Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gypsum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Roles of Oil–Water Interfaces in Forming Ultrasmall CaSO 4 Nanoparticles

In natural and engineered environmental systems, calcium sulfate (CaSO 4 ) nucleation commonly occurs at dynamic liquid–liquid interfaces. Although CaSO 4 is one of the most common minerals in oil spills and oil–water separation, the mechanisms driving its nucleation at these liquid–liquid interfaces remain poorly understood. Here, in this study, using in situ small-angle X-ray scattering (SAXS), we examined CaSO 4 nucleation at oil–water interfaces and found that within 60 minutes of reaction, short rod-shaped nanoparticles (with a radius of gyration (R g ) of 17.2 ± 2.7 nm and a length of 38.2 ± 5.8 nm) had formed preferentially at the interfaces. Wide-angle X-ray scattering (WAXS) analysis identified these nanoparticles as gypsum (CaSO 4 ·2H 2 O). In addition, spherial nanoparticles measuring 4.1 nm in diameter were observed at oil–water interfaces, where surface-enhanced Raman spectroscopy (SERS) revealed an elevated pH compared to the bulk solution. The negatively charged oil–water interfaces preferentially adsorb calcium ions, collectively promoting CaSO 4 formation there. CaSO 4 particle formation at the oil–water interface follows a nonclassical nucleation (N-CNT) pathway by forming ultrasmall amorphous spherical particles which then aggregate to form intermediate nanoparticles, subsequently growing into nanorod-shaped gypsum. These findings of this study provide insights into mineral scaling during membrane separation and can inform more efficient oil transport in energy recovery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Membrane-based solvent extraction for the recovery of rare earths from phosphate mining process streams

This study reports on the capture of rare earth elements (REEs) from phosphate industry process streams, including phosphoric acid (PA) sludge and phosphogypsum (PG), using a membrane solvent extraction (MSX) process. While MSX has been proven effective for a relatively concentrated feed, its effectiveness for dilute REEs solutions remains unexplored. Investigated PA-sludge and PG particles contain total REEs concentrations of ∼1100 and ∼320 ppm, respectively. Acid leaching, implemented to dissolve the REEs, significantly dilutes the REEs concentration to ∼210 ppm for PA-sludge leachate and ∼60 ppm for PG leachate. These low concentrations, compounded by the higher levels of non-REE ions and radioactive species, uranium (U) and thorium (Th), poses challenges to the MSX process. Here, we demonstrated that N,N,N′,N′-tetraoctyl-diglycolamide (TODGA) selectively binds REEs from a >3 M nitric-acid leachate while effectively rejecting U and Th. Concentrations of light REEs in strip solution were doubled compared to the feed, while heavy REEs were preferentially extracted. Furthermore, >99% purity gypsum, free of U and Th, was precipitated during the acid leaching process, aiding separation by removing significant amounts of non-REEs species (e.g., calcium) prior to the MSX process. Molecular simulations support the experimental data, suggesting preferential separation of heavy over light REEs. Based on these results, a cost-effective integrated process including pretreatment, acid leaching, MSX, and wastewater treatment is proposed for the co-recovery of REEs, phosphoric acid, gypsum, and U. This study shows MSX as a technically and economically feasible process for the recovery of REEs from low-concentration process streams, offering advantages over conventional solvent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mineral Recovery Enhanced Desalination (MRED) process: An innovative technology for desalinating hard brackish water

Desalination of water containing high concentrations of calcium, dissolved carbon dioxide, sulfate, silica and other sparingly soluble salts is difficult because of the scaling potential. An innovative pre-treatment scheme was investigated at bench scale that selectively removes these constituents and produces a soft water to enable desalination with high feed water recovery. The process first removes dissolved carbon dioxide by air stripping at low pH. Magnesium is removed by precipitation at high pH. Calcium is removed by ion exchange (IX), and sulfate is removed by nanofiltration (NF). Cation regenerant from IX, containing calcium, and concentrate from NF, containing sulfate, is combined to precipitate gypsum. Concentrate from the desalination process consisting of a concentrated NaCl solution is used to regenerate the IX resins. The selective precipitation, IX, and NF processes were tested in laboratory experiments and produced magnesium hydroxide and gypsum at greater than 90% and 95% purity respectively. A process model was developed to calculate process performance, mass and liquid flow rates. Finally, the MRED process offers the following benefits: 1) greater recovery of brackish feedwater by a desalination process, 2) recovery of marketable commodities and 3) reduction in the volume and mass of waste products from the treatment process.

