SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation presents the oil refinery requirements and conditions needed for the steam, the integration of the oil refinery with a small modular reactor light water reactor (LWR) and small modular reactor high temperature gas reactor (HTGR), and the carbon avoided by replacing the currently utilized natural gas with nuclear energy.
Metallic nuclear fuels have traditionally been used for sodium cooled fast reactor applications, but recent work has been done in applying metal fuel technologies to the light water reactor and molten salt reactor spaces. This presentation offers a brief history of metallic fuel use in SFRs and an overview of metallic fuel uses in the LWR and MSR spaces.
Uranium Dioxide (UO 2 ) is widely used as a fuel in current light water reactors (LWRs). Upon accumulation of radiation damage, LWR UO 2 fuel pellets start to develop a different microstructure at the pellet periphery when fuel burnup exceeds 45–50 GWd/tHM. The resulting porous, nanocrystalline microstructure is one of the most prominent microstructural changes occurring in such fuel. Its fracture mechanisms, which causes fuel fine fragmentation, could impact safety limits when the cladding breaches. Direct measurements of these properties are challenging, therefore a surrogate obtained via ion irradiation can be used. In this study, multiple microcantilevers were fabricated by focused ion beam from both fresh UO 2 and UO 2 irradiated with 84 MeV Xe 26+ ions to a peak dose of 1357 displacements per atom (dpa). Further, the irradiation produced a pseudo high burnup structure approximately 2 µm below the surface. In-situ nano-mechanical bending tests were conducted to investigate the fracture behavior and the effect of the surrogate UO 2 high burnup structure on local fracture properties. Fresh UO 2 fuel was observed to fracture in transgranular mode without nucleation or movement of dislocations. However, the Xe-irradiated nanocrystalline microcantilevers fractured along the grain boundaries, with no influence from the pre-existing micro-cracks in the microcantilever. Fracture toughness for this type of surrogate high burnup UO 2 structure is reported for the first time in literature. Both the fracture stress and toughness show degradation for UO 2 as a result of Xe-irradiation.
Analysis of fission gas bubbles (FGBs) in light-water reactor (LWR) fuel is needed to improve the understanding and predictive capability of fuel evolution under normal- and transient conditions. One of the most important parameters of a FGB is the pressure of the gas, primarily Xe, inside it. Bubble volume and location (inter- vs. intragranular) are important considerations as well. However, experimental analysis of such bubbles is challenging due to their small size and embedded nature, and usefulness of the data requires large numbers be analyzed. This paper proposes a method to measure the pressure of Xe bubbles using X-ray spectrum imaging (XSI) in scanning transmission electron microscopy (STEM). From X-ray generation and instrumental parameters, the number of Xe atoms yielding a given number of Xe L-series X-ray counts is estimated, and then from the estimated volume of the bubble the Xe density is estimated, which can then be converted to pressure via an equation-of-state. We apply the method to XSI datasets from high burnup (HBu) fuel from North Anna 1 reactor in as-irradiated and post-LOCA-test conditions and find Xe pressures in the FGBs clustered around 1 GPa.
This paper presents the results of High-burnup Experiments for Reactivity-initiated Accident (HERA) Modeling & Simulation (M&S) exercise. The HERA project under the Nuclear Energy Agency (NEA) Second Framework for Irradiation Experiments (FIDES-II) program is focused on studying Light Water Reactor (LWR) fuel behavior during Reactivity-Initiated Accident (RIA) conditions. The Part I M&S cases are based on a series of tests in the Transient Reactor Test (TREAT) facility in the United States and the Nuclear Safety Research Reactor (NSRR) in Japan. The purpose of this work is to evaluate the test design to accomplish its goals in establishing clearer understanding of the effects of power pulse width during RIA conditions. Further, the blind predictions using various computational tools have been performed and compared amongst to interpret the behaviors of high burnup fuels during RIA. While many international participants evaluate the thermal–mechanical behavior of fuel rod under different conditions, a considerable scatter of outputs comes out for the cases due to the disparity between codes in predicting mechanical behaviors. In general, however, the results of thermal–mechanical analysis elaborate that nominal design conditions the shorter pulse width tests in NSRR should cause cladding failures while the TREAT tests appear to have more split prediction of failure or not. Furthermore, the sensitivity analysis varying key testing parameters reveals the considerable effect of power pulse width and total energy deposition on prediction of fuel rod failure.
