SEARCH · Engineering Papers

Results for “Locking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Implementing an electronic sideband offset lock for isotope shift spectroscopy in radium

We demonstrate laser frequency stabilization with at least 6 GHz of offset tunability using an in-phase/quadrature (IQ) modulator to generate electronic sidebands (ESB) on a titanium sapphire laser at 714 nm and we apply this technique to perform isotope shift spectroscopy of 226 Ra and 225 Ra. By locking the laser to a single resonance of a high finesse optical cavity and adjusting the lock offset, we determine the frequency difference between the magneto-optical trap (MOT) transitions in the two isotopes to be 2630.0 ± 0.3 MHz, a factor of 29 more precise than the previously available data. Using the known value of the hyperfine splitting of the 3 P 1 level, we calculate the isotope shift for the 1 S 0 to 3 P 1 transition to be 2267.0 ± 2.2 MHz, a factor of 8 more precise than the best available value. Our technique could be applied to countless other atomic systems to provide unprecedented precision in isotope shift spectroscopy and other relative frequency comparisons.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Dual-wavelength channel GHz repetition rate mode-locked VECSEL cavities sourced from a common gain medium

Mode-locked vertical external cavity semiconductor lasers are a unique class of nonlinear dynamical systems driven far from equilibrium. We present a novel, to the best of our knowledge, experimental result, supported by rigorous microscopic simulations, of two coexisting mode-locked V-cavity configurations sourced by a common gain medium and operating as independent channels at angle controlled separated wavelengths. Microscopic simulations support pulses coincident on the common gain chip extracting photons from a nearby pair of coexisting kinetic holes burned in the carrier distributions.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Integrated dispersion compensated mode-locked quantum dot laser

Quantum dot lasers are excellent on-chip light sources, offering high defect tolerance, low threshold, low temperature variation, and high feedback insensitivity. Yet a monolithic integration technique combining epitaxial quantum dot lasers with passive waveguides has not been demonstrated and is needed for complex photonic integrated circuits. We present here, for the first time to our knowledge, a monolithc offset quantum dot integration platform that permits formation of a laser cavity utilizing both the robust quantum dot active region and the versatility of passive GaAs waveguide structures. This platform is substrate agnostic and therefore compatible with the quantum dot lasers directly grown on Si. As an illustration of the potential of this platform, we designed and fabricated a 20 GHz mode-locked laser with a dispersion-engineered on-chip waveguide mirror. Due to the dispersion compensation effect of the waveguide mirror, the pulse width of the mode-locked laser is reduced by a factor of 2.8.

Zhang, Zeyu (ORCID:0000000271576272)↗

DOE OSTI2023

Synchronization and phase locking of resonant magnet power supplies for Mu2e experiment at Fermilab

The Mu2e Experiment has stringent beam structure requirements; namely, it requires short (~200 ns) proton bunches separated by 1.5-2.0 $\mu$s. This beam structure will be produced using the Fermilab 8 GeV Booster, the 8 GeV Recycler Ring, and the Delivery Ring, which was formerly part of the antiproton accumulator system. Out of time beam is limited to a fraction of level of no more than $1\times 10^{-10}$, a requirement known as "extinction". Achieving this level of extinction requires a system of resonant magnets and collimators, phased such that only in time particles will pass through. The Mu2e magnet system involves two components: a 300 kHz component, timed such that the 600 kHz beam will pass through the collimators at the nodes, and a 4.5 MHz system to reduce the slewing of the in-time beam. These two systems must be precisely phase locked to the bunch rate coming from the Delivery Ring, which itself must be phased to match beam transfers coming from the Recycler. This poster describes the control system for the magnets, which is based on an Intel Arria FPGA, which handles phase locking of the magnets to the Delivery Ring, including the phase jumps required to match transfers from the Recycler.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

CRADA Number NFE-20-08292 with Quantum Lock Technologies LLC (CRADA Final Report)

At Quantum Lock Technologies, our mission is to use future-proof hardware and software to bridge the gap between physical access control and cyber security. Physical security includes access to doors, lockboxes/containers, and machinery/robots. Connecting physical access control to the cloud allows for remote detection, fast ledger updates, and mobile or remote access. However, this also opens physical security up to the world of cyber-attacks. At Quantum Lock, we use quantum random number generation to generate completely random and unpredictable digital keys to be used by connected equipment in a facility. This quantum technology is then paired with end-to-end encryption and a one-time-key communication protocol to ensure the highest level of security. Through the Innovation Crossroads program at Oak Ridge National Laboratory, we have developed benchtop prototypes of our technology, connected with utility boards as our first target customers, and prepared for our first pilot with customers (target end of summer 2022).

