Results for “Isolation Forest” — Page 4

DOE OSTI2025

Mineral-Associated Organic Matter Concentration Beneath Northern Temperate Trees Varies by Mycorrhizal Type and Leaf Habit

Mycorrhizal fungi are important drivers of soil organic matter dynamics, but it can be difficult to isolate the effects of the fungi themselves from covarying traits of their host trees. For example, many trees with an evergreen leaf habit associate with ectomycorrhizal (ECM) fungi, while many deciduous tree species associate with arbuscular mycorrhizal (AM) fungi. Because leaf habit influences the quantity and quality of organic matter inputs to soil, it is often an important factor in soil carbon and nitrogen dynamics, and thus can mask the effects of mycorrhizal fungi on soil organic matter processes. We evaluated how tree mycorrhizal associations and leaf habit separately influence the amount and composition of mineral-associated organic matter (MAOM) and particulate organic matter (POM) in forest soils in New Hampshire and Vermont, USA. We measured carbon (C) and nitrogen (N) concentrations and C/N ratios of three soil density fractions beneath six tree species that vary in mycorrhizal association and leaf habit. We found lower concentrations of MAOM C and N beneath evergreen vs. deciduous trees, but only for tree species associating with AM fungi. Further, MAOM C/N was higher beneath evergreen trees and beneath trees with ECM fungi rather than AM fungi. Furthermore, these results add to the growing body of support for mycorrhizal fungi as mediators of soil organic matter dynamics, suggesting that the MAOM fraction is more sensitive to leaf habit beneath AM-associated versus ECM-associated trees. Because MAOM decomposition is thought to be less responsive than POM decomposition to changes in soil temperature and moisture, differences in the tendency of AM- and ECM-dominated forests to support MAOM formation and persistence may lead to systematic differences in the response of these forest types to ongoing climate change.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Air classification of forest residue for tissue and ash separation efficiency

The goal of this Case Study was to evaluate the performance of air classification of logging residues toward meeting conversion CMAs for carbon and ash contents, as compared to the static status quo Base Case system in which the residues are first dried and then ground in a hammer mill with a 6 mm screen and fines < 1.18 mm are removed. Also considered were moisture and ash impacts on throughput and Overall Operating Effectiveness (OOE), as well as delivered feedstock cost and minimum fuel selling price (MFSP). Laboratory data on the impacts of fan speed and moisture content on the separation efficiency of soil ash, needles and bark from white wood were received from FCIC Subtask 5.2. Average throughput and energy consumption data were obtained from the Bioenergy Feedstock National User Facility (BFNUF) for the same air classifier. These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Because the Base Case status quo system utilizes drying prior to grinding, we modeled the Case Study with drying prior to air classification and subsequent grinding of the separated white wood to isolate the individual quality and cost impacts of air classification relative to the Base Case system. Key takeaways from this Case Study are that air classification improves the quality of the final material, but increases the production cost, especially when lights are disposed; this becomes a tradeoff between increased conversion yield and the extra cost. Removing material should be done as early in the process as possible. Each operation that occurs prior to removing the material increases the cost of the disposed material and leads to wasted energy expenditures. As processes are included or modified, the impact on monetary and energy cost should be included in the decision process. Identifying alternative uses and the associated value for material that is separated from the feedstock stream will have a significant impact on the delivered cost of the material. Although there was an increase in production cost by adding air classification, there was a resulting benefit to the MFSP when meeting or exceeding all of the conversion CMAs; this was an important finding that should be explored further with FCIC Subtask 8.3 and potentially FCIC Task 6.

09 BIOMASS FUELS↗

DOE OSTI2023

Range wide genetic differentiation in the bull kelp Nereocystis luetkeana with a seascape genetic focus on the Salish Sea

