Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Characterization of Uranium-Contaminated Sediments From Beneath A Nuclear Waste Storage Tank From Hanford, Washington: Implications for Contaminant Transport and Fate

The concentration and distribution of uranium (U) in sediment samples from three boreholes recovered near radioactive waste storage tanks at Hanford, Washington State, USA, were determined in detail using bulk and micro-analytical techniques. The source of contamination was a plume that contained an estimated 7000 kg of dissolved U that seeped into the subsurface as a result of an accident that occurred during filling of tank BX-102. The desorption character and kinetics of U were also determined by experiment in order to assess the mobility of U in the vadose zone. Most samples contained too little moisture to obtain quantitative information on pore water compositions. Concentrations of U (and contaminant phosphate—P) in pore waters were therefore estimated by performing 1:1 sediment-to-water extractions and the data indicated concentrations of these elements were above that of uncontaminated “background” sediments. Further extraction of U by 8 N nitric acid indicated that a significant fraction of the total U is relatively immobile and may be sequestered in mobilization-resistant phases. Fine- and coarse-grained samples in sharp contact with one another were sub-sampled for further scrutiny and identification of U reservoirs. Segregation of the samples into their constituent size fractions coupled with microwave-assisted digestion of bulk samples showed that most of the U contamination was sequestered within the fine-grained fraction. Isotope exchange ( 233 U) tests revealed that ~51 to 63% of the U is labile, indicating that the remaining fund of U is locked up in mobilization-resistant phases. Analysis by micro-X-Ray Fluorescence and micro-X-Ray Absorption Near-Edge Spectroscopy (μ-XRF and μ-XANES) showed that U is primarily associated with Ca and is predominately U(VI). The spectra obtained on U-enriched “hot spots” using Time-Resolved Laser-Induced Fluorescence Spectroscopy (TRLIFS) provide strong evidence for uranophane-type [Ca(UO 2 ) 2 (SiO 3 OH) 2 (H 2 O) 5 ] and uranyl phosphate [Ca(UO 2 ) 2 (PO 4 ) 2 (H 2 O) 10-12 ] phases. These data show that disseminated micro-precipitates can form in narrow pore spaces within the finer-grained matrix and that these objects are likely not restricted to lithic fragment environments. Uranium mobility may therefore be curtailed by precipitation of uranyl silicate and phosphate phases, with additional possible influence exerted by capillary barriers. Consequently, equilibrium-based desorption models that predict the concentrations and mobility of U in the subsurface matrix at Hanford are unnecessarily conservative.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Submarine deposits from pumiceous pyroclastic density currents traveling over water: An outstanding example from offshore Montserrat (IODP 340)

Pyroclastic density currents have been observed to both enter the sea, and to travel over water for tens of kilometers. Here, we identified a 1.2-m-thick, stratified pumice lapilli-ash cored at Site U1396 offshore Montserrat (Integrated Ocean Drilling Program [IODP] Expedition 340) as being the first deposit to provide evidence that it was formed by submarine deposition from pumice-rich pyroclastic density currents that traveled above the water surface. The age of the submarine deposit is ca. 4 Ma, and its magma source is similar to those for much younger Soufrière Hills deposits, indicating that the island experienced large-magnitude, sub-aerial caldera-forming explosive eruptions much earlier than recorded in land deposits. The deposit's combined sedimentological characteristics are incompatible with deposition from a submarine eruption, pyroclastic fall over water, or a submarine seafloor-hugging turbidity current derived from a subaerial pyroclastic density current that entered water at the shoreline. The stratified pumice lapilli-ash unit can be subdivided into at least three depositional units, with the lowermost one being clast supported. The unit contains grains in five separate size modes and has a >12 phi range. Particles are chiefly sub-rounded pumice clasts, lithic clasts, crystal fragments, and glass shards. Pumice clasts are very poorly segregated from other particle types, and lithic clasts occur throughout the deposit; fine particles are weakly density graded. We interpret the unit to record multiple closely spaced (< 2 d) hot pyroclastic density currents that flowed over the ocean, releasing pyroclasts onto the water surface, and settling of the various pyroclasts into the water column. Our settling and hot and cold flotation experiments show that waterlogging of pumice clasts at the water surface would have been immediate. The overall poor hydraulic sorting of the deposit resulted from mixing of particles from multiple pulses of vertical settling in the water column, attesting to complex sedimentation. Slow-settling particles were deposited on the seafloor together with faster-descending particles that were delivered at the water surface by subsequent pyroclastic flows. The final sediment pulses were eventually deflected upon their arrival on the seafloor and were deposited in laterally continuous facies. This study emphasizes the interaction between products of explosive volcanism and the ocean and discusses sedimentological complexities and hydrodynamics associated with particle delivery to water.