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Quantum Lock Technologies: Innovation Crossroads Final Report

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2023

Quantum Lock Technologies: Innovation Crossroads Final CRADA Report

42 ENGINEERING↗

DOE OSTI2021

A Memory Efficient Lock-Free Circular Queue

Hardware queues are import in many applications, such as data transfer, synchronization of concurrent modules with the need of mutual exclusion constructs. State of the art bounded (of a fixed size) lock free circular queues are implemented either by read/write atomic operations, or barrier conditions, or by separating dequeue and enqueue operations. However, these queues always require an unused element at all the times to safe-guard the front and rear pointers of the queue, so as to avoid data race conditions, which leads to the waste of memory. The waste of memory is especially disadvantageous in applications such as I/O data transfer, and image transfer between processing filters, when large element size is needed, We propose a lock-free solution of the bounded circular queue through read/write atomic operations, but without the need of an extra element in the queue. The proposed solution is implemented and verified in both Verilog and ’C’ languages. We also demonstrate its effectiveness by comparing its area and delay metrics with the implementations of other existing designs of queue.

Miniskar, Narasinga Rao↗

DOE OSTI2020

Dynamic instructions for Lock-out Tag-out

Lock-out tag-out (LOTO) instructions protect personnel from un-expected re-energization or start-up of equipment that is under maintenance. Even though there is rigorous training associated with LOTO activities, inci-dents still occur. Idaho National Laboratory is researching and developing dynamic LOTO instructions, which supports automatic place keeping, per-sonnel working on multiple instructions, and multiple work groups complet-ing the same instructions. Researchers identified user needs through subject matter expert interviews, observations, and classroom training. Failing to identify potential hazards during LOTO can cause injury or death to person-nel. Dynamic instructions can provide planning, incorporate supplemental documentation into the instruction, and improve instruction compliance. Combining these functions may lead to clearer, more applicable instructions which addresses the reason for compliance issues with current paper-based procedures.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2022

High-Performance Non-fullerene organic solar cells enabled by noncovalent Conformational locks and Side-Chain engineering

Three novel small molecular acceptors (SMAs) BO-2F, BO-C8-2F and BO-C2C6-C8-2F were designed and synthesized. These acceptors all possess planar molecular backbone because of the introduction of intramolecular noncovalent interaction. Among them, BO-C2C6-C8-2F with four side chains, which has the highest solubility, can form more appropriate nanomorphology when blending with PBDB-T. Hence, organic solar cells (OSCs) based on PBDB-T:BO-C2C6-C8-2F displayed an outstanding power convesion efficiency (PCE) of 14.25%, which is higher than BO-2F and BO-C8-2F based ones. To the best of our knowledge, the PCE of 14.25% is one of the highest for the OSCs based on A-π-D-π-A type SMAs. Finally, our results have demonstrated that the combination of side-chain engineering and intramolecular conformation lock has a great prospect in the design of high performance SMAs for OSCs.

14 SOLAR ENERGY↗

DOE OSTI2021

Galerkin formulations of isogeometric shell analysis: Alleviating locking with Greville quadratures and higher-order elements

Here we propose new quadrature schemes that asymptotically require only four in-plane points for Reissner–Mindlin shell elements and nine in-plane points for Kirchhoff–Love shell elements in B-spline and NURBS-based isogeometric shell analysis, independent of the polynomial degree p of the elements. The quadrature points are Greville abscissae associated with pth-order B-spline basis functions whose continuities depend on the specific Galerkin formulations, and the quadrature weights are calculated by solving a linear moment fitting problem in each parametric direction. The proposed shell element formulations are shown through numerical studies to be rank sufficient and to be free of spurious modes. The studies reveal comparable accuracy, in terms of both displacement and stress, compared with fully integrated spline-based shell elements, while at the same time reducing storage and computational cost associated with forming element stiffness and mass matrices and force vectors. The high accuracy with low computational cost makes the proposed quadratures along with higher-order spline bases, in particular polynomial orders, p = 5 and 6, good choices for alleviating membrane and shear locking in shells.