Introduction: In temperate regions, one of the most critical determinants of present range-wide genetic diversity was the Pleistocene climate oscillations, the most recent one created by the last glacial maximum (LGM). This study aimed to describe N. luetkeana genetic structure across its entire range (Alaska to California) and test different models of population connectivity within the Salish Sea. This region was colonized after the LGM and has been under increased disturbance in recent decades. Methods: We utilized microsatellite markers to study N. luetkeana genetic diversity at 53 sites across its range. Using higher sampling density in the Salish Sea, we employed a seascape genetics approach and tested isolation by hydrodynamic transport and environment models. Results: At the species distribution scale, we found four main groups of genetic co-ancestry, Alaska; Washington with Vancouver Island’s outer coast and Juan de Fuca Strait; Washington’s inner Salish Sea; and Oregon with California. The highest allelic richness (AR) levels were found in California, near the trailing range edge, although AR was also high in Alaska. The inner Salish Sea region had the poorest diversity across the species distribution. Nevertheless, a pattern of isolation by hydrodynamic transport and environment was supported in this region. Discussion: The levels of allelic, private allele richness and genetic differentiation suggest that during the LGM, bull kelp had both northern and southern glacial refugia in the Prince of Wales Island-Haida Gwaii region and Central California, respectively. Genetic diversity in Northern California sites seems resilient to recent disturbances, whereas the low levels of genetic diversity in the inner Salish Sea are concerning.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Air Classification of Forest Residue for Tissue and Ash Separation Efficiency

The goal of this Case Study was to evaluate the performance of air classification of logging residues toward meeting conversion CMAs for carbon and ash contents, as compared to the static status quo Base Case system in which the residues are first dried and then ground in a hammer mill with a 6 mm screen and fines less than 1.18 mm are removed. Also considered were moisture and ash impacts on throughput and Overall Operating Effectiveness (OOE), as well as delivered feedstock cost and minimum fuel selling price (MFSP). Laboratory data on the impacts of fan speed and moisture content on the separation efficiency of soil ash, needles and bark from white wood were received from FCIC Subtask 5.2: Preprocessing, High Temperature Conversion Preprocessing (Jordan Klinger and Tiasha Bhattacharjee, INL). Average throughput and energy consumption data were obtained from the Bioenergy Feedstock National User Facility (BFNUF) (Neal Yancey, INL) for the same air classifier. These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Feedstock-Conversion Interface Consortium. Because the Base Case status quo system utilizes drying prior to grinding, we modeled the Case Study with drying prior to air classification and subsequent grinding of the separated white wood to isolate the individual quality and cost impacts of air classification relative to the Base Case system.

CMA↗

DOE OSTI2023

Exploring for Superhot Geothermal Targets in Magmatic Settings: 2022 Field Campaign at Newberry Volcano

This paper presents preliminary results from a subset of work carried out as part of a multinational research project entitled DErisking Exploration for multiple geothermal Plays in magmatic ENvironments (DEEPEN), supported by the U.S. Department of Energy (DOE) and Geothermica, a joint effort by EU member states and associated countries. The DEEPEN project will develop a customized approach to exploration for supercritical and superhot geothermal plays in magmatic systems, which will be applied to two demonstration sites. This paper summarizes field activities carried out at the U.S. demonstration site, Newberry Volcano in central Oregon. The objective of this work effort is to refine the subsurface model of Newberry Volcano, with special focus on deeper zones including the magmatic plumbing system and other key geologic elements. New data collection included gravity and wideband magnetotelluric (MT) surveys, as well as reinstallation of a seismic network. The National Renewable Energy Laboratory (NREL) and Enthalpion Energy LLC (Enthalpion) worked with the Deschutes National Forest Fort Rock District to use a low ground disturbance method of MT deployment to collect MT data inside the caldera and other restricted areas inside the National Volcanic Monument. This opened these areas to geophysical exploration for the first time in decades. Sites along and adjacent to the south rim of the volcano constituted the primary survey objectives. A team from Lawrence Berkeley National Laboratory (LBNL), the U.S. Geological Survey (USGS), and AltaRock also began the process of reinstalling the seismic network from the AltaRock enhanced geothermal system (EGS) demonstration in anticipation of further development activities at the site. The data ingestion, reduction, and analysis phase of the project is ongoing. We are currently processing the MT and gravity data and are developing a new, highly GPU-accelerated, 3D joint MT and gravity inversion to better localize the south rim/south flank conductive target and better understand its relationship to deep heat, fluid sources, and surface extrusive features. Joint inversions, which have not yet been undertaken at Newberry, will allow us to obtain constraints on the geologic model that cannot be determined from each method in isolation, improving our ability to image key geologic features at depth.

