Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “KF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Major element chemical compositions of chondrules in unequilibrated chondrites

The chemical compositions (except for metals and sulfides in chondrules) of more than 500 chondrules from unequilibrated E, H, L, LL, and C chondrites were measured using a broad beam of an electron-probe microanalyzer. The compositions of chondrules can be represented by various mixtures of normative compositions of olivine, low-Ca pyroxene, plagioclase, and high-Ca pyroxene with minor amounts of spinel, feldspathoid, SiO2-minerals, etc., indicating that the chondrule precursor materials consisted of aggregates of these minerals. The Al, Na, and K contents of most chondrules reflect the compositions of the ternary feldspar (An-Ab-Kf) of the chondrule precursor materials, and chemical types of chondrules (KF, SP, IP, and CP) are defined on the basis of the atomic proportion of Al, Na, and K.

Ikeda, Y.↗
NASA NTRS1989

Alterations of the in vivo torque-velocity relationship of human skeletal muscle following 30 days exposure to simulated microgravity

The effect of a continuous 30-d-long 6-deg headdown bedrest (BR) on the force output ability of skeletal muscles was investigated in human subjects by measuring peak angle specific torque of the knee extensor (KE) and knee flexor (KF) muscle groups of both limbs during unilateral efforts at four speeds (0.52. 1.74, 2.97, and 4.19 rad/sec) during eccentric action. It was found that, for the KE muscle group, the headdown BR resulted in decreases, by 19 percent on the average, of peak angle specific torque; on the other hand, the strength of the KF muscles was not altered significantly. A post-BR recovery for 30 days was found to restore muscle strength of the KE muscle group to about 92 percent of the pre-BR values. Changes of strength were not affected by the type of speed of muscle action.

Dudley, Gary A.↗
NASA NTRS1989

Effect of lysophosphatidylcholine on the filtration coefficient in intact dog lungs

Lysophosphatidylcholine (lyso-Pc) is a lysophospholipid normally found in low concentrations in the lung. At high concentrations lyso-Pc, instilled into the airways, causes pulmonary edema. The hypothesis was tested that the edema caused by lyso-Pc was due to an increase in pulmonary microvascular membrane permeability. In 11 anesthetized dogs, the left lower lobes (LLL) were continuously weighed while lyso-Pc (20 mM) was instilled into the LLL airways. After 30 min, the microvascular membrane fluid filtration coefficient (Kf) was determined from the relationship between the rate of LLL weight gain and the pulmonary microvascular pressure. Kf was not significantly different between the lyso-Pc-treated lobes vs control lobes. The data do not support the hypothesis that lyso-Pc, instilled into the airways, causes an increase in pulmonary microvascular permeability.

Butler, B. D.↗
NASA NTRS1995

Evaluating and Understanding Parameterized Convective Processes and Their Role in the Development of Mesoscale Precipitation Systems

Research efforts during the first year focused on numerical simulations of two convective systems with the Penn State/NCAR mesoscale model. The first of these systems was tropical cyclone Irma, which occurred in 1987 in Australia's Gulf of Carpentaria during the AMEX field program. Comparison simulations of this system were done with two different convective parameterization schemes (CPS's), the Kain-Fritsch (1993 - KF) and the Betts-Miller (Betts 1986- BM) schemes. The second system was the June 10-11 1985 squall line simulation, which occurred over the Kansas-Oklahoma region during the PRE-STORM experiment. Simulations of this system using the KF scheme were examined in detail.

Fritsch, J. Michael↗
NASA NTRS1996

Evaluating and Understanding Parameterized Convective Processes and Their Role in the Development of Mesoscale Precipitation Systems

Research efforts focused on numerical simulations of two convective systems with the Penn State/NCAR mesoscale model. The first of these systems was tropical cyclone Irma, which occurred in 1987 in Australia's Gulf of Carpentaria during the AMEX field program. Comparison simulations of this system were done with two different convective parameterization schemes (CPS's), the Kain-Fritsch (KF) and the Betts-Miller (BM) schemes. The second system was the June 10-11, 1985 squall line simulation, which occurred over the Kansas-Oklahoma region during the PRE-STORM experiment. Simulations of this system using the KF scheme were examined in detail.

