Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Intern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Klaus Mayer's Legacy and Leadership of Nuclear Forensics and the International Technical Working Group

The Nuclear Forensics International Technical Working Group (ITWG), in an evidentiary sense, has Dr. Klaus Mayer’s fingerprints all over it. His contributions to the working group and the broader international nuclear forensics community have been profound. As Klaus retires from the European Commission’s Joint Research Centre in Karlsruhe, Germany (JRC-Karlsruhe), it is only fitting to reflect on his dedication and lasting impact on nuclear forensics—guiding its evolution from its early days to its establishment as a vital tool for competent authorities in preventing and responding to the serious threat of nuclear and other radioactive materials out of regulatory control.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2025

Conference Travel Fellowships: The 10th Annual International Conference on Multiscale Materials Modeling, Baltimore, Maryland, October 19-22, 2020 (Final Technical Report)

The original scope aimed to broaden participation in the 10th International Conference on Multiscale Materials Modeling (MMM 10) by supporting travel and accommodation for 10 junior scientists from U.S. Institutions. A funding request of $\$$10,000 was submitted to partially offset the cost of registration and local accommodation for these early-career participants. Since the award was made close to the date MMM 10 was to be held, we requested a no-cost extension to defer this travel support to the 11th International Conference on Multiscale Materials Modeling (MMM 11), which was held in Prague Congress Center in the Czech Republic. The scope of the travel award remained the same: supporting travel and accommodation for 10 junior scientists from U.S. Institutions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mapping and Synthesis of International Biomass Supply Assessments

This report, Mapping and Synthesis of International Biomass Supply Assessments (or Global Biomass Resource Assessment) is the first step in a long-term process to assemble data from around the globe into a virtual repository that can be updated and provide user-friendly access to the data. The Clean Energy Ministerial (CEM) Biofuture Platform Initiative recommended that research be completed to “address the need for internationally accepted benchmarks quantifying sustainable biomass feedstock supplies.” To act upon the CEM Biofuture recommendation, in 2024, the U.S. Department of Energy (DOE) commissioned Oak Ridge National Laboratory (ORNL) to prepare this report as the primary deliverable for a one-year assignment to assemble data into a citable form that could help resolve the persistent question presented related to bioenergy policy, “Is there enough sustainable biomass?” In response to that query, this report includes information received by August 2024 from national CEM representatives, collaborators, and public sources on current and future sustainable biomass supplies in 62 nations,and subsequently documents (a) the approach used by ORNL to analyze and categorize the information received in a manner that enables aggregation and comparability; and (b) recommendations for next steps and guidelines to help others update and harmonize future assessments of global sustainable biomass supplies.

09 BIOMASS FUELS↗
DOE OSTI2025

Heat Transfer of Supercritical Carbon Dioxide in 3D-Printed Tubes with Internal Ribs and Yttria Stabilized Zirconia Coating

This technical report describes measurements performed in NETL’s Heat Exchanger Experimental Test (HEET) facility using supercritical carbon dioxide as the working fluid. 3D printed tubes with internal ribs and yttria stabilized zirconia (YSZ) exterior coatings were employed in the heat exchanger. Heat transfer and friction factor enhancements from the internal ribs were characterized over a range of flow conditions. Additionally, the thermal resistance from the YSZ coating was characterized for both a freshly applied coating and a coating subjected to thermal aging.

36 MATERIALS SCIENCE↗
DOE OSTI2024

TuFF internal WRAP for Rapid Pipeline Repair (TuFF iWRAP)

The goal of “TuFF internal WRAP for Rapid Pipeline Repair” (TuFF iWRAP) program was to develop a novel material system and placement process to fabricate structural pipe within the existing deteriorated pipelines without disruption of gas delivery. The team (University of Delaware – Center for Composite Materials (UD-CCM) and Plitzie Inc.) addressed this challenge by developing a new material feedstock and pipe in pipe (PIP) repair strategy. This allows the potential for significant cost reduction and has minimum operational impact on gas customers. The new robotic based placement design allows discontinuous placement of pipe sections creating a stand-alone structural liner within the legacy pipeline without the need for pipe shutdown. Here, the material is supplied using a tethered material feeding system and is placed and UV cured with the internal Wound Rapid Automated Placement (iWRAP) system. This provides maximum placement efficiency capable of traversing 90 angle bends in 12-inch pipe and overall design customization to meet pipe repair requirements (e.g., variable wall thickness, bridging gaps, etc.). UV-curable fiber reinforced composite material has been optimized to meet structural performance and placement/cure times. Superior strength and fatigue life has been demonstrated by improving fiber-matrix adhesion using new fiber sizing for UV resins. Rapid cure approaches using new liner and resins have been evaluated with industry. The appropriate design of the section joints has been developed and tested. We estimate coating time to be ~100 hours per mile enabling typical pipe repair within 1 week.

