Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Reflection spectra of NaClO{sub 3}, NaBrO{sub 3}, and LiIO{sub 3} gyrotropic crystals in the vacuum UV region

The reflection spectra in the fundamental-absorption region, 5-25 eV (250-40 nm), of optically active crystals with cubic symmetry (NaClO{sub 3}, NaBrO{sub 3}) and uniaxial optically active crystal (LiIO{sub 3}) have been investigated. It is shown that the reflection spectra of cubic crystals have a similar structure, which is determined by the electronic transitions in the XO{sub 3} group. The comparison of these spectra with the corresponding spectrum of lithium iodide made it possible to determine the type of transition in the spectra of cubic crystals. Using the projection operator method, it was shown that the sign of optical rotation of cubic crystals with symmetry T is independent of the screw axis sign. Possible reasons for the unprecedentedy large optical rotation of lithium iodide crystal in the optical axis direction are considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen Retention in Lithium on Metallic Walls from “In Vacuo” Analysis in LTX and Implications for High-Z Plasma-Facing Components in NSTX-U

The application of lithium to plasma-facing components (PFCs) has long been used as a technique for wall conditioning in magnetic confinement devices to improve plasma performance. Determining the characteristics of PFCs at the time of exposure to the plasma, however, is difficult because they can only be analyzed after venting the vacuum vessel and removing them at the end of an operational period. The Materials Analysis and Particle Probe (MAPP) addresses this problem by enabling PFC samples to be exposed to plasmas, and then withdrawn into an analysis chamber without breaking vacuum. The MAPP system was used to introduce samples that matched the metallic PFCs of the Lithium Tokamak Experiment (LTX). Lithium that was subsequently evaporated onto the walls also covered the MAPP samples, which were then subject to LTX discharges. In vacuo extraction and analysis of the samples indicated that lithium oxide formed on the PFCs, but improved plasma performance persisted in LTX. The reduced recycling this suggests is consistent with separate surface science experiments that demonstrated deuterium retention in the presence of lithium oxide films. Since oxygen decreases the thermal stability of the deuterium in the film, the release of deuterium was observed below the lithium deuteride dissociation temperature. This may explain what occurred when lithium was applied to the surface of the NSTX Liquid Lithium Divertor (LLD). The LLD had segments with individual heaters, and the deuterium-alpha emission was clearly lower in the cooler regions. The plan for NSTX-U is to replace the graphite tiles with high-Z PFCs, and apply lithium to their surfaces with lithium evaporation. Experiments with lithium coatings on such PFCs suggest that deuterium could still be retained if lithium compounds form, but limiting their surface temperatures may be necessary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen retention in lithium on metallic walls from “in vacuo” analysis in LTX and implications for high-Z plasma-facing components in NSTX-U

The application of lithium to plasma-facing components (PFCs) has long been used as a technique for wall conditioning in magnetic confinement devices to improve plasma performance. Determining the characteristics of PFCs at the time of exposure to the plasma, however, is difficult because they can only be analyzed after venting the vacuum vessel and removing them at the end of an operational period. The Materials Analysis and Particle Probe (MAPP) addresses this problem here by enabling PFC samples to be exposed to plasmas, and then withdrawn into an analysis chamber without breaking vacuum. The MAPP system was used to introduce samples that matched the metallic PFCs of the Lithium Tokamak Experiment (LTX). Lithium that was subsequently evaporated onto the walls also covered the MAPP samples, which were then subject to LTX discharges. In vacuo extraction and analysis of the samples indicated that lithium oxide formed on the PFCs, but improved plasma performance persisted in LTX. The reduced recycling this suggests is consistent with separate surface science experiments that demonstrated deuterium retention in the presence of lithium oxide films. Since oxygen decreases the thermal stability of the deuterium in the film, the release of deuterium was observed below the lithium deuteride dissociation temperature. This may explain what occurred when lithium was applied to the surface of the NSTX Liquid Lithium Divertor (LLD). The LLD had segments with individual heaters, and the deuterium-alpha emission was clearly lower in the cooler regions. The plan for NSTX-U is to replace the graphite tiles with high-Z PFCs, and apply lithium to their surfaces with lithium evaporation. Experiments with lithium coatings on such PFCs suggest that deuterium could still be retained if lithium compounds form, but limiting their surface temperatures may be necessary.

