Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Jet Surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hydrodynamic computations of high-power laser drives generating metal ejecta jets from surface grooves

Understanding dynamic fragmentation in shock-loaded metals and predicting properties of the resulting ejecta are of considerable importance for both basic and applied science. The nature of material ejection has been shown to change drastically when the free surface melts on compression or release. In this work, we present hydrodynamic simulations of laser-driven microjetting from micron-scale grooves on a tin surface. We study microjet formation across a range of shock strengths from drives that leave the target solid after release to drives that induce shock melting in the target. The shock-state particle velocity (Up) varies from 0.3 to 3 km/s and the shock breakout pressure is 3–120 GPa. The microjet tip velocity is 1–8 km/s and the free-surface velocity varies from 0.1 to 5 km/s. Two tin equations of state are examined: a “soft” model (LEOS 501) where the target melts for U p > 1 km/s and a more detailed multiphase model (SESAME 2161) that melts for U p > 1.4 km/s. We use these two models to examine the influence of phase change and the choice of the material model on microjet formation and evolution. We observe in our computational results that jet formation can be classified into three regimes: a low-energy regime where material strength affects jet formation, a moderate-energy regime dominated by the changing phase of tin material, and a high-energy regime where results are insensitive to the material model and jet formation is described by an idealized steady-jet theory. Using an ensemble of 2D simulations, we show that these trends hold across a wide range of drive energies and groove angles.

36 MATERIALS SCIENCE↗
NASA NTRS1971

A study of the round jet/plane wall flow field

Impingement angles, between the axisymmetric jet axis and the plane wall, from zero to 15 degrees have been examined for nozzle heights of 0.75, 1.0, 1.5 and 2.0 diameters and for: (1) a fully developed pipe flow, and (2) a relatively uniform exit velocity condition. Velocity measurements have been used to define isotach contours and to determine mass, momentum and energy flux values for the near field (within five diameters) of the jet. Surface pressure measurements have been used to define surface pressure forces and jet centerline trajectories. The geometric and flow conditions examined and the interpretation of the results have been motivated by the externally blown flap STOL aircraft application.

Foss, J. F.↗
DOE OSTI2020

Radial Wall Jet Flow Over Sigmoidal Surfaces

Radial wall jet flows across flat smooth surfaces have been studied for decades. These studies show that the radial velocity of these jets decays inversely with distance from the nozzle with modest contribution from friction (Poreh, et al., 1967; Rajaratnam, 1976). However, the extent to which flat surface results apply to curved surfaces remains unclear. In this article we explore the influence of settled particle bed slope on these velocity profiles. We model the step change in thickness as a sigmoidal curve of variable steepness and use conservation of momentum to evaluate the velocity profile. We show that the velocity profile attenuates because of curvature. Next, we evaluate the influence of surface curvature on radial wall jet flow. Jet flows over particle beds often introduce curvature in the particle bed profile but the influence of the developed curvature on the velocity profile has not been explored. Here we develop a solution for steady fixed beds based on conservation of momentum. We find that surface curvature has a significant influence on the velocity decay coefficients and celerity of radial wall jets, provided there is velocity slip in the vicinity of the particle bed interface, which is strictly true for particle surfaces. Conservation of momentum predicts conditions where the forward momentum of the flow is directed completely upward. The solution identifies two new dimensionless groups that determine whether a curved surface is sufficient to block radial flow and force flow vertically.

Surface curvature, jet flow, multiphase flow↗
NASA NTRS1981

A study of real jet effects on the surface pressure distribution induced by a jet in a crossflow

A study of jet exit profile, exit Mach number, swirl and turbulence level on jet-induced loadings for jets exhausting from a surface into a crossflow is presented. The importance of each of these real jet characteristics is assessed using available data. Where adequate surface pressure distribution data are available, a correlation method to predict surface pressure for a jet exhausting from an infinite flat plate is used either to attempt to develop a correlation based on the real jet characteristics or to model the effects of that characteristic. Data comparisons are presented for selected cases. Also, a summary of information on surface pressure distribution data for jet exhausting from flat plates into a subsonic crossflow is presented.

