Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Pulsed laser ablation of binary semiconductors: mechanisms of vaporisation and cluster formation

Formation of small clusters during pulsed ablation of two binary semiconductors, zinc oxide and indium phosphide, in vacuum by UV, visible, and IR laser radiation is comparatively studied. The irradiation conditions favourable for generation of neutral and charged Zn{sub n}O{sub m} and In{sub n}P{sub m} clusters of different stoichiometry in the ablation products are found. The size and composition of the clusters, their expansion dynamics and reactivity are analysed by time-of-flight mass spectrometry. A particular attention is paid to the mechanisms of ZnO and InP ablation as a function of laser fluence, with the use of different ablation models. It is established that ZnO evapourates congruently in a wide range of irradiation conditions, while InP ablation leads to enrichment of the target surface with indium. It is shown that this radically different character of semiconductor ablation determines the composition of the nanostructures formed: zinc oxide clusters are mainly stoichiometric, whereas In{sub n}P{sub m} particles are significantly enriched with indium. (photonics and nanotechnology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth, electrical and optical properties of a-plane InN on r-plane sapphire

The heteroepitaxy of a-plane (1120) InN films on r-plane (1102) sapphire substrates, by nitrogen radio frequency plasma-assisted molecular beam epitaxy, has been investigated and compared to that of c-plane (0001) InN. The epitaxial growth of a-plane InN proceeded through the nucleation, growth, and coalescence of three-dimensional islands, resulting in surface roughness that increased monotonically with epilayer thickness. The full width at half maximum of (1120) x-ray diffraction rocking curves decreased significantly with increasing InN thickness, characteristic of structural improvement, and it reached the value of 24 arcmin for a 1 {mu}m thick film. Hall-effect measurements exhibited a similar dependence of electron concentration and mobility on thickness for both the a- and c-plane InN films. The analysis of the Hall-effect measurements, by considering the contribution of two conducting layers, indicates a similar accumulation of low mobility electrons with N{sub s}>10{sup 14} cm{sup -2} at the films' surface/interfacial region for both the a- and c-plane InN films. From optical transmittance measurements, the absorption edge of 0.768 eV was determined for the 1 {mu}m a-plane film, consistent with the expected Burstein-Moss effect. Photoluminescence spectra exhibited a lower energy peak at 0.631 eV, suggesting defect-related transitions.

36 MATERIALS SCIENCE↗

Mg doped InN and confirmation of free holes in InN

We report a systematic investigation on Mg doped InN epilayers grown by radio-frequency plasma-assisted molecular beam epitaxy. Electrolyte capacitance voltage (ECV) combined with thermopower measurements find p-type conduction over an Mg concentration range. For InN:Mg in this p-type 'window' the Seebeck coefficients dramatically change their signs from negative to positive when the thickness of undoped InN interlayer decreases to zero. This notable sign change of Seebeck coefficient explains the previous inconsistency between ECV and thermopower results and confirms the existence of mobile holes in the InN:Mg. Taking into account the undoped InN interlayer, the hole density and mobility are extracted.

36 MATERIALS SCIENCE↗

Elemental distribution and oxygen deficiency of magnetron sputtered indium tin oxide films

The atomic structure and composition of noninterfacial ITO and ITO-Si interfaces were studied with transmission electron microscopy and x-ray photoelectron spectroscopy (XPS). The films were deposited by dc magnetron sputtering on monocrystalline p-type (100) Si wafers. Both as deposited and heat treated films consisted of crystalline ITO. The ITO/Si interface showed a more complicated composition. A thin layer of SiO{sub x} was found at the ITO/Si interface together with In and Sn nanoclusters, as well as highly oxygen deficient regions, as observed by XPS. High energy electron exposure of this area crystallized the In nanoclusters and at the same time increased the SiO{sub x} interface layer thickness.

36 MATERIALS SCIENCE↗

p-type conduction in sputtered indium oxide films

We report p-type conductivity in intrinsic indium oxide (IO) films deposited by magnetron sputtering on fused quartz substrates under oxygen-rich ambient. Highly oriented (111) films were studied by x-ray diffraction, optical absorption, and Hall effect measurements. We fabricated p-n homojunctions on these films.