42 ENGINEERING↗

Resolving Graphite‐Electrolyte Interphase of Lithium‐Ion Batteries using Air‐Tight Ambient Mass Spectrometry

Abstract The formation of a stable solid electrolyte interphase (SEI) at graphite electrode is necessary for lithium‐ion batteries (LIB) to prevent excessive degradation of electrolytes. Until now, the exact organic composition of SEI has not been decisively determined with lithium ethylene mono‐carbonate (LEMC) being one of the debated components. An air‐tight ambient mass spectrometry (MS) platform is developed to directly characterize the air‐sensitive organic components present in SEI. Ionization occurs via a solvent‐free field‐induced process at atmospheric pressure. Our experimental data, based on tandem MS analysis, revealed LEMC to be the major organic component in SEI. This result resolves a long‐standing mystery surrounding the composition of native SEI in LIB, where no trace of the other debated compound, lithium ethylene dicarbonate, was detected. The energetics of fragmentation of LEMC and the corresponding stabilities of various ionic species detected during the air‐tight ambient MS analysis were calculated using density functional theory (DFT). Our findings confirmed favorable protonation energies and suggested the molecular structures for many of the detected species. Solvent (i. e., ethylene carbonate)‐induced stabilization effects observed during the ionization process were also confirmed by DFT. The reported study encourages the routine use of ambient mass spectrometry to characterize both anodic and cathodic electrodes of all battery types as well as to study other air‐sensitive materials in their native state.

25 ENERGY STORAGE↗

Effect of Aluminum Addition on the Evolution of Microstructure, Crystallographic Texture and Mechanical Properties of Single Phase Hexagonal Close Packed Mg-Li Alloys

In the present investigation, an effort has been made to understand the effect of aluminum addition to α Mg-Li alloys. The corresponding composition Mg-4Li-xAl (x = 0, 2, 4 and 6 wt.%) alloys have been prepared by stir casting route under an argon environment. Extrusion was carried out at 300 °C with the extrusion ratio of 15:1. Significant grain refinement was observed after extrusion. X-ray diffraction-based investigation of the cast and extruded alloys showed the presence of intermetallic compounds such as Mg{sub 17}Al{sub 12} and AlLi in the Al-rich alloys namely, Mg-4Li-xAl (x = 4 and 6 wt.%). These precipitates were also present in the extruded plus annealed samples, indicating the stability of the precipitates at high temperature. The bulk x-ray texture measurement revealed a crystallographic texture where the c-axis of the h.c.p crystals was perpendicular to the extrusion direction (ED) for extruded sample. A texture transition was observed on annealing. The c-axis was oriented parallel to the ED. Mechanical properties of the cast, extruded and extruded plus annealed material illustrate that the addition of Al led to enhancement in hardness, yield strength and ultimate tensile strength.

36 MATERIALS SCIENCE↗

The effects of lithium ions on chemical sequence of alkali-silica reaction

This paper presents the results of the investigation on the effects of Li{sup +} ions on the chemical and physical changes in the cementitious system undergoing alkali-silica reaction (ASR). Specifically, this paper focuses on determining which chemical steps of ASR processes are affected by the presence of Li{sup +} ions in the pore solution in order to provide better understanding of the role of Li{sup +} ions in the mitigation process of ASR. The results presented in this paper strongly support the hypothesis that the Li{sup +} ions facilitate the formation of a physical barrier on the surface of reactive silica, and thus prevent further attack on the reactive sites by hydroxyl ions.

