric effect by using x-ray diffraction, magnetization, and heat capacity measurements. Unlike Pr{sub 0.6}Er{sub 0.4}Al{sub 2}, other alloys we studied in the pseudobinary (Pr{sub 1−x}Er{sub x})Al{sub 2} system do not exhibit a sharp peak in heat capacity with the application of magnetic field. Both the cubic lattice parameter and the Curie temperature decrease with increasing Er concentration. The nuclear specific heat coefficient decreases from 660 mJ K mol{sup −1} for x = 0.05 to a nearly negligible value for x = 0.95. The magnetic entropy and adiabatic temperature change varies from 2 to 4 J mol{sup −1} K{sup −1} and 2.5 to 5 K at ΔH = 20 kOe for x = 0.05 to 0.95, respectively. These values of the magnetocaloric effect are comparable to those of the other rare-earth dialuminides systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cubic phase stability, optical and magnetic properties of Cu-stabilized zirconia nanocrystals

By means of experimental and ab initio investigations, in this article we report on the cubic phase stability of Cu doped zirconia (ZrO 2 ) at room temperature, and further characterize its structural, optical and magnetic properties. Various compositions of Zr 1– x Cu x O 2 (0.01 ≤ x ≤ 0.25) nanocrystallites of average size ~16 nm were synthesized using co-precipitation technique. Thermal analysis and kinetics of crystallization revealed that the cubic phase at ambient temperature can be stabilized by using a critical calcination temperature of 500 °C for 8 h in air and a critical composition of $x_c$ = 0.10 ± 0.05. For $x < x_c$, some undigested monoclinic phase of ZrO 2 exists together with the cubic structure. However, for $x > x_c$, the monoclinic CuO emerges as a secondary phase with shrinkage of unit-cell volume with increasing the Cu content. At x = 0.05 and 500 °C calcination temperature, we observe a high degree of cubic crystallinity which breaks down into monoclinic phase with increasing calcination temperature beyond 550 °C. Electron magnetic resonance studies provide evidence for the substitution of Cu 2+ ( 2 D 5/9 ,3d 9 ) ions at Zr 4+ sites with g ∥ = 2.250, g ⊥ = 2.018 and average g a = (g ∥ + 2g ⊥ )/3 ~ 2.1. The temperature dependence of magnetic susceptibility measurements from 2 K to 300 K exhibits Curie–Weiss behaviour whose analysis using g a = 2.1 and spin S = 1/2 yields x = 0.028 and x = 0.068 for the nominal x = 0.05 and x = 0.20 samples, respectively. This magnetic analysis confirms the findings from x-ray diffraction that only a part of Cu is successfully doped into cubic phase of Cu-doped ZrO 2 . The optical bandgap decreases with increasing x, which is due to the emergence of Cu-d states at Fermi-level near the valence bands, thus making Cu-doped zirconia a hole doped (p-type) semiconductor.

electron spin resonance↗

Magnetic property of transition metal-Si atomic line on silicon Σ3 grain boundary: A theoretical study

Using first-principles calculations within density functional theory, we investigate the electronic and magnetic properties of different 3d transition metal-Si atomic lines on silicon Σ3 (112) grain boundary, which can be formed through grain boundary segregation. We find that (i) Fe atoms occupy the substitutional sites at the grain boundary and form an Fe-Si atomic line, but the interaction between the Fe atoms is antiferromagnetic. (ii) The ferromagnetic stability increases with the atomic number of the transition metals and Co-Si atomic line is more stable in the ferromagnetic phase and shows a semimetallic behavior. We suggest that this special TM-Si atomic line formed by thermodynamically favorable transition metal segregation on Si grain boundary could be used in design of spin-dependent quantum devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of Co{sub 2−x}TM{sub x}C and Co{sub 3−x}TM{sub x}C nanoparticles

Using synthetic chemical approaches, it is now possible to synthesize transition metal carbides nanoparticles with morphology, where the transition metal layers are embedded with intervening layers of carbon atoms. A composite material consisting of Co{sub 2}C and Co{sub 3}C nanoparticles has been found to exhibit unusually large coercivity and energy product. Here, we demonstrate that the magnetic moments and the anisotropy can be further enhanced by using a combination of Co and other transition metals (TM). Our studies are based on mixed nanoparticles Co{sub 2−x}TM{sub x}C and Co{sub 3−x}TM{sub x}C, in which selected Co sites are replaced with 3d transition elements Cr, Mn, and Fe. The studies indicate that the replacement of Co by Fe results in an increase of both the magnetic moment and the magnetic anisotropy. In particular, CoFe{sub 2}C is shown to have an average spin moment of 2.56 μ{sub B} and a magnetic anisotropy of 0.353 meV/formula unit compared to 1.67 μ{sub B} and 0.206 meV/formula unit for the Co{sub 3}C. Detailed examination of the electronic structure shows that the limited hybridization of carbon p-states with transition metal d-states drives the larger anisotropy.