03 NATURAL GAS↗
DOE OSTI2025

Capability Building Progression of an Insider Threat Mitigation Program at an International Nuclear Power Plant (Rev. 1)

With threats to nuclear facilities continuously evolving, the development and implementation of insider threat mitigation programs (ITMPs) are increasingly important. The Office of International Nuclear Security (INS) within the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA’s) developed Capability Building Progression of an Insider Threat Mitigation Program at an International Nuclear Power Plant to assist newcomers and existing nuclear power plant (NPP) operators in addressing insider threats and establishing effective response measures for insider activities.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2025

2024 International Conference on Ionizing Processes

This Basic Energy Sciences (BES) award provided targeted support to early-career investigators to facilitate their attendance and participation in the International Conference on Ionizing Processes (ICIP 2024), organized and hosted at the University of Notre Dame campus between August 11th and 15th, 2024. The support enabled young researchers to present their work through oral and poster presentations, engage with senior leaders in the field, and strengthen national research capabilities in radiation chemistry and related disciplines. A total of 19 young investigators from U.S. academic institutions and national laboratories received registration discounts, and 8 of them also received additional travel-offset awards. Four of the young investigators received travel offset awards without registration discounts; hence, the total number of awardees was 23. Five awards were given to young investigators from Brookhaven National Laboratory, five to Idaho National Laboratory, one to Los Alamos National Laboratory, one to Michigan State University, one to Colorado School of Mines, and 10 to Notre Dame Radiation Laboratory. Total DOE funding directly reduced financial barriers to participation, enhancing U.S. early-career representation at this important international conference.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

26th International Symposium on Plant Lipids

The 2024 International Symposium on Plant Lipids (ISPL) successfully advanced scientific knowledge in plant lipid biology by presenting new discoveries in lipid metabolism, membrane structure and function, lipid signaling, and biotechnology. The symposium fostered professional development for early-career scientists through oral and poster presentation opportunities, lightning talks, and networking events. It promoted the exchange of new technologies, including advances in mass spectrometry, metabolic modeling, and synthetic biology, that will accelerate research across plant biology and related fields. ISPL also strengthened international collaborations, drawing 220 participants from 15 countries across four continents, and established a platform for ongoing scientific exchange and community-building within the global plant lipid research community.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Polarized internal target experiments based on EIC beams

The Electron-Ion Collider is under construction at BNL. It will have high-energy high-intensity polarized beams of electrons and hadrons. These beams will allow a high accuracy investigation of nucleon structure in the low- to very-low-x DIS regime. At the same time, similar to the realization at HERA, these beams could be used with an internal target for a very productive investigation of medium- to high-x nucleon structure. Due to a novel regime of electron beam operation and its high polarization and intensity, the Figure-of-Merit of an internal target experiment at EIC will be 500+ times higher than was obtained by HERMES.

Wojtsekhowski, Bogdan↗
DOE OSTI2024

Measurement report: The Fifth International Workshop on Ice Nucleation phase 1 (FIN-01): intercomparison of single-particle mass spectrometers

