Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Enhancement of peptide bond formation by polyribonucleotides on clay surfaces in fluctuating environments

The selective effects of polyribonucleotides on the formation of glycine peptide bonds in glycine on clay surfaces are investigated as a model for a template mechanism for the effects of polynucleotides on peptide bond formation. Free oligoglycine yields were determined for the cycling reaction of glycine in the presence and absence of clay and polyribonucleotides or polydeoxyribonucleotides. The polyribonucleotides are observed to lead to increases of up to fourfold increases in oligoglycine formed, with greater enhancements for poly-G nucleotides than for poly-A, poly-U and poly-C, indicating a codonic bias. Polydeoxyribonucleotides are found to provide no enhancement in peptide formation rates, and yields were also greatly reduced in the absence of clay. A mechanism for peptide synthesis is proposed which involves the activation of glycine on the clay surface, followed by the formation of esters between glycine and the 2-prime OH groups of the polyribonucleotide and peptide bonds between adjacent amino acyl esters. It is pointed out that if this mechanism is correct, it may provide a basis for a direct template translation process, which would produce a singlet genetic code.

White, D. H.↗
NASA NTRS1980

Capacity of a direct detection optical communication channel

The capacity of a free space optical channel using a direct detection receiver is derived under both peak and average signal power constraints and without a signal bandwidth constraint. The addition of instantaneous noiseless feedback from the receiver to the transmitter does not increase the channel capacity. In the absence of received background noise, an optimally coded PPM system is shown to achieve capacity in the limit as signal bandwidth approaches infinity. In the case of large peak to average signal power ratios, an interleaved coding scheme with PPM modulation is shown to have a computational cutoff rate far greater than ordinary coding schemes.

Tan, H. H.↗
NASA NTRS1983

PREWATE: An interactive preprocessing computer code to the Weight Analysis of Turbine Engines (WATE) computer code

The Weight Analysis of Turbine Engines (WATE) computer code was developed by Boeing under contract to NASA Lewis. It was designed to function as an adjunct to the Navy/NASA Engine Program (NNEP). NNEP calculates the design and off-design thrust and sfc performance of User defined engine cycles. The thermodynamic parameters throughout the engine as generated by NNEP are then combined with input parameters defining the component characteristics in WATE to calculate the bare engine weight of this User defined engine. Preprocessor programs for NNEP were previously developed to simplify the task of creating input datasets. This report describes a similar preprocessor for the WATE code.

Fishbach, L. H.↗
NASA NTRS1985

Recent improvements in efficiency, accuracy, and convergence for implicit approximate factorization algorithms

In 1977 and 1978, general purpose centrally space differenced implicit finite difference codes in two and three dimensions have been introduced. These codes, now called ARC2D and ARC3D, can run either in inviscid or viscous mode for steady or unsteady flow. Since the introduction of the ARC2D and ARC3D codes, overall computational efficiency could be improved by making use of a number of algorithmic changes. These changes are related to the use of a spatially varying time step, the use of a sequence of mesh refinements to establish approximate solutions, implementation of various ways to reduce inversion work, improved numerical dissipation terms, and more implicit treatment of terms. The present investigation has the objective to describe the considered improvements and to quantify advantages and disadvantages. It is found that using established and simple procedures, a computer code can be maintained which is competitive with specialized codes.

Pulliam, T. H.↗
NASA NTRS1989

High rate concatenated coding systems using multidimensional bandwidth-efficient trellis inner codes

A concatenated coding system using two-dimensional trellis-coded MPSK inner codes and Reed-Solomon outer codes for application in high-speed satellite communication systems was proposed previously by the authors (1989). The authors extend their results to systems using symbol-oriented, multidimensional, trellis-coded MPSK inner codes. The concatenated coding systems are divided into two classes according to their achievable effective information rates. The first class uses multidimensional trellis-coded 8-PSK inner codes and achieves effective information rates around 1 b/dimension (spectral efficiency 2 b/s/Hz). The second class employs multidimensional trellis-coded 16-PSK inner codes and provides effective information rates around 1.5 b/dimension (spectral efficiency 3 b/s/Hz). Both classes provide significant coding gains over an uncoded reference system with the same effective information rate as the coded system. The results show that the symbol-oriented nature of multidimensional inner codes can provide an improvement of up to 1 dB in the overall performance of a concatenated coding system when these codes replace bit-oriented two-dimensional codes.

