Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Isolation Condenser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A novel mineral-acid free biphasic deep eutectic solvent/γ-valerolactone system for furfural production and boosting the enzymatic hydrolysis of lignocellulosic biomass

The failure of hemicellulose valorization in a deep eutectic solvent (DES) pretreatment has become a bottleneck that challenges its further development. Here, to address this issue, this study developed a DES/GVL (γ-valerolactone) biphasic system for effective hemicellulose-furfural conversion, enhanced cellulose saccharification and lignin isolation. The results indicated that the biphasic system could significantly improve the lignin removal (as high as 89.1%), 86.0% higher than the monophasic DES, accompanied by ~100% hemicellulose degradation. Notably, the GVL in the biphasic solvent restricted the condensation of hemicellulose degradation products, which as a result generated large amount of furfural in the pretreatment liquid with a yield of 68.6%. With the removal of hemicellulose and lignin, cellulose enzymatic hydrolysis yield was boosted and reached near 100%. This study highlighted that the novel DES/GVL is capable of fractionating the biomass and benefiting their individual utilization, which could provide a new biorefinery configuration for a DES pretreatment.

09 BIOMASS FUELS↗
DOE OSTI2021

Optimizing the surface distribution of acid sites for cooperative catalysis in condensation reactions promoted by water

Addition of small amounts of water to the organic solvent may result in different promoting or inhibiting effects in aldol condensation reactions depending on the distribution of active sites on the surface. In a combination of liquid-phase catalytic activity measurements, spectroscopies and theoretical calculations, we have shown that water clusters around the acid site can form bridges with a ketone molecule located close to the activated carbonyl, on another site. When the distance between the two acid sites is greater than a distance corresponding to about 2 water molecules, the efficiency of the bond polarization of the ketone by a remotely located acid site decreases significantly, and the presence of water no longer promotes the reaction. Furthermore, this work provides a quantitative assessment of how solvent molecules can bridge isolated active sites to enable cooperative catalysis, which offers an additional dimension for engineering catalysis at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Low-chromophore lignin isolation from natural biomass with polyol-based deep eutectic solvents

When attempting to obtain light-color lignin from lignocellulosic biomass or industrial lignin, the available options based on chemical or morphological modification suffer from low yield, high cost, and lack of availability at the required scales. In this study, we adopted a polyhydric-alcohol-based deep eutectic solvent (PA-DES) to directly extract light-color lignin from natural biomass, which is even whiter than native cellulolytic enzyme lignin (CEL). The isolated lignin possessed a high recovery yield (97.36%), regular micro-spherical morphology, enriched β-ether linkage of 58/100Ar, low phenolic hydroxyl content of 1.25 mmol g -1 , minimal carbonyl content of 0.70 mmol g -1 , and less condensed structures, thus yielding a lower content of chromophores. Further, this lignin showed excellent sunscreen effects, which could enhance the SPF of a commercial sunscreen from 15 to 40 with only 5 wt% addition. This study can provide essential guidance for the scale-up production of light-color lignin and obtaining near-complete digestible cellulose for further saccharification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

SRF Levitation and Trapping of Nanoparticles Experiment

The levitation and trapping of micro particles using lasers is not a new accomplishment and has been applied in containerless processing and spectroscopy of microparticles. Recent developments in the field of optomechanics have achieved levitating nanoparticles such that quantum phenomena was observed which would have relevance in quantum science and technology. This two-year project sought to levitate and trap mesoscopic particles using radio frequency (RF) fields in a resonating superconducting RF (SRF) cavity. By exploiting the intrinsic characteristics of an SRF resonating cavity, the project was to explore overcoming a major limit faced by current laser trapping techniques. The goal was to establish a foundation to enable the observation of quantum phenomena of an isolated mechanical oscillator interacting with microwave fields. If successful the experiment could establish its ground-breaking relevance to quantum information science and technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Compositional Control on Shale Pore Structure Characteristics across a Maturation Gradient: Insights from the Devonian New Albany Shale and Marcellus Shale in the Eastern United States

