Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Bias in bonding behavior among boron, carbon, and nitrogen atoms in ion implanted a-BN, a-BC, and diamond like carbon films

In this study, we implanted N{sup +} and N{sub 2}{sup +} ions into sputter deposited amorphous boron carbide (a-BC) and diamond like carbon (DLC) thin films in an effort to understand the chemical bonding involved and investigate possible phase separation routes in boron carbon nitride (BCN) films. In addition, we investigated the effect of implanted C{sup +} ions in sputter deposited amorphous boron nitride (a-BN) films. Implanted ion energies for all ion species were set at 40 KeV. Implanted films were then analyzed using x-ray photoelectron spectroscopy (XPS). The changes in the chemical composition and bonding chemistry due to ion-implantation were examined at different depths of the films using sequential ion-beam etching and high resolution XPS analysis cycles. A comparative analysis has been made with the results from sputter deposited BCN films suggesting that implanted nitrogen and carbon atoms behaved very similar to nitrogen and carbon atoms in sputter deposited BCN films. We found that implanted nitrogen atoms would prefer bonding to carbon atoms in the films only if there is no boron atom in the vicinity or after all available boron atoms have been saturated with nitrogen. Implanted carbon atoms also preferred to either bond with available boron atoms or, more likely bonded with other implanted carbon atoms. These results were also supported by ab-initio density functional theory calculations which indicated that carbon-carbon bonds were energetically preferable to carbon-boron and carbon-nitrogen bonds.

36 MATERIALS SCIENCE↗

On the photoluminescence of InBO3 and TbBO3 doped by Eu3+ and Ce3+

Highlights: • InBO{sub 3} changes its crystal structure from calcite to high temperature vaterite by the incorporation of Eu{sup 3+} or Tb{sup 3+}. • The intensity of the {sup 5}D{sub 0} → {sup 7}F{sub 2} transitions of Eu{sup 3+} are enhanced due to a reduction of the local symmetry at the activator's lattice site. • Doping Ce{sup 3+} into TbBO{sub 3}:Eu{sup 3+} results in a complete change of the absorption spectra in the near UV range due to the intense 4f-5d transitions of Ce{sup 3+}. • Efficient energy transfer occurs in the chain Ce{sup 3+} → Tb{sup 3+} → Eu{sup 3+}. • Even though a metal-to-metal CT between Ce{sup 3+} and Eu{sup 3+} is known to quench the photoluminescence of Eu{sup 3+}, a quantum yield of about 50% was determined. - Abstract: This work concerns ortho-borates according to the compositions InBO{sub 3}:Eu{sup 3+}, InBO{sub 3}:Eu{sup 3+},Tb{sup 3+}, and InBO{sub 3}:Eu{sup 3+},Tb{sup 3+},Ce{sup 3+}. All samples were investigated with respect to their structure type and spectroscopic properties. It turned out that InBO{sub 3} changes its crystal structure from calcite to high temperature vaterite by the incorporation of Eu{sup 3+} or Tb{sup 3+}. At the same time, novel excitation bands arise caused by optical transitions originating from the presence of Eu{sup 3+} or Tb{sup 3+}. The intensity of the {sup 5}D{sub 0} → {sup 7}F{sub 2} transition of Eu{sup 3+} is enhanced due to the change of the crystal system. Doping Ce{sup 3+} into TbBO{sub 3}:Eu{sup 3+} results in a complete change of the absorption spectra caused by the 4f-5d transition of Ce{sup 3+}. These findings open up the possibility to employ the energy transfer chain Ce{sup 3+} → Tb{sup 3+} → Eu{sup 3+}. Even though a metal-to-metal CT between Ce{sup 3+} and Eu{sup 3+} is well known to quench the photoluminescence of Eu{sup 3+}, we found a quantum yield of about 50%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Empirical modeling of the cross section of damage formation in ion implanted III-V semiconductors

In this letter, the cross section of damage formation per individual ion is measured for III-V compound semiconductors ion implanted at 15 K, applying Rutherford backscattering spectrometry. An empirical model is proposed that explains the measured cross sections in terms of quantities representing the primary energies deposited in the displacement of lattice atoms and in electronic interactions. The resulting formula allows the prediction of damage formation for low temperatures and low ion fluences in these materials and can be taken as a starting point for further quantitative modeling of damage formation including secondary effects such as temperature and ion flux.

