SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A research methodology is proposed for grinding systems, for the example of gear grinding by copying on CNC machine tools. In this approach, the system is characterized in terms of input, state, and output. Methods of modeling, optimization, and control at the production and preproduction stages are described. Analysis is possible on the basis of probabilistic and frequency approaches.
A manufacturing technology has been developed for wear-resistant cast-iron grinding balls without shrinkage defects. In this method, the balls are cast in single-use sand–clay molds. A new approach to designing the casting system is developed. By numerical modeling, the time dependence of solidification is derived. As a trial, grinding balls are produced by the proposed technology.
In this study, the effects of mechanical grinding (G) assisted by endoglucanase (E) and high-pressure homogenization (H) post-treated cellulose nanofibrils (CNFs) and its film properties were investigated. Compared to only mechanical grinding, these two post-treatment processes improved the size uniformity of CNFs in width. Additionally, the crystallinity of GECNFs was increased by 4.3 % and the resulting film exhibited low oxygen permeability rate (6.33 mL/m 2 ·day). Moreover, the combination post-treatments of enzyme and homogenization improved the tensile strength and transparency of CNFs films from 132.31 MPa, 27.52 %– to 177.99 MPa, 61.75 %, respectively. Besides, a composite of acrylic resin ABPE-10 and GEHCNFs film under negative pressure improved the transparency (85.68 %) and water contact angle (104.11°) of film. This work also provides insight on the relationship between the CNFs morphology and their film properties, which can be used to improve the CNFs film performance and promote future applications of CNFs.
Loose abrasive grinding was performed on a wide range of optical workpiece materials [single crystals of Al 2 O 3 (sapphire), SiC, Y 3 Al 5 O 12 (YAG), CaF 2 , and LiB 3 O 5 (LBO); a SiO 2 -Al 2 O 3 -P 2 O 5 -Li 2 O glass-ceramic (Zerodur); and glasses of SiO 2 : TiO 2 (ULE), SiO 2 (fused silica), and P 2 O 5 -Al 2 O 3 -K 2 O-BaO (phosphate)]. Using the magneto rheological finishing (MRF) taper wedge technique (where a wedge was polished on each of the ground workpieces and the resulting samples were appropriately chemically etched), the subsurface mechanical damage (SSD) characteristics were measured. The SSD depth for most of the workpiece materials was found to scale as E1 1/2 / H 1 , where E 1 is the elastic modulus and H 1 is the hardness of the workpiece. This material scaling is the same as that for the growth of lateral cracks, suggesting that lateral cracks are a dominant source for SSD rather than radial/median cracks, as previously proposed. Utilizing the SSD depth data from both this study and others, semiempirical relationships have been formulated, which allows for estimating the SSD depth as a function of workpiece material and important grinding parameters (such as abrasive size and applied pressure).
Conversion of corn fiber to ethanol in the dry grind process could increase ethanol yields, reduce downstream processing costs and improve overall process profitability. This work investigates the in-situ conversion of corn fiber into ethanol (cellulase addition during simultaneous saccharification and fermentation) during dry grind process. Addition of 30 FPU/g fiber cellulase resulted in 4.6% increase in ethanol yield compared to the conventional process. Use of excess cellulase (120 FPU/g fiber) resulted in incomplete fermentation and lower ethanol yield compared to the conventional process. Multiple factors including high concentrations of ethanol and phenolic compounds were responsible for yeast stress and incomplete fermentation in excess cellulase experiments.
This unit process quantifies the energy use and select air emissions associated with biomass grinding. Biomass grinding is included prior to biomass combistion, either as a cofiring or standalone component. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=79F18FAE-37E2-4414-9E54-A44B033FF254
A standard overarm tracing lathe converted by the addition of an independently driven diamond grinding wheel is used for grinding aspheric surfaces. The motion of the wheel is controlled by the lathe air tracer following the template which produces the desired aspheric profile.
In ball milling metal powders to submicron size, various salts are more effective as grinding aids than conventional surfactants. Absolute ethyl alcohol is used as the grinding liquid.
Rollers guide grinding tool along prospective welding path. Skatelike fixture holds rotary grinder or file for machining large-diameter rings or ring segments in preparation for welding. Operator grasps handles to push rolling fixture along part. Rollers maintain precise dimensional relationship so grinding wheel cuts precise depth. Fixture-mounted grinder machines surface to quality sufficient for automatic welding; manual welding with attendant variations and distortion not necessary. Developed to enable automatic welding of parts, manual welding of which resulted in weld bead permeated with microscopic fissures.
Treatment similar to dental polishing used to remove microfissures from metal parts without reworking adjacent surfaces. Any variety of abrasive tips attached to small motor used to grind spot treated. Configuration of grinding head must be compatible with configurations of motor and workpiece. Devised to eliminate spurious marks on welded parts.
Air-powered grinder enables high-quality rework of welds. Tool removes excess material from back side of weld in preparation for reworking. Used on workpiece while workpiece still mounted in welding fixture or welding machine. Then rewelded in original position, so full process control maintained. Used for grinding material in spaces to which access limited, such as in pressure vessels and in hulls of ships. Also used to grind materials other than metals.