42 ENGINEERING↗
DOE OSTI2026

Cradle-to-gate life cycle assessment of advanced composite panels incorporating CO 2 -derived multi-walled carbon nanotubes and hemp fiber for sustainable building applications

Advanced composite panels represent a promising pathway to reducing carbon emissions in the construction industry, yet comprehensive environmental impact assessments remain limited. Here, in this study, we conduct a life cycle assessment (LCA) to evaluate the environmental impacts of innovative composite panels produced from multi-walled carbon nanotubes (MWCNTs), hemp fiber (HF), recycled carbon fiber (rCF), and recycled polypropylene (PP), exploring their potential as baseline structural equivalents to conventional gypsum board. MWCNTs and HF play a critical role in sequestering carbon during raw material production, while the recycling processes for CF and PP generally require less energy compared to virgin material production. The LCA evaluates environmental performance using the TRACI 2.1 method, covering global warming potential (GWP), ozone depletion, smog formation, acidification, eutrophication, carcinogenic and non-carcinogenic effects, respiratory impacts, ecotoxicity, and fossil fuel depletion. Compositional variations—resin type (virgin vs. recycled), rCF content (9–29 wt%), and HF content (10–30 wt%)—are introduced for sensitivity and hotspot analyses. Results demonstrate that, when compared on the basis of preliminary structural equivalence, increasing recycled PP, rCF, and HF content can significantly reduce global warming potential compared to gypsum board. Beyond carbon reduction, the composite panels show trade-offs across other environmental categories. With the growing demand for composite materials in interior panels, ceiling systems, and exterior claddings, these findings highlight the environmental benefits and potential trade-offs of the proposed composites, establishing a foundational framework to support their continued development toward full building-system integration.

Advanced composite manufacturing↗
DOE OSTI2022

Iron acquisition and mineral transformation by cyanobacteria living in extreme environments

Iron is an essential micronutrient for most living organisms, including cyanobacteria. These microorganisms have been found in Earth's driest polar and non-polar deserts, including the Atacama Desert, Chile. Iron-containing minerals were identified in colonized rock substrates from the Atacama Desert, however, the interactions between microorganisms and iron minerals remain unclear. In the current study, we determined that colonized gypsum rocks collected from the Atacama Desert contained both magnetite and hematite phases. A cyanobacteria isolate was cultured on substrates consisting of gypsum with embedded magnetite nanoparticles. Transmission electron microscopy imaging revealed a significant reduction in the size of magnetite nanoparticles due to their dissolution, which occurred around the microbial biofilms. Concurrently, hematite was detected, likely from the oxidation of the magnetite nanoparticles. Higher cell counts and production of siderophores were observed in cultures with magnetite nanoparticles suggesting that cyanobacteria were actively acquiring iron from the magnetite nanoparticles. Magnetite dissolution and iron acquisition by the cyanobacteria was further confirmed using large bulk magnetite crystals, uncovering a survival strategy of cyanobacteria in these extreme environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Mechanistic understanding of carbon mineralization in fracture systems using microfluidics

Carbon mineralization in mafic and ultramafic rocks presents an opportunity for permanent carbon storage in the Earth's subsurface. However, due to their lower permeability, pre-existing fracture networks are key for mineralization to occur. Therefore, to fully develop this technology, a mechanistic understanding of the mineralization behavior in fractures with the consideration of hydrodynamic components is required. We use high-pressure microfluidics to investigate key mechanisms influencing dissolution–precipitation in a fracture network. The experiments were conducted in micromodels made of natural rocks with a comb-shaped flow channel to mimic a fracture network. This enabled studying the effect of injection rate on coupled dissolution–precipitation in advection and diffusion-dominated flow paths. We used gypsum carbonation as an analog reaction to allow for realistic experimental time frames due to its rapid reaction kinetics. The experimental work is coupled with high-fidelity numerical simulations to enhance our understanding of the parameters affecting the mineralization reaction. Our results demonstrate the importance of flow rate on the rate and nature of the gypsum carbonation reaction revealing that higher flow rates enable deeper penetration of the mineral precipitation front into the dead-end channels. This is an important finding since for sustained mineralization in a fracture network, precipitation in dead-ends while still allowing for flowing fractures is critical. Detailed characterization of the precipitates showed that lower flow rates led to porous and loose precipitates in the form of aragonite while higher flow rates mimicked supersaturation behavior leading to the formation of calcite. The reactive transport simulations further demonstrated the significance of flow velocity in advection-dominated channels to influence the efficiency of carbon mineralization in diffusion-dominated channels, potentially clogging of dead-end channels. These findings highlight the need for coupling chemical, mechanical, and hydrodynamic processes to evaluate the nature and extent of carbon mineralization in fractured media critical for permanent storage in mafic and ultramafic formations. This research further highlights the need for more investigation in potential subsurface fracture generation techniques to aid carbon mineralization.