geophysics↗

DOE OSTI2025

Vanderwaltozyma urihicola sp. nov., a yeast species isolated from rotting wood and beetles in a Brazilian Amazonian rainforest biome

Five yeast isolates belonging to a candidate for novel species were obtained from rotting wood and the gut of a passalid beetle larva in a site of Amazonian rainforest biome in Brazil. Sequence analysis of the Internal Transcribed Spacer (ITS)-5.8S region and the D1/D2 domains of the large subunit rRNA gene showed that the isolates represent a novel species of the genus Vanderwaltozyma. The closest relative of the novel species is Vanderwaltozyma huisunica. These species differs due to 44 nt substitutions and 21 indels in the sequences of the ITS region, as well as by 15 substitutions and four indels in the sequences of the D1/D2 domains. A phylogenomic analysis of the Vanderwaltozyma species with genomes sequenced showed that this novel species is an outgroup to the other species of this genus. We propose the name Vanderwaltozyma urihicola sp. nov. (CBS 18107T, MycoBank MB 856975) to accommodate these isolates. Furthermore, the species is homothallic, producing one to two ascospores per ascus. The habitat of V. urihicola is rotting wood in the Brazilian Amazonian rainforest biome.

Amazonian Forest↗

DOE OSTI2021

Combined Land Use of Solar Infrastructure and Agriculture for Socioeconomic and Environmental Co-Benefits in the Tropics

Solar photovoltaics (PV) are on the rise even in areas of low solar insolation. However, in developing countries with limited capital, land scarcity, or with geographically isolated agrarian communities, large solar infrastructures are often impractical. In these cases, implementation of low-density PV over existing crops may be required to integrate renewable energy services into rural communities. Here, using Indonesia as a model system, we investigated the land use, energy, greenhouse gas emissions, economic feasibility, and the environmental co-benefits associated with off-grid solar PV when combined with high value crop cultivation. The life cycle analyses indicate that small-scale dual land-use systems are economically viable in certain configurations and have the potential to provide several co-benefits including rural electrification, retrofitting diesel electricity generation, and electricity for processing agricultural products locally. A hypothetical full-density off-grid solar PV for a model village in Indonesia shows that electricity output (1907.5 GJ yr-1) is much higher than the total residential consumption (678 GJ yr-1), highlighting the opportunity to downscale the PV infrastructure by half to lower capital cost, to co-locate crops, and to support secondary income generating activities. Economic analysis shows that the 30-year net present cost of electricity from the half-density co-located PV system (12,257 million IDR) is significantly lower than that of the flat cost of diesel required to generate equivalent electricity (14,702 million IDR). Our analysis provides insights for smarter energy planning by optimizing the efficiency of land use and limiting conversion of agricultural and forested areas for energy production.

agrivoltaics↗

DOE OSTI2026

NMR of Fully and Partially 13 C-Enriched Biomass Enhances Pendent Group Structural Characterization

Traditional solution-state NMR experiments may either fail or yield unsatisfactory results when employing fully- 13 C-labeled biomass due to complications arising from 13 C– 13 C coupling. Constant-time analogs of HSQC experiments mitigate such issues and deliver enhanced sensitivity. A rarely reported CT-HSQC-TOCSY experiment allows the proton coupling network to deliver much of the same value as the parent experiment on unlabeled or 10–15%- 13 C-labeled biomass polymers but with enhanced sensitivity. In the absence of a viable HMBC analog for long-range correlations, a relayed C–C experiment, i.e., via directly bonded 13 C-labeled networks, enables the reliable assignment of coupled carbons, with the added advantage of correlating the more elusive quaternaries. A C–C-FLOPSY experiment takes advantage of fully- 13 C-labeled materials for mapping extensive carbon networks in the complex polymer mixtures inherent in biomass. Various pendent groups (tricin units, cis- and trans-p-coumarates, and p -hydroxybenzoates) that adorn lignins, and the cis- and trans-ferulates on arabinoxylan polysaccharides, are exquisitely revealed in spectra from isolated lignins or whole-cell-wall materials from maize, sorghum, and poplar.

biopolymers↗

DOE OSTI2026

TCAD-Machine Learning Enabled TID Compact Model Development for Commercial SiC MOSFET