Deng, Robert H.↗
NASA NTRS1991

Group evaporation

Liquid fuel combustion process is greatly affected by the rate of droplet evaporation. The heat and mass exchanges between gas and liquid couple the dynamics of both phases in all aspects: mass, momentum, and energy. Correct prediction of the evaporation rate is therefore a key issue in engineering design of liquid combustion devices. Current analytical tools for characterizing the behavior of these devices are based on results from a single isolated droplet. Numerous experimental studies have challenged the applicability of these results in a dense spray. To account for the droplets' interaction in a dense spray, a number of theories have been developed in the past decade. Herein, two tasks are examined. One was to study how to implement the existing theoretical results, and the other was to explore the possibility of experimental verifications. The current theoretical results of group evaporation are given for a monodispersed cluster subject to adiabatic conditions. The time evolution of the fluid mechanic and thermodynamic behavior in this cluster is derived. The results given are not in the form of a subscale model for CFD codes.

Shen, Hayley H.↗
NASA NTRS1992

Ballistic limit regression analysis for Space Station Freedom meteoroid and space debris protection system

Relationships defining the ballistic limit of Space Station Freedom's (SSF) dual wall protection systems have been determined. These functions were regressed from empirical data found in Marshall Space Flight Center's (MSFC) Hypervelocity Impact Testing Summary (HITS) for the velocity range between three and seven kilometers per second. A stepwise linear least squares regression was used to determine the coefficients of several expressions that define a ballistic limit surface. Using statistical significance indicators and graphical comparisons to other limit curves, a final set of expressions is recommended for potential use in Probability of No Critical Flaw (PNCF) calculations for Space Station. The three equations listed below represent the mean curves for normal, 45 degree, and 65 degree obliquity ballistic limits, respectively, for a dual wall protection system consisting of a thin 6061-T6 aluminum bumper spaced 4.0 inches from a .125 inches thick 2219-T87 rear wall with multiple layer thermal insulation installed between the two walls. Normal obliquity is d(sub c) = 1.0514 v(exp 0.2983 t(sub 1)(exp 0.5228). Forty-five degree obliquity is d(sub c) = 0.8591 v(exp 0.0428) t(sub 1)(exp 0.2063). Sixty-five degree obliquity is d(sub c) = 0.2824 v(exp 0.1986) t(sub 1)(exp -0.3874). Plots of these curves are provided. A sensitivity study on the effects of using these new equations in the probability of no critical flaw analysis indicated a negligible increase in the performance of the dual wall protection system for SSF over the current baseline. The magnitude of the increase was 0.17 percent over 25 years on the MB-7 configuration run with the Bumper II program code.

Jolly, William H.↗
NASA NTRS1992

Previous model comparisons

The first model comparison workshop examined 14 mathematical models. Issues discussed included: transport methodologies; transport of nuclear test debris; transport algorithms; source gases; NO(y), Cl(x), HO(x), and O3; photolysis rates; diurnal averaging; and rainout. The second model comparison meeting examined 16 models. More real model-model intercomparisons were undertaken and several topics were addressed including: photochemistry and radiation; transport; current atmosphere 1980; and assessment runs. The models computed different values for photolysis rates even when O3 and O2 were fixed, thus more time should be spent at future model comparison meeting on radiation codes.

