SEARCH · Engineering Papers

Results for “HIr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally-homogeneous surface-roughness treatment for rotor and stator elements

A combined analytical-computational method has been developed to calculate the transient pressure field and rotordynamic coefficients for high-pressure annular seals. The solution procedure applies to constant-clearance or the convergent tapered geometries of multistage centrifugal pumps which may have different surface roughness conditions on the stator and rotor seal elements. In experimental calculations with the method, the turbulent equations of Hirs (1973) are modified slightly to account for different surface roughness conditions, and a perturbation analysis is employed to develop zeroth and first order perturbation equations. Zeroth equations are also used to define both the leakage and circumferential flow due to shear stresses around the stator and rotor surfaces. The solution to analytical equations for four different surface roughnesses confirm the predicted net damping for the seals. A round-holed stator pattern yielded the highest net damping and lowest leakage of all the seals tested.

Childs, D. W.↗

NASA NTRS1984

Convergent-tapered annular seals - Analysis and testing for rotordynamic coefficients

A combined analytical-computational method has been developed to calculate the pressure field and dynamic coefficients for tapered high-pressure annular seals. Completely developed turbulent flow is assumed in both the circumferential and axial directions, according to Hirs' (1973) bulk-flow turbulent-lubrication equations. In a numerical experiment with the method, a short bearing approximation is used to derive an analytical expression for the first-order (dynamic) pressure gradient. This expression is integrated numerically to define dynamic coefficients of the seal. Numerical results of the integration are compared with previous results for straight and tapered seals. It is found that direct stiffness and leakage coefficients increase in the present seal, while the remaining coefficients decrease. An optimal taper angle is shown to exist with respect to: (1) the direct stiffness and (2) the ratio of direct stiffness to leakage. On the basis of the optimal taper angle calculations, stiffness increases on the order of 40 to 50 percent are predicted. Experimental results for three taper angles are presented, and are found to be in good agreement with the theoretical predictions.

Childs, D. W.↗

NASA NTRS1983

Water vapor profile retrievals from the HIRS/MSU sounder

The present physically based water vapor profile retrieval system for the HIRS/MSU sounding instrument is capable of producing accurate atmospheric and surface temperature retrievals, as well as accurate measurements of cloud fields on the basis of radiance values. In order to establish the extent of useful water vapor information in channels 8, 10, 11 and 12 of the HIRS instrument, studies have been conducted in which simultaneous temperature/humidity retrievals were performed on the basis of radiances simulated for clear and cloudy conditions.

Reuter, D.↗

NASA NTRS1985

Rotordynamic coefficients for compressible flow in tapered annular seals

Derivation of the governing equations for compressible flow in a tapered annular seal is based on Hirs' turbulent bulk-flow model. Zeroth and first-order perturbation equations are developed by an expansion in the eccentricity ratio. These equations are numerically integrated to obtain the leakage, and the direct and cross-coupled stiffness and damping coefficients. Seal parameters similar to the Space Shuttle Main Engine High Pressure Oxidizer Turbopump are used to demonstrate output from the analysis procedure. The effects of preswirl and seal taper are shown for three different length-to-diameter ratios. Generally the results indicate that prerotating the fluid significantly increases the cross-coupled stiffness but has little effect on the other coefficients, and increasing the convergent taper increases the direct stiffness while decreasing the direct damping and cross-coupled stiffness.

Nelson, C. C.↗

NASA NTRS1985

Advanced Moisture and Temperature Sounder (AMTS) study

Retrieval of tropospheric humidity profiles from satellite-based upwelling radiances are shown to be improved by using physical methods for obtaining first-guess profiles as well as for inverting the radiative transfer equation by relaxation. The first guess is based on an empirically verified hypothesis, from theoretical considerations, that the brightness temperature corresponding to the radiance should be approximately equal to the actual temperatue at a channel-invariant optical depth provided that the surface and stratospheric contributions to the radiance are small. Even greater improvement of retrieved humidity profiles can be accomplished by increasing the number of channels used and by selecting their spectral location and bandpass to obtain sharper independent weighting functions. For example, the AMTS system, with high resolution water channels at 1650, 1700, 1839, 1850 and 1930 cm, is shown to be capable of reducing the retrieved water vapor errors in 200 mb thick layers by a factor of two or three relative to the HIRS-2 system errors. Expected AMTS errors in tropical layer water content are particularly low, less than 20% at all levels, and of the order of 10% or less in the middle troposphere.

