Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inertial Confinement Fusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Reduced instability growth and improved radiation trapping with optimized shock timing in double-shell inertial confinement fusion capsules

The double shell is a volume-burn inertial confinement fusion concept consisting of two concentric shells: a low-Z outer shell that collides with and transfers momentum to a high-Z inner shell which compresses and heats the thermonuclear fuel. The increased number of capsule interfaces and severe hydrodynamic instability of the high-density pusher during its acceleration phase provide challenges to the success of the double shell. Two-dimensional radiation-hydrodynamics simulations predict the hydrodynamic instability growth on the outer surface of the pusher can be greatly reduced through appropriate timing of two shocks that cross this interface. One of these shocks, unique to multi-shell designs, arises from radiation-driven ablation of the inner shell ahead of the main shock, the second shock of concern. The shock timing is optimized by increasing the thickness of a low-Z tamper layer exterior to the pusher, resulting in only minimal changes to the implosion timing. Reducing the instability growth on the outer surface of the high-Z pusher can dramatically decrease the modulations that feedthrough to the pusher inner surface, improving the efficacy of radiation trapping in the thermonuclear fuel and increasing the predicted thermonuclear yield by ≳20×.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Improved modeling of the solid-to-plasma transition of polystyrene ablator for laser direct-drive inertial confinement fusion hydrocodes

We report that the target performance of laser direct-drive inertial confinement fusion (ICF) can be limited by the development of hydrodynamic instabilities resulting from the nonhomegeneous laser absorption at the target surface, i.e., the laser imprint on the ablator. To understand and describe the formation of these instabilities, the early ablator evolution during the laser irradiation should be considered. In this work, an improved modeling of the solid-to-plasma transition of a polystyrene ablator for laser direct-drive ICF is proposed. This model is devoted to be implemented in hydrocodes dedicated to ICF which generally assume an initial plasma state. The present approach consists of the two-temperature model coupled to the electron, ion and neutral dynamics including the chemical fragmentation of polystyrene. The solid-to-plasma transition is shown to significantly influence the temporal evolution of both free electron density and temperatures, which can lead to different shock formation and propagation compared with an initial plasma state. The influence of the solid-to-plasma transition on the shock dynamics is evidenced by considering the scaling law of the pressure with respect to the laser intensity. The ablator transition is shown to modify the scaling law exponent compared with an initial plasma state.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Modeling of a spatially resolved ion temperature diagnostic for inertial confinement fusion

Here, the performance of modern laser-driven inertial confinement fusion (ICF) experiments is degraded by contamination of the deuterium–tritium (DT) fuel with high-Z material during compression. Simulations suggest that this mix can be described by the ion temperature distribution of the implosion, given that such contaminants deviate in temperature from the surrounding DT plasma. However, existing neutron time-of-flight (nTOF) diagnostics only measure the spatially integrated ion temperature. This paper describes the techniques and forward modeling used to develop a novel diagnostic imaging system to measure the spatially resolved ion temperature of an ICF implosion for the first time. The technique combines methods in neutron imaging and nTOF diagnostics to measure the ion temperature along one spatial dimension at yields currently achievable on the OMEGA laser. A detailed forward model of the source and imaging system was developed to guide instrument design. The model leverages neutron imaging reconstruction algorithms, radiation hydrodynamics and Monte Carlo simulations, optical ray tracing, and more. The results of the forward model agree with the data collected on OMEGA using the completed diagnostic. The analysis of the experimental data is still ongoing and will be discussed in a separate publication.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Gamma-ray measurements for inertial confinement fusion applications

High-energy γ rays generated from inertial confinement fusion (ICF) experiments have become an important signature for studying the dynamics of implosion processes. Due to their high-energy and penetrating nature, γ rays are the most unperturbed fusion products, which can preserve the original birth information of the fusion process. Fusion γ rays provide a direct measure of nuclear reaction rates (unlike x rays) without being compromised by Doppler spreading (unlike neutrons). However, unambiguous γ-ray measurements for ICF study further required a decade-long period of technological development, which included a deepening understanding of fusion γ-ray characteristics and innovations in instrument performance. This review article introduces the production mechanism of the prompt and secondary γ rays and various ICF performance parameters (e.g., bang time and burn width), which can be derived from γ-ray measurement. A technical overview will be followed by summarizing γ-ray detectors fielded or proposed, especially for high-yield ICF experiments at the Omega Laser Facility and National Ignition Facility. Over the past few years, γ-ray diagnostic technologies have been extended beyond ICF research. A few examples of non-ICF applications of γ-ray detectors are introduced at the end of this article.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Performance scaling with an applied magnetic field in indirect-drive inertial confinement fusion implosions