Many next generation light water reactor (LWR) concepts, such as mobile small modular reactors, are seeking to use smaller core dimensions than conventional reactor types. Smaller reactor cores require an increase in fissile material to maintain reactivity. For non-proliferation purposes, enrichment increases are limited to less than 20% (high assay low enriched uranium, [HALEU]) and so higher uranium density fuels than UO 2 must be considered. To this end, uranium-molybdenum alloys were tested using the Fission Accelerated Steady-state Test (FAST) approach. The experiment test matrix is focused on identifying the temperature transition between low swelling and high fission gas retention to break away swelling and low fission gas retention. This paper documents the results of irradiation tests and post-irradiation examinations (PIE) including neutron radiography, rodlet profilometry, fission gas collection analysis, and optical metallography. The results of these tests showed that unconstrained U-Mo fuels (solid, Na-bonded rodlets) have a swelling threshold between 400-450°C with minimal fission gas release below this point. Higher temperature solid fuel showed microstructural zoning with small pore networks while lower temperature solid fuels have a uniform microstructure with large pore networks. U-Annular Mo fuels where swelling had some self-constraint imposed upon it, were shown to have much reduced swelling compared to their solid counterparts as well as very low fission gas release for irradiation temperatures up to 500°C. These initial results show that the use of U-Mo in constrained fuel geometries could be used as a high uranium density HALEU fuel for LWRs.
Under the 2022 Inflation Reduction Act, tax credits of up to $3/kgH 2 are available to hydrogen producers if they generate emissions at levels below 0.45 kgCO 2 e/kgH 2 , spurring producers to explore how hydrogen production via electrolysis using electricity generated by nuclear power may qualify for such tax credits. With uranium as a primary fuel for nuclear power plants (NPPs) and no on-site emissions, the upstream emissions associated with nuclear fuel supply chains largely determine the carbon intensity of nuclear energy. Using the GREET (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model, we evaluated the life-cycle greenhouse gas (GHG) emissions of uranium production and the use of uranium to generate electricity in light water reactor (LWR) NPPs. We evaluated the process chemicals and energy inputs throughout the nuclear fuel supply chain to identify the major contributors to nuclear fuel cycle GHG emissions. Such emissions are estimated at 3.0 gCO 2 e/kWh at NPPs in the United States. The greatest share of nuclear fuel cycle GHG emissions—comprising 53% of total emissions—are associated with electricity consumption throughout the fuel supply chain. We extended the analysis to include an evaluation of the carbon intensity of H 2 production via electrolysis using nuclear power from LWRs. Finally, we examined the impact of future (2035 and 2050) electricity supply chain scenarios on nuclear fuel cycle GHG emissions. Our analysis revealed a decrease of 33% (2035) and 46% (2050) in the carbon intensity of nuclear electricity relative to current nuclear fuel cycle GHG emissions.
This is an Excel-based time-independent discount cash flow calculator for LWR-HTSE systems. The tool incorporates (1) discounted cash flow and levelized cost of hydrogen (LCOH) analysis, (2) sensitivity analysis with respect to select financial performance metrics with output ‘tornado’ charts, (3) profitability analysis represented by heat maps using the two most sensitive parameters, (4) electricity versus hydrogen production preference analysis by comparing change in net present value (?NPV) between NPP-HTSE and business-as-usual electricity production for the grid, and (5) competitiveness analysis by comparing the calculated LCOH for NPP-HTSE with that of steam methane reforming, which is the conventional process to produce hydrogen.
The ORIGEN module in SCALE is a common method of performing quick depletion and irradiation calculations of various materials in light-water reactors. However, these analyses depend on the neutron spectra in the ARP libraries being accurate for the situation presented. When using insertable burnable absorbers in a LWR with Li-6 in order to produce tritium, the neutron spectrum is highly different than those in the default libraries in ORIGEN, which leads to significant mispredictions in tritium production. Therefore, custom libraries are required, and when comparing to lattice physics codes (CASMO5 and WIMS10) with ORIGEN, using custom libraries is much more accurate than using the default libraries.
The United States (U.S.) nuclear-generation fleet stands as a critical national strategic asset, playing a pivotal role in achieving climate goals. Operating on light-water reactor (LWR) technologies, this fleet provides the largest share of U.S. carbon-free electrical generation, ensuring 24/7 clean-energy stability. With a proven track record of reliability while operating at high-capacity factors, consistently above 90%, the existing nuclear fleet serves as a cornerstone for sustainable energy. The Department of Energy’s (DOE’s) Light Water Reactor Sustainability (LWRS), Flexible Plant Operations and Generation pathway addresses U.S. nuclear power plant (NPP) grid integration challenges in the face of evolving energy landscapes. Research at Idaho National Laboratory (INL) highlights the potential synergy between high-temperature steam-electrolysis (HTSE) technology and nuclear steam and electricity during periods of high renewable grid penetration. Large-scale nuclear-integrated hydrogen production through HTSE presents significant potential for decarbonizing such energy-intensive sectors as oil refining, petrochemicals, ammonia, and fertilizers. The strategic advantage lies in the nuclear sector’s capability to deliver clean electrical and/or steam output during periods of low demand. Nuclear-produced hydrogen—with its ability to provide high-purity clean H 2 well below the national standard of 1 kg of CO 2 per kg of H 2 —represents a breakthrough methodology. This emphasizes the crucial role NPPs can fill in addressing the increasing need for clean hydrogen, establishing them as essential contributors to decarbonization. This report specifically delves into hydrogen-generation opportunities from the U.S. Gulf Coast region. This study aims to assess NPP capabilities for hydrogen production and to identify practical nearby industrial and pipeline-operator off-takers for nuclear-integrated hydrogen production as well as to present some specific case-study analysis showing the conditions under which nuclear hydrogen production and sale can be profitable. Also considered in this report is preliminary analysis of nuclear-heat opportunities accessible near Waterford NPP via transportation of hypothetical steam pipelines and heat-exchange equipment.