25 ENERGY STORAGE↗
DOE OSTI2024

Strategies for Developing High-Volume Fly Ash Concrete with High Early-Age Strength for Precast Applications

Partial replacement of portland cement with supplementary cementitious materials (SCMs), such as fly ash, is an effective strategy for improving durability and reducing the CO 2 footprint of concrete. However, using high-volume fly ash (HVFA) binders in precast and prestressed concrete is currently limited; largely due to reduced early-age strength development that impedes rapid production and prestressing of precast concrete. To investigate and address this challenge, HVFA mortars with a minimum of 40% fly ash by mass of cementitious materials were developed and tested in this study. Two fresh fly ashes (an ASTM C618 Class F and a Class C) and a landfilled fly ash (Class F) were included. Various strategies for improving the early strength were evaluated, including gypsum optimization, chemical accelerators, steam curing, use of CSA cements, and adding other reactive SCMs like silica fume, calcined clay, and slag cement. Steam curing and the use of CSA cement at high dosages (40% of total binder) were found to be the most successful strategies across all three fly ashes. Additionally, significant improvements were observed with gypsum optimization (for Class C fly ash) and the use of accelerators (for Class F fly ashes), and these strategies are likely to be more feasible considering later-age strength and economic viability. Interestingly, HVFA mixtures made with the landfilled fly ash used in this study were able to achieve high early strengths with water-to-cementitious materials ratio adjustment alone. As a result, these HVFA mixtures were also found to be less responsive to accelerators when compared to the fresh Class F fly ash, highlighting an important distinction between the materials despite the similarity in chemical composition.

42 ENGINEERING↗
DOE OSTI2023

A novel in-situ Raman spectroscopic cell for aqueous geochemistry at the solid–liquid interface

In-situ Raman spectroscopy has the potential to be a powerful technique for monitoring geochemical reactions at a solid–liquid interface in real time. In this article, we present the development and testing of an in-situ Raman spectroscopic cell, which can be used for reaction systems at moderate temperatures and pressure [<1000 psi (6.89 MPa), <100 °C, relevant to subsurface geologic systems] and can hold samples large enough for chemical mapping of heterogeneous rock surfaces. The system is validated by measuring the temperature-dependent conversion of gypsum to calcite over time. Near total conversion of gypsum to calcite on the mineral surface took 29 hours at room temperature and 150 minutes at 100 °C, corresponding to an 11.6-fold increase in the conversion rate. Further, we anticipate that this cell can be an important tool in quantifying the rates of carbon mineralization relevant to geologic carbon sequestration, particularly for the elevated rates recently observed in mafic/ultramafic rocks.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Hybrid Solar System (Final Scientific/Technical Report)