Kaplan, L. D.↗

NASA NTRS1985

Satellite-Derived Sea Surface Temperature: Workshop 3

This is the third of a series of three workshops, sponsored by the National Aeronautics and Space Administration, to investigate the state of the art in global sea surface temperature measurements from space. Three workshops were necessary to process and analyze sufficient data from which to draw conclusions on the accuracy and reliability of the satellite measurements. In this workshop, the final two (out of a total of four) months of satellite and in situ data chosen for study were processed and evaluated. Results from the AVHRR, HIRS, SMMR, and VAS sensors, in comparison with in situ data from ships, XBTs, and buoys, confirmed satellite rms accuracies in the 0.5 to 1.0 C range, but with variable biases. These accuracies may degrade under adverse conditions for specific sensors. A variety of color maps, plots, and statistical tables are provided for detailed study of the individual sensor SST measurements.

Source record↗

NASA NTRS1985

Simulation studies related to the design of post-FGGE observing systems

The results of three detailed simulation studies are presented. The first study consists of a comparative assessment of the performance of an advanced moisture/temperature sounder (AMTS) being proposed by NASA as a follow-on replacement to the current HIRS-2 operational sounder aboard the NOAA weather satellites. The second study was concerned with assessing the relative accuracies of inferred atmospheric states for idealized lidar wind profiling systems, temperature profiling systems, temperature profiling systems, surface pressure systems, and composite systems. The third study incorporated the above systems into a highly realistic data analysis/forecast cycle from which a series of forecast impact studies were conducted. These studies, taken together, give us a picture of the potential that emerging technoloies can offer in the determination of the basic atmospheric variables required for long-range numerical weather and climate prediction.

Halem, M.↗

NASA NTRS1985

Remote sensing of atmosphere-surface interaction parameters

Examples are given of the accuracy of the results obtained from the HIRS 2/MSU (High Resolution Infrared Sounder and Microwave Sounding Unit) analysis of ocean, atmosphere, and land parameters. Sea surface temperatures are compared with available ship and buoy radiosonde data, and land surface temperatures are compared with shelter temperatures. The seasonal change in land and ocean skin surface temperature is reviewed. The distribution of clouds is examined and their opacities in the visible and infrared parts of the spectrum are compared.

Chahine, M. T.↗

NASA NTRS1985

Production of global sea surface temperature fields for the Jet Propulsion Laboratory workshop comparisons

Sea surface temperature (SST) is measured from space by the advanced very high resolution radiometer (AVHRR), scanning multichannel microwave radiometer (SMMR), high resolution infrared sounder (HIRS) and VISSR atmospheric sounder (VAS). Typical accuracies have been reported from 0.5 C regionally to 2.0 C on a global basis. To evaluate the accuracy of the satellite-derived sea surface temperatures, a series of three workshops was organized to provide uniform data reduction and analysis. The analytical techniques used to intercompare satellite and in situ measurements are described in detail. Selected results showed the overall average rms errors were in the range 0.5-1.0 C.

Hilland, J. E.↗

NASA NTRS1987

Rotordynamic coefficients and leakage flow of parallel grooved seals and smooth seals

Based on Childs finite length solution for annular plain seals an extension of the bulk flow theory is derived to calculate the rotordynamic coefficients and the leakage flow of seals with parallel grooves in the stator. Hirs turbulent lubricant equations are modified to account for the different friction factors in circumferential and axial direction. Furthermore an average groove depth is introduced to consider the additional circumferential flow in the grooves. Theoretical and experimental results are compared for the smooth constant clearance seal and the corresponding seal with parallel grooves. Compared to the smooth seal the direct and cross-coupled stiffness coefficients as well as the direct damping coefficients are lower in the grooved seal configuration. Leakage is reduced by the grooving pattern.