This report demonstrates the SCALE code system’s capabilities in modeling and simulating scenarios in the High-Temperature Gas-cooled Reactor (HTGR) nuclear fuel cycle as part of a United States Nuclear Regulatory Commission (NRC) project that aims to demonstrate the capabilities of the SCALE and MELCOR codes for non-light water reactor (non-LWR) modeling and simulation.
This report summarizes research activities conducted at Argonne National Laboratory in support of the development, qualification and certification of additively manufactured (AM) metallic components for the long-term sustainability of light water reactors. In this program, AM 316L stainless steel (SS) has been evaluated in light water reactor (LWR) environments for their fatigue, environmentally assisted fatigue, and stress corrosion cracking performances on specimens in as-printed condition, aiming for facilitating the regulatory acceptance and ultimately adoption of AM components in aging LWRs.
MELCOR has been used extensively to facilitate virtual investigations into severe nuclear accidents for light-water reactors (LWRs). Non-light water reactors (non-LWRs) render some LWR-centric approaches potentially unsuitable. MELCOR has been instrumental in analyzing source terms for LWRs and has recently expanded its applicability to non-LWRs. To simplify radionuclide (RN) tracking, MELCOR currently groups elements into 17 classes, each containing representative species. This grouping, optimized for LWRs, is not appropriate for non-LWRs due to the different chemistry. This necessitates a reevaluation of radionuclide transport modeling. This report introduces a new class scheme for MELCOR tailored to MSR modeling, expanding the current 17 classes to 32 and are explained in the context of a UF 4 fueled FLiBe carrier MSR. It provides a discussion and justification for the new groupings and outlines a methodology for discovering and defining additional classes in MELCOR using a sample calculated RN inventory and a Gibbs energy minimizer (GEM).
Reactor Pressure Vessels (RPVs) are critical components in nuclear reactors, housing the reactor core and coolant under extreme conditions of temperature, pressure, and radiation. These harsh environments contribute to the degradation of RPV materials over time, presenting challenges for extending reactor operations beyond their original design lifespans. The NRC Expanded Materials Degradation Assessment (EMDA) report volume 3 have been instrumental in guiding research to support extending the operational life of light water reactors (LWRs) up to 80 years. It provides a comprehensive framework to address technical challenges related to aging and degradation mechanisms in RPVs. The LWRS program has played a key role in advancing this research, supporting projects such as the UCSB ATR-2 Experiment, material testing from Zion and Palisades reactors, and the development of advanced mini-compact tension testing techniques. These efforts have been crucial in identifying and addressing gaps in our understanding of RPV aging, contributing to the successful subsequent license renewals of eight LWR units in the U.S. The EMDA report volume 3, built on the Phenomena Identification and Ranking Table (PIRT) analysis from earlier versions of the EPRI Materials Degradation Matrix (MDM) and Issue Management Tables (IMTs), provides a detailed assessment of RPV degradation mechanisms. However, as EPRI has updated the MDM and IMT, it is important to revisit research priorities and methodologies to reflect these changes. The revised MDM and IMT may introduce new factors affecting long-term RPV performance and safety, highlighting the need for continued research and updated guidance to ensure the reliable and safe operation of reactors beyond 80 years.