Jackman, Charles H.↗
NASA NTRS1992

HSR combustion analytical research

Increasing the pressure and temperature of the engines of a new generation of supersonic airliners increases the emissions of nitrogen oxides (NO(x)) to a level that would have an adverse impact on the Earth's protective ozone layer. In the process of evolving and implementing low emissions combustor technologies, NASA LeRC has pursued a combustion analysis code program to guide combustor design processes, to identify potential concepts of the greatest promise, and to optimize them at low cost, with short turnaround time. The computational analyses are evaluated at actual engine operating conditions. The approach is to upgrade and apply advanced computer programs for gas turbine applications. Efforts were made in further improving the code capabilities for modeling the physics and the numerical methods of solution. Then test cases and measurements from experiments are used for code validation.

Nguyen, H. Lee↗
NASA NTRS2007

Preliminary Assessment of Turbomachinery Codes

This report assesses different CFD codes developed and currently being used at Glenn Research Center to predict turbomachinery fluid flow and heat transfer behavior. This report will consider the following codes: APNASA, TURBO, GlennHT, H3D, and SWIFT. Each code will be described separately in the following section with their current modeling capabilities, level of validation, pre/post processing, and future development and validation requirements. This report addresses only previously published and validations of the codes. However, the codes have been further developed to extend the capabilities of the codes.

Mazumder, Quamrul H.↗
NASA NTRS1994

A comparison of cosmological hydrodynamic codes

We present a detailed comparison of the simulation results of various hydrodynamic codes. Starting with identical initial conditions based on the cold dark matter scenario for the growth of structure, with parameters h = 0.5 Omega = Omega(sub b) = 1, and sigma(sub 8) = 1, we integrate from redshift z = 20 to z = O to determine the physical state within a representative volume of size L(exp 3) where L = 64 h(exp -1) Mpc. Five indenpendent codes are compared: three of them Eulerian mesh-based and two variants of the smooth particle hydrodynamics 'SPH' Lagrangian approach. The Eulerian codes were run at N(exp 3) = (32(exp 3), 64(exp 3), 128(exp 3), and 256(exp 3)) cells, the SPH codes at N(exp 3) = 32(exp 3) and 64(exp 3) particles. Results were then rebinned to a 16(exp 3) grid with the exception that the rebinned data should converge, by all techniques, to a common and correct result as N approaches infinity. We find that global averages of various physical quantities do, as expected, tend to converge in the rebinned model, but that uncertainites in even primitive quantities such as (T), (rho(exp 2))(exp 1/2) persists at the 3%-17% level achieve comparable and satisfactory accuracy for comparable computer time in their treatment of the high-density, high-temeprature regions as measured in the rebinned data; the variance among the five codes (at highest resolution) for the mean temperature (as weighted by rho(exp 2) is only 4.5%. Examined at high resolution we suspect that the density resolution is better in the SPH codes and the thermal accuracy in low-density regions better in the Eulerian codes. In the low-density, low-temperature regions the SPH codes have poor accuracy due to statiscal effects, and the Jameson code gives the temperatures which are too high, due to overuse of artificial viscosity in these high Mach number regions. Overall the comparison allows us to better estimate errors; it points to ways of improving this current generation ofhydrodynamic codes and of suiting their use to problems which exploit their best individual features.

Kang, Hyesung↗
NASA NTRS1983

Early estimation of resource expenditures and program size

A substantial amount of software engineering research effort was focused on the development of software estimation models. A measure of lines of code was derived based on the origin of the delivered code, L sub dev = N + E + 0.2 (S + O) (where L sub dev = developed lines of code, N = newly implemented lines of code, E = extensively modified lines of code, S = slightly modified lines of code, and O = old unchanged lines of code) that is substituted in the following equation H sub s = aL sup b (where H sub s = staff-hours of effort, L = lines of code, a = a constant, and b = a constant). The limitations of this model are discussed and some alternative estimation models that can be used earlier in the development process are proposed.

Card, D.↗
NASA NTRS2016

Ray-Tracing Simulation and In-Orbit Performance of the ASTRO-H Hard X-Ray Telescope (HXT)

A ray-trace simulation code for the Hard X-ray Telescope (HXT) on board the Hitomi (ASTRO-H) satellite is beingdeveloped. The half power diameter and effective area simulated based on the code are consistent with groundmeasurements within 10%. The HXT observed the pulsar wind nebula G21.5-0.9 for 105 ksec. We confirmed that theencircled energy function and the half power diameter obtained from the data are consistent with the ground measurements.