GTI Energy (GTI) teamed with the University of California at Merced (UCM) to scaleup the hybrid solar system (HSS) technology for demonstrating its performance at the US Gypsum (USG) plant in Plaster City, California. The technology integrates two-stage concentrating solar collector with matching particle thermal transport and storage (TSS) system to deliver cost-effective, and on-demand distributed high temperature industrial process heat up to 600°C with solar thermal, in this case to a gypsum kettle, to reduce its fuel use and carbon footprint. Current solar technologies, which reach these temperatures, are not distributable (towers) or cost-effective (dish). The research team developed a conceptual system design for host site retrofit, including preliminary heat balance, process flow diagram, particle to process heat exchanger and equipment placements at the site. Subsequently, parallel efforts were carried out at UCM to design, build and test a 12 m long commercial scale prototype concentrating thermal-only collector system and at GTI to design, build and test a matching 650°C capable particle TTS system. The nominal 50 kWth collector consists of a parabolic trough and three 4 m long two-stage receivers in series. Prior to on-sun testing, a 4 m long receiver was fabricated and successfully tested at 650 °C in a laboratory setting for 100 hrs of continuous operation showing less than 15% radiation loss. A 7 m wide x 17 m long parabolic trough was then installed at UCM for on-sun testing of the 12 m long receiver, and concurrently several 4 m long receivers were built. The optics of the parabolic trough were calibrated, and on-sun test were carried out on 12 m long receivers. During tests, the intense solar radiation (53x) caused the absorber tubes in the receivers to bend, reducing the overall optical efficiency. To address the bending issue, a self-consistent algorithm that includes ray tracing, thermal and deformation models was developed to perform thermal stress analysis on absorbers for parabolic solar collectors. Results obtained with this algorithm showed a dramatic rise in deformation as absorber tube length increases. A combined efficiency parameter that includes the occluded area for the mounts was developed to obtain an optimized tube length obtained. Based on the results, a length of 2.7 m for the absorber + 0.2 m for the coupler was chosen to minimize any bending and optimize optical efficiency while maintaining ease of mounting. The associated particle TTS system was designed, built and successfully tested at GTI. It includes storage, receiving and lock hoppers and piping that simulates the transfer of captured solar energy to an actual industrial furnace. Tests over 77 charge-discharge cycles demonstrated <2% particle degradation, with no problematic particle accumulations and no flow interruptions. The piping pressure drop was about 5 psi. The team also worked with Stanley Consultants (Stanley) to prepare conceptual and preliminary engineering packages to facilitate follow-on development and commercialization efforts. These include process and instrumentation diagram’s (P&ID’s), general arrangements, electrical one-line, project definitions document, equipment data sheets, schedule, and construction cost estimate for 2 MWth system. Updated HSS technology commercialization and customer engagement plans and detailed costs and evaluated market trade-offs and manufacturing.

03 NATURAL GAS↗
NASA NTRS1983

Heterogeneous shock-induced thermal radiation in minerals

A 500-channel optical imaging intensifying and spectral digital recording system is used for recording the shock-induced radiation emitted from 406 to 821 nm from transparent minerals during the time interval that a shock wave propagates through the sample. The initial results obtained for single crystals of gypsum, calcite and halite in the 30 to 40 GPa (300 to 400 kbar) pressure range reveal grey-body emission spectra corresponding to temperatures in the 3000 to 4000 K range and emissivities ranging from 0.003 to 0.02. With gypsum and calcite, distinctive line spectra are superimposed on the thermal radiation. The observed color temperatures are greater than the Hugoniot temperature by a factor of 2 to 10; this is calculable on the basis of continuum thermodynamics and equation of state models for the shock states achieved in the three minerals. These observed high temperatures are thought to be real. It is concluded that a large number of closed spaced high temperature shear-band regions are being detected immediately behind the shock front.

Kondo, K.-I.↗
NASA NTRS1983

An exploitation of coregistered SIR-A, Seasat and Landsat images

Multispectral registration and classification of SIR-A, Seasat SAR, and Landsat MSS data is presented over two playas located in the northeastern Algerian Sahara. A supervised classification was made over six classes: salt, palm trees, dunes, limestones, gypsum and sand. The best classification is obtained by using all of the data. The images using radar only misclassify trees and salt, limestone and dunes, gypsum and dunes. Landsat only gives a good map but lacks the roughness information contained in the radar data. The Landsat/SIR-A combination gives a better classification than the Landsat/Seasat combination. Density number histograms computed within several classes on the Seasat and SIR-A data show the misclassification is mainly due to the Seasat data.

Rebillard, P.↗
NASA NTRS1990

Bidirectional measurements of surface reflectance for view angle corrections of oblique imagery

An apparatus for acquiring bidirectional reflectance-factor data was constructed and used over four surface types. Data sets were obtained over a headed wheat canopy, bare soil having several different roughness conditions, playa (dry lake bed), and gypsum sand. Results are presented in terms of relative bidirectional reflectance factors (BRFs) as a function of view angle at a number of solar zenith angles, nadir BRFs as a function of solar zenith angles, and, for wheat, vegetation indices as related to view and solar zenith angles. The wheat canopy exhibited the largest BRF changes with view angle. BRFs for the red and the NIR bands measured over wheat did not have the same relationship with view angle. NIR/Red ratios calculated from nadir BRFs changed by nearly a factor of 2 when the solar zenith angle changed from 20 to 50 degs. BRF versus view angle relationships were similar for soils having smooth and intermediate rough surfaces but were considerably different for the roughest surface. Nadir BRF versus solar-zenith angle relationships were distinctly different for the three soil roughness levels. Of the various surfaces, BRFs for gypsum sand changed the least with view angle (10 percent at 30 degs).

