Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Kansas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Classification and area estimation of land covers in Kansas using ground-gathered and LANDSAT digital data

Ground-gathered data and LANDSAT multispectral scanner (MSS) digital data from 1981 were analyzed to produce a classification of Kansas land areas into specific types called land covers. The land covers included rangeland, forest, residential, commercial/industrial, and various types of water. The analysis produced two outputs: acreage estimates with measures of precision, and map-type or photo products of the classification which can be overlaid on maps at specific scales. State-level acreage estimates were obtained and substate-level land cover classification overlays and estimates were generated for selected geographical areas. These products were found to be of potential use in managing land and water resources.

May, G. A.↗
NASA NTRS1992

Raman Lidar Measurements of Pinatubo Aerosols over Southeastern Kansas During November-december 1991

The eruptions of the Philippine volcano Pinatubo during June 1991 produced large amounts of stratospheric aerosols that could significantly affect earth's climate as well as trigger stratospheric ozone depletion through heterogeneous chemical reactions. Information regarding the physical and optical properties of these aerosols is required to quantify those effects. By measuring both the elastically backscattered signal and the inelastic signal produced by Raman scattering from nitrogen molecules, Raman lidar can provide some of this information. In this presentation we discuss Raman lidar measurements of the scattering ratio, backscattering, extinction, extinction/backscattering ratio, and optical thickness of the Pinatubo aerosols over southeastern Kansas made on 10 nights during November and December, 1991. The Raman lidar developed at GSFC is a trailer-based system which uses an XeF excimer laser to transmit light at 351 nm. The light backscattered by molecules and aerosols at this wavelength is detected as well as Raman scattered light from water vapor, nitrogen, and oxygen molecules. Since background skylights interfere with the detection of the Raman signals the data discussed in this paper were acquired only at night.

Ferrare, R. A.↗
NASA NTRS1992

Raman lidar measurements of Pinatubo aerosols over southeastern Kansas during November-December 1991

Raman lidar measurements over southeastern Kansas of stratospheric aerosols produced by the June 1991 eruptions of Mt. Pinatubo were made on 10 nights during November and December 1991. Both aerosol backscattering and extinction profiles were derived simultaneously from the lidar data since this system detects Raman scattering from nitrogen and oxygen as well as the backscattered light from aerosols and molecules. Aerosols scattering ratios greater than 3(at 351 nm) were measured on several nights. Peak aerosol concentrations were located between 19-22 km and varied significantly from night to night. Aerosol extinction/backscatter ratios computed from the lidar data and averaged over the altitude region of enhanced aerosol scattering between 15-25 km varied between 18-28 sr. Mie computations show these values to be consistent with scattering by aerosol particles with mode radii between 0.3 to 0.5 micron and that the ratios would increase to 40-65 sr at 694 nm. Aerosol optical thicknesses derived from the lidar extinction measurements at 351 nm varied between 0.04 and 0.06.

Ferrare, R. A.↗
NASA NTRS1992

Cloud fraction, layer, and direction of movement results from sky cameras during the FIRE IFO, Coffeyville, Kansas, experiment for the period Nov. 12 through Dec. 9, 1991

Tables and figures are presented which show local site observations of cloud fractions, the number of cloud layers, direction of movement, and precipitation data collected during the FIRE (First ISCCP Regional Experiment) Phase 2 Cirrus Intensive Field Observations (IFO) conducted in Coffeyville, Kansas during November and December, 1991. Selected data are also presented at the times of the TIROS Operational Vertical Sounder (TOVS) satellite overpass. Several major scientific projects have used surface-based observations of clouds to compare directly with those being observed from satellites. Characterizing the physical properties of clouds is extremely useful in obtaining a more accurate analysis of the effect of clouds and their movements on weather and climate. It is the purpose of this paper to report data collected during the FIRE Phase 2 IFO experiment and to provide a brief history of such a surface-based system and the technical information required for recording local cloud parameters.

