SEARCH · Engineering Papers

Results for “Interface velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Large-scale atomistic studies of sliding friction in polycrystalline aluminum interfaces

In this work, we discuss large-scale non-equilibrium molecular dynamics (NEMD) simulations of ductile metal sliding comprising up to 1.8 × 10 9 atoms over time scales of 100 ns. The results of these simulations have identified a variety of physical mechanisms that are important in determining the steady-state frictional force for a wide range of velocities at compressed metal–metal interfaces. These include grain growth and refinement, the evolution of large plastic strains and strain rates, material mixing, and melting. These phenomena can be included in a strain, strain rate, and grain size model that gives good agreement with the NEMD simulations and can be applied to macroscopic continua.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2025

Understanding the Effects of Inhomogeneities at the Back Interface of CdTe‐Based Solar Cells Using 2D Modeling

One-dimensional modeling cannot capture lateral inhomogeneities in CdTe-based devices. Here, we use 2D modeling to investigate the role of varying energetics at the back interface. We consider improvements in the back interface layer (BIL) through either reducing back surface recombination velocity (BSRV) or decreasing the downward band bending near the back interface. We show that when the BSRV is reduced, but strong downward band bending remains, there is no change in the device performance until the BSRV of 90% of the back interface is improved by the BIL. On the other hand, any coverage with a BIL that improves band bending results in device improvements. We use band bending, back interface recombination current densities, and voltage dependent current flow through the device to understand these improvements. The modeling shows that lateral flow of carriers greatly affects device performance, which is not captured in parallel diode modeling, and demonstrates improved understanding with 2D modeling.

2D modelling↗

DOE OSTI2022

Investigating growth to detonation in vapor-deposited hexanitrostilbene and pentaerythritol tetranitrate films using high-throughput methods

In this work, a high-throughput experimental setup was used to characterize initiation threshold and growth to detonation in the explosives hexanitrostilbene (HNS) and pentaerythritol tetranitrate (PETN). The experiment sequentially launched an array of laser-driven flyers to shock samples arranged in a 96-well microplate geometry, with photonic Doppler velocimetry diagnostics to characterize flyer velocity and particle velocity at the explosive–substrate interface. Vapor-deposited films of HNS and PETN were used to provide numerous samples with various thicknesses, enabling characterization of the evolution of growth to detonation. One-dimensional hydrocode simulations were performed with reactions disabled to illustrate where the experimental data deviate from the predicted inert response. Prompt initiation was observed in 144 μm thick HNS films at flyer velocities near 3000 m/s and in 125 μm thick PETN films at flyer velocities near 2400 m/s. This experimental setup enables rapid quantification of the growth of reactions in explosive materials that can reach detonation at sub-millimeter length scales. These data can subsequently be used for parameterizing reactive burn models in hydrocode simulations, as discussed in Paper II [D. E. Kittell, R. Knepper, and A. S. Tappan, J. Appl. Phys. 131, 154902 (2022)].

36 MATERIALS SCIENCE↗

DOE OSTI2024

Robust 3D multi-material hydrodynamics using discontinuous Galerkin methods

A high-order discontinuous Galerkin (DG) method is presented for nonequilibrium multi-material (m ≥ 2) flow with sharp interfaces. Material interfaces are reconstructed using the algebraic THINC approach, resulting in a sharp interface resolution. The system assumes stiff velocity relaxation and pressure nonequilibrium. The presented DG method uses Dubiner's orthogonal basis functions on tetrahedral elements. This results in a unique combination of sharp multimaterial interfaces and high-order accurate solutions in smooth single-material regions. A novel shock indicator based on the interface conservation condition is introduced to mark regions with discontinuities. Slope limiting techniques are applied only in these regions so that nonphysical oscillations are eliminated while maintaining high-order accuracy in smooth regions. A local projection is applied on the limited solution to ensure discrete closure law preservation. The effectiveness of this novel limiting strategy is demonstrated for complex three-dimensional multi-material problems, where robustness of the method is critical. The presented numerical problems demonstrate that more accurate and efficient multi-material solutions can be obtained by the DG method, as compared to second-order finite volume methods.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Calibration and characterization of the line-VISAR diagnostic at the HED-HIBEF instrument at the European XFEL

In dynamic-compression experiments, the line-imaging Velocity Interferometer System for Any Reflector (VISAR) is a well-established diagnostic used to probe the velocity history, including wave profiles derived from dynamically compressed interfaces and wavefronts, depending on material optical properties. Knowledge of the velocity history allows for the determination of the pressure achieved during compression. Such a VISAR analysis is often based on Fourier transform techniques and assumes that the recorded interferograms are free from image distortions. In this paper, we describe the VISAR diagnostic installed at the HED-HIBEF instrument located at the European XFEL along with its calibration and characterization. It comprises a two-color (532, 1064 nm), three-arm (with three velocity sensitivities) line imaging system. We provide a procedure to correct VISAR images for geometric distortions and evaluate the performance of the system using Fourier analysis. We finally discuss the spatial and temporal calibrations of the diagnostic. As an example, we compare the pressure extracted from the VISAR analysis of shock-compressed polyimide and silicon.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

