Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Franck-Condon factor formulae for astrophysical and other molecules

Simple closed-form, approximate, analytic expressions for Franck-Condon factors are given. They provide reliable estimates for Franck-Condon factor arrays for molecular band systems for which only vibrational-frequency, equilibrium internuclear separation and reduced mass values are known, as is often the case for astrophysically interesting molecules such as CeO, CoH, CrH, CrO, CuH, GeH, LaO, NiH, SnH, and ZnH for band systems of which Franck-Condon arrays have been calculated.

Nicholls, R. W.↗
NASA NTRS1992

Mechanism of Muong Nong-type tektite formation and speculation on the source of Australasian tektites

The source crater of the youngest and largest of the tektite strewnfields, the Australasian strewnfield, has not been located. A number of lines of evidence indicate that the Muong Nong-type tektites, primarily found in Indochina, are more primitive than the much more abundant and widespread splash-form tektites, and are proximal to the source. In this study the spatial distribution of Muong Nong-type tektite sites and chemical character have been used to indicate the approximate location of the source. The variation of Muong Nong-type tektite chemical composition appears to be caused by mixing of two silicate rock end-members and a small amount of limestone, and not by vapor fractionation. The variation in composition is not random, and does not support in situ melting or multiple impact theories. The distribution of both Muong Nong and splash-form tektite sites suggest the source is in a limited area near the southern part of the Thailand-Laos border.

Schnetzler, C. C.↗
NASA NTRS1995

Effect of Nb2O5 and V2O5 addition on the superconducting properties of YBa2Cu3O(y) thin films

The effect of Nb2O5 and V2O5 addition on the superconducting properties and microstructure of YBa2Cu3O(y) has been studied in thin films. Polycrystalline targets for laser ablation were prepared by mixing high purity V2O5 or Nb2O5 powders with a well characterized YBa2Cu3O(y) powder in the range 0 to 4 wt percent by solid state reaction method. Thin films (approximately 1500 A thickness) of the above targets were grown on (100) SrTiO3 (STO) and (100) LaAlO3 (LAO) substrates at 700 C temperature by pulsed laser deposition (PLD) technique. In the case of Nb2O5 addition we have noticed an increase in J(sub c) up to 0.5 wt percent and higher additive concentration (greater than 0.5 wt percent) have degraded the superconducting properties. However, in the case of V2O3 addition, there is an improvement in current density and microstructural properties up to 1 wt percent and the superconducting properties degrade for concentrations greater than 1 wt percent. The best J(sub c) for 0.5 wt percent of Nb2O5 added YBCO thin film is 1.6 x 10(exp 6) A/sq cm and for that of V2O5 added sample is 3.4 x 10(exp 6) A/sq cm at 77 K as compared to the pure YBa2Cu3O(y) (YBCO) film J(sub c) (1.2 x 10(exp 6) A/sq cm) observed on STO substrates. The reason for improvement in J(sub c) and microstructural properties in the case of V2O5 addition could be due to the low melting of V2O5 (690 C) which can act as a very good surfactant during deposition. Over all, we have realized that Nb2O5 addition or V2O5 addition to YBCO have shown significant improvement over the undoped YBa2Cu3O(7-x) films grown under identical conditions.

Srinivas, S.↗
NASA NTRS1995

Shuttle Earth Views, 1994

In this third part of a four-part video compilation of Space Shuttle Earth views, various geographical areas are shown, including both land and water masses. The views cover South America, Asia (North Vietnam, Laos, Cambodia, China, Malaysia, Thailand, Java, various islands, Burma, Philippines, Taiwan, Guam), New Guinea, Australia, Morocco, Southern Europe (Spain, Portugal, Algeria, Italy, Sicily, Greece, Former Republic of Yugoslavia, Tunisia), and parts of the Middle East (Libya, Saudi Arabia, Egypt, Israel, Jordan, Sinai, Cyprus, Lebanon, Iraq), the Pacific Ocean, the Atlantic Ocean, the Indian Ocean, and the Mediterranean, Dead, Coral, Tyrrhenian, Adriatic, Ionian, Red, South China, Mindanao, Arafura, Sulu, Java, and China Seas. Each film clip has a heading that names the shuttle and the geographical location of the footage.