Perkins, S. C., Jr.↗
NASA NTRS1986

Dual rectangular jets from a flat plate in a crossflow

Wind tunnel tests were carried out in order to study the single and dual rectangular crossflow jets injected from a flat plate perpendicular to a free stream. The length-to-width ratio of the jets was 3.97, and the spacing between the center lines was 4.7 times the width of a single jet. Surface pressure distributions were obtained for jet-to-freestream velocity ratios of 2.2 and 4, respectively. The following conclusions are offered on the basis of the experimental results: (1) the downstream extension of the negative pressures is extended to the dual jets in comparison to the single jet; (2) by increasing the jet-to-freestream velocity ratio the downstream extension of negative pressures is reduced, but negative upstream pressures become larger; (3) very high peak negative pressures occur at the front side edges of the rectangular jets compared to round jets. Velocity vector plots in the flowfield of the dual jets are given.

Kavsaoglu, M.↗
DOE OSTI2025

Shock-induced bubble jets: a dual perspective of bubble collapse and interfacial instability theory

Interactions between shock waves and gas bubbles in a liquid can lead to bubble collapse and high-speed liquid jet formation, relevant to biomedical applications such as shock wave lithotripsy and targeted drug delivery. This study reveals a complex interplay between acceleration-induced instabilities that drive jet formation and radial accelerations causing overall bubble collapse under shock wave pressure. Using high-speed synchrotron X-ray phase contrast imaging, the dynamics of micrometre-sized air bubbles interacting with laser-induced underwater shock waves are visualised. These images offer full optical access to phase discontinuities along the X-ray path, including jet formation, its propagation inside the bubble, and penetration through the distal side. Jet formation from laser-induced shock waves is suggested to be an acceleration-driven process. A model predicting jet speed based on the perturbation growth rate of a single-mode Richtmyer–Meshkov instability shows good agreement with experimental data, despite uncertainties in the jet-driving mechanisms. The jet initially follows a linear growth phase, transitioning into a nonlinear regime as it evolves. To capture this transition, a heuristic model bridging the linear and nonlinear growth phases is introduced, also approximating jet shape as a single-mode instability, again matching experimental observations. Upon piercing the distal bubble surface, jets can entrain gas and form a toroidal secondary bubble. Linear scaling laws are identified for the pinch-off time and volume of the ejected bubble relative to the jet’s Weber number, characterising the balance of inertia and surface tension. At low speeds, jets destabilise due to capillary effects, resulting in ligament pinch-off.

Drops and Bubbles: Bubble dynamics↗
NASA NTRS2016

NASA Jet Noise Research

The presentation highlights NASA's jet noise research for 2016. Jet-noise modeling efforts, jet-surface interactions results, acoustic characteristics of multi-stream jets, and N+2 Supersonic Aircraft system studies are presented.

reduction↗
NASA NTRS1994

Morphological changes in the NGC 6251 jet

The giant radio galaxy NGC 6251 is a particularly good object for observational tests of relativistic jet models. Due to its high declination and approximately 0.5 Jy radio nucleus, high-quality Very Long Baseline Interferometry (VLBI) images of the central regions of the source can be made with northern hemisphere arrays. In addition, the large-scale radio morphology strongly suggests that the radio axis lies close to the plane of the sky, so Doppler boosting should be less extreme than in the core-dominated superluminal sources. Earlier 18 cm VLBI observations of NGC 6251 revealed an unexpectedly large jet/counterjet brightness ratio and small transverse motion of a feature in the parsec-scale jet. These early results are difficult to reconcile with the simplest symmetric relativistic jet models. In this paper we present a third-epoch 18 cm VLBI image of the parsec-scale radio jet in NGC 6251, and compare jet morphology over a 5 year time span. The jet shows a minor brightness peak at nearly the same distance from the core as the '25 mas knot' seen in the first- and second-epoch VLBI images. This feature is much less pronounced in the third epoch, and a relatively bright, new knot has appeared approximately 12 mas from the core. If this new component had a constant brightness during the 5 years separating the first and third observing epochs, then it must have moved away from the core with an apparent speed of at least 1.2c (compared with an upper limit of 0.23c for motion of the 25 mas knot). However, we cannot yet rule out a local brightening of the inner jet in favor of a new moving component. We determine a lower limit for the jet/couterjet brightness ratio of 100:1 within 6 mas of the core. We also present a new Very Large Array (VLA) image of the kpc-scale jet with 3 sec resolution, made from data obtained during the VLBI observations. The rate of decrease in jet surface brightness from parsec to kiloparsec scales is similar to jets in known superluminal radio sources.