A mass–momentum consistent coupling for mesh-adaptive two-phase flow simulations

Here, we present a novel mass-momentum consistent coupling between a geometric volume-of-fluid scheme and an incompressible flow solver with differing directional-splitting approaches. The advection of the volume fraction is performed using a direction-split algorithm, whereas the momentum advection algorithm uses a traditional unsplit, fractional-step approach. Both algorithms employ finite-volume discretizations based on Cartesian meshes. In solving the mass-momentum consistency problem, momentum fluxes at the cell faces are weighted by the density fluxes based on the already advected volume fraction. The success of our approach lies on introducing a Favre-averaged velocity interpolation at the liquid/gas interface along with a minmod slope limiter. Mesh-convergence studies show that when the minmod slope limiter is used, the two-phase solver retains an accuracy between first and second order, but when a purely upwind scheme is considered, its accuracy drops to first order. Finally, after considering several validation problems, the solver is shown to agree well with reference numerical and experimental data while retaining its robustness and efficiency.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Impact of Surface Recombination on Single-Event Charge Collection in an SOI Technology

Semiconductor–insulator interfaces play an important role in the reliability of integrated devices; however, the impact of these interfaces on the physical mechanisms related to single-event effects has not been previously reported. We present experimental data that demonstrate that single-event charge collection can be impacted by changes in interface quality. The experimental data, combined with simulations, show that single-event response may depend on surface recombination at interface defects. The effect depends on strike location and increases with increasing linear energy transfer (LET). Surface recombination can affect single-event charge collection for interfaces with a surface recombination velocity (SRV) of 1000 cm/s and is a dominant charge collection mechanism with SRV >10 5 cm/s.

42 ENGINEERING↗

DOE OSTI2026

Close-Out Project Description for Koepke's Dept of Energy grant DE-SC0021405

Objectives: To establish, for lab & space conditions, EM-IEDDI’s (electromagnetic shear-driven instability's) dispersion relation, unstable range, instability threshold, and mode characteristics, we need LAPD’s Alfven-wave-favorable electromagnetic-style conditions, including higher "beta" (0.001 < beta ≤ 0.3) and low-collisionality. Also, we attempted to intentionally launch or spontaneously destabilize compressional and shear Alfven waves in the strong, localized, perpendicular-velocity-shear region at the interface between coaxial plasmas (one plasma cylinder inside an outer, otherwise hollow, tube, each having a different, controllable, value of plasma electrostatic potential, i.e., “space” potential (not to be confused with the temperature-dependent “floating” potential of an object immersed in the plasma). Nonlinear wave-wave interactions between same-family (EM-IEDD or Alfven) and cross-family (EM-IEDD-with-Alfven) fluctuations were targeted for documentation over a range of spectral overlap. Although laboratory experiments were conducted, the following theoretical work was left unfinished: Analytical non-modal prediction Computational non-modal prediction Check to see if Mikhailenko’s theory formulation leads to his published graphs

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Computationally-Aided Design of a Small-Scale Radioactive Waste Glass Melter

To provide mission support to the Hanford Waste Immobilization and Treatment Plant for the vitrification of legacy nuclear tank waste, a reduced-scale vitrification pilot system is being designed to process simulated and actual radioactive tank wastes. The tank waste will be separated into high-level waste (HLW) and low-activity waste (LAW) fractions, where the majority by mass (~90%) is LAW and by activity (>95%) is HLW. The first tank waste to be processed at the WTP will be LAW. Since Hanford tank waste and the resultant melter feed compositions are known to vary widely, pilot-scale operations are essential to identify potential problems, provide needed data, confirm assumptions, and determine impacts to full-scale melters and off-gas systems from these different feeds. In addition, the reduced-scale melter system must be capable of quickly providing results to operations without the typically high costs of radioactive operations and provide an engineering platform in close proximity to local operations staff. The objective is to produce similar process conditions to those encountered in the full-scale LAW melters and minimize the volume of radioactive waste necessary for the evaluations. To this end, melter design features are being explored to increase production without significantly increasing surface area, melter glass volumes or compromising data quality. In support of these objectives, a set of computational fluid dynamic models have been developed to provide insight into the flow patterns within these small melters and evaluate design features to increase production without significantly increasing glass inventory. Computed velocities were evaluated at the interface between the cold cap and the molten glass pool and within the bulk glass pool. A method was developed to correlate results to an estimated melt rate and down-select design features that produce the highest gains.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Computationally-Aided Design of a Small-Scale Radioactive Waste Glass Melter

