Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High resolution data analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Invited: uPSP Launch Vehicle Demonstration Test at NASA Ames Research Center

The Unsteady Pressure-Sensitive Paint (uPSP) Development Team outof NASA Ames Research Center (ARC) has spent the past five yearsimproving the systems and processes to advance the uPSP technology for production-level wind tunnel testing. Already considered turnkey for small-scale and research applications, development in acquisition, calibration, data transfer, and data processing were needed to be useful to customers testing at NASA wind tunnels. This development focused at ARC at the Unitary Plan Wind Tunnel (UPWT) 11-by 11-ft Transonic Wind Tunnel due to the large optical access of the test section and the NASA Advanced Supercomputer(NAS), also located at ARC. A Launch Vehicle Demonstration Test (LVDT) at the UPWT represents a milestone of this initial phase of development where several new improvements were demonstrated in a production wind tunnel environment for the first time. LVDT was conducted in April 2024 and used a 4% forebody Space Launch System (SLS) Block 1B model as the test article. Both a crew and cargo configuration were tested, with varying Mach numbers, pressures, model positions, and camera magnifications. This paper summarizes the details of the test and is part of a collection with four additional papers that provide greater detail on: high-speed lifetime methodology, spectral proper orthogonal decomposition analysis, quality of high-resolution data compared to Corcos model, and data quality, calibration, and uncertainty.

SLS↗

Observations of quasi-periodic oscillations from GX 5 - 1 and Cygnus X-2 with the Einstein (HEAO 2) Observatory

The bright galactic bulge X-ray source GX 5 - 1 was observed in April 1979 with the Monitor Proportional Counter on board the Einstein (HEAO 2) Observatory. Analysis of the high time resolution data from the Time Interval Processor confirms the recent Exosat discovery of quasi-periodic oscillations in the X-ray emission from GX 5 - 1. In addition, the summed 0.4 s power spectrum shows the low-frequency red noise component also discovered in the Exosat data. Low-frequency structure is also clearly present in data taken from the bright galaxtic X-ray source Cyg X-2 in December 1978. The expected power spectrum for quasi-periodic oscillations was calculated, including the low-frequency red noise component, using a simple shot noise model with oscillating shots.

Elsner, R. F.↗

Analysis of spatial inhomogeneities in cumulus clouds using high spatial resolution Landsat data

Aircraft observations and high resolution Landsat MSS digital data are used to determine the sizes of spatial inhomogeneities ('holes') in cumulus clouds. The majority of holes are found near cloud edges, but the larger holes tend to be found in cloud interiors. Aircraft measurements show these cloud spatial inhomogeneities in the range of 100 to 500 m, while Landsat data show them in the range of 100 m to 3 km. The number of holes per cloud decreases exponentially with increasing hole diameter. Small clouds not only have smaller holes, but also fewer holes than large clouds. Large clouds have large holes in them, as well as large numbers of the smaller holes. The total cloud area occupied by holes increases with increasing cloud size.

Parker, Lindsay↗

Ozone precursors and ozone photochemistry over eastern North Pacific during the spring of 1984 based on the NASA GTE/CITE 1 airborne observations

Simultaneous high-resolution measurements of O3, NO, CO, dew point temperature, and UV flux obtained during the NASA Global Tropospheric Experiment Chemical Instrumentation Test and Evaluation (GTE/CITE 1) spring 1984 airborne field exercise over the eastern North Pacific Ocean are analyzed. Mid-tropospheric CO, O3, and NO mixing ratios averaged about 120 parts per billion by volume (ppbv), 50 ppbv, and 10 parts per trillion by volume (pptv), respectively. Statistical analysis of the high-resolution data indicates the existence of two ozone sources, one related to the downward transport of ozone-rich air from the upper troposphere and stratosphere, and the other to the transport of ozone-rich air from the continents. Modeling calculations based on these average levels imply that, from the surface to about 8 km, photochemical reactions probably supplied a net sink of ozone to the region overlying the eastern North Pacific Ocean during the sampling period. However, because the NO levels measured during the flights were frequently at or near the detection limit of the instruments and because the results are very sensitive to the absolute NO levels and their temporal variability, the conclusion must be considered provisional.

Chameides, W. L.↗

Analysis of cirrus optical properties with data from NASA ER2 High-resolution Interferometer Sounder (HIS)

The 8 to 13 micron spectral region is an important atmospheric window for radiometric studies of the Earth's surface and clouds. Most of the Earth-atmosphere longwave radiative loss to space occurs in this spectral region. Selective gaseous absorption in this window occurs in the 9.6 micron ozone band with the remaining absorption dominated by the water vapor continuum. Cirrus clouds have a large impact on the transmittance of this atmospheric window region; it is therefore important to understand the interaction of cirrus cloud with the radiation field for climate studies and in the interpretation of satellite radiometric measurements. The focus was to employ observations of the High-resolution Interferometer Sounder (HIS) made during First ISCCP Regional Experiment (FIRE) to improve the understanding of the radiative properties of cirrus clouds within this window region. Studies were undertaken to investigate the coupling between the microphysical properties of cirrus clouds and their spectral variation within this window region. Extensions of the HIS studies to satellite measurements, with regards to remote sensing and interpretation, were also investigated.