Jackson, R. D.↗
NASA NTRS2001

Potential Evaporite Biomarkers from the Dead Sea

The Dead Sea is located on the northern branch of the African-Levant Rift systems. The rift system, according to one model, was formed by a series of strike slip faults, initially forming approximately two million years ago. The Dead Sea is an evaporite basin that receives freshwater from springs and from the Jordan River. The Dead Sea is different from other evaporite basins, such as the Great Salt Lake, in that it possesses high concentrations of magnesium and has an average pH of 6.1. The dominant cation in the Great Salt Lake is sodium, and the pH is 7.7. Calcium concentrations are also higher in the Dead Sea than in the Great Salt Lake. Both basins are similar in that the dominant anion is chlorine and the salinity levels are approximately 20 %. Other common cations that have been identified from the waters of the Dead Sea and the Great Salt Lake include sodium and potassium. A variety of Archea, Bacteria, and a single genus of a green algal, Dunaliella, has been described from the Dead Sea. Earlier studies concentrated on microbial identification and analysis of their unique physiology that allows them to survive in this type of extreme environment. Potential microbial fossilization processes, microbial fossils, and the metallic ions associated with fossilization have not been studied thoroughly. The present study is restricted to identifying probable microbial morphologies and associated metallic ions. XRD (X Ray Diffraction) analysis indicates the presence of halite, quartz, and orthoclase feldspar. In addition to these minerals, other workers have reported potassium chloride, magnesium bromide, magnesium chloride, calcium chloride, and calcium sulfate. Halite, calcium sulfate, and orthoclase were examined in this report for the presence of microbes, microbially induced deposits or microbial alteration. Neither the gypsum nor the orthoclase surfaces possesses any obvious indications of microbial life or fossilization. The sand-sized orthoclase particles are weathered with 122 extensive fan-shaped mineral deposits. The gypsum deposits are associated with halite minerals and also exhibit extensive weathering. Halite minerals represent the only substrates that have probable rod-shaped microbial structures with long, filamentous, apical extensions. EDS (energy dispersive x-ray) analysis of the putative microbes indicates elevated calcium levels that are enriched with magnesium. The rod-shaped structures exhibit possible fossilization stages. Rhombohedralshaped minerals of magnesium-enriched calcium carbonate are deposited on the microbial surfaces, and eventually coat the entire microbial surface. The sodium chloride continues to crystallize on nearby halite surface and even crystallizes on the fossilized microbial remains. The putative fossils are found exclusively on halite surfaces, and all contained elevated levels of calcium magnesium cations. Both of these metallic cations are associated with microbial activity and fossilization. Their morphological diversity is low in comparison with the reported living Dead Sea microbial population. If we examine the fossil record for multicellular organisms, fossilization rates are lower for soft-bodied organisms than for those possessing hard parts, i.e. shells, bones. For example, smaller, single celled organisms would have a smaller chance of fossilization; their fossilized shapes could be mistaken for abiotic products. Another consideration is that dead organisms in the water column are probably utilized as a food source by other microbes before fossilization processes are completed. This may be an important consideration as we attempt to model and interpret ancient microbial environments either on Earth or on Mars.

Morris, Penny A.↗
NASA NTRS1989

Ecology and life history of an amoebomastigote, Paratetramitus jugosus, from a microbial mat: new evidence for multiple fission