36 MATERIALS SCIENCE↗

The influence of Sn doping on the growth of In{sub 2}O{sub 3} on Y-stabilized ZrO{sub 2}(100) by oxygen plasma assisted molecular beam epitaxy

The influence of Sn doping on the growth of In{sub 2}O{sub 3} on Y-stabilized ZrO{sub 2}(100) by oxygen plasma assisted molecular beam epitaxy has been investigated over a range of substrate temperatures between 650 and 900 deg. C. The extent of dopant incorporation under a constant Sn flux decreases monotonically with increasing substrate temperature, although the n-type carrier concentration in 'overdoped' films grown at 650 deg. C is lower than in films with a lower Sn concentration grown at 750 deg. C. The small increase in lattice parameter associated with Sn doping leads to improved matching with the substrate and suppresses breakup of the films into square islands observed in high temperature growth of undoped In{sub 2}O{sub 3} on Y-stabilized ZrO{sub 2}(100). Plasmon energies derived from infrared reflection spectra of Sn-doped films are found to be close to satellite energies in core level photoemission spectroscopy, but for a nominally undoped reference sample there is evidence for carrier accumulation at the surface. This influences both the In 3d core line shape and the intensity of a peak close to the Fermi energy associated with photoemission from the conduction band.

36 MATERIALS SCIENCE↗

Growth of the (In{sub 2}S{sub 3}){sub x}(FeIn{sub 2}S{sub 4}){sub 1-x} single crystals and properties of photoelectric structures on their basis

Complete mutual solubility in the (In{sub 2}S{sub 3}){sub x}(FeIn{sub 2}S{sub 4}){sub 1-x} system is established. The technology is developed, and single crystals of the continuous series of the (In{sub 2}S{sub 3}){sub x}(FeIn{sub 2}S{sub 4}){sub 1-x} solid solutions are grown for the first time. The linear dependence of the unit cell parameter of single crystals with a cubic spinel lattice on the solid solution composition is found. First, photosensitive Schottky barriers are fabricated, and then, based on studies of their photosensitivity, the character of band-to-band transition is discussed and the values of the band gap depending on the atomic composition are estimated. The possibility of using the obtained solid solutions as broadband photoconverters of optical radiation is revealed.

36 MATERIALS SCIENCE↗

Discovery of the (In{sub 2}S{sub 3}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} solid solutions and fabrication of photosensitive structures based on them

A technology of growing single crystals of (In{sub 2}S{sub 3}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} solid solutions that provides control over their atomic composition in the entire concentration range 0 {<=} x {<=} 1 is developed. It is shown that, in the range x = 0-1, the single crystals have the cubic spinel structure and the unit cell parameter a follows the linear dependence on x. The exponential character of the temperature dependence of resistivity of solid solutions, on which the first photosensitive Cu/(In{sub 2}S{sub 3})x(MnIn{sub 2}S{sub 4}){sub 1-x} structures are obtained, is revealed. The first photosensitivity spectra of these structures are obtained, and, based on these spectra, dependences of energy of the direct and indirect band-to-band transitions on the composition x are determined. The possibility of applying these structures in broad-band photoconverters of optical radiation is concluded.

36 MATERIALS SCIENCE↗

Dislocation reduction via selective-area growth of InN accompanied by lateral growth by rf-plasma-assisted molecular-beam epitaxy

We investigated the selective-area growth (SAG) of InN by rf-plasma-assisted molecular-beam epitaxy using molybdenum (Mo)-mask-patterned sapphire (0001) substrates, which resulted in the formation of regularly arranged N-polar InN microcrystals. Transmission electron microscopy observation confirmed that the laterally grown side areas were nearly dislocation-free, although many threading dislocations (10{sup 9}-10{sup 10} cm{sup -2}) were generated at the InN/sapphire interface and propagated into the center of the InN microcrystals along the crystal c-axis. The laterally grown InN microcrystals exhibited narrow near-IR emission spectra with a peak photon energy of 0.627 eV and a linewidth of 39 meV at room temperature.