Smith, William L.↗

A High Resolution Survey of the Disk of M31

This report describes research activities funded for SAO Proposal P3481-5-95, "Monitoring the Center of M31". Related activities for SAO Proposal P3486- 5-95, "A High-Resolution Survey of the Disk of M31" are also described. The research involved the data analysis and interpretation of eleven separate ROSAT (Roentgen Satellite) HRI (High Resolution Imager) observations of the center and inner disk of M31, obtained between July, 1990 and January, 1997. A log of the individual data sets is given. All proposed observations were successfully carried out by the ROSAT Observatory, and standard data products were successfully generated for each observation. There were two basic thrusts to the research. First, we wished to monitor the x-ray source nearest the nucleus of M31, to search for anti-correlated radio/x-ray variability predicted by theoretical models for the source. We would also be able to assess the degree and range of variability of other x-ray sources in the central bulge of M31 and to estimate rates of transients. Secondly, we wished to survey the entire inner disk of M31, and in particular the region covered by the recent MIT wide-band and narrow-band surveys to identify x-ray counterparts to supernova remnants, OB associations, and young blue stars, in areas in which the ROSAT PSPC survey was confused. Results of each research project are summarized. Papers describing the results in more detail are in preparation.

Primini, Francis A.↗

Search for TeV gamma-ray emission from Hercules X-1

Six years of observations of Hercules X-1 with the Whipple Observatory gamma-ray telescope have been subjected to a Fourier analysis to search for emission at the 0.8079 Hz neutron star frequency. Evidence for a signal is found at the 99.5 percent confidence level for data taken with the medium-resolution imaging camera with some indications of emission at frequencies blueshifted from the fundamental frequency. However, analysis of the high-resolution camera data base have failed to substantiate this effect. Selection of events on the basis of gamma-ray-like image parameters did not enhance the signal from the medium-resolution data nor produce any indication of a signal from the high-resolution data. The overall conclusion is that no statistically significant evidence for TeV gamma-ray emission was found in the Whipple Observatory data base when the 6 years of data are taken as a whole.

Reynolds, P. T.↗

Interannual Variability of Ozone in the Polar Vortex during the Fall Season

Previous analysis has shown that the distribution of O3 at high northern latitudes in the lower-to-middle stratosphere at the beginning of the winter season has a characteristic distribution, which is consistent between in situ and satellite measurements. Initial O3 profiles in the vortex are similar to each other and are quite different from outside the vortex at the same latitude and also from a zonal mean climatology. In the vortex, O3 is nearly constant from 500 to above 800 K with a value near 3 ppmv. Values outside the vortex are up to a factor of 2 higher and increase significantly with potential temperature. Model analysis indicates that the characteristic vortex O3 profiles arise from a combination of seasonally accelerated photochemical loss at high latitudes and minimal transport of air from lower latitudes. Analysis of the relatively high-resolution POAM data shows that these characteristic O3 distributions are consistent from year to year and between the hemispheres. Here we emphasize analysis of the 24-year time series of O3 data from SBUV in the lower-to-middle stratosphere at high latitudes in the fall vortex. We find that the variability of O3 from SBUV is relatively small in this regime and no significant trend is detectable. The implications of the findings for stratospheric O3 chemistry and transport will be explored.

Bhartia, P. K.↗

Multielectrode electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

A multielectrode-based electrochemical cell allows the structural characterization of an amorphous thin-film water oxidation catalyst under various electrochemical potentials using high-energy X-ray scattering and atomic pair distribution function (PDF) techniques. A multielectrode with five electrodes provides a sufficiently low background signal to enable high-energy X-ray scattering (HEXS) measurements and amplifies the extremely low HEXS signals from samples for high-resolution PDF analysis of in situ data from thin-film catalysts. Glassy carbon (GC) creates a relatively low intensity HEXS pattern and is used as a working electrode. Instead of a three-dimensional (3D) porous electrode architecture, the flat geometry of the electrode enables various deposition techniques to be used for the preparation of a highly conductive metal oxide layer. PDF analysis demonstrates high spatial resolution for a 230 nm thick amorphous iridium oxide film deposited on two roughened 60 µm thick GC electrodes. The PDF analysis resolves the domain size and distinguishes changes in fine structure which are directly correlated with the structure and function of the catalysts. In conclusion, the results bring the opportunity to analyze the structure of nanometre-scale amorphous thin-film catalysts in an electrolyte-compatible and compact 3D-printed electrochemical cell in a three-electrode configuration.