The pore structure characteristics of shales are controlled by their mineralogical and organic matter (OM) composition. However, the contributions by different components in shales at varying thermal maturities remain poorly understood. In this study, Devonian New Albany Shale and Marcellus Shale samples spanning a thermal maturity from marginally mature (vitrinite reflectance R o 0.55%) to post-mature (R o 2.41 %) were selected to study the control of composition on the pore structure properties of shales at different stages of thermal maturation. Scanning electron microscope (SEM) imaging was used to examine pore types in shales, and low-pressure N 2 and CO 2 adsorption analyses were used to quantitatively characterize the mesopore and micropore characteristics of bulk shales and major components in shales. The results show that matrix-associated pores including interparticle pores between silt-sized mineral grains, phyllosilicate framework pores, and intraparticle pores within mineral grains exist in all samples but become less common with increasing maturity, which is likely caused by elevated compaction, cementation, and occlusion with bitumen. Secondary organic pores were not observed under SEM at marginal maturity but were detected in the condensate–wet gas and dry gas windows, with more organic pores in the dry gas window. At marginal maturity, OM has large amounts of mesopores and micropores as demonstrated by low-pressure N 2 and CO 2 adsorption analyses of OM isolated from shales, even though no OM-hosted pores were observed under SEM. With increasing thermal maturity, the mesopore and micropore specific surface area of OM increase and make greater contributions to the pore structure properties of bulk shales. The mesopore and micropore properties of shales are controlled by OM content and maturity as well as by clay mineral type and content, and they can be estimated from the contribution of each component at different stages of thermal maturation. In conclusion, accurate evaluation of the pore volume and SSA of shales will have important implications for assessing gas adsorption and transport in shales.

03 NATURAL GAS↗
DOE OSTI2022

Accurate tight-binding model for twisted bilayer graphene describes topological flat bands without geometric relaxation

A major hurdle in understanding the phase diagram of twisted bilayer graphene is the roles of lattice relaxation and electronic structure on isolated band flattening near magic twist angles. Here in this work, the authors develop an accurate local environment tight-binding model fit to tight-binding parameters computed from ab initio density-functional theory calculations across many atomic configurations. With the accurate parametrization, it is found that the magic angle shifts to slightly lower angles than often quoted, from around 1.05° to around 0.99°, and that isolated flat bands appear for rigidly rotated graphene layers, with enhancement of the flat bands when the layers are allowed to distort. Study of the orbital localization supports the emergence of fragile topology in the isolated flat bands without the need for lattice relaxation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermal chains and entrainment in cumulus updrafts, Part 2: Analysis of idealized simulations

Research has suggested that the structure of deep convection often consists of a series of rising thermals, or “thermal chain”, which contrasts with existing conceptual models that are used to construct cumulus parameterizations. In this work, simplified theoretical expressions for updraft properties obtained in Part 1 of this study are used to develop a hypothesis explaining why this structure occurs. In this hypothesis, cumulus updraft structure is strongly influenced by organized entrainment below the updraft’s vertical velocity maximum. In a dry environment, this enhanced entrainment can locally reduce condensation rates and increase evaporation, thus eroding buoyancy. For moderate-to-large initial cloud radius R, this breaks up the updraft into a succession of discrete pulses of rising motion (i.e., a thermal chain). For small R, this leads to the structure of a single, isolated rising thermal. In contrast, moist environments are hypothesized to favor plume-like updrafts for moderate-to-large R. In a series of axisymmetric numerical cloud simulations, R and environmental relative humidity (RH) are systematically varied to test this hypothesis. Vertical profiles of fractional entrainment rate, passive tracer concentration, buoyancy, and vertical velocity from these runs agree well with vertical profiles calculated from the theoretical expressions in Part 1. Analysis of the simulations supports the hypothesized dependency of updraft structure on R and RH, that is, whether it consists of an isolated thermal, a thermal chain, or a plume, and the role of organized entrainment in driving this dependency. Additional 3-dimensional (3-D) turbulent cloud simulations are analyzed, and the behavior of these 3-D runs is qualitatively consistent with the theoretical expressions and axisymmetric simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Single monkey-saddle singularity of a Fermi surface and its instabilities

Fermi surfaces can undergo sharp transitions under smooth changes of parameters. Such transitions can have a topological character, as is the case when a higher-order singularity, one that requires cubic or higher-order terms to describe the electronic dispersion near the singularity, develops at the transition. When time-reversal and inversion symmetries are present, odd singularities can only appear in pairs within the Brillouin zone. In this case, the combination of the enhanced density of states that accompanies these singularities and the nesting between the pairs of singularities leads to interaction-driven instabilities. Here, we present examples of single n = 3 (monkey-saddle) singularities when time-reversal and inversion symmetries are broken. We then turn to the question of what instabilities are possible when the singularities are isolated. For spinful electrons, we find that the inclusion of repulsive interactions destroys any isolated monkey-saddle singularity present in the noninteracting spectrum by developing Stoner or Lifshitz instabilities. In contrast, for spinless electrons and at the mean-field level, we show that an isolated monkey-saddle singularity can be stabilized in the presence of short-range repulsive interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