36 MATERIALS SCIENCE↗

Defect redistribution in postirradiation rapid-thermal-annealed InN

We have applied positron annihilation to study point defects in 2 MeV {sup 4}He{sup +}-irradiated and subsequently rapid-thermal-annealed (RTA) InN grown by molecular-beam epitaxy. The irradiation fluences ranged from 5x10{sup 14} to 2x10{sup 16} cm{sup -2}. The irradiation primarily produces donor defects but the subjects of this work are the acceptor-type defects produced in lower concentrations: V{sub In}, in addition to negative-ion-type defects. The heat treatment results in a redistribution of the irradiation-induced point defects. The In vacancies near the film-substrate interface appear restructured after the RTA process, possibly influenced by growth defects near the interface, while deeper in the InN layer, the defects produced in the irradiation are partially removed in the annealing. This could be responsible for the improved transport properties of the annealed films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen In Group-III Nitrides: An Ion Beam Analysis Study

The doping mechanisms of InN, a promising material for novel optoelectronic and electronic devices, are still not well understood. Unintentional hydrogen doping is one possibility that could explain the unintentional n-type conductivity in high-quality nominally undoped InN films. We measured a series of state-of-the-art InN samples grown by molecular beam epitaxy with 2 MeV 4He-ERDA and RBS, showing the presence of relatively high amounts of hydrogen not only at the surface, but also in a deeper layer. Strong depletion of hydrogen due to the analysing beam was observed and taken into account in the analysis. Here, we report on the details of the analysis and show how the results correlate with the free-electron concentrations of the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation effects and interphase interactions in ohmic and barrier contacts to indium phosphide as induced by rapid thermal annealing and irradiation with {gamma}-ray {sup 60}Co photons

The radiation resistance of Au-Pd-Ti-Pd-n{sup ++}-InP ohmic contacts and Au-TiB{sub x}-n-n{sup +}-n{sup ++}-InP barrier contacts-both initial and subjected to a rapid thermal annealing and irradiated with {sup 60}Co {gamma}-ray photons with doses as high as 10{sup 9} R-has been studied. Before and after external effects, the electrical characteristics of the barrier and ohmic contacts, distribution profiles for components, and phase composition in the metallization layers have been measured. In ohmic Pd-Ti-Pd-Au contacts subjected to rapid thermal annealing and irradiation, a significant distortion of the layered structure of metallization occurs; this distortion is caused by the thermal and irradiation-stimulated transport of Pd over the grain boundaries in polycrystalline Ti and Au films. However, the specific contact resistance {rho}{sub c} does not change appreciably, which is related to a comparatively unvaried composition of the contact-forming layer at the Pd-n{sup +}-InP interface. In the initial sample and the sample subjected to the rapid thermal annealing at T = 400 deg. C with the Au-TiB{sub x}-n-n{sup +}-n{sup ++}-InP barrier contacts and irradiated with the dose as high as 2 x 10{sup 8} R, a layered structure of metallization is retained. After irradiation with the dose as high as 10{sup 9} R, in the samples subjected to a rapid thermal annealing at T = 400 deg. C, the layered structure of metallization becomes completely distorted; however, this structure is retained in the initial sample. The electrical properties of the contact structure appreciably degrade only after irradiation of the sample preliminarily subjected to a rapid thermal annealing at T = 400 deg. C.

36 MATERIALS SCIENCE↗

Lateral carrier confinement in InGaN quantum-well nanorods

We review our studies on lateral carrier diffusion in micro-fabricated samples of InGaN nanorods and their parent quantum wells. The carrier diffusion is observed to be strongly confined in nanorods, as manifested by the reduction in the delayed-rise component of time-resolved photoluminescence traces. We further argue that the confinement of carrier diffusion can be applied to suppress the efficiency droop related to defect state recombination and to assist in the energy transfer between InGaN nanorods and nanocrystal phosphors for color conversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation and properties of antiperovskite-type nitrides: InNNi{sub 3} and InNCo{sub 3}

Two antiperovskite-type ternary nitrides of InNM{sub 3} (M=Ni, Co) have been synthesized from In{sub 2}O{sub 3} and Ni or Co powders under NH{sub 3} atmosphere at 600 deg. C. InNCo{sub 3} is a new ternary nitride whereas InNNi{sub 3} was previously reported as InN{sub 0.5}Ni{sub 3} with different nitrogen content. The lattice parameters refined by Rietveld method are 3.8445(1) A for InNNi{sub 3} and 3.8541(7) A for InNCo{sub 3}, respectively. Both nitrides show metallic behaviors and below 70 K the T{sup 2} temperature dependence of resistivity was observed indicative of a Fermi liquid behavior. The temperature dependence of the field-cooling (FC) and zero-field-cooling (ZFC) magnetization and time decay of thermoremanent magnetization indicate the spin-glass-like behavior in InNM{sub 3} (M=Ni, Co). The freezing temperatures for this behavior, T{sub f}, are about 300 K for InNNi{sub 3} and 10 K for InNCo{sub 3}, respectively. - Graphical abstract: Two ternary nitrides InNM{sub 3} (M=Ni, Co) were synthesized by solid-gas reactions of metal powders with NH{sub 3}. Both InNNi{sub 3} and InNCo{sub 3} adopt the antiperovskite crystal structure, and measurements of magnetization indicate that they have spin-glass-like properties.