Fritsch, J. Michael↗
NASA NTRS1989

Alterations of the In Vivo Torque-Velocity Relationship of Human Skeletal Muscle Following 30 Days Exposure to Simulated Microgravity

The purpose of this study was to examine the effect of 30 d of 6 deg headdown bedrest (BR) on the in vivo strength of skeletal muscle. Peak angle specific (0.78 rad below horizontal) torque of the knee extensor (KE) and flexor (KF) muscle groups of both limbs was assessed during unilateral efforts at four speeds (0.52, 1.74, 2.97 and 4.19 rad/s) during concentric and at three speeds (0.52, 1.74 and 2.97 rad/s) during eccentric actions. The average decrease (P less than 0.05) of peak angle specific torque directly post-BR for the KE across speeds of concentric and eccentric actions was about 19% (n = 7). Recovery for 30 d following BR markedly improved strength to about 92% (P greater than 0.05) of 'normal'. Strength of the KF was not altered (P greater than 0.05) by BR (about a 6% decrease independent of speed and type of muscle action). Changes of strength were not affected by the type or speed of muscle action. The results indicate that strength of ex-tensor more than of flexor muscle groups of the lower limb is decreased by 30 d of bedrest and that this response does not alter the nature of the in vivo torque-velocity relation.

Dudley, Gary A.↗
NASA NTRS2003

Biogeochemistry of fluoride in a plant-solution system

Fluoride (F-) pollutants can harm plants and the animals feeding on them. However, it is largely unknown how complexing and chelating agents affect F bioavailability. Two studies were conducted that measured F- bioavailability and uptake by rice (Oryza sativa L.). In the first study, rice was grown in solution culture (pH 5.0) with 0, 2, or 4 mM F- as KF to compare the interaction of F- with humic acid (HA) and with a conventional chelating agent, N-hydroxyethylenthylenediaminetriacetic acid (HEDTA). In the second study, F was supplied at 0, 0.5, 1.0, and 2.0 mM KF with an additional 2 mM F- treatment containing solution Ca at 2x (2 mM Ca) the level used in the first study, to test the effect added Ca had on F- availability and uptake. Total biomass was greatest with HEDTA and F- < 1 mM. Leaf and stem F concentrations increased exponentially as solution F- increased linearly, with nearly no F partitioning into the seed. Results suggest that F was taken up as HF0 while F- uptake was likely restricted. Additionally, F- competed with HA for Ca, thus preventing the formation of Ca-HA flocculents. The addition of soluble Ca resulted in the precipitation of CaF2 solids on the root surface, as determined by tissue analysis and energy dispersive X-ray spectroscopy.

NASA Discipline Life Support Systems↗
NASA NTRS2005

An Extension to the Kalman Filter for an Improved Detection of Unknown Behavior

The use of Kalman filter (KF) interferes with fault detection algorithms based on the residual between estimated and measured variables, since the measured values are used to update the estimates. This feedback results in the estimates being pulled closer to the measured values, influencing the residuals in the process. Here we present a fault detection scheme for systems that are being tracked by a KF. Our approach combines an open-loop prediction over an adaptive window and an information-based measure of the deviation of the Kalman estimate from the prediction to improve fault detection.

Benazera, Emmanuel↗
NASA NTRS2010

A Ground-Based Comparison of the Muscle Atrophy Research and Exercise System (MARES) and a Standard Isokinetic Dynamometer

PURPOSE: 1) To compare the test-to-test reliability of Muscle Atrophy Research and Exercise System (MARES) with a standard laboratory isokinetic dynamometer (ISOK DYN) and; 2) to determine if measures of peak torque and total work differ between devices. METHODS: Ten subjects (6M, 4F) completed two trials on both MARES and an ISOK DYN in a counterbalanced order. Peak torque values at 60 deg & 180 deg / s were obtained from five maximal repetitions of knee extension (KE) and knee flexion (KF). Total work at 180 deg / s was determined from the area under the torque vs. displacement curve during twenty maximal repetitions of KE and KF. Reliability of measures within devices was interpreted from the intraclass correlation coefficient (ICC) and compared between devices using the ratio of the within-device standard deviations. Indicators of agreement for the two devices were evaluated from: 1) a calculation of concordance (rho) and; 2) the correlation between the mean of measures versus the delta difference between measures (m u vs delta). RESULTS: For all outcome measures ICCs were high for both the ISOK DYN (0.95-0.99) and MARES (0.90-0.99). However, ratios of the within-device standard deviation were 1.3 to 4.3 times higher on MARES. On average, a wide range (3.3 to 1054 Nm) of differences existed between the values obtained. Only KE peak torque measured at 60 deg & 180 deg / s showed similarities between devices (rho = 0.91 & 0.87; Pearson's r for m u vs delta = -0.22 & -0.37, respectively). CONCLUSION: Although MARES was designed for use in microgravity it was quite reliable during ground-based testing. However, MARES was consistently more variable than an ISOK DYN. Future longitudinal studies evaluating a change in isokinetic peak torque or total work should be limited within one device.