The System Analysis Module (SAM) is an advanced and modern system analysis tool under development at Argonne National Laboratory for advanced non-LWR reactor safety analysis. It aims to provide fast-running, modest-fidelity, whole-plant transient analyses capabilities, which are essential for fast turnaround design scoping and engineering analyses of advanced reactor concepts. While SAM is being developed as a system-level modeling and simulation tool, advanced modeling techniques being implemented include a reduced-order three-dimensional module, pseudo 3-D conjugate heat transfer modeling in reactor core, flexible and multi-scale modeling of heat transfer between fluid and structures, in addition to the advances in software environments and design, and numerical methods. SAM aims to be a generic system-level safety analysis tool for advanced non-LWRs, including Liquid-Metal-cooled fast Reactors (LMR), Molten Salt Reactors (MSR), Fluoride-salt-cooled High-temperature Reactors (FHR), and High-Temperature Gas-cooled Reactors (HTGR). SAM takes advantage of advances in physical modeling, numerical methods, and software engineering to enhance its user experience and usability. It utilizes an object-oriented computational framework (MOOSE), and its underlying meshing and finite-element library and linear and non-linear solvers, to leverage the modern advanced software environments and numerical methods. This document provides the theoretical and technical basis of the code to help users understand the underlying physical models (such as governing equations, closure models, and component models), system modeling approaches, numerical discretization and solution methods, and the overall capabilities in SAM. As new code capabilities and features are added, the SAM Theory Manual will be updated periodically to keep it consistent with the state of the development.
The System Analysis Module (SAM) is a modern system analysis tool being developed at Argonne National Laboratory for advanced non-LWR safety analysis. It aims to provide fast-running, whole-plant transient analyses capability with improved-fidelity for Sodium-cooled Fast Reactors (SFR), Lead-cooled Fast Reactors (LFR), and Molten Salt Reactors (MSR) or Fluoride-cooled High-temperature Reactors (FHR). SAM takes advantage of advances in physical modeling, numerical methods, and software engineering to enhance its user experience and usability. It utilizes an object-oriented application framework (MOOSE), and its underlying meshing and finite-element library (libMesh) and linear and non-linear solvers (PETSc), to leverage the modern advanced software environments and numerical methods. This document provides a user’s guide, which will help users understand the input description and core capabilities of the SAM code. A brief overview of the code is presented, as well as how to obtain and run it. The input syntax for various parts of the code is provided. Additionally, a number of example problems, starting with simple unit component problems to problems with increasing complexity, are provided. Because the code is still under active development, this SAM User’s Guide will evolve with periodic updates.
GAIN Project CRADA Number NFE-21-08839, entitled “SMR Containment Cable and EPA System” was initiated by the partnership of Oak Ridge National Laboratory (ORNL) and Engineered Solutions Group (ESG) to test an ESG-designed Electrical Penetration Assembly and Containment Cabling System Qualified for not only SMR technologies, but also Advanced Reactors design. An Electrical Penetration Assembly (EPA) is a component used to allow electrical power and signal conductors as well as optical fiber through the nuclear reactor’s containment structure while maintaining a pressure barrier. The EPA ensures the containment's integrity both during the normal operation and also accident conditions by providing a sealed passage for power and signals. This project was undertaken to fill the equipment gap of EPA and Cabling Systems that require much more severe environmental requirements than legacy plant applications present due to their smaller containment volumes that result in high energy densities compared to legacy designs. This high energy density results in severe accident environments and also more severe normal operating conditions.This document describes cost effective approaches to qualify a unique EPA for Small Modular Reactor (SMR) technologies as legacy LWR EPA technologies will likely have inherent material performance insufficiencies. The DBA profiles for SMRs (and some Advanced Reactor Technologies) are more severe than the legacy qualification requirements making the design of the qualification testing system challenging as the temperatures and pressures can approach the limits permitted by ASME Pressure Vessel Code, as well as accident temperatures exceeding the capability of polymeric gaskets and dielectrics. Small Modular Reactors are designed to have, as the name suggests, modularity which implies sized for factory fabrication and subsequent assembly at the power plant site. SMR containment is much smaller than a legacy Light Water Reactor containment. The containment walls are likely to be comprised of stainless steel. Qualifying Electrical Penetration Assemblies (EPAs) through these steel vessels are of interest in this work. Methods are presented here that discuss critical safety and cost effectiveness for these SMR EPA’s test systems.
Burnable absorbers (BAs) are used in UO 2 fuels to tune the reactivity in a light water reactor (LWR) particularly at the beginning of life of the fuel. BAs are elements that have high neutron absorption cross sections and because of this property can prevent power peaking. The addition of BAs reduces the reactivity at the beginning of life, and this in turn allows for the increase of enrichments from > 5 % 235 U up to ~ 10 %. This also enables the increase of the burnup limit to 75 GWd/MTU and the cycle length to 24 months. The BA are eventually consumed under irradiation, and their concentration is diminished at roughly 10-20 GWd/MTU. The objective of this report is to fabricate UO 2 fuels that have been doped with BAs (Gd 2 O 3 in this case) and subsequently irradiate them in the high flux isotope reactor (HFIR) at Oak Ridge National Laboratory. The test specimen that are fabricated include 4 and 8 weight % Gd 2 O 3 doped UO 2 to investigate the influence of the BAs on the thermophysical properties and microstructure of the fresh and irradiated fuel.