Source record↗
NASA NTRS1998

Tunable Microwave Components for Ku- and K-Band Satellite Communications

The use of conductor/ferroelectric/dielectric thin film multilayer structures for frequency and phase agile components at frequencies at and above the Ku-band will be discussed. Among these components are edge coupled filters, microstripline ring resonators, and phase shifters. These structures were implemented using SrTiO3 (STO) ferroelectric thin films, with gold or YBa2Cu3O7-d (YBCO) high temperature superconducting (HTS) microstrip fines deposited by laser ablation on LaAlO3 (LAO) substrates. The performance of these structures in terms of tunability, operating temperature, frequency, and dc bias will be presented. Because of their small size, light weight, and low loss, these tunable microwave components are being studied very intensely at NASA as well as the commercial communication industry. An assessment of the progress made so far, and the issues yet to be solved for the successful integration of these components into the aforementioned communication systems will be presented.

Miranada, F. A.↗
NASA NTRS1999

Epitaxial Ferroelectric Ba(0.5)Sr(0.5)TiO3 Thin Films for Room-Temperature High-Frequency Tunable Element Applications

Perovskite Ba(0.5)SR(0.5)TiO3 thin films have been synthesized on (001) LaAl03 substrates by pulsed laser ablation. Extensive X-ray diffraction, rocking curve, and pole-figure studies suggest that the films are c-axis oriented and exhibit good in-plane relationship of <100>(sub BSTO)//<100>(sub LAO). Rutherford Backscattering Spectrometry studies indicate that the epitaxial films have excellent crystalline quality with an ion beam minimum yield chi(sub min) Of only 2.6 %. The dielectric property measurements by the interdigital technique at 1 MHz show room temperature values of the relative dielectric constant, epsilon(sub r), and loss tangent, tan(sub delta), of 1430 and 0.007 with no bias, and 960 and 0.001 with 35 V bias, respectively. The obtained data suggest that the as-grown Ba(0.5)SR(0.5)TiO3 films can be used for development of room-temperature high-frequency tunable elements.

Chen, C. L.↗
NASA NTRS1999

Characterization of (Ba(0.5)Sr(0.5)) TiO3 Thin Films for Ku-Band Phase Shifters

The microstructural properties of (Ba(0.5)Sr(0.5)TiO3) (BSTO) thin films (300, 700, and 1400 nm thick) deposited on LaAlO3 (LAO) substrates were characterized using high-resolution x-ray diffractometry. Film crystallinity was the parameter that most directly influenced tunability, and we observed that a) the crystalline quality was highest in the thinnest film and progressively degraded with increasing film thickness; and b) strain at the film/substrate interface was completely relieved via dislocation formation. Paraelectric films such as BSTO offer an attractive means of incorporating low-cost phase shifter circuitry into beam-steerable reflectarray antennas.

Mueller, Carl H.↗
NASA NTRS1998

A K-band Frequency Agile Microstrip Bandpass Filter using a Thin Film HTS/Ferroelectric/dielectric Multilayer Configuration

We report on YBa2Cu3O(7-delta) (YBCO) thin film/SrTiO3 (STO) thin film K-band tunable bandpass filters on LaAlO3 (LAO) dielectric substrates. The 2 pole filter has a center frequency of 19 GHz and a 4% bandwidth. Tunability is achieved through the non-linear dc electric field dependence of the relative dielectric constant of STO(epsilon(sub rSTO). A large tunability ((Delta)f/f(sub 0) = (f(sub Vmax) - f(sub 0)/f(sub 0), where f(sub 0) is the center frequency of the filter at no bias and f(sub Vmax) is the center frequency of the filter at the maximum applied bias) of greater than 10% was obtained in YBCO/STO/LAO microstrip bandpass filters operating below 77 K. A center frequency shift of 2.3 GHz (i.e., a tunability factor of approximately 15%) was obtained at a 400 V bipolar dc bias, and 30 K, with minimal degradation in the insertion loss of the filter. This paper addresses design, fabrication and testing of tunable filters based on STO ferroelectric thin films. The performance of the YBCO/STO/LAO filters is compared to that of gold/STO/LAO counterparts.

Subramanyam, Guru↗
NASA NTRS1999

Polarization Reversal Over Flooded Regions and Applications to Large-Scale Flood Mapping with Spaceborne Scatterometers