58 GEOSCIENCES↗

Luna 16 - Relative proportions and petrologic significance of particles in the soil from Mare Fecunditatis.

Some 2380 lithic and vitreous particles from levels A and G of the Luna 16 core-tube sample were classified. The relative proportions of particle types from each of the two layers are reported, and some petrological and mineralogical aspects of the lithic and vitreous components of the lunar regolith are discussed. Possible sources of the particles in the Luna 16 soil are examined.

Reid, J. B., Jr.↗

Rubidium-strontium isotope characteristics of lunar soils.

Evaluation of K, Rb, and Sr concentrations and Sr isotopic composition for hand-picked fractions from the 175- to 1000-micron Apollo 12 fines samples 12032 and 12070 and for two less than 1-mm bulk fines samples, 14163,160 and 14259,21, from Apollo 14 which have model Rb-Sr ages close to 4.6 b.y. The Apollo 14 data indicate the presence of a radiogenic component of 4.6 b.y. model age like the Apollo 12 fines, confirming a very early geochemical differentiation of the moon. Progressively greater enrichment in K and Rb relative to the bulk fines is shown by microbreccia from both samples, ropy brown glass from 12032, and light-grey lithic fragments from 12032. Model Rb-Sr ages, based on a basaltic achondrite initial ratio, are generally close to 4.6 b.y. The microbreccias and ropy brown glass have model ages that are younger but indistinguishable from 4.6 b.y. within analytical error. Light grey lithic fragments from 12032 have a model age of 5.1 b.y. and must have had a multistage Rb/Sr evolution. The data are broadly compatible with two-component mixing models of the Apollo 12 fines. On the basis of modal composition, the microbreccia is considered the major nonbasaltic constituent.

Cliff, R. A.↗

Sedimentology of clastic rocks from the Fra Mauro region of the moon.

A thin-section examination of sixteen clastic rock samples returned by the Apollo 14 mission from the Fra Mauro region of the moon suggests the presence of at least two distinctly different lithologies. Five of the samples (group I) are characterized by an abundant glassy matrix and glass particles and lesser amounts of plagioclase and pyroxene grains, and lithic clasts. The other eleven samples (group II) are relatively fine grained, very poorly sorted, and consist largely of pyroxene, plagioclase, and lithic clasts set in an abundant mineralic matrix. Group I and II lithologies were probably both deposited from impact generated base surges. The differences between them stem not as much from the basic sedimentary processes as from the differences in the magnitude of the events generating the base surges and the resultant difference in available detrital materials.

Lindsay, J. F.↗

Apollo 15 rake sample microbreccias and non-mare rocks: Bulk rock, mineral and glass electron microprobe analyses

Quantitative electron microprobe data of Apollo 15 nonmare rake samples are presented. Bulk analyses of lithic fragments in the nomare rocks (expressed in oxide weight-percent) and the corresponding CIPW molecular norms are given. The mineralogy of the rocks and lithic fragments are also given; structural formulae for complete analyses and molecular end-members for all mineral analyses are included. The mineral analyses include pyroxene, olivine, plagioclase, barian K-feldspar, spinel and ilmenite, cobaltian metallic nickel-iron as well as SiO2-K2O-rich residual glass. Electron micropobe analyses (oxide weight percent) of glasses in loose fines and microbreccia samples and their CIPW molecular norms are presented along with electron microprobe data on bulk, mineral, and matrix glass from chondrules.