We propose a TCAD (Technology Computer Aided Design)-machine learning coupled approach that combines a TCAD tool (Charon), optimization/uncertainty quantification tool (Dakota), surrogate models, and Bayesian learning capabilities. The coupling approach is used for accurate modeling and calibration of total ionizing dose (TID) induced threshold voltage (V th ) shifts in Commercial-Off-The-Shelf (COTS) semiconductor devices and to develop physics-informed TID compact models. This versatile approach is applied to model the TID effect in an exemplar COTS 3.3 kV SiC power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). With the Charon-Dakota coupling, we can determine key device geometry and doping values based on device physics, which are difficult to obtain or not available for COTS devices but important for TCAD simulation; additionally, we can efficiently generate thousands of simulation results in a large parameter space, which makes it possible to develop data-driven surrogate models and perform Bayesian calibration. Utilizing the full tool-coupling approach, we achieve calibrated TCAD simulation models that accurately capture the average TID-induced V th shifts behavior with total doses and V th shifts saturation at high doses as observed in experimental data. More importantly, the calibrated TCAD simulations are obtained with determined TID model parameters (e.g., hole trap density and capture cross section) values that contain well quantified uncertainties. Furthermore, we can isolate and quantify the noises that are not captured by the TCAD models but exist in the measured data due to measurements and devices variabilities. Lastly, the calibrated surrogate models are used to develop physics-informed TID compact models. The method is generalizable to other devices and/or radiation conditions with few modifications and can provide well-determined uncertainties.

COTS↗

DOE OSTI2024

Effects of Rapid Permafrost Thaw on CO2 and CH4 Fluxes in a Warmer and Wetter Future (Final Technical Report)

When ice-rich permafrost thaws, the ground subsides, creating thermokarst landscapes with dramatically different soil conditions and carbon fluxes than the original ecosystem. Roughly 20% of the northern permafrost region is susceptible to thermokarst formation (Olefeldt et al., 2016). Thermokarst formation is often rapid; tens of meters of permafrost can thaw within a few years (Schuur et al., 2015). In topographically low areas, thermokarst thaw converts boreal forest or tundra dry shrub ecosystems into sedge or Sphagnum moss wetlands (Olefeldt et al., 2016). While this type of landscape transformation releases carbon stored in permafrost into the atmosphere, on longer time scales, it facilitates sequestration of atmospheric carbon in plant biomass because permafrost thaw releases plant-available nutrients and wetlands are highly productive (M. C. Jones et al., 2017). However, wetlands also generate methane, which is a potent greenhouse gas. Methane emissions from thermokarst wetlands can cause these carbon-sequestering systems to have a positive global warming potential (Johansson et al., 2006; Turetsky et al., 2007). Our project objective was to improve Earth System and environmental predictability by advancing understanding of how CO 2 and CH 4 flux in permafrost thaw-induced wetlands (thermokarst) will change in the future as temperatures and climate conditions shift. Northern latitudes are expected to get warmer and wetter (IPCC 2013), and initiation and expansion of thermokarst thaw is expected to increase (Jorgenson et al. 2006; Zhang et al. 2017). Given these expected changes, our work sought to address three broad questions: Q1) How will northern latitude CO2 and CH4 emissions respond to warming temperatures? Q2) What is the impact of precipitation on permafrost thaw and carbon emissions? Q3) How do CO2 and CH4 emissions change as wetlands age after permafrost thaw? To answer these questions, we took both a modeling and measurement approach. Modeling work was conducted with DOE’s Energy Exascale Earth System Model (E3SM) land model (ELM). Empirical work took place in two primary locations. The first was a thermokarst site near Fairbanks, AK. The site is part of the Bonanza Creek Long Term Ecological Research program and is well instrumented (Neumann et al., 2019). The second was an isolated thawing permafrost wetland located on Kenai Peninsula — Brown’s Lake bog (B. M. Jones et al., 2016) — where the current climate is representative of what is expected at higher latitudes in the future. This site provides an ideal opportunity to test our hypotheses about how thermokarst wetland dynamics will respond to future environmental conditions. In addition, the project collaborated with researchers asking similar questions who were collecting measurements in high latitude post-glacial lakes located in collaborators tackling similar questions in Sweden (Stordalen Mire) (Emerson et al., 2021). Project efforts directly aligned with the stated goal of the funding opportunity announcement (FOA), which was “to improve the understanding and representation of terrestrial ecosystems in ways that advance Earth system model parameterizations and capabilities... thereby improving the quality of Earth and environmental model projections and providing the scientific foundation needed to support DOE’s science and energy missions.” Specifically, the project improved sophistication and accuracy of the Energy Exascale Earth System Model (E3SM), which is being developed primarily at DOE National Laboratories to support scientific research and decision-making.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Saccharomycopsis sp. strain UFMG-CM-Y6632 internal transcribed spacer 1, partial sequence; 5.8S ribosomal RNA gene and internal transcribed spacer 2, complete sequence; and large subunit ribosomal RNA gene, partial sequence