36 MATERIALS SCIENCE↗

Negative oxygen ion formation in reactive magnetron sputtering processes for transparent conductive oxides

Reactive d.c. magnetron sputtering in Ar/O{sub 2} gas mixtures has been investigated with energy-resolved mass spectrometry. Different metal targets (Mg, Ti, Zn, In, InSn, and Sn), which are of importance for transparent conductive oxide thin film deposition, have been used to study the formation of negative ions, mainly high-energetic O{sup -}, which are supposed to induce radiation damage in thin films. Besides their energy distribution, the ions have been particularly investigated with respect to their intensity in comparison of the different target materials. To realize the comparability, various calibration factors had to be introduced. After their application, major differences in the negative ion production have been observed for the target materials. The intensity, especially of O{sup -}, differs by about two orders of magnitude. It is shown that this difference results almost exclusively from ions that gain their energy in the target sheath. Those may gain additional energy from the sputtering process or reflection at the target. Low-energetic negative ions are, however, less affected by changes of the target material. The results concerning O{sup -} formation are discussed in term of the sputtering rate from the target and are compared to models for negative ion formation.

36 MATERIALS SCIENCE↗

Effect of nitrogen ion implantation on the structural and optical properties of indium oxide thin films

: We report here synthesis and subsequent nitrogen ion implantation of indium oxide (In{sub 2}O{sub 3}) thin films. The films were implanted with 25 keV N{sup +} beam for different ion doses between 3E15 to 1E16 ions/cm{sup 2}. The resulting changes in structural and optical properties were investigated using XRD, SEM-EDAX and UV-Vis Spectrometry. XRD studies reveal decrease in crystallite size from 20.06 to 12.42 nm with increase in ion dose. SEM micrographs show an increase in the grain size from 0.8 to 1.35 µm with increase in ion dose because of the agglomeration of the grains. Also, from EDAX data on pristine and N-implanted thin films the presence of indium and oxygen without any traces of impurity elements could be seen. However, at lower ion doses such as 3E15 and 5E15 ions/cm{sup 2}, no evidence of the presence of nitrogen ion was seen. However, for the ion dose of 1E16 ions/cm{sup 2}, evidence of presence of nitrogen can be seen in the EDAX data. Band gap calculations reveal a decrease in band gap from 3.54 to 3.38 eV with increasing ion dose. However, the band gap was found to again show an increase to 3.58 eV at the highest ion dose owing to quantum confinement effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure-composition-luminescence correlations in Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}F (0.001{<=}x, y{<=}0.1) oxyfluorides

Luminescent materials composed of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}F (0.001{<=}x, y{<=}0.1) were prepared by the solid-state reaction method. After the replacement of Sr{sup 2+} and Al{sup 3+} ions by Sm{sup 3+} and In{sup 3+} ions in Sr{sub 2.5}Ba{sub 0.5}AlO{sub 4}F host structure, a novel charge-transfer band centered around 304 nm shifted from 240 nm is monitored; moreover, sharp and well-resolved emission peaks in the {sup 4}G{sub 5/2}{yields}{sup 6}H{sub J} transitions of the Sm{sup 3+} activator are observed. The diverse excitation and emission photoluminescence spectra of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}-{alpha}F1-{delta} (0.001{<=}x, y{<=}0.1) phosphors originated by the charge-transfer of the host to the Sm{sup 3+} activator, the f-f transitions in the Sm{sup 3+} ions, and the defect-induced self-activation are also introduced. - Graphical abstract: After the replacement of Sr{sup 2+} and Al{sup 3+} ions by Sm{sup 3+} and In{sup 3+} ions in Sr{sub 2.5}Ba{sub 0.5}AlO{sub 4}F host structure, a novel charge-transfer band centered around 304 nm shifted from 240 nm is monitored; moreover, sharp and well-resolved emission peaks in the {sup 4}G{sub 5/2}{yields}{sup 6}H{sub J} transitions of the Sm{sup 3+} activator are observed (Figure, Left). The diverse excitation and emission photoluminescence spectra of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}-{alpha}F1-{delta} (0.001{<=}x, y{<=}0.1) phosphors originated by the charge-transfer of the host to the Sm{sup 3+} activator, the f-f transitions in the Sm{sup 3+} ions, and the defect-induced self-activation are also introduced. Highlights: Black-Right-Pointing-Pointer Strong and well-resolved emitting peaks are monitored in Sm{sup 3+}-doped oxyfluoride phosphors. Black-Right-Pointing-Pointer Diverse excitation and emission spectra of the oxyfluoride phosphors originated from Sm{sup 3+} activator and the defect-induced self-activation were clearly monitored. Black-Right-Pointing-Pointer Oxyfluoride phosphors could be quite effective to prepare white-emitting light for (near)-UV LED applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrophobic amine-based binary mixtures of active pharmaceutical and food grade ingredients: characterization and application in indium extraction from aqueous hydrochloric acid media

