Lunar dust depth in Mare Cognitum.
Lunar dust depth in Mare Cognitum determined by comparing Ranger VII photographs with laboratory crater photographs
LABORATORY APPARATUS↗
SEARCH · Engineering Papers
Results for “LUNAR MARE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thermal Optical Properties of Lunar Dust Simulants and Their Constituents
The total reflectance spectra of lunar simulant dusts (< 20 mm particles) were measured in order to determine their integrated solar absorptance (alpha) and their thermal emittance (epsilon) for the purpose of analyzing the effect of dust on the performance of thermal control surfaces. All of the simulants except one had a wavelength-dependent reflectivity (p (lambda)) near 0.10 over the wavelength range of 8 to 25 microns and so are highly emitting at room temperature and lower. The 300 K emittance (epsilon) of all the lunar simulants except one ranged from 0.78 to 0.92. The exception was Minnesota Lunar Simulant 1 (MLS-1), which has little or no glassy component. In all cases the epsilon was lower for the < 20 micron particles than for larger particles reported earlier. There was considerably more variation in the lunar simulant reflectance in the solar spectral range (250 to 2500 nm) than in the thermal infrared. As expected, the lunar highlands simulants were more reflective in this wavelength range than the lunar mare simulants. The integrated solar absorptance (alpha) of the simulants ranged from 0.39 to 0.75. This is lower than values reported earlier for larger particles of the same simulants (0.41 to 0.82), and for representative mare and highlands lunar soils (0.74 to 0.91). Since the of some mare simulants more closely matched that of highlands lunar soils, it is recommended that and values be the criteria for choosing a simulant for assessing the effects of dust on thermal control surfaces, rather than whether a simulant has been formulated as a highlands or a mare simulant.
Gaier, James R.↗
Thermal Optical Properties of Lunar Dust Simulants and Their Constituents
The total reflectance spectra of lunar simulant dusts (less than 20 micrometer particles) were measured in order to determine their integrated solar absorptance (alpha) and their thermal emittance (e) for the purpose of analyzing the effect of dust on the performance of thermal control surfaces. All of the simulants except one had a wavelength-dependant reflectivity (p(lambda)) near 0.10 over the wavelength range of 8 to 25 micrometers, and so are highly emitting at room temperature and lower. The 300 K emittance (epsilon) of all the lunar simulants except one ranged from 0.78 to 0.92. The exception was Minnesota Lunar Simulant 1 (MLS-1), which has little or no glassy component. In all cases the epsilon was lower for the less 20 micrometer particles than for larger particles reported earlier. There was considerably more variation in the lunar simulant reflectance in the solar spectral range (250 to 2500 nanometers) than in the thermal infrared. As expected, the lunar highlands simulants were more reflective in this wavelength range than the lunar mare simulants. The integrated solar absorptance (alpha) of the simulants ranged from 0.39 to 0.75. This is lower than values reported earlier for larger particles of the same simulants (0.41 to 0.82), and for representative mare and highlands lunar soils (0.74 to 0.91). Since the alpha of some mare simulants more closely matched that of highlands lunar soils, it is recommended that and values be the criteria for choosing a simulant for assessing the effects of dust on thermal control surfaces, rather than whether a simulant has been formulated as a highlands or a mare simulant.
Gaier, James R.↗
Creep response of the lunar crust in mare regions from an analysis of crater deformation
The settling trends of 318 lunar mare craters are compared with predictions of numerical finite-element models in order to determine the creep response of the upper lunar mare crust. No settling is evident in craters smaller than 5 km in diameter. Settling rates of larger craters increase as function of crater size in a manner suggesting a nonlinear lunar creep response corresponding to the power law epsilon = 8.3 x 10 to the minus 34th sigma squared where epsilon is the strain rate and sigma is the differential stress. However, the observed nonlinearity is probably an apparent nonlinearity resulting from the temperature-induced viscosity decrease with depth due to a lunar crustal temperature gradient of 3 C/km and a creep activation energy of 20 kcal/mole. It is concluded that creep in the lunar medium is essentially Newtonian, and that the effective viscosity of the upper lunar mare is (1.6 plus or minus 0.3) x 10 to the 25th poise.