Three yeast isolates were obtained from soil and rotting wood samples collected in an Amazonian rainforest biome in Brazil. Comparison of the intergenic spacer 5.8S region and the D1/D2 domains of the large subunit rRNA gene showed that the isolates represent a novel species of the genus Saccharomycopsis. A tree inferred from the D1/D2 sequences placed the novel species near a subclade containing Saccharomycopsis lassenensis, Saccharomycopsis fermentans, Saccharomycopsis javanensis, Saccharomycopsis babjevae, Saccharomycopsis schoenii and Saccharomycopsis oosterbeekiorum, but with low bootstrap support. In terms of sequence divergence, the novel species had the highest identity in the D1/D2 domains with Saccharomycopsis capsularis, from which it differed by 36 substitutions. In contrast, a phylogenomic analysis based on 1061 single-copy orthologs for a smaller set of Saccharomycopsis species whose whole genome sequences are available indicated that the novel species represented by strain UFMG-CM-Y6991 is phylogenetically closer to Saccharomycopsis fodiens and Saccharomycopsis sp. TF2021a (=Saccharomycopsis phalluae). The novel yeast is homothallic and produces asci with one spheroidal ascospore with an equatorial or subequatorial ledge. The name Saccharomycopsis praedatoria sp. nov. is proposed to accommodate the novel species. The holotype of Saccharomycopsis praedatoria is CBS 16589(T). The MycoBank number is MB849369. S. praedatoria was able to kill cells of Saccharomyces cerevisiae by means of penetration with infection pegs, a trait common to most species of Saccharomycopsis.

Amazonian Forest↗

DOE OSTI2022

Saccharomycopsis sp. isolate UFMG-CM-Y6632 large subunit ribosomal RNA gene, partial sequence

Three yeast isolates were obtained from soil and rotting wood samples collected in an Amazonian rainforest biome in Brazil. Comparison of the intergenic spacer 5.8S region and the D1/D2 domains of the large subunit rRNA gene showed that the isolates represent a novel species of the genus Saccharomycopsis. A tree inferred from the D1/D2 sequences placed the novel species near a subclade containing Saccharomycopsis lassenensis, Saccharomycopsis fermentans, Saccharomycopsis javanensis, Saccharomycopsis babjevae, Saccharomycopsis schoenii and Saccharomycopsis oosterbeekiorum, but with low bootstrap support. In terms of sequence divergence, the novel species had the highest identity in the D1/D2 domains with Saccharomycopsis capsularis, from which it differed by 36 substitutions. In contrast, a phylogenomic analysis based on 1061 single-copy orthologs for a smaller set of Saccharomycopsis species whose whole genome sequences are available indicated that the novel species represented by strain UFMG-CM-Y6991 is phylogenetically closer to Saccharomycopsis fodiens and Saccharomycopsis sp. TF2021a (=Saccharomycopsis phalluae). The novel yeast is homothallic and produces asci with one spheroidal ascospore with an equatorial or subequatorial ledge. The name Saccharomycopsis praedatoria sp. nov. is proposed to accommodate the novel species. The holotype of Saccharomycopsis praedatoria is CBS 16589(T). The MycoBank number is MB849369. S. praedatoria was able to kill cells of Saccharomyces cerevisiae by means of penetration with infection pegs, a trait common to most species of Saccharomycopsis.