The wide spread use of hazardous and expensive solvents for the liquid-liquid extraction (LLE) of critical metals has been a growing source of waste in the metal refinement industry. We have developed and characterized room temperature liquid hydrophobic binary mixtures based on common pharmaceutical and food grade compounds as sustainable, cost effective alternatives to both ionic liquids and conventional solvents. Additionally, we introduce liquid mixtures with Proton Sponge® (1,8-bis(dimethylamino)naphthalene), one of the strongest known organic bases. These mixtures have been applied to the LLE of indium(III) ions from hydrochloric acid solutions, displaying an extraction efficiency greater than 99% in some systems. Here, a systematic approach to identifying the underlying mechanism of extraction, in particular relating to the charge, solubility, and complexation of the indium species in the organic phase has been developed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Investigation of the chemical vicinity of crystal defects in ion-irradiated Mg and a Mg-Al-Zn alloy with coincident Doppler broadening spectroscopy

Crystal defects in magnesium and magnesium-based alloys such as AZ31 are of major importance for the understanding of their macroscopic properties. We have investigated defects and their chemical surrounding in Mg and AZ31 on an atomic scale with Doppler broadening spectroscopy of the positron annihilation radiation. In these Doppler spectra, the chemical information and the defect contribution have to be thoroughly separated. For this reason, samples of annealed Mg were irradiated with Mg ions in order to create exclusively defects. In addition, Al- and Zn-ion irradiation on Mg samples was performed in order to create samples with defects and impurity atoms. The ion-irradiated area on the samples was investigated with laterally and depth resolved positron Doppler broadening spectroscopy and compared with preceding SRIM simulations of the vacancy distribution, which are in excellent agreement. The investigation of the chemical vicinity of crystal defects in AZ31 was performed with coincident Doppler broadening spectroscopy by comparing Mg-ion-irradiated AZ31 with Mg-ion-irradiated Mg. No formation of solute-vacancy complexes was found due to the ion irradiation, despite the high defect mobility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Creepy (not KREEPy) Gold-Indium Intermetallic Compounds on Secondary Ion Mass Spectrometry Samples

A series of Secondary Ion Mass Spectrometry (SIMS) sessions to measure hydrogen (H) in Martian meteorite minerals was completed using the Cameca 6f SIMS and NanoSIMS 50L at Arizona State University (ASU). During these sessions, a “creeping” phenomenon has occurred, where the edges of samples pressed in indium are covered by a metal alloy. We summarize these observations herein, present a collection of preliminary data, and discuss explanations and concerns for future SIMS work. We conclude the report with a research plan for further study.