Hackney, K. J.↗
NASA NTRS2021

Improving Surface PM2.5 Forecasts in the United States Using an Ensemble of Chemical Transport Model Outputs: 2. Bias Correction with Satellite Data for Rural Areas

This work serves as the second of a two-part study to improve surface PM2.5 forecasts in the continental U.S. through the integrated use of multi satellite aerosol optical depth (AOD) products (MODIS Terra/Aqua and VIIRS DT/DB), multichemical transport model (CTM) (GEOS-Chem, WRF-Chem, and CMAQ) outputs, and ground observations. In Part I of the study, an ensemble Kalman filter (KF) technique using three CTM outputs and ground observations was developed to correct forecast bias and generate a single best forecast of PM2.5 for next day over non rural areas that have surface PM2.5 measurements in the proximity of 125 km. Here, with AOD data, we extended the bias correction into rural areas where the closest air quality monitoring station is at least 125–300 km away. First, we ensembled all of satellite AOD products to yield the single best AOD. Second, we corrected daily PM2.5 in rural areas from multiple models through the AOD spatial pattern between these areas and non rural areas, referred to as “extended ground truth” or EGT, for the present day. Lastly, we applied the KF technique to reduce the forecast bias for next day using the EGT. Our results find that the ensemble of bias-corrected daily PM2.5 from three CTMs for both today and next day show the best performance. Together, the two-part study develops a multimodel and multi-AOD bias-correction technique that has the potential to improve PM2.5 forecasts in both rural and non rural areas in near real time, and be readily implemented at state levels.

Huanxin Zhang↗
DOE OSTI2021

Multifunctional Separator Allows Stable Cycling of Potassium Metal Anodes and of Potassium Metal Batteries

Here, this is the first report of a multifunctional separator for potassium-metal batteries (KMBs). Here, double-coated tape-cast microscale AlF 3 on polypropylene (AlF 3 @PP) yields state-of-the-art electrochemical performance: symmetric cells are stable after 1000 cycles (2000 h) at 0.5 mA cm –2 and 0.5 mAh cm –2 , with 0.042 V overpotential. Stability is maintained at 5.0 mA cm –2 for 600 cycles (240 h), with 0.138 V overpotential. Postcycled plated surface is dendrite-free, while stripped surface contains smooth solid electrolyte interphase (SEI). Conventional PP cells fail rapidly, with dendrites at plating, and “dead metal” and SEI clumps at stripping. Potassium hexacyanoferrate(III) cathode KMBs with AlF 3 @PP display enhanced capacity retention (91% at 100 cycles vs 58%). AlF 3 partially reacts with K to form an artificial SEI containing KF, AlF 3 , and Al 2 O 3 phases. The AlF 3 @PP promotes complete electrolyte wetting and enhances uptake, improves ion conductivity, and increases ion transference number. The higher of K + transference number is ascribed to the strong interaction between AlF 3 and FSI – anions, as revealed through 19 F NMR. The enhancement in wetting and performance is general, being demonstrated with ester- and ether-based solvents, with K-, Na-, or Li- salts, and with different commercial separators. In full batteries, AlF 3 prevents Fe crossover and cycling-induced cathode pulverization.

NMB↗
DOE OSTI2025

Investigation of Corrosion Behavior of Carbide Phase Strengthened Nickel‐Based Alloy in Molten Fluoride Salt

The corrosion behavior of a high creep strength carbide-phase strengthened Ni-based alloy in molten FLiNaK (LiF-NaF-KF: 46.5-11.5-42 mol%) salt in the temperature range of 700°C–750°C has been investigated as a part of the development of structural alloys for fluoride salt-based molten salt reactors (MSRs). The alloy composition was designed based on Hastelloy-N, but with the goal of improving creep strength. Cr depletion depth, a measure of corrosion, was observed to be single micrometers after several hundred hours of corrosion testing. Sequential corrosion testing involving testing of pre-tested samples in fresh salt coupled with SEM-EDS, scanning transmission electron microscopy (STEM) examinations and thermodynamic and kinetic modeling, suggest that the corrosion rate at the alloy-salt interface is governed by diffusion of elements from the alloy bulk to the surface. The carbide phases in the corrosion-tested sample microstructure were identified to be largely M 6 C-type Mo-rich carbides and MC-type mixed carbides. Atom probe tomography (APT) showed some partitioning of Cr and Ti to the carbide phase and showed the carbide phases to be stable at the salt-facing surface.