We present the polarization reversal in backscatter over flooded land regions, and demonstrate for the first time the utility of spaceborne Ku-band scatterometer for large-scale flood mapping. Scatterometer data were collected over the globe by the NASA Scatterometer (NSCAT) operated at 14 GHz on the Japanese ADEOS spacecraft from September 1996 to June 1997. During this time span, several severe floods occurred. Over most land surface, vertical polarization backscatter (Sigma(sub upsilon(upsilon)) is larger than horizontal polarization backscatter (sigma(sub hh)). Such polarization characteristics is reversed and sigma(sub upsilon(upsilon)) is smaller than sigma(sub hh) over flooded regions, except under a dense forest canopy. The total backscatter from the flooded landscape consists of direct backscatter and boundary-interaction backscatter. The direct term is contributed by direct backscattering from objects protruding above the water surface, and by backscattering from waves on the water surface. The boundary-interaction term is contributed by the forward scattering from the protruding objects and then reflected from the water surface, and also by the forward scattering from these objects after the water-surface reflection. Over flooded regions, the boundary-interaction term is dominant at large incidence angles and the strong water-surface reflection is much larger for horizontal polarization than the vertical one due to the Brewster effect in transverse-magnetic waves. These scattering mechanisms cause the polarization reversal over flooded regions. An example obtained with the Analytic Wave Theory is used to illustrate the scattering mechanisms leading to the polarization reversal. We then demonstrate the utility of spaceborne Ku-band scatterometer for large-scale flood mapping. We process NSCAT data to obtain the polarization ratio sigma(sub hh)/sigma(sub upsilon(upsilon)) with colocated data at incidence angles larger than 40 deg. The results over Asian summer monsoon regions in September-October 1996 indicate flooded areas in many countries such as Bangladesh, India, Lao, Vietnam, Cambodia, and China. Reports documented by the United Nation Department of Humanitarian Affairs (now called UN Office for the Coordination of Humanitarian Affairs) show loss of many lives and severe flood related damages which affected many million people in the corresponding flooded areas. We also map the NSCAT polarization ratio over the same regions in the "dry season" in January 1997 as a reference to confirm our results. Furthermore, we obtain concurrent ocean wind fields also derived from NSCAT data, and Asia topographic data (USGS GTOPO30) to investigate the flooded area. The results show that winds during summer monsoon season blowing inland, which perplex flood problems. Overlaying the topographic map over NSCAT results reveals an excellent correspondence between the confinement of flooded area within the relevant topographic features, which very well illustrates the value of topographic wetness index. Finally, we discuss the applications of future spaceborne scatterometers, including QuikSCAT and Seawinds, for flood mapping over the globe.

Nghiem, Son V.↗
NASA NTRS2000

Life Cycle Testing of Ba(x)Sr(1-x)TiO3 Ferroelectric Thin Films in a Tunable Microwave Device

Thin film ferroelectrics are being studied as candidates for novel tunable microwave components such as tunable filters, tunable oscillators, and phase shifters for applications in phased array antennas. Much work has been done optimizing the ferroelectric material and in producing proof-of-concepts of these components. However, little attention has been given to their reliability. In this study we present our results on the reliability of high quality K-band phase shifters made of Ba(sub x)Sr(sub 1-x)TiO3 (BSTO) ferroelectric thin films (0.5 to 0.75 micrometers thick) on MgO and LAO. The phase shift and insertion loss were measured at 300 K over 104 operation cycles within a 0 to 400 V dc bias range (0 to 40 V/micrometer) at 15, 18, and 22 GHz. Results for these phase shifters indicate that in general there were no appreciable changes in phase shift after 4x10(exp 4) cycles, suggesting that these phase shifters are robust enough to sustain optimal performance under the operating mode typical of fast tracking phased arrays.

Miranda, Felix A.↗
NASA NTRS2001

Fixed-frequency and Frequency-agile (au, HTS) Microstrip Bandstop Filters for L-band Applications

In this work, we report on the performance of a highly selective, compact 1.83 x 2.08 cm(exp 2) (approx. 0.72 x 0.82 in(exp 2) microstrip line bandstop filter of YBa2CU3O(7-delta) (YBCO) on LaAlO3 (LAO) substrate. The filter is designed for a center frequency of 1.623 GHz for a bandwidth at 3 dB from reference baseline of less than 5.15 MHz, and a bandstop rejection of 30 dB or better. The design and optimization of the filter was performed using Zeland's IE3D circuit simulator. The optimized design was used to fabricate gold (Au) and High-Temperature Superconductor (HTS) versions of the filter. We have also studied an electronically tunable version of the same filter. Tunability of the bandstop characteristics is achieved by the integration of a thin film conductor (Au or HTS) and the nonlinear dielectric ferroelectric SrTiO3 in a conductor/ferroelectric/dielectric modified microstrip configuration. The performance of these filters and comparison with the simulated data will be presented.