Magnetizing a cryogenic deuterium–tritium (DT)-layered inertial confinement fusion (ICF) implosion can improve performance by reducing thermal conduction and improving DT-alpha confinement in the hot spot. A room-temperature, magnetized indirect-drive ICF platform at the National Ignition Facility has been developed, using a high-Z, high-resistivity AuTa 4 alloy as the hohlraum wall material. Experiments show a 2.5× increase in deuterium–deuterium (DD) neutron yield and a 0.8-keV increase in hot-spot temperature with the application of a 12-T B-field. Further, for an initial 26-T B-field, we observed a 2.9× yield increase and a 1.1-keV temperature increase, with the inferred burn-averaged B-field in the compressed hot spot estimated to be 7.1 ± 1.8 kT using measured primary DD-n and secondary DT-n neutron yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Nuclear diagnostics for Inertial Confinement Fusion (ICF) plasmas

The field of nuclear diagnostics for Inertial Confinement Fusion (ICF) is broadly reviewed from its beginning in the seventies to present day. During this time, the sophistication of the ICF facilities and the suite of nuclear diagnostics have substantially evolved, generally a consequence of the efforts and experience gained on previous facilities. As the fusion yields have increased several orders of magnitude during these years, the quality of the nuclear-fusion-product measurements has improved significantly, facilitating an increased level of understanding about the physics governing the nuclear phase of an ICF implosion. The field of ICF has now entered an era where the fusion yields are high enough for nuclear measurements to provide spatial, temporal and spectral information, which have proven indispensable to understanding the performance of an ICF implosion. At the same time, the requirements on the nuclear diagnostics have also become more stringent. To put these measurements into context, this review starts by providing some historical remarks about the field of ICF and the role of nuclear diagnostics, followed by a brief overview of the basic physics that characterize the nuclear phase and performance of an ICF implosion. A technical discussion is subsequently presented of the neutron, gamma-ray, charged-particle and radiochemistry diagnostics that are, or have been, routinely used in the field of ICF. This discussion is followed by an elaboration of the current view of the next-generation nuclear diagnostics. Since the seventies, the overall progress made in the areas of nuclear diagnostics and scientific understanding of an ICF implosion has been enormous, and with the implementation of new high-fusion-yield facilities world-wide, the next-generation nuclear diagnostics will play an even more important role for decades to come.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

An antiproton catalyst for inertial confinement fusion propulsion

This paper discusses the concept of an inertial confinement fusion propulsion system involving an antiproton catalyst (for antiproton-induced fission). It is argued that, when the two processes, fusion and antimatter annihilation, are combined into one system, a viable candidate propulsion system for planetary exploration emerges. It is shown that as much as 7.6 GW of power, well within the requrements for interplanetary travel, can be achieved using existing driver technologies and available quantities of antiprotons.

Lewis, Raymond A.↗
DOE OSTI2020

Hybrid indirect-drive/direct-drive target for inertial confinement fusion

A hybrid indirect-drive/direct drive for inertial confinement fusion utilizing laser beams from a first direction and laser beams from a second direction including a central fusion fuel component; a first portion of a shell surrounding said central fusion fuel component, said first portion of a shell having a first thickness; a second portion of a shell surrounding said fusion fuel component, said second portion of a shell having a second thickness that is greater than said thickness of said first portion of a shell; and a hohlraum containing at least a portion of said fusion fuel component and at least a portion of said first portion of a shell; wherein said hohlraum is in a position relative to said first laser beam and to receive said first laser beam and produce X-rays that are directed to said first portion of a shell and said fusion fuel component; and wherein said fusion fuel component and said second portion of a shell are in a position relative to said second laser beam such that said second portion of a shell and said fusion fuel component receive said second laser beam.

Perkins, Lindsay John↗
DOE OSTI2026

Fully Additively Manufactured Wetted Foam Capsules for Inertial Confinement Fusion

In the pursuit of realizing reliable clean energy generation via inertial confinement fusion (ICF), wetted foam (WF) capsule targets have long been coveted due to their potential to simplify the target fielding process and suppress hydrodynamic instabilities and material mixing that limit achievable energy output, yet producing and deploying a WF target has proven challenging. Here, in this work, we demonstrate the design, fabrication, metrology, and testing of fully additively manufactured (AM) foam-lined capsules using two-photon polymerization (2PP) for ICF. We successfully fielded an AM polymeric foam capsule with a 3-mm outer diameter, a nominally 15-µm-thick solid outer layer, a 120-µm-thick inner foam layer, and a 250-µm outer diameter copper fill tube on the National Ignition Facility for a polar direct-drive shot, and we showcase deuterium wetting of the capsule foam layer inside an ignition target proofing station. Our exploration showed that 2PP can produce fieldable targets with complex geometries and potentially shorten the design iteration turnaround time and the overall target fabrication time.