The reliability of biomass size reduction, feeding, and conversion processes remains a critical technical hurdle and important cost driver for biomass conversion systems. While Biorefinery projects have typically focused on scaling up conversion technologies that maximize yield of desired products, e.g. fuels and chemicals, solids handling and reactor feeding systems are often considered secondarily. These are frequently scaled down or adapted from other industries, without a full appreciation of how biomass heterogeneity and variability impact process reliability. Here we present the effects of feedstock variability on relative throughput, mass loss, plant uptime, operator intervention, product yield, and product quality for grinding and fast pyrolysis operations at the pilot scale. Loblolly pine residues were sourced and collected using commercial harvesting techniques. Grinding and pyrolysis experiments were performed at INL's Biomass Feedstock National User Facility and NREL's Thermal and Catalytic Process Development Unit, respectively. Preprocessing throughput using a hammer mill varied between 31-48% of nameplate capacity (5 tons/hr), and fast pyrolysis throughput varied between 57-72% of nameplate capacity (20 kg/hr) for an overall system throughput of 18-35% of nameplate capacity across biomass preprocessing and conversion to pyrolysis oil. Pyrolysis oil yields varied between 46-53% (feedstock carbon to oil, dry basis). Grinder overloads in the size reduction step were more prevalent for lower ash and higher moisture materials. During fast pyrolysis operations, downtime was caused by bridging in the feed and char removal systems and plugging in the condensation system, and significant variation in the type and frequency of operator intervention was observed between feedstocks. Cohesion of solids (feedstock and char) leading to system plugging appeared less problematic for higher ash feedstocks, and differences in condenser plugging behavior between high and low ash feedstocks indicates the composition and physical nature of the deposited material is important for process reliability and is feedstock dependent.
A method of strengthening a component made of a metallic material. The method includes subjecting the component to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure on the surface of the component, resulting in increased tensile strength of the component. A method of strengthening a component made of a TWIP steel. The method includes subjecting the component made of TWIP steel to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure containing a surface nanolaminate layer, a shear band layer, and an inner deformation twinned layer, resulting in increased tensile strength of the component. A component made of a TWIP steel containing a gradient structure with a surface nanolaminate layer, a shear band layer, and a deformation twinned layer.
A method of strengthening a component made of a metallic material. The method includes subjecting the component to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure on the surface of the component, resulting in increased tensile strength of the component. A method of strengthening a component made of a TWIP steel. The method includes subjecting the component made of TWIP steel to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure containing a surface nanolaminate layer, a shear band layer, and an inner deformation twinned layer, resulting in increased tensile strength of the component. A component made of a TWIP steel containing a gradient structure with a surface nanolaminate layer, a shear band layer, and a deformation twinned layer.
Many of the properties of Silicon carbide (SiC) are advantageous for optical applications, such as telescope mirrors and industrial laser systems. However, the base shapes of complex components are costly and difficult to manufacture. Leveraging additive manufacturing, near net complex components are readily processed. In this work, we investigate the post processing of additively manufactured SiC (AM SiC) compared to chemical vapor deposited (CVD) SiC. The specific grinding energy for the AM SiC was lower than CVD, however the trends were the same. A specular finish was observed on both materials but the AM SiC finish was limited due to residual porosity.
One of the greatest unsolved problems in chemistry is the origin of homochirality in the biosphere, that is, the fact that l-amino acids and d-sugars dominate in biology, while laboratory experiments with stereoselective reactions only produce racemic mixtures. Several models have been proposed to address the question of how enantiomerically pure solutions or crystalline phases could have emerged from a presumably racemic prebiotic world. Here we show that two populations of amino acid crystals of 'left' and 'right' hand cannot coexist in solution: one of the chiral populations disappears in an irreversible autocatalytic process that nurtures the other one. Final and complete chiral purity seems to be an inexorable fate in our systems, under grinding, in the course of the common process of growth-dissolution. This unexpected chiral symmetry breaking has become firmly established but the underlying mechanism is being debated and we have no definitive answer.
Vacancy-type defects introduced by the grinding of Czochralski-grown Si wafers were studied using monoenergetic positron beams. Measurements of Doppler broadening spectra of the annihilation radiation and the lifetime spectra of positrons showed that vacancy-type defects were introduced in the surface region (<98 nm), and the major defect species were identified as (i) relatively small vacancies incorporated in dislocations and (ii) large vacancy clusters. Annealing experiments showed that the defect concentration decreased with increasing annealing temperature in the range between 100 and 500°C. After 600–700°C annealing, the defect-rich region expanded up to about 170 nm, which was attributed to rearrangements of dislocation networks, and a resultant emission of point defects toward the inside of the sample. Above 800°C, the stability limit of those vacancies was reached and they started to disappear. After the vacancies were annealed out (900°C), oxygen-related defects were the major point defects and they were located at <25 nm.
Zinc oxide powders made by mechanical high-energy grinding have been investigated using the methods of scanning electron microscopy, thermal nitrogen desorption, and Raman spectroscopy of infrared Fourier spectroscopy. Their structural evolution, including reduction of the average size of crystallites, increase in specific surface area, as well as changes in the number and ratio of adsorption centers, has been demonstrated. The data on the reconstruction of the surface of zinc oxide powders and multiple bond breaking in near-surface areas resulting from long-term dispersion have been presented.