Five microbial habitats (gypsum crust, gypsum photosynthetic community, Microcoleus mat, Thiocapsa scum, and black mud) were sampled for the presence of the euryhaline, rapidly growing amoebomastigote, Paratetramitus jugosus. Field investigations of microbial mats from Baja California Norte, Mexico, and Salina Bido near Matanzas, Cuba, reveal that P. jugosus is most frequently found in the Thiocapsa layer of microbial mats. Various stages of the life history were studied using phase-contrast, differential-interference, and transmission electron microscopy. Mastigote stages were induced and studied by electron microscopy; mastigotes that actively feed on bacteria bear two or more undulipodia. A three-dimensional drawing of the kinetid ("basal apparatus") based on electron micrographs is presented. Although promitoses were occasionally observed, it is unlikely that they can account for the rapid growth of P. jugosus populations on culture media. Dense, refractile, spherical, and irregular-shaped bodies were seen at all times in all cultures along with small mononucleate (approximately 2-7 micrometers diameter) amoebae. Cytochemical studies employing two different fluorescent stains for DNA (DAPI, mithramycin) verified the presence of DNA in these small bodies. Chromatin-like material seen in electron micrographs within the cytoplasm and blebbing off nuclei were interpreted to the chromatin bodies. Our interpretation, consistent with the data but not proven, is that propagation by multiple fission of released chromatin bodies that become small amoebae may occur in Paratetramitus jugosus. These observations are consistent with descriptions of amoeba propagules in the early literature (Hogue, 1914).

Non-NASA Center↗
NASA NTRS1993

New constraints on Precambrian ocean composition

The Precambrian record of carbonate and evaporite sedimentation is equivocal. In contrast to most previous interpretations, it is possible that Archean, Paleoproterozoic, and to a lesser extent, Meso to Neoproterozoic seawater favored surplus abiotic carbonate precipitation, as aragonite and (hi-Mg?) calcite, in comparison to younger times. Furthermore, gypsum/anhydrite may have been only rarely precipitated prior to halite precipitation during evaporation prior to about 1.8 Ga. Two effects may have contributed to these relationships. First, sulfate concentration of seawater may have been critically low prior to about 1.9 Ga so the product mCa++ x mSO4-- would not have produced gypsum before halite, as in the Mesoproterozoic to modern ocean. Second, the bicarbonate to calcium ratio was sufficiently high so that during progressive evaporation of seawater, calcium would have been exhausted before the gypsum field was reached. The pH of the Archean and Paleoproterozoic ocean need not have been significantly different from the modern value of 8.1, even at CO2 partial pressures of a tenth of an atmosphere. Higher CO2 partial pressures require somewhat lower pH values.

NASA Discipline Exobiology↗
NASA NTRS2007

Aqueous Alteration on Mars

Aqueous alteration is the change in composition of a rock, produced in response to interactions with H2O-bearing ices, liquids, and vapors by chemical weathering. A variety of mineralogical and geochemical indicators for aqueous alteration on Mars have been identified by a combination of surface and orbital robotic missions, telescopic observations, characterization of Martian meteorites, and laboratory and terrestrial analog studies. Mineralogical indicators for aqueous alteration include goethite (lander), jarosite (lander), kieserite (orbiter), gypsum (orbiter) and other Fe-, Mg-, and Ca-sulfates (landers), halides (meteorites, lander), phyllosilicates (orbiter, meteorites), hematite and nanophase iron oxides (telescopic, orbiter, lander), and Fe-, Mg-, and Ca-carbonates (meteorites). Geochemical indicators (landers only) for aqueous alteration include Mg-, Ca-, and Fe-sulfates, halides, and secondary aluminosilicates such as smectite. Based upon these indicators, several styles of aqueous alteration have been suggested on Mars. Acid-sulfate weathering (e.g., formation of jarosite, gypsum, hematite, and goethite), may occur during (1) the oxidative weathering of ultramafic igneous rocks containing sulfides, (2) sulfuric acid weathering of basaltic materials, and (3) acid fog (i.e., vapors rich in H2SO4) weathering of basaltic or basaltic-derived materials. Near-neutral or alkaline alteration occurs when solutions with pH near or above 7 move through basaltic materials and form phases such as phyllosilicates and carbonates. Very low water:rock ratios appear to have been prominent at most of the sites visited by landed missions because there is very little alteration (leaching) of the original basaltic composition (i.e., the alteration is isochemical or in a closed hydrologic system). Most of the aqueous alteration appears to have occurred early in the history of the planet (3 to 4.5 billion years ago); however, minor aqueous alteration may be occurring at the surface even today (e.g., in thin films of water or by acid fog).