36 MATERIALS SCIENCE↗

Investigation of the Rechargeability of Li-O2 Batteries in Non-aqueous Electrolyte

In order to understand the nature of the limited cycle life and poor energy efficiency associated with the secondary Li-O¬2 batteries the discharge products of primary Li-O2 cells at different depth of discharge (DOD) are systematically analyzed in this work. It is revealed that if discharged to 2.0 V a small amount of Li2O2 coexist with Li2CO3 and RO-(C=O)-OLi) in alkyl carbonate-based electrolyte. Further discharging the air electrodes to below 2.0 V the amount of Li2CO3 and LiRCO3 increases significantly due to the severe electrolyte decomposition. There is no Li2O detected in this alkyl carbonate electrolyte regardless of DOD. It is also found that the alkyl carbonate based electrolyte begins to decompose at 4.0 V during charging under the combined influences from the high surface area carbon, the nickel metal current collector and the oxygen atmosphere. Accordingly the impedance of the Li-O2 cell continues to increase after each discharge and recharge process indicating a repeated plating of insoluble lithium salts on the carbon surface. Therefore the whole carbon electrode becomes completely insulated only after a few cycles and loses the function of providing active tri-phase regions for the Li-oxygen batteries.

25 ENERGY STORAGE↗

The magnetic structure of clinopyroxene-type LiFeGe{sub 2}O{sub 6} and revised data on multiferroic LiFeSi{sub 2}O{sub 6}

The clinopyroxene compounds LiFeSi{sub 2}O{sub 6} and LiFeGe{sub 2}O{sub 6} have been investigated by constant wavelength neutron diffraction at low temperatures and by bulk magnetic measurements. Both compounds are monoclinic, space group P2{sub 1}/c and do not exhibit a change in nuclear symmetry down to 1.4 and 5 K respective. However, they transform to a magnetically ordered state below 20 K. LiFeSi{sub 2}O{sub 6} shows a simple magnetic structure with no indication of an incommensurate modulation. The magnetic space group is P2{sub 1}/c' and the structure is described by a ferromagnetic coupling of spins within the infinite M1 chains of edge-sharing octahedra, while the coupling between these M1 chains is antiferromagnetic. The magnetic phase transition is accompanied by magnetostriction of the lattice when passing through the magnetic phase transition. The magnetic structure of LiFeGe{sub 2}O{sub 6} is different to the silicate: the space group is P2{sub 1}{sup '}/c and the magnetic unit cell doubled along the a-direction. Within the M1 chains spins are coupled antiferromagnetically, while the chain to chain coupling is antiferromagnetic when coupling goes via the GeB tetrahedron and ferromagnetic when it goes via the GeA tetrahedron. - Graphical abstract: Section of the nuclear and magnetic structure of the synthetic clinopyroxene-type compound LiFeGe{sub 2}O{sub 6} displaying the antiferromagnetic coupling of spins within the chains of Fe{sup 3+}O{sub 6} octahedra and the antiferromagnetic (via GeB sites) and ferromagnetic (via GeA sites) coupling between these chains.

36 MATERIALS SCIENCE↗

Synthesis and structural chemistry of La{sub 18}Li{sub 8}Rh{sub 4}MO{sub 39} (M=Ti, Mn, Ru)

Polycrystalline samples of La{sub 18}Li{sub 8}Rh{sub 4}MO{sub 39} (M=Ti, Mn, Ru) have been prepared by a solid-state method and studied by neutron powder diffraction. They are isostructural with La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} and adopt the cubic space group Pm3{sup -bar }n with a {approx}12.22 A. Their structure consists of a La-O framework containing intersecting channels that run along <111>. These channels are occupied by chains made up of alternating, face-sharing trigonal-prismatic and octahedral coordination polyhedra; there are two crystallographically distinct types of octahedral site. The prisms are occupied by Li and the transition metals are disordered over the two octahedral sites. - Graphical abstract: The substitution of Ti, Mn or Ru into La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} results in the loss of the cation ordering seen in the parent compound.

36 MATERIALS SCIENCE↗

On AgRhO{sub 2}, and the new quaternary delafossites AgLi{sub 1/3}M{sub 2/3}O{sub 2}, syntheses and analyses of real structures