Dudley, J. M.↗

Mobility enhancement in crystalline In-Ga-Zn-oxide with In-rich compositions

The electron mobility of In-Ga-Zn-oxide (IGZO) is known to be enhanced by higher In content. We theoretically investigated the mobility-enhancement mechanism by proposing an In-Ga-Zn-disorder scattering model for an In-rich crystalline IGZO (In{sub 1+x}Ga{sub 1−x}O{sub 3}(ZnO){sub m} (0 < x < 1, m > 0)) thin film. The obtained theoretical mobility was found to be in agreement with experimental Hall mobility for a crystalline In{sub 1.5}Ga{sub 0.5}O{sub 3}(ZnO) (or In{sub 3}GaZn{sub 2}O{sub 8}) thin film. The mechanism specific to In-rich crystalline IGZO thin films is based on three types of Coulomb scattering potentials that originate from effective valence differences. In this study, the In-Ga-Zn-disorder scattering model indicates that the effective valence of the In{sup 3+} ions in In-rich crystalline IGZO thin films significantly affects their electron mobility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radio frequency plasma power dependence of the moisture permeation barrier characteristics of Al{sub 2}O{sub 3} films deposited by remote plasma atomic layer deposition

In the present study, we investigated the gas and moisture permeation barrier properties of Al{sub 2}O{sub 3} films deposited on polyethersulfone films (PES) by capacitively coupled plasma (CCP) type Remote Plasma Atomic Layer Deposition (RPALD) at Radio Frequency (RF) plasma powers ranging from 100 W to 400 W in 100 W increments using Trimethylaluminum [TMA, Al(CH{sub 3}){sub 3}] as the Al source and O{sub 2} plasma as the reactant. To study the gas and moisture permeation barrier properties of 100-nm-thick Al{sub 2}O{sub 3} at various plasma powers, the Water Vapor Transmission Rate (WVTR) was measured using an electrical Ca degradation test. WVTR decreased as plasma power increased with WVTR values for 400 W and 100 W of 2.6 × 10{sup −4} gm{sup −2}day{sup −1} and 1.2 × 10{sup −3} gm{sup −2}day{sup −1}, respectively. The trends for life time, Al-O and O-H bond, density, and stoichiometry were similar to that of WVTR with improvement associated with increasing plasma power. Further, among plasma power ranging from 100 W to 400 W, the highest power of 400 W resulted in the best moisture permeation barrier properties. This result was attributed to differences in volume and amount of ion and radical fluxes, to join the ALD process, generated by O{sub 2} plasma as the plasma power changed during ALD process, which was determined using a plasma diagnosis technique called the Floating Harmonic Method (FHM). Plasma diagnosis by FHM revealed an increase in ion flux with increasing plasma power. With respect to the ALD process, our results indicated that higher plasma power generated increased ion and radical flux compared with lower plasma power. Thus, a higher plasma power provides the best gas and moisture permeation barrier properties.

36 MATERIALS SCIENCE↗

Ion distribution measurements to probe target and plasma processes in electronegative magnetron discharges. I. Negative ions

Mass and energy spectra of negative ions in magnetron sputtering discharges have been investigated with an energy-dispersive mass spectrometer. The dc magnetrons have been operated in the same reactive Ar/O{sub 2} atmosphere but with three different target materials: Cu, In, and W. Besides negative ions of the working gas, a variety of target metal containing negative molecular ions were found in the discharge. Their occurrence is strongly dependent on the target material. It has been correlated to the electron affinity and the bond strength of the molecules which has been calculated by density functional theory. Energy spectra of the negative ions exhibit three contributions that are clearly distinguishable. Their different origin is discussed as electron attachment in the gas phase and at the target surface, and molecule fragmentation during transport from target to substrate. The latter two contributions again significantly deviate for different target material. The high-energy part of the spectra has been analyzed with respect to the energy the particles gain upon release from the surface. It suggests that bigger molecules formed on the surface are released by ion-assisted desorption.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of rock-salt type lithium borohydride and its peculiar Li{sup +} ion conduction properties