Gordon, Ryan [Univ. of Wisconsin, Madison, WI (Uni↗
DOE OSTI2020

Thermal Stability of a Eutectic Mixture of Bis(2,2-dinitropropyl) Acetal and Formal: Part C. Kinetic Compensation Effect

Here, the aging behavior of a eutectic mixture of bis(2,2-dinitropropyl) acetal and formal [called NP here] has been studied in various atmospheres [dry (air or nitrogen) versus wet] at temperatures 70 °C and below. The properties of aged samples were analyzed using Fourier transform infrared (FTIR) spectroscopy, Karl Fischer (KF) titration, liquid chromatography/mass spectrometry (LC/MS), and thermogravimetric analysis (TGA) over a period of three years. The results indicate that at aging temperatures up to 55 °C, the initial rates of water production from nitrous acid (HONO) formation and decomposition into the water, NO, and NO 2 follows a 1st order rate law and the rate constants follow an Arrhenius law as a function of temperature. The activation energies and pre-factors for water and volatiles production yield a single linear kinetic compensation plot, suggesting a common degradation pathway between NP and the various combinations of its constituents. Within a narrow temperature range, around 55 °C, a trace amount of water in NP stabilizes its properties by preventing HONO elimination. When the aging temperature is substantially higher than 55 °C, the nature of the degradation mechanism changes. It is suspected that the degradation products of NO x , water, and HNO 3 serve as catalysts to auto-catalyze (kinetics beyond the 1st order) and further degrade NP. The effect of headspace volume on this auto-catalytic process will be discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Technical and economic evaluation of heat transfer fluids for a TES system integrated to an advanced nuclear reactor

The utilization of thermal energy storage technology has emerged as a potential enhancement for nuclear power plants. Although nuclear energy systems possess the ability to adjust their energy output, prolonged variations in production can impact the plant's overall efficiency and economic viability. However, the nuclear industry can capitalize on thermal energy storage to bolster the power plant's economics by leveraging ancillary services and market hedging strategies. Here this research aims to advance the development of thermal energy storage for advanced nuclear reactors by assessing the thermophysical properties of various heat transfer fluids, including FLiNaK, KCl-MgCl 2 , LiCl-KCl, (LiNaK) 2 CO 3 , NaF-ZrF 4 , and KF-ZrF 4 , at temperatures ranging from 500 to 900oC. The assessment is conducted based on thermophysical correlations established in previous studies and employs figures of merit as a metric to evaluate the heat transfer performance of different salt candidates. Additionally, a cost analysis is conducted to provide an idea of the potential cost associated with each salt candidate.

25 ENERGY STORAGE↗
DOE OSTI2023

Thermodynamic modeling with uncertainty quantification using the modified quasichemical model in quadruplet approximation: Implementation into PyCalphad and ESPEI

The modified quasichemical model in the quadruplet approximation (MQMQA) considers the first- and the second-nearest-neighbor coordination and interactions, particularly useful in describing short-range ordering (SRO) in complex liquids such as molten salts, slag in metal processing, and electrolytic solutions. Here, the present work implements the MQMQA into the Python based open-source software PyCalphad for thermodynamic calculations. This endeavor facilitates the development of MQMQA-based thermodynamic database with uncertainty quantification (UQ) and propagation (UP) using the open-source software ESPEI. A new database structure based on Extensible Markup Language (XML) is proposed for ESPEI evaluation of MQMQA model parameters. Using the KF-NiF 2 , KCl-NaCl-MgCl 2 , and CaCl 2 -CaF 2 -LiCl-LiF salt systems as examples, we demonstrate the successful implementation of MQMQA in PyCalphad through thermodynamic calculations of Gibbs energy, equilibrium quadruplet fractions, and phase diagram, as well as database development with UQ and UP using ESPEI. Furthermore, as an application of the present implementation, both the LiF–TbF 3 and LiF-HoF 3 systems have been modeled by MQMQA for the first time, which are in good agreement with experiments. The present implementation hence offers an open-source capability for performing CALPHAD modeling for complex liquids with SRO using MQMQA plus a new XML database structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A neutron tomography study to visualize fluoride salt (FLiNaK) intrusion in nuclear-grade graphite