Kunze, A. W. G.↗
Hf, Zr, and REE partition coefficients between ilmenite and liquid - Implications for lunar petrogenesis
Partition coefficients (D) between ilmenite and coexisting liquid were determined under near-lunar conditions for Hf, Zr, and REE. Through isotope dilution analysis, ilmenite D values of 0.41 and 0.33 were obtained for Hf and Zr respectively, values significantly lower than those of ilmenite from a kimberlite megacryst. Partition coefficients of REE for the synthesized ilmenite are slightly smaller than those of ilmenite from the kimberlite megacryst, and the lunar (Lu) partition coefficient is 0.056. These results suggest that ilmenite was significant in the lunar-Hf evolution of lunar mare basalts. Using lunar and Hf D values for ilmenite, the Lu-Hf evolution of lunar cumulates and the coexisting magma was examined for various crystallization sequences. The Lu-Hf variation trend of most high-Ti mare basalts is explained by a small degree of partial cumulate melting, though a higher degree is required to explain the variation of very low-Ti basalts, green glass, and Apollo 12 low-Ti basalts. Apollo 15 low-Ti basalts may require chromite crystallization as well.
Nakamura, Y.↗
Glass fiber processing for the Moon/Mars program: Center director's discretionary fund final report
Glass fiber has been produced from two lunar soil simulants. These two materials simulate lunar mare soil and lunar highland soil compositions, respectively. Short fibers containing recrystallized areas were produced from the as-received simulants. Doping the highland simulant with 8 weight percent B2-O3 yielded a material which could be spun continuously. The effects of lunar gravity on glass fiber formation were studied utilizing NASA's KC-135 aircraft. Gravity was found to play a major role in final fiber diameter.
Tucker, D. S.↗
Lunar resources: Oxygen from rocks and soil
The first set of hydrogen reduction experiments to use actual lunar material was recently completed. The sample, 70035, is a coarse-grained vesicular basalt containing 18.46 wt. percent FeO and 12.97 wt. percent TiO2. The mineralogy includes pyroxene, ilmenite, plagioclase, and minor olivine. The sample was crushed to a grain size of less than 500 microns. The crushed basalt was reduced with hydrogen in seven tests at temperatures of 900-1050 C and pressures of 1-10 atm for 30-60 minutes. A capacitance probe, measuring the dew point of the gas stream, was used to follow reaction progress. Experiments were also conducted using a terrestrial basalt similar to some lunar mare samples. Minnesota Lunar Simulant (MLS-1) contains 13.29 wt. percent FeO, 2.96 wt. percent Fe2O3, and 6.56 wt. percent TiO2. The major minerals include plagioclase, pyroxene, olivine, ilmenite, and magnetite. The rock was ground and seived, and experiments were run on the less than 74- and 500-1168-micron fractions. Experiments were also conducted on less than 74-micron powders of olivine, pyroxene, synthetic ilmenite, and TiO2. The terrestrial rock and mineral samples were reduced with flowing hydrogen at 1100 C in a microbalance furnace, with reaction progress monitored by weight loss. Experiments were run at atmospheric pressure for durations of 3-4 hr. Solid samples from both sets of experiments were analyzed by Mossbauer spectroscopy, petrographic microscopy, scanning electron microscopy, tunneling electron microscopy, and x-ray diffraction. Apollo 17 soil 78221 was examined for evidence of natural reduction in the lunar environment. This sample was chosen based on its high maturity level (I sub s/FeO = 93.0). The FeO content is 11.68 wt. percent and the TiO2 content is 3.84 wt. percent. A polished thin section of the 90-150 micron size fraction was analyzed by petrographic microscopy and scanning electron microscopy.
Allen, C. C.↗
Geopolymer Lunar Concrete under Reduced-Pressure Curing and Vacuum Exposure
Geopolymer concrete has emerged as a promising material for constructing habitats, roads, landing pads, and other necessary infrastructure on the lunar surface. Proper in-situ resource utilization (ISRU) is an important aspect of any candidate lunar construction material. Geopolymer concrete is effective at ISRU, as the lunar regolith can be used in the “as found” condition and mixed with an alkaline solution, such as sodium silicate and sodium hydroxide, which could also be mostly produced in-situ. It is envisioned that any concrete material on the lunar surface would be deposited with additive manufacturing techniques and would require a temporary environmental enclosure to mitigate the harsh lunar environment during construction and curing, such as pressure and temperature. Data are needed to set a benchmark for the conditions to be achieved within the deployable environmental enclosure during printing, as well as the resultant material properties after the enclosure is removed. This novel study investigated the influence of reduced atmospheric pressures during the initial curing period on the compressive strength of geopolymer lunar concrete created with two types of lunar regolith simulant. The simulants used in the study represent the regolith for the lunar mare (OPRL2N) and lunar highlands (OPRH2N) regions. Results show a noticeable decline in strength with a reduction in pressure and visible degradation. After the deployable environmental enclosure is removed from the printed segment of infrastructure on the lunar surface, it would then be exposed to the harsh vacuum environment. To understand the importance of curing time required within the deployable enclosure before it is removed, samples were cast and cured for different lengths of time and then exposed to a vacuum chamber capable of achieving 100 mTorr. Control samples were also cast at the same time but left in a standard laboratory environment after curing. The weight change and compressive strength as a function of time in the vacuum chamber were monitored for up to 56 days. The results showed that exposure to the vacuum limits further reaction and strength gain in comparison to control samples left in the laboratory environment. This research is in strong alignment with the 2020 NASA Technology Taxonomy materials area (12.1) and the in-situ resource utilization area (7.1), as it provides necessary data on the geopolymer lunar concrete material to support safe and sustainable options for maintaining a human presence on the Moon.