36 MATERIALS SCIENCE↗

Neutron diffraction studies of RSn{sub 1+x}Ge{sub 1-x} (R=Tb-Er) compounds

The magnetic structures of RSn{sub 1+x}Ge{sub 1-x} (R=Tb, Dy, Ho and Er, x{approx}0.1) compounds have been determined by neutron diffraction studies on polycrystalline samples. The data recorded in a paramagnetic state confirmed the orthorhombic crystal structure described by the space group Cmcm. These compounds are antiferromagnets at low temperatures. The magnetic ordering in TbSn{sub 1.12}Ge{sub 0.88} is sine-modulated described by the propagation vector k=(0.4257(2), 0, 0.5880(3)). Tb magnetic moment equals 9.0(1) {mu}{sub B} at 1.62 K. It lies in the b-c plane and form an angle {theta}=17.4(2) deg. with the c-axis. This structure is stable up to the Neel temperature equal to 31 K. The magnetic structures of RSn{sub 1+x}Ge{sub 1-x}, where R are Dy, Ho and Er at low temperatures are described by the propagation vector k=(1/2, 1/2, 0) with the sequence (++-+) of magnetic moments in the crystal unit cell. In DySn{sub 1.09}Ge{sub 0.91} and HoSn{sub 1.1}Ge{sub 0.9} magnetic moments equal 7.25(15) and 8.60(6) {mu}{sub B} at 1.55 K, respectively. The moments are parallel to the c-axis. For Ho-compound this ordering is stable up to T{sub N}=10.7 K. For ErSn{sub 1.08}Ge{sub 0.92}, the Er magnetic moment equals 7.76(7) {mu}{sub B} at T=1.5 K and it is parallel to the b-axis. At T{sub t}=3.5 K it tunes into the modulated structure described by the k=(0.496(1), 0.446(4), 0). With the increase of temperature there is a slow decrease of k{sub x} component and a quick decrease of k{sub y} component. The Er magnetic moment is parallel to the b-axis up to 3.9 K while at 4 K and above it lies in the b-c plane and form an angle 48(3) deg. with the c-axis. In compounds with R=Tb, Ho and Er the magnetostriction effect at the Neel temperature is observed. - Graphical abstract: The magnetic structures of RSn{sub 1+x}Ge{sub 1-x} (R=Tb, Dy, Ho and Er, x{approx}0.1) compounds have been determined by neutron diffraction studies on polycrystalline samples. The magnetic ordering in TbSn{sub 1.12}Ge{sub 0.88} (a) is sine-modulated described by the propagation vector k=(0.426, 0, 0.588). The magnetic structures of RSn{sub 1+x}Ge{sub 1-x} where R are Dy (b), Ho (b) and Er (c) at temperatures close to 1.5 K are described by the propagation vector k=(1/2, 1/2, 0) with the sequence (++-+) of magnetic moments in the crystal unit cell. For Ho- and Dy-compound this ordering is stable up to T{sub N} while for Er-compound at T{sub t}=3.5 K it tunes into a modulated structure (d). Highlights: > We determine crystal and magnetic structures of RSn{sub 1+x}Ge{sub 1-x} (R=Tb, Dy, Ho, Er, x{approx}0.1) compounds. > We compare the results with those for RT{sub x}X{sub 2} (X=Ge, Sn) compounds. > We examine the influence of other components (T, Sn, Ge) on magnetic ordering in R-sublattices. > Magnetic ordering in RSn{sub 1+x}Ge{sub 1-x} compounds is similar to those observed in RT{sub x}X{sub 2} compounds. > Other elements (T, Sn, Ge) have not got significant influence on stability of magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal data and indirect optical transitions in Tl{sub 2}InGaSe{sub 4} crystals