42 ENGINEERING↗

DOE OSTI2026

Spin-Valley Locking in 2 H -TaS 2 and Its Co-Intercalated Counterpart: Roles of Surface Domains and Co Intercalation

Tuning and probing spin-valley coupling is key to understanding correlated ground states in 2H-TaS 2 . Its magnetically intercalated analogue, Co 1/3 TaS 2 , introduces additional degrees of freedom, including modified interlayer coupling and magnetism, to modulate spin-valley physics. Surface-sensitive probes like ARPES are essential for accessing surface spin texture, yet previous studies on 2H-TMDs have reported conflicting results regarding spin-polarized bands, leaving open whether these discrepancies are intrinsic or extrinsic. Here, in this study, we performed spatially resolved spin-ARPES measurements on 2H-TaS 2 and Co 1/3 TaS 2 . Our results reveal robust spin-valley locking on both compounds. Importantly, Co intercalation enhances interlayer hybridization and introduces magnetism while preserving the TaS 2 -derived spin texture. We further observe a spatial reversal of the out-of-plane spin polarization, which we attribute to different surface domains. This effect complicates quantifying spin textures and may underlie prior inconsistent observations. Our findings provide microscopic insight into how interlayer interactions and surface domains together govern spin-valley phenomena in layered TMDs.

Spin-resolved angle-resolved photoemission spectro↗

DOE OSTI2020

A microchip microcontroller-based transducer controller for non-contact scanning probe microscopy with phase-locked loop, amplitude, and Q control

An inexpensive yet versatile transducer controller for non-contact scanning probe microscopy (SPM) based on a PIC32 microcontroller from Microchip Technology, Inc is described. In addition to feedback control using the amplitude or phase of the signal from the non-contact transducer, the controller includes a phase-locked loop for frequency-shift feedback, as well as fixed-amplitude, quality factor (Q) control, and self-excitation modes. Apart from the input amplifiers, output buffers, and the Q-control circuit, all other functions of the controller are instantiated in software on the microchip, enabling rapid changes in operating parameters if needed. The controller communicates with a host personal computer via a simple serial connection. The controller has been tested with a quartz tuning-fork transducer but can be used with any oscillating non-contact transducer.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

A versatile X-ray phase retarder for lock-in XMCD measurements

X-ray magnetic circular dichroism (XMCD) is a technique commonly used to probe magnetic properties of materials with element and orbital selectivity, which requires the use of circularly polarized (CP) X-rays. It is possible to accomplish XMCD experiments with fixed CP and alternating the magnetic field orientation, but most reliable data are obtained when alternating the magnetization orientation and the polarization between right and left helicities. A versatile strategy has been developed to perform XMCD experiments using a hard X-ray quarter-wave plate, at both polychromatic dispersive and conventional monochromatic optics, in combination with synchronous data acquisition. The switching frequency waveform is fed into a lock-in amplifier to detect and amplify the XMCD signal. The results on a reference sample demonstrate an improvement in data quality and acquisition time. The instrumentation successfully generated 98% of CP X-rays switching the beam helicity at 13 Hz, with the possibility of faster helicity switching once it is installed at the new Brazilian fourth-generation source, SIRIUS.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Dark Lock-in Thermography Identifies Solder Bond Failure as the Root Cause of Series Resistance Increase in Fielded Solar Modules