Manufactured graphite is a preferred material for in-core components of molten salt reactors and fluoride salt-cooled high-temperature reactors, which are in permanent contact with liquid salts. However, owing to the porous nature of nuclear graphite, under certain conditions, molten salts may intrude graphite's pores and affect graphite's properties and functionality. Therefore, a better understanding of molten salt intrusion (distribution across sample cross section and penetration depth) is needed to assess its effects. Here, in this work, we have demonstrated the use of neutron imaging (computed tomography) in the evaluation of salt penetration and distribution of a wide range of graphite grades with diverse microstructures that have been subjected to FLiNaK (LiF–NaF–KF) intrusion at 750 °C and 5 bar pressure for 12 h. Because of the great neutron attenuation contrast from scattering and adsorption between Li (from FLiNaK) and the graphite matrix, we have obtained direct visualization of FLiNaK salt distribution in the salt-impregnated graphites for the first time. Three-dimensional reconstructed images and cross-sectional concentration profiles demonstrate that salt penetration and density distribution are greatly dependent on the microstructural properties of the graphite grade.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Viewing is understanding: Graphite microstructure effects on infiltrated molten salt distribution revealed by 3D neutron tomography

Molten salt infiltration in the pore network of nuclear graphite may cause unwanted changes to graphite's local structure and mechanical and thermal properties. A detailed and comprehensive understanding of molten salt intrusion (distribution across sample cross section and penetration depth) is needed to assess its effects. Here, in this work, we report on an improved methodology for the use of neutron imaging (computed tomography) to evaluate salt penetration and distribution of a wide range of graphite grades with diverse microstructures. Neutron tomography data were acquired on the same graphite sample before and after salt intrusion; the 3D reconstructed volumes were digitally co-registered and subtracted. The difference in neutron attenuation coefficient represents direct visualization of FLiNaK (LiF–NaF–KF) salt distribution in the salt-impregnated graphite samples. This improved methodology was applied to investigate the effect of exposure times (12 h and 336 h) and of graphite microstructure when exposed to FLiNaK at 750 °C and 3 bar (gauge) pressure, starting from flowing argon at near atmospheric pressure. The results show that medium-grained and fine-grained graphites evolve to equilibrium at significantly different rates: fast salt uptake in medium-grained graphites produces salt deposits throughout the volume of graphite specimens, whereas salt infiltration in fine-grained graphites is much slower and limited to exposed surfaces.

FLiNaK infiltration↗
DOE OSTI2022

Application of the Redlich-Kister expansion for estimating the density of molten fluoride psuedo-ternary salt systems of nuclear industry interest

The development of next-generation molten salt reactors relies on accurate knowledge of the thermophysical properties of the candidate coolant and fueled molten salts. These thermophysical properties include density, viscosity, thermal conductivity, and heat capacity. Because of difficulties in measuring thermophysical properties of molten salts, there are many gaps in the current state of thermophysical property knowledge of these salts, particularly those that contain actinides or beryllium. Therefore, leveraging modeling techniques to estimate unknown molten salt thermophysical properties and guide future experimental measurements has high value for the nuclear industry. Here, the densities of molten fluoride pseudo-ternary salt systems, which are of interest to the nuclear industry, were estimated using Redlich-Kister expansion and Muggianu interpolation techniques. The pseudo-ternary systems considered for estimation in this study were NaF-LiF-ZrF 4 , LiF-BeF 2 -ZrF 4 , LiF-BeF 2 -ThF 4 , NaF-LiF-BeF 2 , NaF-KF-BeF 2 , NaF-ZrF 4 -UF 4 , and NaF-BeF 2 -UF 4 . This Redlich-Kister estimation approach accounts for nonideal mixing behavior based on pseudo-binary subsystem interaction parameters determined from experimentally measured pseudo-binary system density data sets. The Redlich-Kister estimation was compared with the method of additive molar volumes, which assumes ideal mixing. Additionally, the Redlich-Kister approach was used to determine previously unknown binary and ternary interaction parameters based on experimentally measured density data sets for select pseudo-ternary salt systems. The results of this study show improvement in density estimation using the Redlich-Kister approach for all systems considered compared with estimation by additive molar volumes. Furthermore, this analysis allowed for the estimation of nonideal density behavior in experimentally unstudied ZrF 4 -UF 4 and BeF 2 -UF 4 , as well as the quantification of ternary interaction in NaF-LiF-ZrF 4 , NaF-BeF 2 -UF 4 , and NaF-ZrF 4 -UF 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