Gerald C Purgold↗
NASA NTRS1992

Satellite Analyses of Cirrus Cloud Properties During the FIRE Phase 2 Cirrus Intensive Field Observations over Kansas

The First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) Phase II Intensive Field Observations (IFO) were taken over southeastern Kansas between November 13 and December 7,1991, to determine cirrus cloud properties. The observations include in situ microphysical data; surface, aircraft, and satellite remote sensing; and measurements of divergence over meso- and smaller-scale areas using wind profilers. Satellite remote sensing of cloud characteristics is an essential aspect for understanding and predicting the role of clouds in climate variations. The objectives of the satellite cloud analysis during FIRE are to validate cloud property retrievals, develop advanced methods for extracting cloud information from satellite-measured radiances, and provide multiscale cloud data for cloud process studies and for verification of cloud generation models. This paper presents the initial results of cloud property analyses during FIRE-II using Geostationary Operational Environmental Satellite (GOES) data and NOAA Advanced Very High Resolution Radiometer (AVHRR) radiances.

Minnis, Patrick↗
NASA NTRS1994

An Improved Automatic Classification of a Landsat/TM Image from Kansas (FIFE)

This research note shows the results of applying a new massively parallel version of the automatic classification program (AutoClass IV) to a particular Landsat/TM image. The previous results for this image were produced using a "subsampling" technique because of the image size. The new massively parallel version of AutoClass allows the complete image to be classified without "subsampling", thus yielding improved results. The area in question is the FIFE study area in Kansas, and the classes AutoClass found show many interesting subtle variations in types of ground cover. Displays of the spatial distributions of these classes make up the bulk of this report. While the spatial distribution of some of these classes make their interpretation easy, most of the classes require detailed knowledge of the area for their full interpretation. We hope that some who receive this document can help us in understanding these classes. One of the motivations of this exercise was to test the new version of AutoClass (IV) that allows for correlation among the variables within a class. The scatter plots associated with the classes show that this correlation information is important in separating the classes. The fact that the spatial distribution of each of these classes is far from uniform, even though AutoClass was not given information about positions of pixels, shows that the classes are due to real differences in the image.

Kanefsky, Bob↗
NASA NTRS2001

The Almena, Kansas, Tornadic Storm of 3 June 1999: A Long-Lived Supercell with Very Little Cloud-to-Ground Lightning

The visual, radar, and lightning characteristics of a severe thunderstorm that spawned a large F3 tornado near Almena, Kansas, on 3 June 1999 are documented. The storm is interesting in that it transitioned from a low-precipitation to classic supercell, then back to low-precipitation supercell again prior to dissipation after sunset. Remarkably, the storm produced only 17 cloud-to-ground lightning flashes during its 4.5 h lifetime, despite VIL values reaching 95 kg/sq m, reflectivities of 50 dBZ or greater at altitudes of 14 km, and baseball-size hail at the surface. In contrast, total lightning rates inferred from a portable lightning detector during the large tornado were very high, approximately 100/min as expected for a storm of this size and intensity.

McCaul, Eugene W., Jr.↗
NASA NTRSDate not supplied

Relating Land Cover Change to Runoff Distribution Using NASA Earth Observations in Riley County, Kansas

In recent years, Riley County, Kansas experienced high levels of flooding potentially due to changes in land use and impervious surface. To analyze the increase in floods and runoff patterns over time, this study contrasted two methods of curve number (CN) calculation, which estimated runoff from rainfall events, from 2006-2020. The conventional calculation method used a look-up table and tracked land use/land cover change. This method resulted in static tables from various inputs such as soil type, surface imperviousness, slope, and crop phenology to estimate runoff versus infiltration. These tables allowed for phenology specific curve numbers and accounted for various farming techniques but required many inputs and lacked flexibility to include seasonal variations in vegetation. In contrast, the dynamic method is a more modern and simple calculation employing normalized difference vegetation index (NDVI) data from Landsat 5, Landsat 7, and Landsat 8 satellites compiled over the rainy season each year to calculate curve numbers based off seasonal vegetation. This dynamic method allowed for more precise analysis of runoff variability because NDVI is a more accurate, real-time measurement for land cover and it could be calculated with greater temporal detail. The results will allow decision makers to make more informed decisions on resiliency strategies to address future flooding.