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Carrier Dynamics and Photoluminescence in Antimony-Doped CdTe and CdSeTe

Arsenic (As)-doped graded Cd(Se,Te) photovoltaics have achieved record efficiency of 22.4%, but further increases in efficiency have been limited by doping activation of only ~1% and radiative voltage losses of ~100 meV. Antimony (Sb) can also act as a p-type dopant of Cd(Se,Te) but has received relatively little attention. We measured carrier dynamics and photoluminescence of Sb-doped CdTe and CdSeTe films grown by vapor-transport deposition, with dopant activation up to ~20% Time resolved terahertz (TRTS) and photoluminescence (TRPL) data were fit by simulating the semiconductor equations, revealing bulk lifetimes of >20 ns in CdTe:Sb and >65 ns in CdSeTe:Sb and surface recombination velocities <1000 cm/s at alumina interfaces. We also qualitatively compare transients and PL spectra of doped and undoped films, with no apparent variation associated with hole concentrations up to 1015 cm-3. Preliminary variable temperature steady state photoluminescence (VT-SSPL) indicates dominant band-gap emission in CdSeTe:Sb and no evidence of potential fluctuations with Sb-doping up to this hole concentration.

14 SOLAR ENERGY↗

DOE OSTI2022

Effect of Solvent Motion on Ion Transport in Electrolytes

We use concentrated solution theory to derive an equation governing solvent velocity in a binary electrolyte when a current passes through it. This equation, in combination with the material balance equation, enables the prediction of electrolyte concentration profiles and species velocities as a function of space and time. This framework is used to predict ion velocities in Li-Li symmetric cells containing a mixture of lithium bis(trifluoromethanesulfonyl)imide and poly(ethylene oxide) (LiTFSI/PEO), for which the cation transference number relative to the solvent velocity, ${t}_{+}^{0},$ can be either positive or negative, depending on salt concentration. Accounting for the solvent motion is increasingly important at higher concentrations. Especially for negative ${t}_{+}^{0},$ if solvent velocity is set to zero, the cation velocity, based on the electrode-electrolyte interface reference frame, is pointed opposite to the current flow. However, when solvent motion is taken into account, the cation velocity, based on the same reference frame, is in the same direction as the current. This analysis demonstrates the importance of accounting for solvent velocity rigorously in seemingly simple systems such as symmetric cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

3D Tomography insights on particle-particle bonding in cold spray

The conditions of the target surface during cold spray affect deformation and bonding. While surface preparation can influence the adhesion of the first particles, such modification is not relevant to the particle-particle interfaces that dominate the growth of a coating. Here we study two-particle Cu stacks produced with a single-particle launch apparatus and compare them to single-particle experiments on a clean polished substrate. Serial cross-sectioning using microtomography permits a systematic evaluation and quantification of bonding at the particle-particle interfaces. We observe that the top particle in the two-particle stacks is much more flattened compared to single impacts on the polished substrate. Although the resulting interfacial area expansion is comparable to that of single impacts at the same velocities, bonding at the particle-particle interfaces is significantly less (never exceeding 18% even around the “optimal” velocity for bonding). Lastly, we find that hydrodynamic jetting, a form of localization known to promote adhesion in cold spray, is hindered for impacts on top of a prior particle deposition. Here, the results point to a need for future studies that separately consider topography and mechanical properties of substrates in the pursuit of optimal bonding.

Bonding↗

DOE OSTI2020

An implicit, sharp numerical treatment of viscous terms at arbitrarily shaped liquid-gas interfaces in evaporative flows

We report a novel methodology for accurate treatment of viscous terms in evaporation problems. The proposed scheme is an extension of the sharp viscous treatment of Kang et al. (2000) [7] to 3D phase change problems. To ensure accuracy and grid converging solutions, a new implicit approach to computing viscous fluxes across the phase interfaces is proposed, which was previously unavailable in fixed grid numerical schemes. Analytical relations were derived for the jump in velocity gradients across the 2D and 3D phase interfaces, an important constituent of the proposed scheme. The relations show a non-vanishing jump in the tangential gradients across the phase interface that are associated with evaporative flux and interfacial curvature. The proposed methodology demonstrated first order accuracy in canonical test cases. It is general and applicable to arbitrarily oriented interfaces, and can be readily implemented in existing evaporation flow solvers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

An analysis of the spatio-temporal resolution of the immersed boundary method with direct forcing