Amazonian Forest↗

DOE OSTI2023

Saccharomycopsis sp. KB-2023a isolate UFMG-CM-Y6991, whole genome shotgun sequencing project

Three yeast isolates were obtained from soil and rotting wood samples collected in an Amazonian rainforest biome in Brazil. Comparison of the intergenic spacer 5.8S region and the D1/D2 domains of the large subunit rRNA gene showed that the isolates represent a novel species of the genus Saccharomycopsis. A tree inferred from the D1/D2 sequences placed the novel species near a subclade containing Saccharomycopsis lassenensis, Saccharomycopsis fermentans, Saccharomycopsis javanensis, Saccharomycopsis babjevae, Saccharomycopsis schoenii and Saccharomycopsis oosterbeekiorum, but with low bootstrap support. In terms of sequence divergence, the novel species had the highest identity in the D1/D2 domains with Saccharomycopsis capsularis, from which it differed by 36 substitutions. In contrast, a phylogenomic analysis based on 1061 single-copy orthologs for a smaller set of Saccharomycopsis species whose whole genome sequences are available indicated that the novel species represented by strain UFMG-CM-Y6991 is phylogenetically closer to Saccharomycopsis fodiens and Saccharomycopsis sp. TF2021a (=Saccharomycopsis phalluae). The novel yeast is homothallic and produces asci with one spheroidal ascospore with an equatorial or subequatorial ledge. The name Saccharomycopsis praedatoria sp. nov. is proposed to accommodate the novel species. The holotype of Saccharomycopsis praedatoria is CBS 16589(T). The MycoBank number is MB849369. S. praedatoria was able to kill cells of Saccharomyces cerevisiae by means of penetration with infection pegs, a trait common to most species of Saccharomycopsis.

Amazonian Forest↗

DOE OSTI2023

Terrain-Influenced Winds and Fire-Fire Interactions in Wildland Fire Simulations [Dissertation]

Ensemble-based approaches to prescribed fire planning cannot be supported by computational fluid dynamics based models like FIRETEC and the Wildland-Urban Interface Fire Dynamics Simulator (WFDS) because they are too computationally expensive and cannot leverage large eddy simulation approaches like CAWFE and WRF-SFIRE because they have too coarse of resolution. QUIC-Fire was developed to fill this gap but it cannot currently address complex terrain, that is typical for instance in the Western United States. This dissertation describes a variety of improvements made to QUIC-Fire and its various incorporated algorithms in an effort to make it a viable tool in simulating wildland and prescribed fires on terrain. The modifications made to QUIC-Fire are described in three chapters. The first chapter describes the extension of the diagnostic wind model QUIC-URB, the wind engine of QUIC-Fire, to a terrain-following coordinate system. The terraininfluenced winds it generates are analyzed and compared. In particular, this chapter presents the mathematical derivation of the wind solver leading to a linear system of equations that are solved through the successive over-relaxation method. The model is validated against a standard test used in previous works (the Askervein Hill) and against a new dataset from measurements in the Socorro Mountains, New Mexico. The terrain-following implementation captures the correct phenomenology for the isolated Askervein Hill, with a wind speed up at the top of the hill. The model agrees well with measurements on the upwind side of the peak, but overestimates speed-up on the downwind side of the hill. This is due to the inability of the model to generate flow separation and wake-eddy dynamics. On a common laptop, the divergence-free wind field is obtained in 6 s, making the solver appealing for coupled fire-atmosphere simulations. The Socorro Mountain is highly complex, with many cliff faces, peaks, and valleys. Although the model captures the magnitude and direction of inlet and outlet areas of the domain, it performs rather poorly in the valley region and in the regions near the steep cliffs. Hence, the model shows good agreement with data in areas of open sloped terrain but lacks in areas where flow separation and thermally driven effects may be present (neither effect is addressed in this work). In the second chapter the implementation of the terrain-following version of QUIC-URB into QUIC-Fire, and the necessary changes needed to include terrain are described. No changes to the underlying fire spread algorithm are made other than what is required to correctly account for the inclusion of terrain. Previously published FIRETEC results that use five different topographies that share the same centerline profile are compared to simulation results from the modified QUIC-Fire that use the same topographies and fuels. QUIC-Fire results show overall similar behaviors in terms of how the topographies affect fire shapes and trends in spread rates. Due to the terrain-following version of QUIC-URB being unable to generate flow separations at the crest of hills, fire spread rates in these regions across all topographies are over-predicted when compared to FIRETEC. Lateral fire growth shows similar trends with FIRETEC between topographies but does not capture the increase in spread due to a diagonal interface between grassland and forested fuel region of the domain. These results suggest that there are three algorithms within QUIC-Fire that could use improvement: how flame tilt angle is accounted for, the incorporation of non-local drag effects, and the inclusion of the wake-eddy parameterizations that are used in QUIC-URB. Lastly, the third chapter describes a modification to the initial guess used for the calculation of the QUIC-URB mass-conserved wind solution during fire simulations. The modification is aimed at improving fire-fire interactions in QUIC-Fire simulations. The modification consists of using the solution from the previous timestep as the starting point for the calculation of the solution for the next timestep. Fire-fire interactions is greatly improved by the change but a new source of error is introduced. Due to how plumes are modelled in QUIC-Fire the new solution contains errors where gaps in the plume structure are present. However, these errors are mostly limited to the upper atmosphere, where they do not affect fire behavior at the surface, and their magnitude isn’t significant enough to discount the amount of new fire phenomenology now captured in QUIC-Fire with the change.