Matsumoto, H.↗
NASA NTRS1988

Investigation of practical applications of H infinity control theory to the design of control systems for large space structures

The applicability of H infinity control theory to the problems of large space structures (LSS) control was investigated. A complete evaluation to any technique as a candidate for large space structure control involves analytical evaluation, algorithmic evaluation, evaluation via simulation studies, and experimental evaluation. The results of analytical and algorithmic evaluations are documented. The analytical evaluation involves the determination of the appropriateness of the underlying assumptions inherent in the H infinity theory, the determination of the capability of the H infinity theory to achieve the design goals likely to be imposed on an LSS control design, and the identification of any LSS specific simplifications or complications of the theory. The resuls of the analytical evaluation are presented in the form of a tutorial on the subject of H infinity control theory with the LSS control designer in mind. The algorthmic evaluation of H infinity for LSS control pertains to the identification of general, high level algorithms for effecting the application of H infinity to LSS control problems, the identification of specific, numerically reliable algorithms necessary for a computer implementation of the general algorithms, the recommendation of a flexible software system for implementing the H infinity design steps, and ultimately the actual development of the necessary computer codes. Finally, the state of the art in H infinity applications is summarized with a brief outline of the most promising areas of current research.

Irwin, R. Dennis↗
NASA NTRS1993

Development of an hp-version finite element method for computational optimal control

The purpose of this research effort is to develop a means to use, and to ultimately implement, hp-version finite elements in the numerical solution of optimal control problems. The hybrid MACSYMA/FORTRAN code GENCODE was developed which utilized h-version finite elements to successfully approximate solutions to a wide class of optimal control problems. In that code the means for improvement of the solution was the refinement of the time-discretization mesh. With the extension to hp-version finite elements, the degrees of freedom include both nodal values and extra interior values associated with the unknown states, co-states, and controls, the number of which depends on the order of the shape functions in each element.

Hodges, Dewey H.↗
NASA NTRS1999

Planetary Nebulae with Supporting IR Data

We present new HST/WFPC2 imagery for the planetary nebula (PN) NGC 6818. Observations were made in line filters F437N, F487N, F502N, and F656N plus continuum filter F547M. The primary goal was to develop a high spatial resolution (approx. 0.1 in.) map of the intrinsic line ratio [O III] 4363/5007 and thereby evaluate the electron temperature (T(sub e)) and the mean-square T(sub e) variation (t(sup 2) across the PN. In this process we developed an extinction map from the F487N (H(beta)) and F656N (H(alpha)) images by comparing the observed line ratios in each pixel to the theoretical ratio and computing a c(H(beta)) map which was used to correct the observed 4363/5007 ratios for reddening. We also adjust for the continuum contribution to the line filter data. We present color-coded pictures of the reddening (c(H(beta))) map, the [O III] T(sub e) map, as well as our determinations of t(sup 2). The T(sub e) map shows a decline from approx. 14000 K in the inner regions to approx. 11000 K at the outer edge. Such a radial T(sub e) gradient is expected for a high-excitation nebula with a prominent He(++) zone such as NGC 6818. A composite of images taken in 3 filters (F656N, red; F487N, blue; and F502N, [O III] 5007, green) shows a roughly spherical outer envelope as well as a brighter vase-shaped interior "bubble". There is a prominent orifice to the North and a smaller one to the South, along the major axis, possibly caused by a blow-out from a fast wind. This nebula has an appearance remarkably similar to that of the PN NGC 3918 previously imaged with HST by H. Bond. We note from the continuum images (F547M) two stars in the nebular field that are fainter than the prominent central star; these are roughly 2-4 sec. N and NE of the central star. Further study is needed to establish whether or not there may be a physical association of either star with the central star.

Harrington, J. Patrick↗