36 MATERIALS SCIENCE↗

Microstructure and magnetic properties of (001) textured L1(0) FePt films on amorphous glass substrate

L1(0) FePt thin films with an island-like morphology and magnetic perpendicular anisotropy were grown at low temperature (300 < T-dep< 375 degrees C) by magnetron sputtering on Hoya glass substrates using a 30-nm thick Cr (2 0 0) underlayer. An MgO buffer layer with a thickness of 2 nm was used to inhibit the diffusion from the Cr underlayer and promote the growth of (0 0 1) oriented L1(0) FePt films by inducing an in-plane lattice distortion. By varying the substrate temperature and the Ar sputter pressure (3.5 < P-Ar< 15 mTorr) during the deposition, the degree of chemical order, the microstructure and the magnetic properties were tuned and the best properties in term of squareness ratio (M-r/M-s similar to 0.95) and coercive field (H-c similar to 14 kOe) were observed for films deposited at T-dep = 350 degrees C and P-Ar= 5 mTorr, due to the appearance of a tensile strain, which favors the perpendicular anisotropy. The analysis of the angular dependence of remanent magnetization curves on the optimized sample suggests that the magnetization reversal is highly incoherent due to the inter-island interactions. Our results provide useful information on the low temperature growth of FePt films with perpendicular anisotropy onto glass substrates, which are relevant for a variety of technological applications, such as magnetic recording and spintronic devices. (C) 2015 Elsevier B.V. All rights reserved.

Speliotis, T↗

Influence of hydrogen patterning gas on electric and magnetic properties of perpendicular magnetic tunnel junctions

To identify the degradation mechanism in magnetic tunnel junctions (MTJs) using hydrogen, the properties of the MTJs were measured by applying an additional hydrogen etch process and a hydrogen plasma process to the patterned MTJs. In these studies, an additional 50 s hydrogen etch process caused the magnetoresistance (MR) to decrease from 103% to 14.7% and the resistance (R) to increase from 6.5 kΩ to 39 kΩ. Moreover, an additional 500 s hydrogen plasma process decreased the MR from 103% to 74% and increased R from 6.5 kΩ to 13.9 kΩ. These results show that MTJs can be damaged by the hydrogen plasma process as well as by the hydrogen etch process, as the atomic bonds in MgO may break and react with the exposed hydrogen gas. Compounds such as MgO hydrate very easily. We also calculated the damaged layer width (DLW) of the patterned MTJs after the hydrogen etching and plasma processes, to evaluate the downscaling limitations of spin-transfer-torque magnetic random-access memory (STT-MRAM) devices. With these calculations, the maximum DLWs at each side of the MTJ, generated by the etching and plasma processes, were 23.8 nm and 12.8 nm, respectively. This result validates that the hydrogen-based MTJ patterning processes cannot be used exclusively in STT-MRAMs beyond 20 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effects of post-growth annealing on the structural and magnetic properties of BaFe 2 As 2

Here, we investigate the effects of post-growth annealing on the structural and magnetic properties of BaFe 2 As 2 . Magnetic susceptibility measurements, which exhibit a signal corresponding to the magnetic phase transition, and high-resolution x-ray diffraction measurements, which directly probe the structural order parameter, show that annealing causes the ordering temperatures of both the phase transitions to increase, sharpen and converge. In the as grown sample, our measurements show two distinct transitions corresponding to structural and magnetic ordering, which are separated in temperature by approximately 1 K. After 46 days (d) of annealing at 700 °C, the two become concurrent in temperature. These measurements demonstrate that the structural phase transition is second-order like when the magnetic and structural phase transitions are separated in temperature, and first-order like when the two phase transition temperatures coincide. This observation indicates that annealing causes the system to cross a hitherto undiscovered tricritical point. In addition, x-ray diffraction measurements show that the c-axis lattice parameter increases with annealing up to 30 d, but remains constant for longer annealing times. Comparisons of BaFe 2 As 2 to SrFe 2 As 2 are made when possible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exquisite growth control and magnetic properties of yttrium iron garnet thin films

A layer-by-layer epitaxial growth up to 227 atomic layers of ferrimagnetic insulator yttrium iron garnet (YIG) thin films is achieved on (110)-oriented gadolinium gallium garnet substrates using pulsed laser deposition. Atomically smooth terraces are observed on YIG films up to 100 nm in thickness. The root-mean-square roughness is as low as 0.067 nm. The easy-axis lies in the film plane, indicating the dominance of shape anisotropy. For (110)-YIG films, there is well-defined two-fold in-plane anisotropy, with the easiest axis directed along [001]. The Gilbert damping constant is determined to be 1.0 × 10{sup −4} for 100 nm thick films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlled synthesis of Eu{sup 2+} and Eu{sup 3+} doped ZnS quantum dots and their photovoltaic and magnetic properties