Nordmann, R.↗

NASA NTRS1986

Intercomparison of independent estimates of cloud properties from simultaneous satellite observations

Preliminary results are reported from comparisons between two techniques for determining the cloud cover fraction within a satellite remote sensing scene. One method (PRM) quantifies cloud-free and cloud-filled areas on the bases of physical relationships between temperature, humidity, cloud optical properties and emitted radiation. The other approach (RSSM) derives the fractional cover from the spatial structure of radiances detected by the sensor. The HIRS (PRM) and the AVHRR (RSSM) instruments, tuned to IR wavelengths, on the TIROS-N polar-orbiting satellite furnished the trial data. Sample results are provided from scans at 15 and 11 microns over the Pacific Ocean.

Coakley, J. A., Jr.↗

NASA NTRS1986

The ill-posed nature of the satellite temperature retrieval problem and the limits of retrievability

The inverse problem of satellite temperature profile retrieval is well known to be ill-posed. This means that not only is a vertical temperature profile solution not unique, but that two solutions can be very different from each other. A set of atmosphere-like, and true atmospheric examples of significantly dissimilar inverse solutions, were sought and found, using an 11-channel simulated HIRS sounding radiometer. Using the Riemann-Lebesgue Lemma for guidance, it is shown that simultaneous, numerical solutions of an atmospheric character may differ by as much as 10 K between 10-1000 mb. However, an empirical search for dissimilar solutions in the natural atmosphere reveals an extremely low probability of finding two significantly different RAOBs which produce radiance measurements whose differences cannot be resolved by the satellite radiometer. The empirical results are used to derive a first estimate of the limits of retrievability, analogous to the limits of predictability derivable from the ill-posed nature of the numerical weather prediction problem.

Thompson, Owen E.↗

NASA NTRS1986

Cloud and moisture fields derived from the GLA retrievals of HIRS2/MSU data

The GLA retrieval scheme for the analysis of HIRS and MSU radiances is applied to derive cloud and humidity fields from the HIRS2/MSU data for June 1979. For the retrieval of cloud fraction and cloud top pressure, the original algorithm of Susskind et al. (1983) and Susskind et al. (1984) was improved. The derived profiles of the monthly mean fields of cloud fraction and cloud top pressure clearly show the intertropical convergence zone, with the most intense convection in the monsoonal region of the southern Asia and over Central America, which show up as containing the highest cloud top levels and largest cloud amount. For the retrieval of humidity profiles, which are not one of the products of the original processing system, a new algorithm was derived.

Reuter, D.↗

NASA NTRS1991

Fluid-structure interaction forces at pump-impeller-shroud surfaces for axial vibration analysis

The axial forces developed on a pump impeller shroud surfaces are analyzed using a bulk-flow model of the leakage path between the impeller and the housing. Shear stresses at the impeller and the housing surfaces are modeled according to Hirs's turbulent lubrication model. The calculated results yield predictions of resonance peaks of the fluid within the annulus formed by the impeller shroud and housing. Numerical results are presented for a double-suction single-stage pump, showing that the direct stiffness of the perturbed impeller shroud forces is negligible; the forces become important only for pumps with very low axial natural frequencies in comparison to the running speed.

Childs, D. W.↗

NASA NTRS1990

Cirrus cloud characteristics derived from volume imaging lidar, high spectral resolution lidar, HIS radiometer, and satellite

Preliminary measurement results are presented from the Cirrus Remote Sensing Pilot Experiment which used a unique suite of instruments to simultaneously retrieve cirrus cloud visible and IR optical properties, while addressing the disparities between satellite volume averages and local point measurements. The experiment employed a ground-based high resolution interferometer sounder (HIS) and a second Fourier transform spectrometer to measure the spectral radiance in the 4-20 micron band, a correlated high spectral resolution lidar, a volume imaging lidar, a CLASS radiosonde system, the Scripps Whole Sky Imager, and multispectral VAS, HIRS, and AVHRR satellite data from polar orbiting and geostationary satellites. Data acquired during the month long experiment included continuous daytime monitoring with the Whole Sky Imager.