Jones, Dayton L.↗
NASA NTRS1977

A possible explanation of the mechanism of formation of the equatorial jet on the surface of Jupiter

Formation of the equatorial jet of the Jovian surface was explained as a consequence of the Taylor-Proudman theorem. The asymptotic theory of motion of low viscosity fluids in a rotating spherical shear layer was included. The model shows the straited structure of the Jovian surface as the outflow of convective cells having the shape of axisymmetric rolls extended along the axis of rotation in the meridional direction. Depth of the layer was found to be of the order of 1000 kilometers.

Yavorskaya, I. M.↗
NASA NTRS2014

Flow Separation Control Over a Ramp Using Sweeping Jet Actuators

Flow separation control on an adverse-pressure-gradient ramp model was investigated using various flow-control methods in the NASA Langley 15-Inch Wind Tunnel. The primary flow-control method studied used a sweeping jet actuator system to compare with more classic flow-control techniques such as micro-vortex generators, steady blowing, and steady- and unsteady-vortex generating jets. Surface pressure measurements and a new oilflow visualization technique were used to characterize the effects of these flow-control actuators. The sweeping jet actuators were run in three different modes to produce steady-straight, steady-angled, and unsteady-oscillating jets. It was observed that all of these flow-control methods are effective in controlling the separated flows on the ramp model. The steady-straight jet energizes the boundary layer by momentum addition and was found to be the least effective method for a fixed momentum coefficient. The steady-angled jets achieved better performance than the steady-straight jets because they generate streamwise vortices that energize the boundary layer by mixing high-momentum fluid with near wall low-momentum fluid. The unsteady-oscillating jets achieved the best performance by increasing the pressure recovery and reducing the downstream flow separation. Surface flow visualizations indicated that two out-of-phase counter-rotating vortices are generated per sweeping jet actuator, while one vortex is generated per vortex-generating jets. The extra vortex resulted in increased coverage, more pressure recovery, and reduced flow separation.

Koklu, Mehti↗
NASA NTRS2012

NASA Jet Noise Research

The presentation highlights jet-noise research conducted in the Subsonic Fixed Wing, Supersonics, and Environmentally Responsible Aviation Projects in the Fundamental Aeronautics Program at NASA. The research efforts discussed include NASA's updated Aircraft NOise Prediction Program (ANOPP2), acoustic-analogy-based prediction tools, jet-surface-interaction studies, plasma-actuator investigations, N+2 Supersonics Validation studies, rectangular-jet experiments, twin-jet experiments, and Hybrid Wind Body (HWB) activities.

Henderson, Brenda↗
NASA NTRS2022

Prescribing Stratospheric Chemistry Overestimates Southern Hemisphere Climate Change During Austral Spring in Response to Quadrupled CO2

The interaction of stratospheric chemistry with a changing climate from an abrupt CO2 quadrupling is assessed using the coupled atmosphere–ocean Goddard Earth Observing System Chemistry-Climate Model (GEOSCCM). Two abrupt 4 × CO2 experiments were performed, one with interactive stratospheric chemistry and the other with a prescribed stratospheric chemistry that does not simulate stratospheric ozone response to 4 × CO2. The interactive and prescribed chemistry experiments simulate similar global mean surface temperature change. Nevertheless, interactive chemistry is critical to capture the Southern Hemisphere tropospheric midlatitude jet response to 4 × CO2. When stratospheric ozone response to 4 × CO2 is neglected, GEOSCCM overestimates Southern Hemisphere tropospheric circulation change. This stratospheric chemistry-induced climate impact has large seasonal variability. During the austral spring season September–October–November (SON), prescribed chemistry yields a stronger poleward shift and intensification of the Southern Hemisphere midlatitude tropospheric jet, surface wind stress, and the Southern Ocean meridional overturning circulation than occurs with interactive chemistry. In other seasons interactive and prescribed chemistry have similar effects on the Southern Hemisphere circulation. The seasonality of stratospheric chemistry-induced climate impact is related to the seasonality of Antarctic lower stratospheric ozone response to 4 × CO2. In contrast to this stratospheric ozone response to 4 × CO2, stratospheric ozone recovery from decline of the ozone depleting substances has its largest impact on the Southern Hemisphere tropospheric circulation in austral summer (December–January–February), but no effects in SON. It is found that the different seasonality for these two stratospheric ozone layer change scenarios is related to the different seasonality of tropopause meridional temperature gradient response.

