Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LUNAR TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Photoelectrons and lunar limb shocks

It is suggested that boundary conditions for solar wind/lunar limb interactions are active. The 'whole-moon' limb does not evoke a shock cone because warm solar wind electrons are replaced by cool photoelectrons that are ejected from the generally smooth areas of the lunar terminator illuminated at glancing angles by the sun. A localized volume of low thermal pressure is created in the solar wind by these cool photoelectrons. The solar wind expands into this volume without shock production. Directly illuminated highland areas exchange hot photoelectrons for warm solar wind electrons. The hot electrons generate a localized pressure increase in the adjacent solar wind flow which evokes a shock streamer in the solar wind. Shock streamers are identifiable by a coincident increase in the magnitude of the solar wind magnetic field. Shock occurrence is controlled by lunar topography, solar activity in the hard ultraviolet, solar wind electron density and thermal velocity, and the density of the solar wind magnetic field.

Criswell, D. R.↗
NASA NTRS1974

Hypervelocity impact heating of porous aluminum

Estimates of the thermal energy and other properties of the postshock condition are obtained for porous aluminum targets impacted by iron or aluminum projectiles, in the shock pressure range between about 0.4 and 8 Mbar. The starting point is the determination of a distinct Hugoniot equation for each value of porosity, from available experimental data. Rankine-Hugoniot equations and a Mie-Gruneisen equation of state supply the relations necessary for finding the thermodynamic properties of adiabatically relaxed materials. The results are of interest in such fields as ablation studies, meteoritics, and lunar topography.

Rehfuss, D. E.↗
NASA NTRS1982

Support of topographic and other loads on the moon and on the terrestrial planets

The existence of mascons on the moon indicates that the lunar elastic lithosphere can support substantial loads for about three billion years. Lunar topography also appears to be uncompensated. Observations of gravity on Mars show that the Tharsis uplift is only partially compensated. A number of authors have attributed this support to lithospheric flexure. In this paper it is shown that membrane stresses play an important role in the support of loads on the moon, Mars, and Mercury. For loads that have been expressed in terms of spherical harmonics analytical expressions for the degree of compensation are obtained as a function of the degree of the load. The results are compared with the observed dependence of the ratio of gravitational potential to topography on degree. It is also concluded that membrane stresses can support a significant ellipticity for a tidally despun planetary body.

Willemann, R. J.↗
NASA NTRS2004

SILVER: Surface Imaging for Lunar Volatiles, Resources, and Exploration

The Surface Imaging for Lunar Volatiles, Exploration, and Resources (SILVER) instrument is a proposed imaging investigation for the 2008 Lunar Reconnaissance Orbiter (LRO) mission. SILVER and its experienced Measurement Team will prepare for and support future lunar human exploration activities, especially landing site identification and certification on the basis of potential resources. SILVER combines a high-resolution pushbroom visible imaging channel (SILVER-HR) and a wide-field-of-view (45 deg) framing imaging channel (SILVER-WF). SILVER-HR will obtain a single-detector 6 km imaging swath of 12,228 pixels at 0.5 m/pixel to image greater than 100 sq km target areas from 50 km altitude, imaging greater than 15% the lunar surface during a 1 year nominal mission. SILVER-HR has excellent stray-light rejection and its imaging detector has selectable time delay integration (TDI) with up to 128 stages for extreme low-light sensitivity, permitting direct imaging of permanently shadowed polar regions in scattered sunlight or earthshine. SILVER-WF will obtain geodetic framing images in a 2048 x 2048 format at 20m/pixel, with 60% along-track overlap stereo for imaging context and for derivation of a global digital elevation model of meter-scale lunar topography.