Hlava, P. F.↗

Preliminary stratigraphy of the Apollo 15 drill core

The crew of Apollo 15 collected a 242-cm-long core of the regolith developed on the surface of Palus Putredinus (3 deg 39 min 20 sec E, 26 deg 26 min 00 sec N). This core consists of 42 major textural units, which range from a few millimeters to 13 cm thick. The regolith at this site was deposited layer by layer, each layer having been reworked, to some degree, by micrometeorite bombardment. The particle composition of six layers for which samples were obtained varies in a random fashion, thus supporting the heterogeneous, layered model of the regolith. The ratio of lithic fragments derived from the Apennine Front to that derived from the mare surface is about 1:1. This lithic ratio, in a regolith section 3.75 km from the base of the front, is an indication of the efficiency of lateral transport of soil by impact processes and mass wasting.

Heiken, G.↗

Apollo 16 soils - Grain size analyses and petrography

Soils from South Ray Crater, North Ray Crater, and the interray area of Station 10 have a similar provenance, containing breccia fragments of low to medium metamorphic grade and low light/dark lithic fragment ratios; these appear to be characteristic of the Cayley Formation. The primary difference between soils possibly derived from North Ray and South Ray craters is in the agglutinate content. A soil from Stone Mountain (Station 4) is characterized by breccia fragments of medium to high metamorphic grade and a high light/dark lithic fragment ratio; this soil may be derived from the Descartes Formation. Differences between the selenomorphic units, the Descartes and Cayley formations, may be lithologic as well as structural. The mean grain size varies from 84 to 280 microns, and all of the samples are poorly to very poorly sorted. There appears to be a relation between the sorting, grain size, and agglutinate content, with the finer-grained, better sorted soils containing more than 30% agglutinates. 'Shadowed' soils, collected close to large boulders, are similar in all respects to the 'reference' soils collected at least 5 m from the boulders.

Heiken, G. H.↗

Apollo 16 stratigraphy - The ANT hills, the Cayley Plains, and a pre-Imbrian regolith

A total of 645 particles in the 1 to 2 mm size range has been classified in the Apollo 16 soil samples 60602,3, 61242,7, 66042,4, 67602,13, and 69942,13. Five major categories of lithic fragments recognized in these samples include (1) an anorthositic/noritic/troctolitic, or ANT suite, (2) light-matrix breccias, (3) poikiloblastic noritic/anorthositic fragments, (4) spinel-troctolites, and (5) feldspathic basalts. The petrography and phase chemistry of the lithic fragments are discussed along with results of the fragment census and the stratigraphy of the Apollo 16 site.

Taylor, G. J.↗

Comparison of lunar rocks and meteorites: Implications to histories of the moon and parent meteorite bodies

A number of similarities between lunar and meteoritic rocks are reported and suggest that the comparison is essential for a clear understanding of meteorites as probes of the early history of the solar systems: (1) Monomict and polymict breccias occur in lunar rocks, as well as in achondritic and chondritic meteorites, having resulted from complex and repeated impact processes. (2) Chondrules are present in lunar, as well as in a few achondritic and most chondritic meteorites. It is pointed out that because chondrules may form in several different ways and in different environments, a distinction between the different modes of origin and an estimate of their relative abundance is important if their significance as sources of information on the early history of the solar system is to be clearly understood. (3) Lithic fragments are very useful in attempts to understand the pre- and post-impact history of lunar and meteoritic breccias. They vary from little modified (relative to the apparent original texture), to partly or completely melted and recrystallized lithic fragments.