Two new quaternary delafossite type oxides with the general formula Ag(Li{sub 1/3}M{sub 2/3})O{sub 2}, M=Rh, Ir, have been synthesized, and their structures characterized. Based on X-ray and electron diffraction analyses the structural similarity with AgRhO{sub 2} delafossite, has been evidenced. The real structures of the quaternary delafossites have been revealed, which has allowed to fully explain the diffuse scattering as observed in X-ray powder diffraction. AgRhO{sub 2} is thermally stable up to 1173 K, the behavior of the two quaternary compounds AgLi{sub 1/3}Rh{sub 2/3}O{sub 2} and AgLi{sub 1/3}Ir{sub 2/3}O{sub 2} is comparable, and they decompose above 950 and 800 K, respectively. AgRhO{sub 2} shows temperature independent paramagnetism, while for the other two an effective magnetic moment of 1.77{mu}{sub B} for Ir, and 1.70{mu}{sub B} for Rh were determined, applying the Curie-Weiss law. All compounds are semiconducting with activation energies of 4.97 kJ mol{sup -1} (AgLi{sub 1/3}Rh{sub 2/3}O{sub 2}), 11.42 kJ mol{sup -1} (AgLi{sub 1/3}Ir{sub 2/3}O{sub 2}) and 17.58 kJ mol{sup -1} (AgRhO{sub 2}). -- graphical abstract: Two new quaternary delafossite type oxides with the general formula Ag(Li{sub 1/3}M{sub 2/3})O{sub 2}, M=Rh, Ir, have been synthesized, and their structures characterized. The real structures of the quaternary delafossites have been revealed, which has allowed to fully explain the diffuse scattering as observed in X-ray powder diffraction. Display Omitted Highlights: {yields}Analysis of the real structures of the Ag(Li{sub 1/3}Rh{sub 2/3})O{sub 2} and Ag(Li{sub 1/3}Ir{sub 2/3})O{sub 2}. {yields} Diffuse scattering has been rationalized by severe disorder in the stacking sequences. {yields} The oxygen atom layer stacking sequence needs to change.

36 MATERIALS SCIENCE↗

Growth behavior of LiMn{sub 2}O{sub 4} particles formed by solid-state reactions in air and water vapor

Morphology control of particles formed during conventional solid-state reactions without any additives is a challenging task. Here, we propose a new strategy to control the morphology of LiMn{sub 2}O{sub 4} particles based on water vapor-induced growth of particles during solid-state reactions. We have investigated the synthesis and microstructural evolution of LiMn{sub 2}O{sub 4} particles in air and water vapor atmospheres as model reactions; LiMn{sub 2}O{sub 4} is used as a low-cost cathode material for lithium-ion batteries. By using spherical MnCO{sub 3} precursor impregnated with LiOH, LiMn{sub 2}O{sub 4} spheres with a hollow structure were obtained in air, while angulated particles with micrometer sizes were formed in water vapor. The pore structure of the particles synthesized in water vapor was found to be affected at temperatures below 700 °C. We also show that the solid-state reaction in water vapor is a simple and valuable method for the large-scale production of particles, where the shape, size, and microstructure can be controlled. - Graphical abstract: This study has demonstrated a new strategy towards achieving morphology control without the use of additives during conventional solid-state reactions by exploiting water vapor-induced particle growth. - Highlights: • A new strategy to control the morphology of LiMn{sub 2}O{sub 4} particles is proposed. • Water vapor-induced particle growth is exploited in solid-state reactions. • The microstructural evolution of LiMn{sub 2}O{sub 4} particles is investigated. • The shape, size and microstructure can be controlled by solid-state reactions.

36 MATERIALS SCIENCE↗

Electrochemical performance of LiFePO{sub 4} nanorods obtained from hydrothermal process

LiFePO{sub 4} is a promising candidate for the use as cathode material in lithium-ion batteries, especially the batteries for hybrid electric vehicles or pure electric vehicles. In this paper, a facile hydrothermal process to obtain the pure and well-crystallized LiFePO{sub 4} nanorods is presented. The phase purity of the powder and valence state of Fe ions were confirmed by high-resolution X-ray diffraction and Moessbauer measurements respectively. Transmission electron microscopy observation revealed uniform rod like shape and a preferred growth along b axis direction for the prepared powder. Electrochemical test showed a good capacity and a stable cycling performance of the nanorods, suggesting a potential for further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LiMn{sub 2}O{sub 4} nanorod arrays: A potential three-dimensional cathode for lithium-ion microbatteries