The room temperature crystal data and the optical properties of the Bridgman method grown Tl{sub 2}InGaSe{sub 4} crystals are reported and discussed. The X-ray diffraction technique has revealed that Tl{sub 2}InGaSe{sub 4} is a single phase crystal of monoclinic structure. The unit cell lattice parameters, which were recalculated from the X-ray data, are found to be a = 0.77244 nm, b = 0.64945 nm, c = 0.92205 nm and {beta} = 95.03{sup o}. The temperature dependence of the optical band gap of Tl{sub 2}InGaSe{sub 4} single crystal in the temperature region of 290-500 K has also been investigated. The absorption coefficient was calculated from the transmittance and reflectance data in the incident photon energy range of 1.60-2.10 eV. The absorption edge is observed to shift toward lower energy values as temperature increases. The fundamental absorption edge corresponds to indirect allowed transition energy gap of 1.86 eV that exhibited a temperature coefficient {gamma} = -3.53 x 10{sup -4} eV/K.

36 MATERIALS SCIENCE↗

Formation of grown-in defects in molecular beam epitaxial Ga(In)NP: Effects of growth conditions and postgrowth treatments

Effects of growth conditions and post-growth treatments, such as presence of N ions, N{sub 2} flow, growth temperature, In alloying, and postgrowth rapid thermal annealing (RTA), on formation of grown-in defects in Ga(In)NP prepared by molecular beam epitaxy are studied in detail by the optically detected magnetic resonance (ODMR) technique. Several common residual defects, such as two Ga-interstitial defects (i.e., Ga{sub i}-A and Ga{sub i}-B) and two unidentified defects with a g factor around 2 (denoted by S1 and S2), are closely monitored. Bombardment of impinging N ions on grown sample surface is found to facilitate formation of these defects. Higher N{sub 2} flow is shown to have an even more profound effect than a higher number of ions in introducing these defects. Incorporation of a small amount of In (e.g., 5.1%) in GaNP seems to play a minor role in the formation of the defects. In GaInNP with 45% of In; however, the defects were found to be abundant. Effect of RTA on the defects is found to depend on initial configurations of Ga{sub i}-related defects formed during the growth. In the alloys where the Ga{sub i}-A and Ga{sub i}-B defects are absent in the as-grown samples (i.e., GaNP grown at a low temperature of 460 deg. C), the concentrations of the two Ga{sub i} defects are found to increase after postgrowth RTA. This indicates that the defects originally introduced in the as-grown alloys have been transformed into the more thermally stable Ga{sub i}-A and Ga{sub i}-B during RTA. On the other hand, when the Ga{sub i}-A and Ga{sub i}-B are readily abundant (e.g., at higher growth temperatures ({>=}500 deg. C), RTA leads to a slight reduction of the Ga{sub i}-A and Ga{sub i}-B ODMR signals. The S2 defect is also shown to be thermally stable upon the RTA treatment.

36 MATERIALS SCIENCE↗

Temperature dependent and time-resolved photoluminescence studies of InAs self-assembled quantum dots with InGaAs strain reducing layer structure

Four types of self-assembled InAs/GaAs quantum dots (QDs) were grown by molecular beam epitaxy and studied via temperature-dependent and time-resolved photoluminescence (PL) spectroscopy measurements. A thin InGaAs stain reducing layer (SRL) is adopted which extends the emission wavelength to 1.3 mum and the influence of strain on QDs is investigated. The SRL releases the strain between the wetting layer and QDs, and enlarges the size of QDs, as shown by atomic force microscopy measurements. As the thickness of InAs layer decreases to 1.7 ML, the QDs with the SRL are chained to strings and the density of QDs increases significantly, which leads to an abnormal redshift of 1.3 mum PL peak at room temperature. PL peaks of InAs QDs with the SRL show redshift compared with the QDs directly deposited on GaAs matrix. The dependences of PL lifetime on the QD size, density and temperature (T) are systematically studied. It is observed that the PL lifetime of QDs is insensitive to T below 50 K. Beyond 50 K, increases and then drops at higher temperature, with a peak at T{sub C}, which was determined by the SRL and the thickness of InAs. We have also observed an obvious PL spectral redshift of the QDs with 1.7 ML InAs coverage on SRL at low T as the measuring time delays. The PL lifetime of QDs with the SRL is smaller than that of QDs without the SRL. The QDs with different densities have different PL lifetime dependence on the QDs size. These observations can be explained by the competition between the carrier redistribution and thermal emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