Correlating the electrical performance of photovoltaic modules to the spatially resolved photoluminescence, electroluminescence, and dark lock-in thermography (DLIT) images is an important long-term goal for developing solar cell technology. These images offer highly sophisticated and detailed information about the spatial distribution and (if imaged at successive time intervals) temporal degradation of local series and shunt resistances. There have been extensive studies to correlate these imaging techniques to local characteristics at the cell level. However, it has been difficult to extract and quantify module-level information from the techniques. In this study, we interpret module current-voltage (I-V) measurements along with corresponding DLIT images within a module-scale simulation framework, demonstrating that series resistance degradation of the module I-V characteristics, in this case, can be attributed to solder bond failures. Our simulations highlight how current crowding associated with a failed solder joint (or a section of the solder pad) translates to the characteristic point-like (asymmetric doublet) heating pattern in neighboring solder joints (or the neighboring regions of the solder pad). Overall, the correlation between series resistance and solder joint degradation could inform expedited diagnosis of field degradation of solar modules.

42 ENGINEERING↗

DOE OSTI2022

Disentangling Coexisting Structural Order Through Phase Lock-In Analysis of Atomic-Resolution STEM Data

As a real-space technique, atomic-resolution STEM imaging contains both amplitude and geometric phase information about structural order in materials, with the latter encoding important information about local variations and heterogeneities present in crystalline lattices. Such phase information can be extracted using geometric phase analysis (GPA), a method which has generally focused on spatially mapping elastic strain. Here we demonstrate an alternative phase demodulation technique and its application to reveal complex structural phenomena in correlated quantum materials. As with other methods of image phase analysis, the phase lock-in approach can be implemented to extract detailed information about structural order and disorder, including dislocations and compound defects in crystals. Extending the application of this phase analysis to Fourier components that encode periodic modulations of the crystalline lattice, such as superlattice or secondary frequency peaks, we extract the behavior of multiple distinct order parameters within the same image, yielding insights into not only the crystalline heterogeneity but also subtle emergent order parameters such as antipolar displacements. When applied to atomic-resolution images spanning large (~0.5 × 0.5 μm 2 ) fields of view, this approach enables vivid visualizations of the spatial interplay between various structural orders in novel materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2024

Correlation of Dimer-Linker-Induced Conformational Lock with Nonradiative Energy Loss in Organic Solar Cells

The efficiencies of dimer-based devices still lag those of their small molecule-based counterparts. This is primarily due to the considerable dihedrals in the dimer skeleton, which compromises the molecular packing, thus influencing the charge generation and nonradiative voltage loss (ΔV oc,nr ). Herein, we developed two dimeric acceptors with varied π-linkers to investigate the influence of linker-induced conformational lock on ΔV oc,nr . We find that the helically lapped O-shaped dimer delivers better intermolecular packing than the planar S-shaped one that incorporates a bulkier π-linker. However, its planar skeleton is instead more favorable for forming a compact and ordered stacking with the host acceptor in ternary blend. This possibly promotes exciton dissociation, thus reducing the nonradiative decay of excited states. Moreover, its longer exciton lifetime could offer additional charge-transfer channels. Finally, these contributions effectively minimize ΔV oc,nr to 0.195 eV, while delivering a high efficiency approaching 20% in the derived ternary device.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Chirality locking charge density waves in a chiral crystal

In Weyl semimetals, charge density wave (CDW) order can spontaneously break the chiral symmetry, gap out the Weyl nodes, and drive the material into the axion insulating phase. Investigations have however been limited since CDWs are rarely seen in Weyl semimetals. Here, using scanning tunneling microscopy/spectroscopy (STM/S), we report the discovery of a novel unidirectional CDW order on the (001) surface of chiral crystal CoSi – a unique Weyl semimetal with unconventional chiral fermions. The CDW is incommensurate with both lattice momentum and crystalline symmetry directions, and exhibits an intra unit cell π phase shift in the layer stacking direction. The tunneling spectrum shows a particle-hole asymmetric V-shaped energy gap around the Fermi level that modulates spatially with the CDW wave vector. Combined with first-principle calculations, we identify that the CDW is locked to the crystal chirality and is related by a mirror reflection between the two enantiomers of the chiral crystal. Our findings reveal a novel correlated topological quantum state in chiral CoSi crystals and raise the potential for exploring the unprecedented physical behaviors of unconventional chiral fermions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