The high energy density and excellent cycle performance of lithium ion batteries makes them superior to all other secondary batteries and explains why they are widely used in portable devices. However, because organic liquid electrolytes have a higher operating voltage than aqueous solution, they are used in lithium ion batteries. This comes with the risk of fire due to their flammability. Solid electrolytes are being investigated to find an alternative to organic liquid. However, the nature of the solid-solid point contact at the interface between the electrolyte and electrode or between the electrolyte grains is such that high power density has proven difficult to attain. We develop a new method for the fabrication of a solid electrolyte using LiBH{sub 4,} known for its super Li{sup +} ion conduction without any grain boundary contribution. The modifications to the conduction pathway achieved by stabilizing the high pressure form of this material provided a new structure with some LiBH{sub 4}, more suitable to the high rate condition. We synthesized the H.P. form of LiBH{sub 4} under ambient pressure by doping LiBH{sub 4} with the KI lattice by sintering. The formation of a KI - LiBH{sub 4} solid solution was confirmed both macroscopically and microscopically. The obtained sample was shown to be a pure Li{sup +} conductor despite its small Li{sup +} content. This conduction mechanism, where the light doping cation played a major role in ion conduction, was termed the “Parasitic Conduction Mechanism.” This mechanism made it possible to synthesize a new ion conductor and is expected to have enormous potential in the search for new battery materials.

36 MATERIALS SCIENCE↗

Influence of plasma-activated nitrogen species on PA-MOCVD of InN

We report on the influence of various plasma species on the growth and structural properties of indium nitride in plasma-assisted metalorganic chemical vapor deposition. Atomic emission spectroscopy was used to quantify the molecular, neutral, and ionized nitrogen species concentrations above the growth surface. Reflectance and Raman spectroscopy and X-ray diffraction techniques were used to characterize the grown InN films. It has been found that ionized rather than molecular or neutral nitrogen species is positively correlated with the InN growth rate. We conclude that InN formation in the present case is due to the chemical combination of atomic nitrogen ions with indium.

Ahmad, Z.↗

In situ corrosion analysis of Al-Zn-In-Mg-Ti-Ce sacrificial anode alloy

The corrosion behaviour of Al-5Zn-0.02In-1Mg-0.05Ti-0.5Ce (wt.%) alloy has been investigated by immersion test, scanning electron microscopy, energy dispersive X-ray detector, electrochemical impedance spectroscopy and electrochemical noise. The results show that there exist different corrosion types of the alloy in 3.5% NaCl solution with the immersion time. At the initial stage of immersion, pitting due to the precipitates predominates the corrosion with a typical inductive loop at low frequencies in electrochemical impedance spectroscopy. The major precipitates of the alloy are MgZn{sub 2} and Al{sub 2}CeZn{sub 2} particles. The corrosion potentials of the bulk MgZn{sub 2} and Al{sub 2}CeZn{sub 2} alloys are negative with respect to that of {alpha}-Al, so the MgZn{sub 2} and Al{sub 2}CeZn{sub 2} precipitates can act as activation centre and cause the pitting. In the late corrosion, a relative uniform corrosion predominates the corrosion process controlled by the dissolution/precipitation of the In ions and characterized by a capacitive loop at medium-high frequencies in electrochemical impedance spectroscopy. The potential noise of the pitting shows larger amplitude fluctuation and lower frequency, but the potential noise of the uniform corrosion occurs with smaller amplitude fluctuation and higher frequency.

36 MATERIALS SCIENCE↗

A Multiscale Approach to the Physics of Radiation Damage

A multiscale approach to the phenomena relevant to radiation damage as a result of irradiation of tissue with ions is overviewed. This approach is aimed at understanding the scenario of physical, chemical, and biological effects taking place after energetic ions deposit their energy in the tissue. A quantitative picture is very much desired for applications in ion-beam cancer therapy and analysis of radiation safety in space. We present a brief history of our approach including the latest achievements and give an overlook for the future development of this method.

60 APPLIED LIFE SCIENCES↗

Dust particle diffusion in ion beam transport region

Dust particles of μm size produced by a monoplasmatron ion source are observed by a laser light scattering. The scattered light signal from an incident laser at 532 nm wavelength indicates when and where a particle passes through the ion beam transport region. As the result, dusts with the size more than 10 μm are found to be distributed in the center of the ion beam, while dusts with the size less than 10 μm size are distributed along the edge of the ion beam. Floating potential and electron temperature at beam transport region are measured by an electrostatic probe. This observation can be explained by a charge up model of the dust in the plasma boundary region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