Saenz, Eileen M.↗
NASA NTRS2004

Cloud-Aerosol Interaction and Its Impact on the Onset of the East Asian Summer Monsoon

Effect of aerosols from biomass burning on the early development of East Asian monsoon is investigated using various satellites and in situ observations including TOMS Aerosol Index (AI). GPCP precipitation, ISCCP cloud cover, and GISS surface air temperature. Based on TRMM fire produce and mean winds fields at 85Omb. we identified the source and interaction regions of aerosols and investigated aerosol-cloud-precipitation characteristics in those regions. During March-April, northern Thailand, Myanmar. and Laos are major source of smoke from the combustion of agricultural waste. Excessive smoke. represented by high AI, is observed especially during dry and cloud-free year. On the other hand. there is no ground source of smoke in the interaction region. The most of aerosols in this area are believed to be transported from the source region. AI is appeared to be correlated with more clouds and less precipitation in interaction region. It suggests that the aerosol-cloud interaction can alter the distribution of cloud and the characteristics of regional hydrology. Aerosol-induced changes in atmospheric stability and associated circulation turns out to be very important to pre-monsoon rainfall pattern in southern China. Prolonged biomass burning is especially effective in changing rainfall pattern during April and May. Results suggest that excessive aerosol transported from source region may intensify pre-monsoon rain band over central China in May and lead to early monsoon onset.

Kim, Kyu-Myong↗
NASA NTRS2005

Assessing Malaria Risks in Greater Mekong Subregion based on Environmental Parameters

At 4,200 km, the Mekong River is the tenth longest river in the world. It directly and indirectly influences the lives of hundreds of millions of inhabitants in its basin. The riparian countries - Thailand, Myanmar, Cambodia, Laos, Vietnam, and a small part of China - form the Greater Mekong Subregion (GMS). This geographical region has the misfortune of being the world's epicenter of falciparum malaria, which is the most severe form of malaria caused by Plasmodium falciparum. Depending on the country, approximately 50 to 90% of all malaria cases are due to this species. In the Malaria Modeling and Surveillance Project, we have been developing techniques to enhance public health s decision capability for malaria risk assessments and controls. The main objectives are: 1) identifying the potential breeding sites for major vector species; 2) implementing a malaria transmission model to identify the key factors that sustain or intensify malaria transmission; and 3) implementing a risk algorithm to predict the occurrence of malaria and its transmission intensity. The potential benefits are: 1) increased warning time for public health organizations to respond to malaria outbreaks; 2) optimized utilization of pesticide and chemoprophylaxis; 3) reduced likelihood of pesticide and drug resistance; and 4) reduced damage to environment. Environmental parameters important to malaria transmission include temperature, relative humidity, precipitation, and vegetation conditions. The NASA Earth science data sets that have been used for malaria surveillance and risk assessment include AVHRR Pathfinder, TRMM, MODIS, NSIPP, and SIESIP. Hindcastings based on these environmental parameters have shown good agreement to epidemiological records. Socioeconomic factors that may influence malaria transmissions will also be incorporated into the predictive models.

Kiang, Richard↗
NASA NTRS2005

Malaria Modeling and Surveillance for the Greater Mekong Subregion

At 4,200 km, the Mekong River is the tenth longest river in the world. It directly and indirectly influences the lives of hundreds of millions of inhabitants in its basin. The riparian countries - Thailand, Myanmar, Cambodia, Laos, Vietnam, and a small part of China - form the Greater Mekong Subregion (GMS). This geographical region has the misfortune of being the world's epicenter of falciparum malaria, which is the most severe form of malaria caused by Plasmodium falciparum. Depending on the country, approximately 50 to 90% of all malaria cases are due to this species. In the Malaria Modeling and Surveillance Project, we have been developing techniques to enhance public health's decision capability for malaria risk assessments and controls. The main objectives are: 1) Identifying the potential breeding sites for major vector species; 2) Implementing a malaria transmission model to identify the key factors that sustain or intensify malaria transmission; and 3) Implementing a risk algorithm to predict the occurrence of malaria and its transmission intensity. The potential benefits are: 1) Increased warning time for public health organizations to respond to malaria outbreaks; 2) Optimized utilization of pesticide and chemoprophylaxis; 3) Reduced likelihood of pesticide and drug resistance; and 4) Reduced damage to environment. Environmental parameters important to malaria transmission include temperature, relative humidity, precipitation, and vegetation conditions. These parameters are extracted from NASA Earth science data sets. Hindcastings based on these environmental parameters have shown good agreement to epidemiological records.