Grund, Christian J.↗

NASA NTRS1991

Remote sensing cloud properties from combined AVHRR HIRS/2 and ERBE observations

The paper describes a method for determining cloud parameters from the combined remote sensing measurements of the NOAA AVHRR and the High-Resolution Infrared Radiometer Sounder (HIRS-2). The method was implemented on a set of observations primarily limited to the tropical eastern Pacific. Examples of applications of this data set are presented.

Ackerman, Steven A.↗

NASA NTRS1993

MAMS: High resolution atmospheric/surface properties

The Multispectral Atmospheric Mapping Sensor (MAMS) has been used for a number of investigations over the last 8 years. It has served as the basis for retrieval technique development, for atmospheric process studies, and to retrieve geophysical parameters at the surface (land and ocean). It was used most recently to collect high resolution visible and infrared imagery for the CaPE and STORMFEST experiments during FY91 and FY92. The Wildfire spectrometer (similar to MAMS but with different infrared channels) was also used during STORMFEST. The goals of MAMS during CaPE were: (1) to collect MAMS data to support the overall CaPE science objectives; (2) refine techniques for the retrieval of atmospheric moisture and surface geophysical parameters; (3) map the moisture distributions associated with the sea breeze front over Florida with MAMS ancillary satellite data on a case study basis; (4) identify surface features which may serve as local sources of heat and moisture and influence preferential convective regions over Florida, and (5) process MAMS data and derived relevant geophysical parameters to support other CaPE investigators. For STORMFEST both the MAMS and Wildfire spectrometers were used to collect unique multispectral data to study atmospheric processes. The Wildfire objectives were: (1) to collect high quality Wildfire data in conjunction with other in situ and remote measurements available during the STORMFEST field phase (1 February - 15 March 1992); (2) to develop algorithms to retrieve total ozone content and compare with those from TOMS and HIRS (IR); and (3) along with water vapor imagery, use the ozone data to better understand the 3-dimensional structure and dynamics of jet streaks and frontal systems in a case study investigation. The MAMS objectives were: (1) collect MAMS data to support a GSFC investigation of gravity waves; and (2) process the MAMS data to locate gravity wave features, and produce various moisture products in support of the gravity wave investigation. The research activities over the last year are presented and they focused on analyzing the CaPE data sets and collecting and starting preliminary analysis of the STORMFEST MAMS and Wildfire data.

Jedlovec, Gary J.↗

NASA NTRS1993

Investigation of cloud properties and atmospheric stability with MODIS

The work accomplished with the MAS (MODIS Airborne Simulator) during the TOGA-COARE (Tropical Ocean Global Atmosphere - Coupled Ocean Atmosphere Response Experiment) from January through June 1993 included cloud investigations with longwave CO2 channels (out to 13.9 microns) that reconfigured spectral channels. The comparison data was used with HIRS (high resolution Infrared Radiation Sounder) data from FIRE (First ISSCP Regional Experiment), CEPEX, and SCAR (Smoke Clouds, Aerosol and Radiation) data for the development of a two layer cloud CO2 slicing algorithm and the development of multi-spectral cloud detection algorithms (specifically tri-spectral) for cloud identification. Regarding the latter, a clustering analysis was added to improve cloud identification within the scatter diagram of tri-spectral (8, 11, and 12 microns) brightness temperatures. Via the regressions of the 8 - 11 and the 11 - 12 micron brightness temperature differences versus precipitable water, the problem of clear sky identification in the scatter diagram was further addressed. Comparison of the tri-spectral technique and visible channel reflectance ratioing indicate the tri-spectral infrared method distinguishes cloud phase more consistently in mixed cloud scenes rather than single phase cloud scenes where visible ratioing performs best.

Menzel, Paul↗