Target↗
DOE OSTI2025

Sputter deposition of ultrathick Bi coatings onto rotating substrates for inertial confinement fusion

Sputter-deposited Bi is a potential candidate material for the production of inertial confinement fusion (ICF) hohlraums, which are sphero-cylindrical canisters that serve as the housing for hydrogen-fuel-filled capsules in ICF implosions. The fabrication of hohlraums involves deposition onto rotating sphero-cylindrical substrates and, hence, requires an understanding of oblique angle deposition phenomena. Here, we systematically study the effect of dynamic substrate tilt on properties of Bi films deposited onto rotating planar substrates. Results show that film morphology, porosity, and electrical resistivity depend on substrate tilt. In comparison with films deposited onto substrates adhered to a stationary sample holder, films deposited on rotating substrates have more uniform microstructure with fewer void defects. Based on Monte Carlo simulations, these changes in film morphology and microstructure are attributed to averaging and geometric effects related to sample position and rotation. In conclusion, the fabrication of an ∼ 50-µm-thick Bi film on a rotating sphero-cylindrical mandrel demonstrates a significant step toward the production of Bi hohlraums.

Bismuth↗
DOE OSTI2022

Optimization of irradiation configuration using spherical t-designs for laser-direct-drive inertial confinement fusion

Abstract A new class of beam configurations is proposed for symmetric-direct-drive inertial confinement fusion laser systems. These configurations are based on spherical t -designs that are studied in spherical design theory in mathematics (Delsarte et al 1977 Geom. Dedicata 6 363). Employing t -design configurations offers elimination of spherical-harmonic intensity modulations for modes ℓ ⩽ t . Additionally, these configurations provide fast decay of intensity nonuniformities with increasing number of beams and symmetric intensity patterns on the surface of the target. Methods developed in spherical design theory offer a convenient, systematic way of obtaining beam configurations for an arbitrary number of beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Direct Measurements of DT Fuel Preheat from Hot Electrons in Direct-Drive Inertial Confinement Fusion

Hot electrons generated by laser-plasma instabilities degrade the performance of laser-fusion implosions by preheating the DT fuel and reducing core compression. The hot-electron energy deposition in the DT fuel has been directly measured for the first time by comparing the hard x-ray signals between DT-layered and mass-equivalent ablator-only implosions. The electron energy deposition profile in the fuel is inferred through dedicated experiments using Cu-doped payloads of varying thickness. The measured preheat energy accurately explains the areal-density degradation observed in many OMEGA implosions. Furthermore, this technique can be used to assess the viability of the direct-drive approach to laser fusion with respect to the scaling of hot-electron preheat with laser energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Laboratory for Laser Energetics Targets Inertial Confinement Fusion

The University of Rochester’s Laboratory for Laser Energetics is targeting laser-driven inertial confinement fusion, as part of National Nuclear Security Administration’s Stockpile Stewardship Program and in the quest for clean sources of energy. The Laboratory for Laser Energetics (LLE) is home to two extremely powerful lasers—OMEGA and OMEGA EP—and researchers are using them to explore laser-driven inertial confinement fusion (ICF). ICF involves compressing a small amount of fuel consisting of hydrogen isotopes, deuterium (D), and tritium (T), and heating it to temperatures greater than the center of stars. “When these conditions are reached, the fuel undergoes fusion—releasing enormous energy that can be used for research relevant to the National Nuclear Security Administration’s (NNSA) Stockpile Stewardship Program (SSP) and to drive carbon-free power plants,” explains Valeri Goncharov, distinguished scientist and director of the Theory Division at LLE. LLE was established at the University of Rochester in 1970 and is the largest U.S. Department of Energy university-based research program in the nation, supported by the National Nuclear Security Administration as part of its Stockpile Stewardship Program (SSP). “As a center for exploring the interaction of intense radiation with matter, LLE is a unique national resource for research and education in science and technology,” says Goncharov. “Our current research includes exploring fusion for the SSP program and as a future source of energy, developing new laser and materials technologies, and pursuing a better understanding of high-energy-density phenomena.”