Eu-doped ZnS quantum dots (QDs) have been synthesized by wet-chemical method and found to form in zinc blende (cubic) structure. Both Eu{sup 2+} and Eu{sup 3+} doped ZnS can be controllably synthesized. The Eu{sup 2+} doped ZnS QDs show broad photoluminescence emission peak around 512 nm, which is from the Eu{sup 2+} intra-ion transition of 4f{sup 6}d{sup 1} – 4f{sup 7}, while the Eu{sup 3+} doped samples exhibit narrow emission lines characteristic of transitions between the 4f levels. The investigation of the magnetic properties shows that the Eu{sup 3+} doped samples exhibit signs of ferromagnetism, on the other hand, Eu{sup 2+} doped samples are paramagnetic of Curie-Weiss type. The incident photon to electron conversion efficiency is increased with the Eu doping, which suggests the QD solar cell efficiency can be enhanced by Eu doping due to widened absorption windows. This is an attractive approach to utilize benign and environmentally friendly wide band gap ZnS QDs in solar cell technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties and Nature of Magnetic State of Intercalated Cr{sub x}MoSe{sub 2} Compounds

This is a pioneering work on the synthesis of molybdenum diselenides intercalated by chromium atoms. Their magnetic properties are studied at various intercalant concentrations, temperatures, and magnetic fields. The temperature dependences of effective magnetic moments and positive paramagnetic Curie temperatures in the paramagnetic region evidence the feasible ferromagnetic interactions between intercalated atoms. The existence of low-temperature ferromagnetic state in Cr{sub x}МоSe{sub 2} is confirmed by hysteresis phenomena in temperature and field dependences of magnetization and magnetic susceptibility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio GGA+U investigations of the structural, electronic, and magnetic properties of Cd 1-x Mn x Te alloy

The structural, electronic and magnetic properties of Cd 1-x Mn x Te alloy in the zinc-blende (ZB) phase within the framework of spin-polarized density functional theory using the generalized gradient approximation (GGA) are studied. In particular, we employ GGA+U SIC method that gives a better description of systems with strong Coulomb correlations of the d-electrons. First, we discuss implementation of GGA+U method to the ground state calculations of pure CdTe and ferromagnetic MnTe. The alloy is modelled at some selected compositions by ordered structures described in terms of periodically repeated supercells for the compositions x = 0.25, 0.5, and 0.75. The compositional dependence of the lattice constant, electronic band structure and partial densities of states of ferromagnetic Cd 1-x Mn x Te alloy are studied. We estimate the spin-exchange splitting energies produced by the Mn 3d-states and determine the exchange constants for the conduction and valence bands of the alloy. The energy positions of the occupied and unoccupied Mn 3d-bands in the electronic structure of ferromagnetic Cd 1-x Mn x Te alloy are also presented. Our calculations using GGA+U SIC approach agree well with the available experimental data and other calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First principles calculations of electronic structure and magnetic properties of Cr-based magnetic semiconductors Al{sub 1-x}Cr{sub x}X (X=N, P, As, Sb)

First principles calculations based on the density functional theory (DFT) within the local spin density approximation are performed to investigate the electronic structure and magnetic properties of Cr-based zinc blende diluted magnetic semiconductors Al{sub 1-x}Cr{sub x}X (X=N, P, As, Sb) for 0<=x<=0.50.The behaviour of magnetic moment of Al{sub 1-x}Cr{sub x}X at each Cr site as well as the change in the band gap value due to spin down electrons has been studied by increasing the concentration of Cr atom and through changing X from N to Sb. Furthermore, the role of p-d hybridization is analyzed in the electronic band structure and exchange splitting of d-dominated bands. The interaction strength is stronger in Al{sub 1-x}Cr{sub x}N and becomes weaker in Al{sub 1-x}Cr{sub x}Sb. The band gap due to the spin down electrons decreases with the increased concentration of Cr in Al{sub 1-x}Cr{sub x}X, and as one moves down along the isoelectronic series in the group V from N to Sb. Our calculations also verify the half-metallic ferromagnetic character in Cr doped AlX. - Graphical abstract: The prototype structures of Cr doped AlX (X=N, P, As, Sb) compounds: (A) zinc blende AlP for x=0, (B) Cr{sub 1}Al{sub 7}P{sub 8} for x=0.125, (C) Cr{sub 1}Al{sub 3}P{sub 4} for x=0.25, (D) Cr{sub 1}Al{sub 1}P{sub 2} for x=0.5.

36 MATERIALS SCIENCE↗

Oxide shell reduction and magnetic property changes in core-shell Fe nanoclusters under ion irradiation

Ion irradiation effects are studied on the Fe-based core-shell nanocluster (NC) films with core as Fe and shell as Fe{sub 3}O{sub 4}/Fe{sub 3}N. These NC films were deposited on Si substrates to thickness of ∼0.5 μm using a NC deposition system. The films were irradiated at room temperature with 5.5 MeV Si{sup 2+} ions to ion fluences of 10{sup 15} and 10{sup 16} ions/cm{sup 2}. It is found that the irradiation induces grain growth, Fe valence reduction in the shell, and crystallization or growth of Fe{sub 3}N. The film retained its Fe-core and its ferromagnetic properties after irradiation. The nature and mechanism of oxide shell reduction and composition dependence after irradiation were studied by synthesizing additional NC films of Fe{sub 3}O{sub 4} and FeO + Fe{sub 3}N and irradiating them under the same conditions. The presence of nanocrystalline Fe is found to be a major factor for the oxide shell reduction. The surface morphologies of these films show dramatic changes in the microstructures due to cluster growth and agglomeration as a result of ion irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