36 MATERIALS SCIENCE↗

Rapid, High-Resolution Detection of Environmental Change over Continental Scales from Satellite Data - the Earth Observation Data Cube

The effort and cost required to convert satellite Earth Observation (EO) data into meaningful geophysical variables has prevented the systematic analysis of all available observations. To overcome these problems, we utilise an integrated High Performance Computing and Data environment to rapidly process, restructure and analyse the Australian Landsat data archive. In this approach, the EO data are assigned to a common grid framework that spans the full geospatial and temporal extent of the observations - the EO Data Cube. This approach is pixel-based and incorporates geometric and spectral calibration and quality assurance of each Earth surface reflectance measurement. We demonstrate the utility of the approach with rapid time-series mapping of surface water across the entire Australian continent using 27 years of continuous, 25 m resolution observations. Our preliminary analysis of the Landsat archive shows how the EO Data Cube can effectively liberate high-resolution EO data from their complex sensor-specific data structures and revolutionise our ability to measure environmental change.

Lewis, Adam↗

Detection of hidden mineral deposits by airborne spectral analysis of forest canopies

Data from field surveys and biogeochemical tests conducted in Maine, Montana, and Washington strongly correlate with results obtained using high resolution airborne spectroradiometer which detects an anomalous spectral waveform that appears definitely associated with sulfide mineralization. The spectral region most affected by mineral stress is between 550 nm and 750 nm. Spectral variations observed in the field occur on the wings of the red chlorophyll band centered at about 690 nm. The metal-stress-induced variations on the absorption band wing are most successfully resolved in the high spectral resolution field data using a waveform analysis technique. The development of chlorophyll pigments was retarded in greenhouse plants doped with copper and zinc in the laboratory. The lowered chlorophyll production resulted in changes on the wings of the chlorophyll bands of reflectance spectra of the plants. The airborne spectroradiometer system and waveform analysis remains the most sensitive technique for biogeochemical surveys.

Collins, W.↗

Evaluating the Grid Impact of Oregon Offshore Wind [Slides]

This analysis used high-resolution offshore wind data and a detailed production cost model (PCM) of the Western Interconnection to explore the value and operational impact of integrating offshore wind along Oregon's coastline. Leveraging local technical stakeholder expertise and input, we determined a set of scenarios to explore. These scenarios vary both offshore wind capacities and the Western Interconnection generation and transmission infrastructure. From the scenario modeling and analysis, we identified the following key findings. In addition, we simulated a subset of the scenarios for a range of historical weather years (2007-2013), to understand the robustness of our findings to different weather conditions. Trans-coastal transmission constraints and congestion are the key drivers to the curtailment of Oregon offshore wind. Once power can be delivered into the Willamette Valley, there are few system constraints that lead to a significant curtailment of offshore wind off the coast of Oregon. Approximately 2.6 GW of installed offshore wind capacity can be integrated into Oregon's power system without major upgrades to trans-coastal transmission while avoiding significant curtailment. The system value provided by offshore wind ranges between $\$65$ /MWh and $\$85$ /MWh across the various scenarios considered. Offshore wind heavily influences the flow of the cross Cascade transmission. Across all scenarios, we found a robust relationship of approximately 500-550 MW decrease in the hourly flow of the cross Cascade transmission for every 1,000 MW of hourly offshore wind generation. However, we also found there was not a strong relationship between the highest cross-Cascade transmission flow hours and high offshore wind generation, limiting the extent to which offshore wind can be considered a non-wires alternative to cross cascade transmission. Depending on the meteorological year, 880-1,580 MW and 1,650-3,100 MW can be counted on to serve coastal loads with 2.6 GW and 5 GW of offshore wind capacity, respectively. Offshore wind allows for more optimal daily and hourly scheduling of hydropower, while still complying with various technical and regulatory constraints on the water resource. Oregon offshore wind has the potential to contribute to the evening net load peak in California (i.e., mitigate duck curve challenges), however transmission congestion between California and Oregon limits this contribution. Co-located storage at the point of interconnection for offshore wind reduces curtailment when trans-coastal transmission is not upgraded, providing a non-wires alternative to increase offshore wind capacity beyond 2.6 GW.