Knowledge of the chemical composition and mixing state of aerosols at a single-particle level is critical for gaining insights into atmospheric processes. One common tool to make these measurements is single-particle mass spectrometry. There remains a need to compare the performance of different single-particle mass spectrometers (SPMSs). An intercomparison of SPMSs was conducted at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) chamber at the Karlsruhe Institute of Technology (KIT) in November 2014, as part of the first phase of the Fifth International Workshop on Ice Nucleation (FIN-01). In this paper we compare size distributions and mass spectra of atmospherically relevant particle types measured by five SPMSs. These include different minerals, desert and soil dusts, soot, bioaerosol (Snomax; protein granule), secondary organic aerosol (SOA), and SOA-coated mineral particles. Most SPMSs reported similar vacuum aerodynamic diameter (d va ) within typical instrumental ranges from ~100–200 nm (lower limit) to ~2–3 µm (upper limit). In general, all SPMSs exhibited a wide dynamic range (up to ~10 3 ) and high signal-to-noise ratio (up to ~10 4 ) in mass spectra. Common spectral features with small diversities in mass spectra were found with high average Pearson's correlation coefficients, i.e., for average positive spectra r avg-pos =0.74 ± 0.12 and average negative spectra r avg-neg =0.67 ± 0.22. We found that instrument-specific detection efficiency (DE) was more dependent on particle size than particle type, and particle identification favored the use of bipolar, rather than monopolar, instruments. Particle classification from “blind experiments” showed that all instruments differentiated SOA, soot, and soil dust and detected subtle changes in the particle internal mixing but had difficulties differentiating among specific mineral types and dusts. This study helps to further understand the capabilities and limitations of the single-particle mass spectrometry technique in general and the specific performance of the instrument in characterizing atmospheric aerosol particles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Generation IV International Forum – Knowledge Management and Knowledge Preservation: An initiative from the Education and Training Working Group

Dr. Patricia Paviet is the Chair of the Generation IV International Forum – Education and Training Working Group. As such, she is overseeing and directing several initiative: The GIF webinar series and the Pitch your Gen IV Research competition. This group has launched a new initiative on knowledge management and knowledge preservation of advanced reactor systems and how lessons learned are passed on in an international context. The paper is a summary of the various GIF member countries’ strategies to preserve and transfer the knowledge of advanced reactors.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2024

Piston for use in internal combustion engines and method of making the piston

An additive manufactured piston having a crown portion and a skirt portion form of an aluminum-cerium-silicon alloy. The piston includes a least one recess pocket in an unstressed region located at an interface between an inner surface of the crown portion and an outer surface of the skirt portion. The skirt portion includes an outer panel surface defining an external rib adjacent a peripheral end surface, at least one stiffening rib extending from a pin boss to a skirt end, and a wall thickness of between 0.2 mm and 1.0 mm in a region between the external rib and the at least one stiffening rib. The skirt portion further includes an internal first rib having a width W1 on a thrust side portion and an internal second rib having a width W2 located on an anti-thrust side portion, in which W1 is greater than W2.

Petrus, Ronald John↗
DOE OSTI2025

Status of the International Criticality Safety Benchmark Evaluation Project

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued its work generating evaluations of new and historical benchmark experiments since the last update to the nuclear criticality safety (NCS) community at the 12th International Conference on Nuclear Criticality Conference held in 2023. One additional version of the ICSBEP Handbook has been published since that update, and the Technical Review Group (TRG) held two in-person meetings to review and approve additional benchmarks. The 2022 and 2023 editions of the handbook were combined into one release (published in November 2024) and contained 13 new evaluations with 46 different configurations and two major revisions to existing evaluations. The 2024 version of the handbook, currently under publication review, will contain two new evaluations with 15 new configurations and one major revision to HEU-MET-FAST-028, the evaluation of Flattop with a uranium core. The ICSBEP TRG met again in person in April 2025 to review benchmarks for the 2025 ICSBEP Handbook and final comment resolution is currently ongoing. Many of the new benchmarks represent contemporaneous experiments that have been specifically optimized to provide validation cases relevant to the NCS community. One major area of focus for new critical experiments is to target the sparsely populated intermediate energy (or resonance) region. Another focus of many of the new benchmarks is to provide experiments sensitive to different materials, such as chlorine, hafnium, tantalum, titanium, molybdenum, chromium, and polymethyl methacrylate (PMMA, or Lucite). The ICSBEP continues to deliver high-quality, peer reviewed evaluations of integral experiments relevant to the nuclear data community.