Moon to Mars Planetary Autonomous Construction Tec↗
Mariner 10 multispectral images of the eastern limb and farside of the moon
We present the first analysis of Mariner 10 multispectral image data for the eastern limb and farside of the moon. A new, rigorous calibration of these data is used that provides results that are consistent with independently derived data sets. From these newly calibrated data, a color ratio image (0.48/0.58 micron) is produced to show relative TiO2 abundances in mare units on the eastern limb and farside of the moon. Our results indicate that the farside lunar mare deposits examined have TiO2 contents that are intermediate to low (2.5 pct TiO2) relative to mare deposits on the nearside. We find no evidence for areally extensive deposits of either very low titanium or high to very high titanium basalts in these portions of the moon. Our findings support previous interpretations that the source regions for lunar mare basalts are laterally heterogeneous. Additionally, examination of highland units reveals a relatively blue region that corresponds with a previously proposed cryptomare, suggesting enhanced TiO2 for this unit. Finally, based on these Mariner 10 data, telescopic spectral data, Galileo multispectral image data, and lunar meteorite analyses we speculate that volcanism in farside mare deposits did not include high titanium basalts.
Robinson, Mark S.↗
A chemical model for generating the sources of mare basalts - Combined equilibrium and fractional crystallization of the lunar magmasphere
A chemical model for simulating the sources of the lunar mare basalts was developed by considering a modified mafic cumulate source formed during the combined equilibrium and fractional crystallization of a lunar magma ocean (LMO). The parameters which influence the initial LMO and its subsequent crystallization are examined, and both trace and major elements are modeled. It is shown that major elements tightly constrain the composition of mare basalt sources and the pathways to their creation. The ability of this LMO model to generate viable mare basalt source regions was tested through a case study involving the high-Ti basalts.
Snyder, Gregory A.↗
Lunar Simulants: JSC-1 is Gone; The Need for New Standardized Root Simulants
A workshop was held in 1991 to evaluate the status of simulated lunar regolith material and to make recommendations on future requirements and production of such material. As an outgrowth of that workshop, a group centered at Johnson Space Center (JSC) teamed with James Carter of the University of Texas at Dallas and Walter Boles of Texas A&M University to produce and distribute a new standardized lunar regolith simulant termed JSC-1. Carter supervised the field collection, shipping, processing, and initial packaging and transportation of JSC-1. Boles stored and distributed JSC-1. About 25 tons were created and distributed to the lunar science and engineer community; none is left for distribution. JSC-1 served an important role in concepts and designs for lunar base and lunar materials processing. Its chemical and physical properties were described by McKay et al., with its geotechnical properties described by Klosky et al.. While other lunar regolith simulants were produced before JSC-1, they were not standardized, and results from tests performed on them were not necessarily equivalent to test results performed on JSC-1. JSC-1 was designed to be chemically, mineralogically, and texturally similar to a mature lunar mare regolith (low titanium). The glass-rich character of JSC-1 (approx. 50%) produced quite different properties compared to other simulants that were made entirely of comminuted crystalline rock, but properties similar to lunar mare near surface regolith.
Carter, James L.↗
Radial structures surrounding lunar basins. ii- orientale and other systems, conclusions
Photographic analysis of radial structures surrounding lunar mare basins
LUNAR PHOTOGRAPH↗
Rubidium-strontium and potassium-argon age of lunar sample 15555.
The lunar mare basalt 15555 from the edge of Hadley Rille has been dated at 3.3 b.y. by both rubidium-strontium and potassium-argon techniques. Age and trace element abundances closely resemble those of the Apollo 12 mare basalts. Data from lunar basalts obtained thus far indicate that they cannot be derived by simple fractionation from a homogeneous source.
Murthy, V. R.↗
Age of an Apollo 15 mare basalt - Lunar crust and mantle evolution.