Trista Brophy↗
NASA NTRS2022

Wichita Climate II: Quantifying and Mapping Urban Heat to Inform Equitable and Sustainable Urban Planning Initiatives in Wichita, Kansas

Wichita, Kansas is experiencing a host of climate threats, particularly extreme heat manifested through Urban Heat Islands (UHI). Heat is unevenly distributed within cities due to factors such as income inequality, historical discriminatory practices like redlining, and divestment in neighborhoods of color. This leads to less vegetation and more heat-absorbing infrastructure in specific communities. Moreover, adverse effects of heat, including heat-related morbidity and mortality, disproportionately impact populations that experience vulnerability through social inequities and structural discrimination. Heat vulnerability is a combination of the factors of heat exposure, sensitivity, and adaptive capacity, and can be harnessed to guide urban heat interventions. This DEVELOP project partnered with the City of Wichita to understand the spatial distribution and drivers of UHIs and heat vulnerability indicators. The team modeled outcomes of tree cover interventions using Landsat 8’s Thermal Infrared Sensor (TIRS) and Operational Land Imager (OLI), Landsat 9 TIRS-2 and OLI-2, and the International Space Station’s Ecosystem Spaceborne Thermal Radiometer Experiment on the International Space Station (ECOSTRESS) sensor, along with the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Urban Cooling model. The team also leveraged statistical analysis by implementing principal component analysis to develop a heat vulnerability index (HVI) specific to Wichita. Ultimately, the project’s outputs will inform the City of Wichita’s Climate Adaptation and Mitigation Plan, identify priority areas for heat mitigation initiatives, and be used in public-facing communications to educate communities on the impacts of urban heat.

Environmental Justice↗
DOE OSTI2022

Kansas's Clean Energy Jobs Potential Through 2030

According to the U.S. Census Bureau, Kansas had 1,851,812 people in its working population (15 to 64 years of age) in 2019. The graphs below show solar photovoltaic (PV), land-based wind, battery energy storage (BES), and energy efficiency job estimates in 2020, 2025, and 2030. These job estimates do not represent net job creation. Rather, they represent the size of the workforce required to achieve projected national deployment levels of each technology for 2025 and 2030 if the state captures the same proportion of jobs in the sector as it did in 2020.

clean energy↗
DOE OSTI2025

Geothermal Heat Pump Case Study: Greensburg, Kansas, City Hall

Geothermal heat pumps can be great alternatives to air conditioners and furnaces, and require less electricity to run. This case study focuses on Greensburg, Kansas, City Hall and is part of a series: https://www.energy.gov/eere/geothermal/geothermal-heat-pump-case-studies.

case study↗
DOE OSTI2021

Cost-Effectiveness of ANSI/ASHRAE/IES Standard 90.1-2019 for Kansas

This report describes the methodology and results of a state cost-effectiveness analysis of ASHRAE Standard 90.1-2019. Moving to the Standard 90.1-2019 edition from Standard 90.1-2016 is found to be cost-effective for the state. Annual energy cost savings, added construction costs, and life-cycle costs are all described and presented here for various building types and climate zones.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Understanding Building Energy Use in Greater Kansas City: Basic Building Stock Characterization

This report is part of a publication series that focuses on approximately 100 different local geographies, or "clusters." Each report provides commercial and multifamily building characteristic and energy data for a local geography, with the intention of helping policymakers at the city, county and state levels better understand building energy use. Specifically, this report breaks down the building stock in the counties shown in Figure 1 by building type, size, energy consumption, and emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Understanding Commercial Building Energy Use in Greater Kansas City: Building Stock Segmentation for Retrofit Planning

This report is part of the second phase of a publication series focusing on approximately 100 different local geographies, or "clusters." Each report provides characteristic features and energy data for commercial buildings in a specific area to help policy makers at the city, county, and state level better understand building energy use and emissions. This report breaks down the energy consumption and emissions of the building stock in the counties shown in Figure 2 by building type, building size, end use, energy consumption, emissions, and segment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Understanding Multifamily Energy Use in Greater Kansas City: Building Stock Segmentation for Retrofit Planning

This report is an addendum to a publication series that focuses on approximately 100 different local geographies, or "clusters". This addendum expands the report series to include large multifamily building characteristics as well as energy and emission data for each local geography. The intention of this addendum is to help policymakers at the city, county, and state levels better understand building energy use and emissions in large multifamily buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