17 WIND ENERGY↗

Forcing data (CESM2/CMIP6) for projection of drought impacts (2015-2100) at the K34 site in Manaus, Brazil

Historical and projected output data variables extracted and derived from Community Earth System Model 2 (CESM2) runs from the Coupled Model Intercomparison Project Phase 6 (CMIP6) archive. CESM2 is a fully coupled Earth system model used in simulations of Earth's past, present, and future climates (Danabasoglu et al., 2020). Variables in this dataset are in six-hourly resolution, and include air temperature (both in K and ℃), specific humidity (kg kg-1), air pressure (Pa), relative humidity (%), and vapor pressure deficit (kPa). CESM2 was the only CMIP6 model that provided VPD at the high temporal resolution required for this analysis. Data are included in .csv files, and the text file CESM2-CMIP6_forcing_K34-Manaus_headers.txt provides descriptions of data file headers.

54 ENVIRONMENTAL SCIENCES↗

Informed unsupervised machine learning analysis of dislocation microstructure from high-resolution differential aperture X-ray structural microscopy data

This study leverages high-resolution differential-aperture X-ray structural microscopy (DAXM) to probe the local dislocation structure in deformed 304L-stainless steel at small strain, by measuring the lattice rotation and deviatoric elastic strain with a sub-micron resolution. For a single grain in a polycrystalline specimen, the measured lattice rotation field over the measured volume exhibited a multimodal distribution while the deviatoric elastic strain showed a single-mode distribution. An unsupervised Cauchy mixture machine learning model was developed to resolve the multimodal distribution of the lattice rotation. By mapping the lattice rotation data associated with each Cauchy peak in the model back onto the measured volume, we identify contiguous regions of the crystal rotated near the average values corresponding to the peaks of the overall rotation distribution. These regions represent the grain subdivision in the microstructure. Finally, the dislocation density tensor was also computed and its norm was laid over the rotation field to detect the subgrain boundaries. This step provided a validation of the Cauchy mixture model for the analysis of the lattice rotation distribution. The current study highlights the integration of advanced X-ray microscopy techniques with data-driven analysis methods to uncover detailed microstructure scales in deformed crystals.

Machine learning; Lattice rotation; High-energy X-↗

Advances in geophysical forensic event monitoring

Forensic analysis of man-made, non-nuclear events (such as industrial accidents, explosion experiments and mine collapses) has become more frequent and detailed owing to advancements in geophysical monitoring. Here, in this Technical Review, we demonstrate how geophysical forensic monitoring using seismic, infrasound and hydroacoustic recordings provides insights on events in the solid earth, atmosphere and underwater. Advanced techniques, including machine-learning-based models, have been developed to detect, identify and investigate these events, providing information on location, subevents, sources and explosive yield. The increase in data availability, application of advanced methods and computation and the growth of multitechnology approaches have increased the accuracy of forensic event analysis and enabled more realistic characterization of uncertainties. For example, the 2020 Beirut explosion in Lebanon demonstrated that various seismic, acoustic and other methods could be used to estimate explosive yield (and yield uncertainties) of about 1 ktonne, providing confidence in the application of these methods to smaller events where data are available. However, forensic investigations remain largely limited to known events with identified sources. Increased access to data, sophisticated analysis methods and high-resolution earth models will improve forensic event analysis further, enabling civil and scientific applications, such as localization in the search for the lost ARA San Juan submarine.

geophysics↗

Unusual structure of the dayside low-latitude magnetopause energetic electron layer

An analysis of high time resolution energetic electron data from an ISEE 1 spacecraft crossing of the magnetopause on Nov. 6, 1977 is presented. Low-energy proton measurements were taken with an ultralow energy and charge analyzer and energetic electron measurements were made with an ultralow energy wide-angle telescope (ULEWAT). Electrons were observed in four rate channels between 75 and 1300 keV and particle angular distributions are provided. The ecliptic was scanned by the particle angular detector as the spacecraft rotated at 19.7 rpm. Trapped energetic electrons were found to drift from dusk to dawn by way of the midnight sector. The electrons which started at midnight met the magnetopause at the dawnside, were entrained on the field lines, and resulted in a filamentary small-scale structure. A diffusion time scale across the magnetosheath was determined to be a few seconds, and electrons diffused tailward or into the interplanetary medium

Scholer, M.↗

A geologic evaluation of thermal properties for the Elysium and Aeolis quadrangles of Mars

The results of an analysis of high-resolution thermal inertia data (obtained with the IR Thermal Mapper) for the Elysium and Aeolis quadrangles of Mars are presented. The results indicate that aeolian features, both with dark and light albedos relative to their surroundings, have thermal inertias higher than that of the surrounding terrains. On the other hand, terrains with distinctive surface relief do not have distinguishable thermal properties, even when these terrains can be spatially resolved from surrounding units. Thermal inertias for individual geologic units within the two quadrangles appear to be more strongly controlled by the location of the terrain in either the northern plains or the southern highlands than by properties intrinsic to the unit. The similarity of regional thermal properties observed at both high and low spatial resolutions indicates a regional homogeneity of much of the Martian surface at scales larger than 5 km.

Zimbelman, James R.↗