58 GEOSCIENCES↗

DOE OSTI2023

Saccharomycopsis praedatoria sp. nov., a predacious yeast isolated from soil and rotten wood in an Amazonian rainforest biome

Three yeast isolates were obtained from soil and rotting wood samples collected in an Amazonian rainforest biome in Brazil. Comparison of the intergenic spacer 5.8S region and the D1/D2 domains of the large subunit rRNA gene showed that the isolates represent a novel species of the genus Saccharomycopsis. A tree inferred from the D1/D2 sequences placed the novel species near a subclade containing Saccharomycopsis lassenensis, Saccharomycopsis fermentans, Saccharomycopsis javanensis, Saccharomycopsis babjevae, Saccharomycopsis schoenii and Saccharomycopsis oosterbeekiorum, but with low bootstrap support. In terms of sequence divergence, the novel species had the highest identity in the D1/D2 domains with Saccharomycopsis capsularis, from which it differed by 36 substitutions. In contrast, a phylogenomic analysis based on 1061 single-copy orthologs for a smaller set of Saccharomycopsis species whose whole genome sequences are available indicated that the novel species represented by strain UFMG-CM-Y6991 is phylogenetically closer to Saccharomycopsis fodiens and Saccharomycopsis sp. TF2021a (=Saccharomycopsis phalluae). The novel yeast is homothallic and produces asci with one spheroidal ascospore with an equatorial or subequatorial ledge. The name Saccharomycopsis praedatoria sp. nov. is proposed to accommodate the novel species. The holotype of Saccharomycopsis praedatoria is CBS 16589 T . The MycoBank number is MB849369. S. praedatoria was able to kill cells of Saccharomyces cerevisiae by means of penetration with infection pegs, a trait common to most species of Saccharomycopsis.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

Comparative genomics provides insights into the cold adaptation of endophytic fungi associated with Deschampsia antarctica

Endophytic fungi from Deschampsia antarctica , the southernmost flowering plant, provide insights into the cold adaptation mechanisms of plant-associated fungi in extreme environments. This study presents the genome sequences and comparative analysis of eight fungal isolates from D. antarctica leaves. These Antarctic fungal isolates were analyzed alongside 121 plant-associated fungal genomes to uncover signatures of adaptation and endophytic specialization. Antarctic endophytes show striking patterns, including reduced genome size (∼26.3 Mb on average), streamlined gene content (∼8844 genes), and notably small secretomes (∼288 proteins). Despite this reduced gene repertoire, they maintain a robust set of genes encoding carbohydrate-active enzymes (CAZymes) but lack those for lignin and bacterial cell wall degradation, indicating a symbiotic lifestyle that avoids host damage and predation. One isolate, Alternaria sp. UNIPAMPA017 stood out, with 26% of its genome occupied by transposable elements. Lifestyle, rather than phylogeny, was the main driver of CAZyme and secretome profiles, underscoring ecological convergence. Compared to endophytes from Arabidopsis and Populus, D. antarctica endophytes harbor fewer pectin-degrading enzymes, reflecting their adaptation to the cell wall structure of their monocot host. Together, these fungi reveal a pattern of genomic reduction and functional fine-tuning, hallmarks of life adapted to persist in cold, nutrient-scarce niches.

Ascomycota↗