Prinz, M.↗

Petrography and classification of Apollo 17 non-mare rocks with emphasis on samples from the Station 6 boulder

The Apollo-17 nonmare rock collection consists largely of polymict breccias lithified by impact and characterized by a variety of types of lithic clasts, concentrations of siderophile elements that indicate substantial meteoritic contamination, and contents of metallic iron well above those of mare basalts. These materials may be subdivided into two compositional groups, one with 70-80% feldspar and the other with 50-60% feldspar. The high-feldspar group includes two characteristic textures: coarsely poikilitic and granulitic. The low-feldspar group includes (1) fragmental breccias with the most diverse lithic clast populations of all breccias and (2) crystalline breccias with poikilitic and subophitic to micropoikilitic textures containing tabular feldspar, granular textures with anhedral feldspar, and clast-rich ophitic textures containing less euhedral feldspar. In the poikilitic and subophitic to micropoikilitic textures, the clast population is dominated by the high-feldspar lithologies and An(94-47) plagioclase grains, indicating that these more refractory lithologies were abundant in the material from which the less feldspathic crystalline rocks formed.

Simonds, C. H.↗

Descartes Mountains and Cayley Plains - Composition and provenance

Trace element compositions of petrographically characterized 2-4 mm lithic fragments from Apollo 16 soil samples are used to calculate initial REE concentrations in liquids in equilibrium with lunar anorthosites and to discuss the provenance of the Cayley Formation. Lithic fragments may be subdivided into four groups: (1) ANT rocks, (2) K- and SiO2-rich mesostasis-bearing rocks, (3) poikiloblastic rocks, and (4) (spinel) troctolites. Model liquids in equilibrium with essentially monominerallic anorthosites have initial REE concentrations 5-8 times those of chondrites. The REE contents of K- and SiO2-rich mesostasis-bearing rocks and poikiloblastic rocks are dominated by the mesostasis phases. ANT rocks appear to be more abundant in the Descartes Mountains, while poikiloblastic rocks appear to be more abundant in the Cayley Plains. Poikiloblastic rocks have intermediate to high LIL-element concentrations yet the low gamma-ray activity of Mare Orientale implies low LIL-element concentrations. Consequently, it is unlikely that the Cayley Formation is Orientale ejecta. A local origin as ejecta from smaller impacts is a more plausible model for the deposition of the Cayley Formation.

Drake, M. J.↗

Comparison of lunar rocks and meteorites: Implications to histories of the moon and parent meteorite bodies

There are many similarities between lunar samples and stone meteorites. Lunar samples, especially from the highlands, indicate that they have been affected by complex and repeated impact processes. Similar complex and repeated impact processes have also been operative on the achondritic and chondritic meteorites. Similarities between lunar and meteoritic rocks are discussed as follows: (1) Monomict and polymict breccias occur in lunar rocks, as well as in achondritic and chondritic meteorites, having resulted from complex and repeated impact processes; (2) Chondrules are present in lunar meteorites, as well as in a few achondritic and most chondritic meteorites. They apparently crystallized spontaneously from molten highly supercooled droplets which may have formed from impact melts or, perhaps, volcanic processes (as well as from the solar nebula, in the case of meteoritic chondrites); (3) Lithic fragments vary from little modified (relative to the apparent original texture) to partly or completely melted and recrystallized lithic fragments. Their detailed study allows conclusions to be drawn about their parent rock types and their origin, thereby gaining insight into preimpact histories of lunar and meteoritic breccias. There is evidence that cumulate rocks were involved in the early history of both moon and parent meteorite bodies.

Prinz, M.↗

Chemical compositions and possible immiscibility of two silicate melts in 12013

The lunar sample 12013, a complex mixture of gray breccia and black breccia, is described. The gray breccia consists of mostly basaltic and gabbroic lithic clasts as well as plagioclase and pyroxene mineral clasts set in a matrix of smaller clasts and a felsite of granitic composition, while the black breccia is comprised of mostly mineral clasts, some lithic clasts, and felsite blebs enclosed in an aphanitic groundmass of basaltic composition. Textural relationships indicate that the felsite and the black breccia groundmass crystallized from melts which coexisted prior to the final lithification of 12013 but failed to mix. Both the felsite and the black breccia groundmass have extreme enrichments of incompatible elements. The critical feature of their compositions is a 'splitting up' of incompatible element associations so that the highest REE and P concentrations are in the black breccia groundmass, and the highest K, Ba, and Rb concentrations are in the felsite.