Ming, Douglas W.↗
NASA NTRS2015

Gusev-Meridiani-Type Soil Component Dissolved in Some Shock Glasses in Shergottites

Modal analysis, based on APXS, MiniTES and Mossbauer results obtained at Gusev and Meridiani sites on Mars, indicates that Martian soils consist predominantly of igneous minerals such as olivine, pyroxene and feldspar (approximately70 - 80%), with the balance consisting of alteration minerals such as sulfates, silica and chlorides]. These studies also showed that soil alteration did not occur in-situ and igneous and alteration components are derived from different sources. Below, we analyse the chemical abundance data obtained from shock glasses in shergottites using mass balance mixing models. In these models, the two main end members used are (a) host rock chemical composition and (b) the GM soils average composition as the second component. Here, we consider the S-bearing phases as indicators of added alteration phases in the shock glasses and GM soils. Although the S-bearing phase in shock glasses occurs as micron sized sulfide blebs, we showed in earlier abstracts that sulfur was originally present as sulfate in impact glass-precursor materials and was subsequently reduced to sulfide during shock melting. This conclusion is based on results obtained from S-K XANES studies, Fe/S atomic ratios in sulfide blebs and 34S/32S isotopic measurements in these sulfide blebs. Additionally, sulfur in several EET79001 Lith. A glasses is found to correlate positively with Al2O3 and CaO (and negatively with FeO and MgO), suggesting the presence of Al- and Ca- sul-fate-bearing phases. The distribution of the 87Sr/86Sr iso-topic ratios determined in Lith. A glasses (,27 &,188 and,54) indicate that Martian soil gypsum and host rock material were mixed with each other in the glass precursors. In some vugs in Lith A glass,27 detected gypsum laths. Furthermore, the Martian regolith-de-rived component (where sulfur typically occurs as sul-fate) is identified in these glasses by determining neutron produced isotopic excesses/deficits in 80Kr and 149Sm isotopes. Moreover, the suggestion that the large amount of sulfur found in,507 was sourced from pyrrhotite in the host rock, would require that excessive quantities of host rock would need to be stripped of sulfur to make this sulfide-rich glass. These results provide ample evidence that S occurred as sulfate and was added to glass precursor materials prior to impact shock.

Ross, D. K.↗
NASA NTRS2015

Diagenetic Mineralogy at Gale Crater, Mars

Three years into exploration of sediments in Gale crater on Mars, the Mars Science Laboratory rover Curiosity has provided data on several modes and episodes of diagenetic mineral formation. Curiosity determines mineralogy principally by X-ray diffraction (XRD), but with supporting data from thermal-release profiles of volatiles, bulk chemistry, passive spectroscopy, and laser-induced breakdown spectra of targeted spots. Mudstones at Yellowknife Bay, within the landing ellipse, contain approximately 20% phyllosilicate that we interpret as authigenic smectite formed by basalt weathering in relatively dilute water, with associated formation of authigenic magnetite as in experiments by Tosca and Hurowitz [Goldschmidt 2014]. Varied interlayer spacing of the smectite, collapsed at approximately 10 A or expanded at approximately 13.2 A, is evidence of localized diagenesis that may include partial intercalation of metal-hydroxyl groups in the approximately 13.2 A material. Subsequent sampling of stratigraphically higher Windjana sandstone revealed sediment with multiple sources, possible concentration of detrital magnetite, and minimal abundance of diagenetic minerals. Most recent sampling has been of lower strata at Mount Sharp, where diagenesis is widespread and varied. Here XRD shows that hematite first becomes abundant and products of diagenesis include jarosite and cristobalite. In addition, bulk chemistry identifies Mg-sulfate concretions that may be amorphous or crystalline. Throughout Curiosity's traverse, later diagenetic fractures (and rarer nodules) of mm to dm scale are common and surprisingly constant and simple in Ca-sulfate composition. Other sulfates (Mg,Fe) appear to be absent in this later diagenetic cycle, and circumneutral solutions are indicated. Equally surprising is the rarity of gypsum and common occurrence of bassanite and anhydrite. Bassanite, rare on Earth, plays a major role at this location on Mars. Dehydration of gypsum to bassanite in the dry atmosphere of Mars has been proposed but considered unlikely based on lab studies of dehydration kinetics in powdered samples. Dehydration is even less likely for bulk vein samples, as lab data show dehydration rates one to two orders of magnitude slower in bulk samples than in powders. On Mars, exposure ages of 100 Ma or more may be a significant factor in dehydration of hydrous phases.

Vaniman, David↗