Highlights: • Self-supported LiMn{sub 2}O{sub 4} nanorod arrays are prepared on the Pt substrates. • LiMn{sub 2}O{sub 4} nanorod array cathode exhibits a large areal capacity of 0.25 mAh cm{sup −2}. • LiMn{sub 2}O{sub 4} nanorod array cathode exhibits good cycle performance and rate capability. • LiMn{sub 2}O{sub 4} nanorod arrays are potential cathodes for 3D microbatteries. - Abstract: Although three-dimensional (3D) microbatteries represent great advantage compared to their two-dimensional counterparts, the fabrication of 3D cathode is still a challenge, which holds back the further development of 3D microbatteries. In this work, we present a novel approach for fabrication of LiMn{sub 2}O{sub 4} nanorod arrays as 3D cathode for microbatteries. α-MnO{sub 2} nanotube arrays are firstly grown on the Pt substrate as the template, and LiMn{sub 2}O{sub 4} nanorod arrays are then prepared by lithiation of α-MnO{sub 2} nanotube arrays in molten salt followed by 800 °C annealing in air. In the half cell test, the 3D LiMn{sub 2}O{sub 4} nanorod arrays exhibit both high gravimetric capacity (∼130 mAh g{sup −1}) and areal capacity (∼0.25 mAh cm{sup −2}), while maintaining good cycling stability and rate capability. The facile synthesis and superior electrochemical performance of the three-dimensional LiMn{sub 2}O{sub 4} cathode make it promising for application in microbatteries.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of substituting iron on structural, thermal and dielectric properties of lithium borate glasses

Highlights: • There is increase in NBOs with iron content. • FTIR spectra supported the results predicted by density. • Glass stability has been examined. • Iron shows “blocking effect” on migration of mobile ions. • Internal Circuit varies with temperature and composition. - Abstract: Glasses with composition xFe{sub 2}O{sub 3}·(30 − x)Li{sub 2}O·70B{sub 2}O{sub 3} (x = 0, 2, 5, 7 and 10 mol%) were prepared via melt-quenching technique and their physical, thermal and dielectric properties are discussed. XRD was carried out to confirm the amorphous nature of prepared glasses. Density (ρ) and molar volume (V{sub m}) were found to increase with increase in Fe{sub 2}O{sub 3} content. Infrared absorption spectra depicted that Fe{sub 2}O{sub 3} is acting as a network modifier. DTA has been carried out to determine glass transition temperature (T{sub g}) and crystallization temperature (T{sub x}). Electrical properties have been studied using impedance spectroscopy and dc conductivity. The dc conductivity decreases and activation energy increases on replacing Li{sup +} ions with Fe{sup 3+}. The impedance measurements reveal that the total conductivity obeys Jonscher’s power law. Study of the equivalent circuit analysis up to a temperature of 523 K shows a significant change in the equivalent circuitry with change in temperature and composition.

36 MATERIALS SCIENCE↗

Rechargable xLi{sub 2}MnO{sub 3}·(1 − x)Li{sub 4/3}Mn{sub 5/3}O{sub 4} electrode nanocomposite material as a modification product of chemical manganese dioxide by lithium additives

Highlights: • Li-ion battery cathode preparation procedure included MnO{sub 2} modification by Li-salts with subsequent heat treatment. • Li{sub 4}Mn{sub 5}O{sub 12}, Li{sub 2}MnO{sub 3,} and Li-rich phases form active nanocomposite cathode. • Heat treatment mode is of crucial importance for rechargeability. • Cathode material capacity is 150 mA h g{sup −1} within 2.5–4.5 V. - Abstract: Relatively simple preparation procedure of rechargeable Li-ion battery cathode material via manganese dioxide treatment with Li-containing additive and subsequent calcination has been demonstrated. X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and atomic force microscopy study were characterisation methods of modification products. Pyrolusite, Li{sub 0.3}MnO{sub 2}, layered Li{sub 2}MnO{sub 3}, and spinel Li{sub 4}Mn{sub 5}O{sub 12} phases were revealed as products of initial ramsdellite phase transformations at temperatures of heat treatment ranging from 360 °C to 600 °C. Optimal temperature of final heat treatment from the point of view of rechargeability and discharge characteristics was 450 °C. Samples heat-treated at 450 °C are characterized by the unique combination of Li{sub 4/3}Mn{sub 5/3}O{sub 4} and Li{sub 2}MnO{sub 3} phase components due to their structural integration, a significant degree of disordering, and sizes of nanocrystallites with Li diffusion path, which is the most favourable for reversibility. The prepared nanocomposite cathode material delivers a capacity of 150 mA h g{sup −1} within 2.5–4.5 V at 0.1 mA discharge.