Pappalardo, R. T.↗
NASA NTRS2007

Plume Impingement to the Lunar Surface: A Challenging Problem for DSMC

The President's Vision for Space Exploration calls for the return of human exploration of the Moon. The plans are ambitious and call for the creation of a lunar outpost. Lunar Landers will therefore be required to land near predeployed hardware, and the dust storm created by the Lunar Lander's plume impingement to the lunar surface presents a hazard. Knowledge of the number density, size distribution, and velocity of the grains in the dust cloud entrained into the flow is needing to develop mitigation strategies. An initial step to acquire such knowledge is simulating the associated plume impingement flow field. The following paper presents results from a loosely coupled continuum flow solver/Direct Simulation Monte Carlo (DSMC) technique for simulating the plume impingement of the Apollo Lunar module on the lunar surface. These cases were chosen for initial study to allow for comparison with available Apollo video. The relatively high engine thrust and the desire to simulate interesting cases near touchdown result in flow that is nearly entirely continuum. The DSMC region of the flow field was simulated using NASA's DSMC Analysis Code (DAC) and must begin upstream of the impingement shock for the loosely coupled technique to succeed. It was therefore impossible to achieve mean free path resolution with a reasonable number of molecules (say 100 million) as is shown. In order to mitigate accuracy and performance issues when using such large cells, advanced techniques such as collision limiting and nearest neighbor collisions were employed. The final paper will assess the benefits and shortcomings of such techniques. In addition, the effects of plume orientation, plume altitude, and lunar topography, such as craters, on the flow field, the surface pressure distribution, and the surface shear stress distribution are presented.

Lumpkin, Forrest↗
NASA NTRS2011

Multiple-Zone Diffractive Optic Element for Laser Ranging Applications

A diffractive optic element (DOE) can be used as a beam splitter to generate multiple laser beams from a single input laser beam. This technology has been recently used in LRO s Lunar Orbiter Laser Altimeter (LOLA) instrument to generate five laser beams that measure the lunar topography from a 50-km nominal mapping orbit (see figure). An extension of this approach is to use a multiple-zone DOE to allow a laser altimeter instrument to operate over a wider range of distances. In particular, a multiple-zone DOE could be used for applications that require both mapping and landing on a planetary body. In this case, the laser altimeter operating range would need to extend from several hundred kilometers down to a few meters. The innovator was recently involved in an investigation how to modify the LOLA instrument for the OSIRIS asteroid mapping and sample return mission. One approach is to replace the DOE in the LOLA laser beam expander assembly with a multiple-zone DOE that would allow for the simultaneous illumination of the asteroid with mapping and landing laser beams. The proposed OSIRIS multiple-zone DOE would generate the same LOLA five-beam output pattern for high-altitude topographic mapping, but would simultaneously generate a wide divergence angle beam using a small portion of the total laser energy for the approach and landing portion of the mission. Only a few percent of the total laser energy is required for approach and landing operations as the return signal increases as the inverse square of the ranging height. A wide divergence beam could be implemented by making the center of the DOE a diffractive or refractive negative lens. The beam energy and beam divergence characteristics of a multiple-zone DOE could be easily tailored to meet the requirements of other missions that require laser ranging data. Current single-zone DOE lithographic manufacturing techniques could also be used to fabricate a multiple-zone DOE by masking the different DOE zones during the manufacturing process, and the same space-compatible DOE substrates (fused silica, sapphire) that are used on standard DOE s could be used for multiple- zone DOE s. DOEs are an elegant and cost-effective optical design option for spacebased laser altimeters that require multiple output laser beams. The use of multiple-zone DOEs would allow for the design and optimization of a laser altimeter instrument required to operate over a large range of target distances, such as those designed to both map and land on a planetary body. In addition to space-based laser altimeters, this technology could find applications in military or commercial unmanned aerial vehicles (UAVs) that fly at an altitude of several kilometers and need to land. It is also conceivable that variations of this approach could be used in land-based applications such as collision avoidance and robotic control of cars, trains, and ships.