The immersed boundary method (IBM) with direct forcing is very popular in the simulation of rigid particulate flows. In the IBM, an interaction force is introduced at the interface between fluid and particle in order to approximate the no-slip boundary condition. The interaction force is calculated through dividing the velocity difference (or error) between fluid and particle at the interface by the time step. Here, a dynamic equation for the velocity difference is derived. Additionally, analyses on the dynamic equation provide a few new findings: (i) The interaction force is the solution of a least-squares error problem, with the direct implication that the Lagrangian marker distribution has no effect on the large scale flow structure once the distribution of Lagrangian markers become saturated along the interface (i.e., each marker remains properly correlated with all its neighbors); (ii) The Lagrangian volume-weight is a relaxation factor to control how fast the velocity error decays to the ideal value of zero; (iii) The optimal choice of the Lagrangian volume-weight is the largest value permissible by a stability condition. A comprehensive convergence analysis with regard to the spatial and temporal resolution is presented for the velocity error and also for the shear-stress and surface pressure. In three simple canonical problems, it is analytically and numerically shown that the IBM results converge to the theoretical solutions obtained with precise imposition of no-slip and no-penetration boundary conditions. It is observed that it is not necessary to match the Lagrangian marker volume-weight to that of the local Eulerian cell volume and in fact this matching leads to lower than optimal computational efficiency. However, it is found that extremely high Eulerian grid resolution and small time step have to be used to obtain high precision simulation results. Especially, the time step should be inversely proportional to the particle Reynolds number for low Reynolds number flows. For high frequency oscillation problems, the grid size needs to be reduced by a factor of the square root of the frequency, and the time step to be reduced by a factor of the frequency. The theoretical findings here can be used to alleviate the technical difficulties in simulating non-spherical particles by not requiring the Lagrangian marker distribution to match the Eulerian grids and also in the implementation of IBM on non-uniform Eulerian grids. The present work also provides simple practical guidance on the choice of temporal and spatial resolution so as to control the simulation error a priori.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

A high-order Shifted Interface Method for Lagrangian shock hydrodynamics

Here, we present a new method for two-material Lagrangian hydrodynamics, which combines the Shifted Interface Method (SIM) with a high-order Finite Element Method. Our approach relies on an exact (or sharp) material interface representation, that is, it uses the precise location of the material interface. The interface is represented by the zero level-set of a continuous high-order finite element function that moves with the material velocity. This strategy allows to evolve curved material interfaces inside curved elements. By reformulating the original interface problem over a surrogate (approximate) interface, located in proximity of the true interface, the SIM avoids cut cells and the associated problematic issues regarding implementation, numerical stability, and matrix conditioning. Accuracy is maintained by modifying the original interface conditions using Taylor expansions. We demonstrate the performance of the proposed algorithms on established numerical benchmarks in one, two and three dimensions.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Multi-scale characterization and simulation of impact welding between immiscible Mg/steel alloys

Vaporizing foil actuator spot welding method is used in this paper to join magnesium alloy AZ31 and uncoated high-strength steel DP590, which are typically considered as un-weldable due to their high physical property disparities, low mutual solubility, and the lack of any intermetallic phases. Characterization results from scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) of the weld interface indicate that the impact creates an Mg nanocrystalline interlayer with abundant Fe particles. The interlayer exhibits intact bonding with both DP590 and AZ31 substrates. To investigate the fundamental bond formation mechanisms at the interface, a finite element (FE)-based process simulation is first performed to calculate the local temperature and deformation at the interface under the given macroscopic experimental condition. Finally, taking the FE results at the interface as inputs, molecular dynamics (MD) simulations are conducted to study the interlayer formation at the Mg/Fe interface during the impact and cooling. The results found a high velocity shearing-induced mechanical mixing mechanism that mixes Mg/Fe atoms at the interface and creates the interlayer, leading to the metallurgical bond between Mg/steel alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2024

A theoretical/computational framework to measure SiO2 and MgO viscosity at high pressure

The convection of the mantle of Earth and super-Earths is important for many terrestrial phenomena, from plate tectonics to outgassing. Rheological properties, such as viscosity, regulate the transport of thermal energy and mass. However, the viscosity of mantle-relevant materials, such as MgO, at relevant pressures (>120 GPa) are not well constrained. The objective of this work was to develop a computational platform to simulate novel experiments aiming to measure the viscosity of MgO at high pressures. Experiments performed by our collaborators at Johns Hopkins University and Lawrence Livermore National Laboratory use the OMEGA EP laser facility to shock a corrugated MgO interface to 170 GPa, with resulting velocity evolution governed by the viscous Richtmyer-Meshkov instability. We used an in-house hydrocode to simulate this process and thus provide a bound on viscosity by comparing our simulations results to these experiments, as well as to examine the physical processes at play. We simulated the experiments with different values of MgO viscosity (from inviscid to 10,000 Pa∙s) while taking into account the unsteady laser pulse, the material's equation of state, and the rate-dependent constitutive relation for MgO, and the materials' equations of state. Our results suggest that MgO at these conditions has a viscosity within an order of magnitude of 5000 Pa∙s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