36 MATERIALS SCIENCE↗

The high electrochemical performance of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} supported by graphene and carbon-nanofibers for advanced Li-ion batteries

Highlights: • The LVP-CG composite was synthesized by combining the CNF and graphene. • The improved electronic conductivity lead to high specific capacity. • The capacity retention of LVP-CG was retained without capacity loss. - Abstract: The intrinsically low electronic conductivity of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} (LVP) is a major drawback to be widely used as cathode materials for Li-ion battery. In this study, we synthesized novel LVP composites combining them with carbon nanofiber (CNF) and graphene with improved electrochemical performance. The specific capacity of LVP/CNF-graphene (LVP-CG) was 207 mAh g{sup −1} at 0.1C between 3.0 and 4.8 V, which is beyond the theoretical capacity of LVP (197 mAh g{sup −1}). Moreover, the LVP-CG composite shows smaller particle size, high surface area, improved electronic kinetic behavior and low resistance in the LVP electrode. Our results demonstrate that novel composite with CNF and graphene can be widely used in other phosphate-based cathode materials for advanced Li-ion batteries.

36 MATERIALS SCIENCE↗

Effect of AlP coating on electrochemical properties of LiMn{sub 2}O{sub 4} cathode material for lithium ion battery

Highlights: • Modified LiMn{sub 2}O{sub 4} surface with AlP successfully. • AlP coating surface modification enhances the cycling stability of LiMn{sub 2}O{sub 4} at both room temperature and 60 °C. • AlP coating surface modification improves the rate capability of LiMn{sub 2}O{sub 4}. - Abstract: AlP-modified LiMn{sub 2}O{sub 4} has been synthesized via a simple chemical deposition method followed by high-temperature heating. The X-ray diffraction patterns, SEM images and Energy Dispersive Spectrometer show the successful surface coating of LiMn{sub 2}O{sub 4} by F-43 m crystal form AlP. AlP-modified LiMn{sub 2}O{sub 4} has a high discharge capacity of 125.7 mAh g{sup −1} with retention of 87% at a current density of 1C between 3.3 V and 4.3 V after 100 cycles at 60 °C, while bare LiMn{sub 2}O{sub 4} has more than 28% capacity loss. At 10 rates, the coated sample delivers capacity of 100 mAh g{sup −1}, which is much higher than bare LiMn{sub 2}O{sub 4}. Based on the EIS (electrochemical impedance spectroscopy) result, AlP coating can effectively inhibit the increase of the charge transfer resistance during charging and discharging cycles.

36 MATERIALS SCIENCE↗

Graphene foam supported LiFePO4 nanosheets composite as advanced cathode for lithium ion batteries

Highlights: • Construct self-supported porous LiFePO{sub 4}/GF composite film. • Porous LiFePO{sub 4}/GF composite film show superior cycling life. • Hierarchical porous nanosheets structure boost fast electron/ion transfer. - Abstract: Smart design of advanced cathode plays a significantly important role for the development of high-performance lithium ion batteries (LIBs). In this work, we synthesized a new kind of LiFePO{sub 4}/Graphene foam (LFP/GF) integrated binder-free cathode via chemical vapor deposition (CVD) + hydrothermal method. The LFP is composed of interconnected LiFePO{sub 4} nanosheets with numerous nanopores of 50–500 nm. High porosity and good adhesion endow LiFePO{sub 4}/GF film superior electrochemical properties with remarkable high-rate capacities, small polarization and stable cycling life. A high-rate capacity of 110 mAh g{sup −1} at 24 C is obtained for the LiFePO{sub 4}/GF composite. Moreover, a high capacity retention of 95% is acquired after 160 cycles. This enhancement is due to the unique integrated porous LiFePO{sub 4} nanosheets and good support of graphene foam providing fast ion/electron transfer. Our work displays a new insight in constructing integrated cathode for application in high-performance LIBs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