HEU-MET-FAST-028↗
DOE OSTI2026

FEL2026 - 42nd International Free Electron Laser Conference - Prepress

On behalf of the International Executive Committee of the FEL Conference series, we are pleased to announce the 42nd International Free Electron Laser Conference (FEL2026). The conference will be held at Li Ka Shing Center located on Stanford campus from August 23rd to August 28th, 2026. FEL2026 will focus on recent advances in free electron laser theory and experiments, electron beam, photon beam and undulator technologies, and applications of free electron lasers. FEL2026 will be hosted by SLAC National Accelerator Laboratory and Stanford PULSE Institute. Stanford is the birthplace of the free-electron laser. SLAC houses two premier X-ray FEL facilities (LCLS and LCLS‑II) in the US. The conference program will include an optional tour of the LCLS and LCLS-II. Stay tuned for more conference information by following this official conference website (www.fel2026.org). Email questions should be addressed to fel2026@slac.stanford.edu.

Summers, Tasha [SLAC National Accelerator Laborato↗
DOE OSTI2026

The Zooplankton International Geospatial dataset: A global repository of spatiotemporal freshwater zooplankton community composition data from lakes and reservoirs to support ecological research

Zooplankton transfer substantial energy in aquatic food webs and are used as indicators of environmental change. Syntheses of zooplankton community dynamics globally require datasets that span a wide range of environmental gradients; however, these datasets are limited due to methodological differences across programs, taxonomic inconsistencies, and a lack of standardized metadata. To reconcile these challenges, we created the Zooplankton International Geospatial (ZIG) dataset, which includes original zooplankton, water physical and chemical variables, and lake morphometric data from 311 inland lakes and reservoirs. ZIG includes waterbodies ranging in size from 0.005 to 82,100 km2 and spanning broad latitudinal (−47.26 to 64.90) and longitudinal ranges (−165.04 to 176.53). Temporal coverage for individual waterbodies ranges between 1 and 60 yr with sampling frequency ranging from annually to weekly. With its extensive coverage and content, we consider ZIG to be a cornerstone for future investigations of global scale lake biodiversity change.

Figary, Stephanie [Cornell University, Ithaca, NY]↗
DOE OSTI2024

Direct internal recycling fractions approaching unity

Direct internal recycling (DIR) refers to the process of recovering pure hydrogen isotopes (D/T) from helium and other impurities in the fusion plasma exhaust and directing them back to the fuel injection system. Increasing the exhaust fraction purified through DIR significantly reduces the size and cost of the tritium plant and provides additional benefits including reduced requirements for both the tritium startup inventory and tritium breeding ratio. Metal foil pumps (MFPs) are the dominant technology for this separation, relying on the concept of superpermeation. We recently demonstrated that PdCu foils operated at low temperature provide both exceptional flux and resilience to helium absorption as the DIR fraction is increased. Herein we design and demonstrate continuous and semi-batch DIR processes using PdCu MFPs. Under continuous processing, stable performance was observed for DIR fractions up to 92 %. In addition, we demonstrate a semi-batch process capable of extending the DIR fraction to unity (> 99.8 %). Under the experimental conditions described within a PdCu MFP area of ~22 m 2 would be sufficient to process the fusion exhaust with 92 % DIR fraction at expected flowrates of 100 Pa·m 3 ·s -1 for a future fusion power plant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

The impact of argon addition on hydrogen superpermeation through palladium alloy metal foil pumps during direct internal recycling

Metal foil pumps (MFPs) are a leading technology for the direct internal recycling (DIR) of hydrogen isotopes from the plasma exhaust of fusion devices. MFPs rely on the concept of superpermeation, where plasma-generated atomic hydrogen absorbs into the metal foil, rapidly diffuses, and desorbs downstream. To date, studies of superpermeation have predominantly employed pure hydrogen or in some cases trace levels of impurities. In practice the plasma exhaust may contain significant levels of plasma enhancement gases such as argon, an inert gas with metastable states that can enhance the plasma. In this work, we systematically study the impact of Ar addition on the performance of PdCu and PdAg MFPs at low temperature. Performance was strongly dependent on the DIR fraction. At negligible DIR levels Ar addition did not significantly improve the flux over dilution effects. However, under appreciable DIR operation the flux was enhanced up to 90 % relative to pure H 2 , with the optimal concentration range being 5–10 % Ar exiting the system. Beyond 15 % addition plasma enhancement benefits were offset by dilution. Performance correlated with the atomic H emission, and benefits were more pronounced for PdAg than PdCu. Operation at significant DIR levels dramatically alters the flow dynamics resulting in concentration gradients near the MFP, creating plasma conditions that promote H 2 dissociation.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