The importance of kinematic twists and genuine saturation effects in dijet production at the Electron-Ion Collider

We compute the differential yield for quark anti-quark dijet production in high-energy electron-proton and electron-nucleus collisions at small x as a function of the relative momentum P ⊥ and momentum imbalance k ⊥ of the dijet system for different photon virtualities Q 2 , and study the elliptic and quadrangular anisotropies in the relative angle between P ⊥ and k ⊥ . We review and extend the analysis in [1], which compared the results of the Color Glass Condensate (CGC) with those obtained using the transverse momentum dependent (TMD) framework. In particular, we include in our comparison the improved TMD (ITMD) framework, which resums kinematic power corrections of the ratio k ⊥ over the hard scale Q ⊥ . By comparing ITMD and CGC results we are able to isolate genuine higher saturation contributions in the ratio Q s /Q ⊥ which are resummed only in the CGC. These saturation contributions are in addition to those in the Weizsäcker-Williams gluon TMD that appear in powers of Q s /k ⊥ . We provide numerical estimates of these contributions for inclusive dijet production at the future Electron-Ion Collider, and identify kinematic windows where they can become relevant in the measurement of dijet and dihadron azimuthal correlations. We argue that such measurements will allow the detailed experimental study of both kinematic power corrections and genuine gluon saturation effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

X-ray multiphoton-induced Coulomb explosion images complex single molecules

Following structural dynamics in real time is a fundamental goal towards a better understanding of chemical reactions. Recording snapshots of individual molecules with ultrashort exposure times is a key ingredient towards this goal, as atoms move on femtosecond (10 -15 s) timescales. For condensed-phase samples, ultrafast, atomically resolved structure determination has been demonstrated using X-ray and electron diffraction. Pioneering experiments have also started addressing gaseous samples. However, they face the problem of low target densities, low scattering cross sections and random spatial orientation of the molecules. Therefore, obtaining images of entire, isolated molecules capturing all constituents, including hydrogen atoms, remains challenging. Here we demonstrate that intense femtosecond pulses from an X-ray free-electron laser trigger rapid and complete Coulomb explosions of 2-iodopyridine and 2-iodopyrazine molecules. We obtain intriguingly clear momentum images depicting ten or eleven atoms, including all the hydrogens, and thus overcome a so-far impregnable barrier for complete Coulomb explosion imaging—its limitation on molecules consisting of three to five atoms. In combination with state-of-the-art multi-coincidence techniques and elaborate theoretical modelling, this allows tracing ultrafast hydrogen emission and obtaining information on the result of intramolecular electron rearrangement. Our work represents an important step towards imaging femtosecond chemistry via Coulomb explosion.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Transient mixing behavior of a supercritical fluid injected into supercritical and subcritical environments

Transient, near-field mixing of a supercritical fluid injected into supercritical and subcritical environments is investigated experimentally. Fuel (propane) from a 100 μm diameter Bosch diesel injector is injected into a high-pressure test rig with a steady flow of heated, low-velocity nitrogen to control the ambient pressure and temperature. The fuel supply pressure is approximately 190 bar, allowing short injections lasting 3–4 ms to be performed in quick succession to acquire statistically significant datasets to represent the unsteady fuel–air mixing. Two test cases with the same ambient density and injector inlet pressure and temperature were chosen in an attempt to isolate effects of mixture phase behavior. Microscopic rainbow Schlieren deflectometry (RSD) is used for visualization and quantitative data acquisition. In the case of the supercritical ambient, the injector inlet and exit and ambient conditions are all supercritical. The RSD analysis reveals a mixing process similar to the single phase fluid mixing, though condensation is also observed locally, and can be explained by the adiabatic mixing theory presented in the paper. For the subcritical ambient case, the injector inlet is supercritical, but the injector exit and ambient conditions are both subcritical. The results show a rapid expansion in the near-field promoting mixing between propane and nitrogen. At downstream locations, significant condensation is also observed as predicted by the adiabatic mixing theory. As a result, the supercritical ambient case exhibited longer and narrower jet penetration compared to the subcritical ambient case.