An internal Rb-Sr isochron for the large basalt boulder 15555 returned from the edge of Hadley rille by the Apollo 15 mission yields an age 3.32 (plus or minus 0.06) b.y. and an initial Sr-88/Sr-86, I = 0.69934 plus or minus 5. This age and I value fall well within the range obtained for the Apollo 12 basalts from the Ocean of Storms and may indicate that extensive lava flows occurred at 3.3 b.y. over widespread areas of the moon. The Sr composition of the anorthosite 15415 is as low as that of plagioclase extracted from the Apollo 11 low K rocks. The initial Sr composition of 15415 for an assumed age of 3.3 to 4.6 b.y. is extremely primitive and provides further evidence for an extremely short formation interval of a nonchondritic moon with respect to an origin in time defined by BABI.
Wasserburg, G. J.↗
Lunar volcanism: Mare ridges and sinuous rilles, part P
Additional evidence of the volcanic origin of mare ridges and sinuous rilles is provided by near-terminator photography of the Herigonius Rille area (12 deg S 37 deg W) northeast of Gassendi Crater. A possible genetic relationship between ridges and rilles is illustrated. From the figure, the following relationships are evident. (1) The most prominent rille crosses several ridges without distortion, which indicates that the mare ridges did not form after the sinuous rilles. (2) The rilles could not have formed by flow up and over the ridges. (3) The rilles extend from their widest ends toward distinctly lower elevations, and the largest one branches both north and south from the vent area. Elevations are evident in stereographic views that clearly indicate the local slopes. (4) The wider end of each rille is marked by an elongate vent (?) near the summit of the mare ridge from which the rille appears to issue. (5) The two most prominent rilles join south of the vent area and continue southward for more than 130 km.
Young, R. A.↗
Endogenic modification of impact craters on Mercury
The presence of internally modified impact craters on Mercury's surface may be used to evaluate the possibility of Mercurian volcanism. Such craters are similar to the floor-fractured and mare-filled craters observed on the moon. Mariner-10 images show that most such craters occur, as on the moon, near plains-filled basins. Color-ratio images have indicated that some Mercurian craters manifest red plains materials on their floors. These features may be associated with lava analogous to mare basalts in some lunar craters, or with compositionally distinct subsurface material preserved within the impact crater. Several basins manifest photometric contrasts between basin exteriors and basin-filling plains. Dark haloes are observed around some impact craters superimposed on the interior plains. This suggests the excavation of compositionally distinct material. Some possible endogenic features are discerned, despite the poor surface resolution, such as irregular rimless depressions. It is felt that volcanism may have occurred on Mercury, and that in some areas it may be similar to that of the lunar Mare Australe region.
Schultz, P. H.↗
Spectral and multispectral imaging studies of lunar mantled mare deposits
Near-IR reflectance spectra (0.6-2.5 microns) and CCD images in the extended visible range (0.4-1.0 microns) obtained with Earth-based telescopes have been used to investigate the composition and origin of formations in the Schiller-Schickard region of the Moon. Of particular interest are the Schickard light plains, which represent an area of mantled mare basalt, or cryptomare. Here local pre-existing mare basalts were eroded and incorporated into a highlands-rich deposit by eject a from the Orientale Basin. Spectra observations of mature and immature highland and mare surfaces, as well as dark-halo crater materials provide information on the mafic mineralogy of features in the area. Analyses of the '1 micron' absorption band and spectral mixing models indicate that selected spots in the light plains contain on the order of 50 percent mare basalt. CCD image cubes can be used to map the amount of basalt in the light plains and evaluate changes with radial distance from Orientale.
Blewett, D. T.↗
Meteorite Dust and Health - A Novel Approach for Determining Bulk Compositions for Toxicological Assessments of Precious Materials
With the resurgence of human curiosity to explore planetary bodies beyond our own, comes the possibility of health risks associated with the materials covering the surface of these planetary bodies. In order to mitigate these health risks and prepare ourselves for the eventuality of sending humans to other planetary bodies, toxicological evaluations of extraterrestrial materials is imperative (Harrington et al. 2017). Given our close proximity, as well as our increased datasets from various missions (e.g., Apollo, Mars Exploration Rovers, Dawn, etc…), the three most likely candidates for initial human surface exploration are the Moon, Mars, and asteroid 4Vesta. Seven samples, including lunar mare basalt NWA 4734, lunar regolith breccia NWA 7611, martian basalt Tissint, martian regolith breccia NWA 7034, a vestian basalt Berthoud, a vestian regolith breccia NWA 2060, and a terrestrial mid-ocean ridge basalt, were examined for bulk chemistry, mineralogy, geochemical reactivity, and inflammatory potential. In this study, we have taken alliquots from these samples, both the fresh samples and those that underwent iron leaching (Tissint, NWA 7034, NWA 4734, MORB), and performed low pressure, high temperature melting experiments to determine the bulk composition of the materials that were previously examined.
Vander Kaaden, K. E.↗