Ramos-Izquierdo, Luis A.↗
NASA NTRS2010

GLGM-3: A Degree-ISO Lunar Gravity Model from the Historical Tracking Data of NASA Moon Orbiters

In preparation for the radio science experiment of the Lunar Reconnaissance Orbiter (LRO) mission, we analyzed the available radio tracking data of previous NASA lunar orbiters. Our goal was to use these historical observations in combination with the new low-altitude data to be obtained by LRO. We performed Precision Orbit Determination on trajectory arcs from Lunar Orbiter 1 in 1966 to Lunar Prospector in 1998, using the GEODYN II program developed at NASA Goddard Space Flight Center. We then created a set of normal equations and solved for the coefficients of a spherical harmonics expansion of the lunar gravity potential up to degree and order 150. The GLGM-3 solution obtained with a global Kaula constraint (2.5 x 10(exp -4)/sq l) shows good agreement with model LP150Q from the Jet Propulsion Laboratory, especially over the nearside. The levels of data fit with both gravity models are very similar (Doppler RMS of approx.0.2 and approx. 1-2 mm/s in the nominal and extended phases, respectiVely). Orbit overlaps and uncertainties estimated from the covariance matrix also agree well. GLGM-3 shows better correlation with lunar topography and admittance over the nearside at high degrees of expansion (l > 100), particularly near the poles. We also present three companion solutions, obtained with the same data set but using alternate inversion strategies that modify the power law constraint and expectation of the individual spherical harmonics coefficients. We give a detailed discussion of the performance of this family of gravity field solutions in terms of observation fit, orbit quality, and geophysical consistency.

Mazarico, E.↗
NASA NTRS2014

GRGM900C: A Degree 900 Lunar Gravity Model from GRAIL Primary and Extended Mission Data

We have derived a gravity field solution in spherical harmonics to degree and order 900, GRGM900C, from the tracking data of the Gravity Recovery and Interior Laboratory (GRAIL) Primary (1 March to 29 May 2012) and Extended Missions (30 August to 14 December 2012). A power law constraint of 3.6 × 10(exp −4)/l(exp 2) was applied only for degree l greater than 600. The model produces global correlations of gravity, and gravity predicted from lunar topography of greater than or equal to 0.98 through degree 638. The model's degree strength varies from a minimum of 575-675 over the central nearside and farside to 900 over the polar regions. The model fits the Extended Mission Ka-Band Range Rate data through 17 November 2012 at 0.13 micrometers/s RMS, whereas the last month of Ka-Band Range-Rate data obtained from altitudes of 2-10 km fit at 0.98 micrometers/s RMS, indicating that there is still signal inherent in the tracking data beyond degree 900.

Gravity↗
NASA NTRS2017

Design and characterization of a low cost CubeSat multi-band optical receiver to map water ice on the lunar surface for the Lunar Flashlight mission

Lunar Flashlight is an innovative NASA CubeSat mission dedicated to mapping water ice in the permanently shadowed regions of the Moon, which may act as cold traps for volatiles. To this end, a multi-band reflectometer will be sent to orbit the Moon. This instrument consists of an optical receiver aligned with four lasers, each of which emits sequentially at a different wavelength in the near-infrared between 1 μm and 2 μm. The receiver measures the laser light reflected from the lunar surface; continuum/absorption band ratios are then analyzed to quantify water ice in the illuminated spot. Here, we present the current state of the optical receiver design. To optimize the optical signal-to-noise ratio, we have designed the receiver so as to maximize the laser signal collected, while minimizing the stray light reaching the detector from solar-illuminated areas of the lunar surface outside the field-of-view, taking into account the complex lunar topography. Characterization plans are also discussed. This highly mass- and volume-constrained mission will demonstrate several firsts, including being one of the first CubeSats performing science measurements beyond low Earth orbit.

Sellar, Glenn R.↗
NASA NTRSDate not supplied

Monocular Horizon Navigation

The Artemis program advances towards operations on the lunar surface, where precise surface localization is a driving need for safety and science. Using the observable horizon as an image landmark allows for estimating the photographer’s position. This work analyzes the application of Perspective-n-Point (PnP) algorithms to this lunar localization problem. Batch simulations using lunar topography display the accuracy and drawbacks of these methods. Monte Carlo techniques show the pipeline’s solutions as measurements provided to a navigation filter. When filtered, these solutions have position errors of 50 meters or better, which is similar to or better than the performance of other methods of surface localization.