Kiang, Richard↗
NASA NTRS2013

Impact Assessment of Biomass Burning on Air Quality in Southeast and East Asia During BASE-ASIA

A synergy of numerical simulation, ground-based measurement and satellite observation was applied to evaluate the impact of biomass burning originating from Southeast Asia (SE Asia) within the framework of NASA's 2006 Biomass burning Aerosols in Southeast Asia: Smoke Impact Assessment (BASE-ASIA). Biomass burning emissions in the spring of 2006 peaked in MarcheApril when most intense biomass burning occurred in Myanmar, northern Thailand, Laos, and parts of Vietnam and Cambodia. Model performances were reasonably validated by comparing to both satellite and ground-based observations despite overestimation or underestimation occurring in specific regions due to high uncertainties of biomass burning emission. Chemical tracers of particulate K(+), OC concentrations, and OC/EC ratios showed distinct regional characteristics, suggesting biomass burning and local emission dominated the aerosol chemistry. CMAQ modeled aerosol chemical components were underestimated at most circumstances and the converted AOD values from CMAQ were biased low at about a factor of 2, probably due to the underestimation of biomass emissions. Scenario simulation indicated that the impact of biomass burning to the downwind regions spread over a large area via the Asian spring monsoon, which included Southern China, South China Sea, and Taiwan Strait. Comparison of AERONET aerosol optical properties with simulation at multi-sites clearly demonstrated the biomass burning impact via longrange transport. In the source region, the contribution from biomass burning to AOD was estimated to be over 56%. While in the downwind regions, the contribution was still significant within the range of 26%-62%.

biomass burning↗
NASA NTRS2016

Optical Evaluation of Digital Micromirror Devices (DMDs) with UV-Grade Fused Silica, Sapphire, and Magnesium Fluoride Windows and Longterm Reflectance of Bare Devices

Digital micromirror devices (DMDs) are commercial micro-electromechanical systems, consisting of millions of mirrors which can be individually addressed and tilted into one of two states (+/-12deg). These devices were developed to create binary patterns in video projectors, in the visible range. Commercially available DMDs are hermetically sealed and extremely reliable. Recently, DMDs have been identified as an alternative to microshutter arrays for space-based multi-object spectrometers (MOS). Specifically, the MOS at the heart of the proposed Galactic Evolution Spectroscopic Explorer (GESE) uses the DMD as a reprogrammable slit mask. Unfortunately, the protective borosilicate windows limit the use of DMDs in the UV and IR regimes, where the glass has insufficient throughput. In this work, we present our efforts to replace standard DMD windows with custom windows made from UV-grade fused silica, low-absorption optical sapphire (LAOS) and magnesium fluoride (MgF2). We present transmission measurements of the antireflection coated windows and the reflectance of bare (window removed) DMDs. Furthermore, we investigated the long-term stability of the DMD reflectance and experiments for coating DMD active area with a layer of pure aluminum (Al) to boost reflectance performance in the UV spectral range (200−400 nm).

reflectance↗
NASA NTRS2016

Optical Evaluation of DMDs with UV-Grade FS, Sapphire, MgF2 Windows and Reflectance of Bare Devices

Digital Micro-mirror Devices (DMDs) have been identified as an alternative to microshutter arrays for space-based multi-object spectrometers (MOS). Specifically, the MOS at the heart of a proposed Galactic Evolution Spectroscopic Explorer (GESE) that uses the DMD as a reprogrammable slit mask. Unfortunately, the protective borosilicate windows limit the use of DMDs in the UV and IR regimes, where the glass has insufficient throughput. In this work, we present our efforts to replace standard DMD windows with custom windows made from UV-grade fused silica, Low Absorption Optical Sapphire (LAOS) and magnesium fluoride. We present reflectance measurements of the antireflection coated windows and a reflectance study of the DMDs active area (window removed). Furthermore, we investigated the long-term stability of the DMD reflectance and recoating device with fresh Al coatings.

Quijada, Manuel A.↗
NASA NTRS2018

Ground and Satellite Based Observation Datasets for the Lower Mekong River Basin

In ‘Satellite observations and modeling to understand the Lower Mekong River Basin streamflow variability’ [1] hydrological fluxes, meteorological variables, land cover land use maps, and soil characteristics and parameters data were compiled and processed for the Lower Mekong River Basin. In this work, daily streamflow time series data at nine gauges located at five different countries in the Mekong region (Thailand, Laos People׳s Democratic Republic (PDR), Myanmar, Cambodia, and Viet Nam) is presented. Satellite-based daily precipitation and air temperature (minimum & maximum) data is processed and provided over the entire basin as part of the dataset provided in this work. Moreover, land cover land use raster data that contains 18 classes that cover agriculture, urban, range and forests land cover land use classes for the basin is offered. In addition, a soil data that contains physical and chemical characteristics needed by physically based hydrological models to simulate the cycling of water and air is also provided.

Streamflow↗