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Measurement of the sound velocity and Grüneisen parameter of polystyrene at inertial confinement fusion conditions

The principal Hugoniot, sound velocity, and Grüneisen parameter of polystyrene were measured at conditions relevant to shocks in inertial confinement fusion implosions, from 100 to 1000 GPa. The sound velocity is in good agreement with quantum molecular dynamics calculations and all tabular equation of state models at pressures below 200 GPa. Above 200 GPa, the experimental results agree with two of the examined tables, but do not agree with the most recent table developed for design of ICF experiments. The Grüneisen parameter increases with density below ~3.1 g/cm 3 and approaches the asymptotic value for an ideal gas after complete dissociation. This behavior is in good agreement with quantum molecular dynamics results and previous work but is not represented by any of the tabular models. Finally, the discrepancy between tabular models and experimental measurement of the sound velocity and Grüneisen parameter is sufficient to impact simulations of ICF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A future of inertial confinement fusion without laser-plasma instabilities

From the beginning of inertial confinement fusion (ICF) research, laser-plasma instabilities excited by narrowband lasers have limited the hydrodynamic design space of all laser-based approaches to inertial fusion energy (IFE). With advances in broadband laser technologies, the next generation of ICF drivers will likely have large bandwidth that is engineered to mitigate laser-plasma instabilities, thereby expanding the hydrodynamic design space to include both robust high yields (>200−MJ) with large-energy laser systems (>4 MJ) and high gains (>10) with moderate-energy laser facilities (<2 MJ). State-of-the-art simulations indicate that laser bandwidths of a few percent are required to mitigate instabilities for IFE-relevant conditions. To test these models and demonstrate that high-bandwidth lasers mitigate laser-plasma instabilities, the Fourth-generation Laser for Ultrabroadband eXperiments will be used with the OMEGA Laser System. The goal is to provide the community with the confidence to invest in a multiple-beam high-bandwidth laser facility that will demonstrate the necessary ablation pressures for robust direct-drive ignition without detrimental levels of hot electrons that degrade the implosion performance. It is important to recognize that the highest performing ICF implosions will likely never be completely LPI free because of the significant advantages to maximizing the laser intensity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Inertial Confinement Fusion: Status and Challenges

While a variety of laboratory-based fusion schemes have been studied for decades, the only fusion scheme yet to demonstrate fusion ignition and significant energy gain has been X-ray-driven inertially confined fusion. Ignition was demonstrated to occur at the thermodynamic conditions where it had long been expected, but the energy required for the implosion system to reach these conditions was more than projected years ago. This short review gives a status update on the three principal inertial confinement fusion schemes and research challenges going forward.

gain↗
DOE OSTI2020

Foam-lined hohlraum, inertial confinement fusion experiments on the National Ignition Facility

Experiments on the National Ignition Facility (NIF) to study hohlraums lined with a 20-mg/cc 400-μm-thick Ta 2 O 5 aerogel at full scale (hohlraum diameter = 6.72 mm) are reported. Driven with a 1.6-MJ, 450-TW laser pulse, the performance of the foam liner is diagnosed using implosion hot-spot symmetry measurements of the high-density carbon (HDC) capsule and measurement of inner beam propagation through a thin-wall 8-μm Au window in the hohlraum. Results show an improved capsule performance due to laser energy deposition further inside the hohlraum, leading to a modest increase in x-ray drive and reduced preheat due to changes in the x-ray spectrum when the foam liner is included. In addition, the outer cone bubble uniformity is improved, but the predicted improvement in inner beam propagation to improve symmetry control is not realized for this foam thickness and density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Cognitive simulation models for inertial confinement fusion: Combining simulation and experimental data

The design space for inertial confinement fusion (ICF) experiments is vast, and experiments are extremely expensive. Researchers rely heavily on computer simulations to explore the design space in search of high-performing implosions. However, ICF multiphysics codes must make simplifying assumptions, and thus deviate from experimental measurements for complex implosions. For more effective design and investigation, simulations require input from past experimental data to better predict future performance. In this work, we describe a cognitive simulation method for combining simulation and experimental data into a common, predictive model. This method leverages a machine learning technique called “transfer learning,” the process of taking a model trained to solve one task, and partially retraining it on a sparse dataset to solve a different, but related task. In the context of ICF design, neural network models are trained on large simulation databases and partially retrained on experimental data, producing models that are far more accurate than simulations alone. Here, we demonstrate improved model performance for a range of ICF experiments at the National Ignition Facility and predict the outcome of recent experiments with less than 10% error for several key observables. We discuss how the methods might be used to carry out a data-driven experimental campaign to optimize performance, illustrating the key product—models that become increasingly accurate as data are acquired.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