optical navigation↗
NASA NTRS1999

The Lunar Crustal Thickness from Analysis of the Lunar Prospector Gravity and Clementine Topography Datasets

The Lunar Prospector spacecraft has mapped the gravity field of the Moon to a level of resolution never achieved before, and a spherical harmonic representation to degree and order 100 is available. When combined with the topography dataset produced by the Clementine mission, the resulting Bouguer anomaly map is interpreted to model the thickness of the lunar crust. Such models are crucial to understanding the lunar thermal history and the formation of geological features such as mascon basins, several more of which have been newly discovered from this dataset. A two-layer planetary model was used to compute the variations of the depth to the lunar Moho. The thickness values ranged from near 0 to 120 km. There is significant agreement with previous work using the Clementine gravitational field data with differences in specific locations such as South Pole-Aitken Basin, for example.

Asmar, S.↗
NASA NTRS1997

Topography of the Lunar South Polar Region: Implications for the Size and Location of Permanently Shaded Areas

We analyze Clementine altimetry to constrain the size and location of proposed permanently shadowed regions in the vicinity of the lunar south pole. Long and short wavelength topography in the vicinity of the pole, in combination with measurements of depths of well-preserved craters and basins and the lunar topographic power spectrum, have direct bearing on the nature of elevations in the south polar region. A criterion based on geometric considerations and altimetry demonstrates that the existence of permanent shadowing is not very sensitive to the elevation of the south pole. In addition, permanent shadowing cannot be a consequence of large structures such as the South Pole-Aitken Basin and/or a 300-km degraded polar basin. Perennially dark regions, if they exist, are most likely associated with craters or other axisymmetric features with diameters of at most 80 km centered at the pole. For structures displaced 2 deg from the pole the maximum allowable diameter decreases to approximately 30 km.

Zuber, Maria T.↗
NASA NTRS1977

Radial variation of lunar crater rim topography

The paper presents results of determinations of variations of rim topography as a function of range from the crater rim for a group of morphologically fresh craters. It is found that the rate at which exterior crater topography converges with the surrounding surface is highly variable among different radial directions at individual craters as well as between different craters, and that at several craters, oblique impact appears to have contributed to azimuthal elevation/range variations.

Settle, M.↗
NASA NTRS2012

Topography of the Lunar Poles and Application to Geodesy with the Lunar Reconnaissance Orbiter

The Lunar Orbiter Laser Altimeter (LOLA) [1] onboard the Lunar Reconnaissance Orbiter (LRO) [2] has been operating continuously since July 2009 [3], accumulating approx.5.4 billion measurements from 2 billion on-orbit laser shots. LRO s near-polar orbit results in very high data density in the immediate vicinity of the lunar poles, which are each sampled every ~2h. With more than 10,000 orbits, high-resolution maps can be constructed [4] and studied [5]. However, this requires careful processing of the raw data, as subtle errors in the spacecraft position and pointing can lead to visible artifacts in the final map. In other locations on the Moon, ground tracks are subparallel and longitudinal separations are typically a few hundred meters. Near the poles, the track intersection angles can be large and the inter-track spacing is small (above 80 latitude, the effective resolution is better than 50m). Precision Orbit Determination (POD) of the LRO spacecraft [6] was performed to satisfy the LOLA and LRO mission requirements, which lead to a significant improvement in the orbit position knowledge over the short-release navigation products. However, with pixel resolutions of 10 to 25 meters, artifacts due to orbit reconstruction still exist. Here, we show how the complete LOLA dataset at both poles can be adjusted geometrically to produce a high-accuracy, high-resolution maps with minimal track artifacts. We also describe how those maps can then feedback to the POD work, by providing topographic base maps with which individual LOLA altimetric measurements can be contributing to orbit changes. These direct altimetry constraints improve accuracy and can be used more simply than the altimetric crossovers [6].

Mazarico, Erwan↗
NASA NTRS1964

Lunar impact craters

Topography and evolution of lunar craters - meteoritic impact - selenography

TOPOGRAPHY↗