02 PETROLEUM↗
DOE OSTI2022

Dehydrogenation of Propane and n -Butane Catalyzed by Isolated PtZn 4 Sites Supported on Self-Pillared Zeolite Pentasil Nanosheets

Propene and 1,3-butadiene are important building-block chemicals that can be produced by dehydrogenation of propane and butane over Pt catalysts. The challenge is to develop highly active and selective catalysts that are resistant to deactivation by Pt sintering and coke formation. We have recently shown that these objectives can be met for propane dehydrogenation using atomically dispersed Pt atoms anchored to neighboring ≡SiOZn-OH groups bonded to the framework dealuminated zeolite BEA. In the present study, we demonstrate that significantly superior performance can be achieved by using self-pillared pentasil (SPP) zeolite nanosheets. Following catalyst reduction in H 2 , atomic-resolution, scanning transmission electron microscopy (STEM) and X-ray absorption spectroscopy (XAS) indicate that Pt is stabilized in structures well approximated as (≡Si-O-Zn) 4-5 Pt. These species are highly active, selective, and stable for propane dehydrogenation (PDH) to give propene and for n-butane dehydrogenation (BDH) to give 1,3-butadiene. No catalyst deactivation was observed after 12 days of time on stream, and the selectivity remained at nearly 100% for PDH conducted at 823 K and a weight hourly space velocity (WHSV) of 1,350 h -1 . The apparent rate coefficient for PDH over this catalyst is significantly higher than that reported previously for Pt-containing catalysts. For BDH at 823 K and a WHSV of 3560 h -1 , the selectivity to butene isomers and 1,3-butadiene is 98.9%, and the selectivity to 1,3-butadiene is 45%. Here, we propose that the high catalyst stability observed during PDH and BDH is a consequence of a large fraction of the Pt-containing centers being located on the external surface of the zeolite nanosheets, where nascent coke precursors can desorb before condensing to form coke.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Combinatorial gene inactivation of aldehyde dehydrogenases mitigates aldehyde oxidation catalyzed by E. coli resting cells

Aldehydes are attractive chemical targets both as end products in the flavors and fragrances industry and as synthetic intermediates due to their propensity for C–C bond formation. Here, in this study, we identify and address unexpected oxidation of a model collection of aromatic aldehydes, including many that originate from biomass degradation. When diverse aldehydes are supplemented to E. coli cells grown under aerobic conditions, as expected they are either reduced by the wild-type MG1655 strain or stabilized by a strain engineered for reduced aromatic aldehyde reduction (the E. coli RARE strain). Surprisingly, when these same aldehydes are supplemented to resting cell preparations of either E. coli strain, under many conditions we observe substantial oxidation. By performing combinatorial inactivation of six candidate aldehyde dehydrogenase genes in the E. coli genome using multiplexed automatable genome engineering (MAGE), we demonstrate that this oxidation can be substantially slowed, with greater than 50% retention of 6 out of 8 aldehydes when assayed 4 h after their addition. Given that our newly engineered strain exhibits reduced oxidation and reduction of aromatic aldehydes, we dubbed it the E. coli ROAR strain. We applied the new strain to resting cell biocatalysis for two kinds of reactions – the reduction of 2-furoic acid to furfural and the condensation of 3-hydroxybenzaldehyde and glycine to form a non-standard β-hydroxy-α-amino acid. In each case, we observed substantial improvements in product titer 20 h after reaction initiation (9-fold and 10-fold, respectively). Moving forward, the use of this strain to generate resting cells should allow aldehyde product isolation, further enzymatic conversion, or chemical reactivity under cellular contexts that better accommodate aldehyde toxicity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Deconstructing the Local Intermolecular Ordering and Dynamics of Liquid Chloroform and Bromoform

Local intermolecular structure and dynamics of the polar molecular liquids chloroform and bromoform are studied by molecular dynamics simulation. Structural distribution functions, including 1- and 2-D pair correlations and dipole contour plots allow direct comparison and show agreement with recent analyses of diffraction experiments. Studies of the haloforms’ reorientational dynamics and longevity of structural features resulting from intermolecular interaction extend previous work toward deeper understanding of the factors controlling these features. Analyses of ensemble average structures and dynamical properties isolate mass, electrostatics, and steric packing as driving forces or contributing factors for the observed ordering and dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamically Chiral Expanded Helicenes

Expanded helicenes are a class of chiral nanographenes with a screw-shaped skeleton and a larger diameter than their classical ortho-fused counterparts. The flexibility of this internal cavity results in helicenes that are often difficult to isolate as single enantiomers. Expanded helicenes are therefore an intriguing target for exploration of dynamic chirality, a phenomenon resulting from introduction of chiral auxiliaries to control structure in a racemic system. This contribution describes installation of chiral amine substituents into the cavity of a diformyl expanded [11]-helicene by mild, efficient, and reversible imine condensations. The resulting helicenes display strong molar circular dichroism up to |Δε| = 300 M -1 cm -1 and absorption dissymmetry factors of |g abs | = 0.010. The magnitude of circular dichroism can be varied by using different chiral amine substituents, which is correlated to the diastereomeric ratios of the helicenes. In conclusion, this is the first instance of dynamic chirality being used to observe a chiroptic response in expanded helicenes and is a significant synthetic improvement over methods which require conventional enantiomer resolution.