Quick, J. E.↗

Green glass vitrophyre 78526 - An impact of very low-Ti mare basalt composition

Rake sample 78526 is an 8.77 g rock consisting primarily of vitrophyric pale green glass with subordinate mineral and lithic relics. Petrographic and compositional evidence leads to the following conclusions: (1) the bulk composition represents that of a mixture formed by impact melting of at least two different textural and compositional varieties of VLT mare basalt that are now present in the rock as lithic relics and a poorly defined low-Ti mare basalt component observed in thin section only in the form of isolated mineral relics; (2) the admixed VLT mare basalts had REE abundances lower than those found in other mare basalts (but probably higher than emerald green glass) and REE patterns showing significant enrichment of the heavy relative to light REE's, suggesting that they were derived by comparatively high degrees of partial melting of a clinopyroxene-rich source region; and (3) the impact melt supercooled to produce the vitrophyre, with rather sharply contrasting textural domains present in the vitrophyre resulting from differences in nucleation kinetics and degrees of supercooling in various portions of the sample.

Warner, R. D.↗

Clast assemblages of possible deep-seated /77517/ and immiscible-melt /77538/ origins in Apollo 17 breccias

Breccia samples 77517 and 77538 are composed of abundant mineral and lithic clasts set in porous, poorly sintered matrices. Clast assemblages in the two rocks are of contrasting composition and origin. Breccia 77517 has Mg-rich olivine and pyroxene and calcic plagioclase clasts, indicating limited, almost exclusively ANT-suite parentage. A significant feature is the presence of an assemblage (aluminous enstatite, forsterite, anorthite, aluminous spinel) corresponding to spinel cataclasite, a rock type of deep-seated (about 60 km) crustal origin. Breccia 77538 contains Fe-rich pyroxene and rather sodic plagioclase clasts, indicative of predominantly KREEP and/or mare derivation. An important feature is the occurrence of high-K and high-Fe lithic clasts whose compositions resemble those of immiscible-melts produced during late-stage magmatic crystallization, and which probably originated via silicate liquid immiscibility in a KREEP or mare basalt magma. Both rocks contain numerous fine-grained breccia clasts which represent material that has been modified by impact processes at or very near the moon's surface.

Warner, R. D.↗

Silicate petrography, classification, and origin of the mesosiderites - Review and new observations

A classification of mesosiderites proposed by Powell (1971) is modified and expanded to include impact melts. A petrographic study of all 20 mesosiderites reveals that most contain a complex assemblage of mineral, lithic, and metal clasts. The occurrence of lithic fragments in most mesosiderites and the subsequent metamorphism of the group indicate that they are highly evolved meteorites. A comparison with inferred lunar analogs indicates that the bulk of the mesosiderites can be considered annealed crystalline matrix breccias and may be meteoritic equivalents of granulitic impactites described by Warner et al. (1977).

Floran, R. J.↗

Stratigraphy and depositional history of the Apollo 17 drill core

Lithologic abundances obtained from modal analyses of a continuous string of polished thin sections indicate that the Apollo 17 deep drill core can be divided into three main zones: An upper zone (0-19 cm depth) characterized by high abundances of agglutinates (30%) and a high ratio of mare to non-mare lithic fragments (less than 0.8); a coarse-grained layer (24-56 cm) rich in fragments of high-Ti mare basalts and mineral fragments derived from them, and poor in agglutinates (6%); and a lower zone (56-285 cm) characterized by variable but generally high agglutinate abundances (25%) and a low ratio of mare to nonmare lithic fragments (0.6). Using observations of the geology of the landing site, the principles of cratering dynamics, and the vast amount of data collected on the core, the following depositional history for the section of regolith sampled by the Apollo 17 drill core: was devised.

Taylor, G. J.↗