Stratospheric ozone feedback↗
NASA NTRS2016

Testing Installed Propulsion For Shielded Exhaust Configurations

Jet-surface interaction (JSI) can be a significant factor in the exhaust noise of installed propulsion. Tests to further understanding and prediction of the acoustic impacts of JSI have been described. While there were many objectives for the NASA JSI1044 test, the overall objective was to prepare for a 2016 test validating the design of a low-noise, low-boom supersonic commercial airliner. In this paper we explore design requirements for a partial aircraft model to be used in subscale acoustic testing, especially focusing on the amount of shielding surface that must be provided to simulate the acoustic environment between propulsion exhaust system and observer. We document the dual-stream jets, both nozzle and flow conditions, which were tested to extend JSI acoustic modeling from simple single-stream jets to realistic dual-stream exhaust nozzles. Examples of observations found as surface geometry and flow conditions were varied were provided. And we have presented initial measurements of the installation impacts of integrating the propulsion on the airframe for a supersonic airliner with realistic airframe geometries and nozzles.

engine airframe integration↗
NASA NTRS1983

Jet trajectories and surface pressures induced on a body of revolution with various dual jet configurations

A jet in a cross flow is of interest in practical situations including jet-powered VTOL aircraft. Three aspects of the problem have received little prior study. First is the effect of the angle of the jet to the crossflow. Second is the performance of dual-jet configurations. The third item for further study is a jet injected from a body of revolution as opposed to a flat plate. The Test Plan for this work was designed to address these three aspects. The experiments were conducted in the 7 x 10 tunnel at NASA Ames at velocities 14.5 - 35.8 m/sec (47.6 - 117.4 ft/sec). Detailed pressure distributions are presented for single and dual jets over a range of velocity ratios from 3 to 8, spacings from 2 to 6 diameters and injection angles of 90, 75 and 60 degrees. Some flowfield measurements are also presented, and it is shown that a simple analysis is capable of predicting the trajectories of the jets.

Schetz, J. A.↗
NASA NTRS2004

Modeling of Turbulence Effects on Liquid Jet Atomization and Breakup

Recent experimental investigations and physical modeling studies have indicated that turbulence behaviors within a liquid jet have considerable effects on the atomization process. For certain flow regimes, it has been observed that the liquid jet surface is highly turbulent. This turbulence characteristic plays a key role on the breakup of the liquid jet near to the injector exit. Other experiments also showed that the breakup length of the liquid core is sharply shortened as the liquid jet is changed from the laminar to the turbulent flow conditions. In the numerical and physical modeling arena, most of commonly used atomization models do not include the turbulence effect. Limited attempts have been made in modeling the turbulence phenomena on the liquid jet disintegration. The subject correlation and models treat the turbulence either as an only source or a primary driver in the breakup process. This study aims to model the turbulence effect in the atomization process of a cylindrical liquid jet. In the course of this study, two widely used models, Reitz's primary atomization (blob) and Taylor-Analogy-Break (TAB) secondary droplet breakup by O Rourke et al. are examined. Additional terms are derived and implemented appropriately into these two models to account for the turbulence effect on the atomization process. Since this enhancement effort is based on a framework of the two existing atomization models, it is appropriate to denote the two present models as T-blob and T-TAB for the primary and secondary atomization predictions, respectively. In the primary breakup model, the level of the turbulence effect on the liquid breakup depends on the characteristic time scales and the initial flow conditions. This treatment offers a balance of contributions of individual physical phenomena on the liquid breakup process. For the secondary breakup, an addition turbulence force acted on parent drops is modeled and integrated into the TAB governing equation. The drop size formed from this breakup regime is estimated based on the energy balance before and after the breakup occurrence. The turbulence energy is also considered in this process.

Trinh, Huu↗