Rothenberger, August J. [University of California,↗
DOE OSTI2023

Electrochemical C–N Bond Formation within Boron Imidazolate Cages Featuring Single Copper Sites

Electrocatalysis expands the ability to generate industrially relevant chemicals locally and on-demand with intermittent renewable energy, thereby improving grid resiliency and reducing supply logistics. Herein, we report the feasibility of using molecular copper boron-imidazolate cages, BIF-29(Cu), to enable coupling between the electroreduction reaction of CO 2 (CO 2 RR) with NO 3 – reduction (NO 3 RR) to produce urea with high selectivity of 68.5% and activity of 424 μA cm –2 . Remarkably, BIF-29(Cu) is among the most selective systems for this multistep C–N coupling to-date, despite possessing isolated single-metal sites. The mechanism for C–N bond formation was probed with a combination of electrochemical analysis, in situ spectroscopy, and atomic-scale simulations. We found that NO 3 RR and CO 2 RR occur in tandem at separate copper sites with the most favorable C–N coupling pathway following the condensation between *CO and NH 2 OH to produce urea. In conclusion, this work highlights the utility of supramolecular metal–organic cages with atomically discrete active sites to enable highly efficient coupling reactions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Charge density fluctuations with enhanced superconductivity at the proposed quantum critical point of Sr0.77⁢Ba0.23⁢Ni2⁢As2

A quantum critical point (QCP) represents a continuous phase transition at absolute zero. In unconventional superconductors, enhanced superconducting transition temperature and magnetic fluctuation strength are often observed together, indicating magnetism-mediated superconductivity. This raises the question of whether quantum fluctuations in other degrees of freedom, such as charge, could similarly boost superconductivity. However, because charge is frequently intertwined with magnetism, isolating and understanding its specific role in Cooper pair formation pose a significant challenge. Here, we report persistent charge density fluctuations (CDFs) down to 15 K in the nonmagnetic superconductor Sr0.77⁢Ba0.23⁢Ni2⁢As2, which lie near a proposed nematic QCP associated with a sixfold enhancement of superconductivity. Our results show that the quasielastic CDFs do not condense into resolution-limited Bragg peaks but, rather, display nonsaturated strength. The phonons associated with CDFs completely soften at 25 K, with their critical behavior described by the same mathematical framework as the antiferromagnetic Fermi liquid model, yielding a fitted Curie-Weiss temperature of 𝜃≈0K. Additionally, we find that the nematic fluctuations are weakly coupled to the lattice, as evidenced by the absence of softening in nematic-coupled in-plane transverse acoustic phonons. Our discovery positions Sr𝑥⁢Ba1−𝑥⁢Ni2⁢As2 as a promising candidate for charge-fluctuation-driven superconductivity.

Aczel, Adam [ORNL] (ORCID:0000000319641943)↗
DOE OSTI2026

Disentangling High Harmonic Generation from Surface and Bulk States of a Topological Insulator

The discovery of topological phases has introduced a new dimension to materials science. Three-dimensional (3D) topological insulators (TIs) are a remarkable class of matter that is insulating in the bulk while hosting conductive topological surface states (TSSs) with unique charge and spin properties. High-order harmonic generation (HHG) has emerged as a powerful tool to probe condensed matter systems by providing insights into their electronic structure and dynamic behavior. Here, we investigate HHG in the prototype 3D-TI Bi$_2$Se$_3$. We demonstrate that the contributions of bulk and surface states to the harmonic emission can be controlled by tuning the thickness of thin film samples. An ultrathin (6 nm) film substantially enhances HHG from the surface states, while the bulk states dominate HHG in a thicker (50 nm) film. By applying a quasi-static terahertz perturbing field, we disentangle the bulk and surface responses and reveal the significant impact of the surface states' shift vector and Berry curvature on HHG. Our study provides effective methods for isolating the optical responses of TSSs from those of the bulk, which opens the door to resolving an ongoing debate regarding whether it is possible to reliably extract topological signatures in HHG.

Atomic Physics (physics.atom-ph)↗