Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOLD ALLOY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Al{sub 15}Ge{sub 4}Ni{sub 3}: A new intergrowth structure with Cu{sub 3}Au- and CaF{sub 2}-type building blocks

The new ternary compound Al{sub 15}Ge{sub 4}Ni{sub 3} (τ{sub 2} in the system Al–Ge–Ni) was synthesized in single crystalline form by a special annealing procedure from samples located in the three phase fields [L+Al+τ{sub 2}] and [L+Ge+τ{sub 2}]. The crystal structure of Al{sub 15}Ge{sub 4}Ni{sub 3} was determined by single-crystal X-ray diffraction. The compound crystallizes in a new structure type in space group I4-bar3m, Pearson Symbol cI88, cubic lattice parameter a=11.405(1) Å. Phase diagram investigations indicate stoichiometric composition without considerable homogeneity range; τ{sub 2} melts peritectically at T=444 °C. The crystal structure of Al{sub 15}Ge{sub 4}Ni{sub 3} shows a unique combination of simple Cu{sub 3}Au- and CaF{sub 2}-type building blocks: a three dimensional network of CaF{sub 2}-type units, formed by Ni and Al atoms, is interspaced by clusters (Al{sub 6}Ge{sub 8}) resembling unit cells of the Cu{sub 3}Au-type. Both structural motifs are connected by Al–Ge bonds. The ground state energy of the compound was obtained by DFT calculations and the densities of states were analyzed in detail. In addition, electron density maps were calculated in four different sections through the unit cell using the full potential linearized augmented plane-wave (FLAPW) method. The bonding situation in Al{sub 15}Ge{sub 4}Ni{sub 3} was discussed combining results from electronic calculations with the analysis of the coordination of atoms. - Graphical abstract: The new compound Al{sub 15}Ge{sub 4}Ni{sub 3} shows a unique combination of simple Cu{sub 3}Au- and CaF{sub 2}-type building blocks. - Highlights: • The crystal structure of Al{sub 15}Ge{sub 4}Ni{sub 3} (space group I4-bar3m) was determined. • It shows a unique combination of CaF{sub 2}- and Cu{sub 3}Au-type building blocks. • Electronic (DFT) calculations were performed to gain insight to chemical bonding.

36 MATERIALS SCIENCE↗

Synthesis of core/shell nanocrystals with ordered intermetallic single-atom alloy layers for nitrate electroreduction to ammonia

Structurally ordered intermetallic nanocrystals (NCs) and single-atom catalysts (SACs) are two emerging catalytic motifs for sustainable chemical production and energy conversion. However, both have synthetic limitations which can lead to the aggregation of NCs or metal atoms. Single-atom alloys (SAAs), which contain isolated metal atoms in a host metal, can overcome the aggregation concern because of the thermodynamic stabilization of single atoms on host metal surfaces. We report a direct solution-phase synthesis of Cu/CuAu core/shell NCs with tunable SAA layers. This synthesis can be extended to other Cu/CuM (M = Pt, Pd) systems, in which M atoms are isolated in the copper host. Using this method, the density of SAAs on a copper surface can be controlled, resulting in both low and high densities of single atoms. Alloying gold into the copper matrix introduced ligand effects that optimized the chemisorption of *NO 3 and *N. As a result, the densely packed Cu/CuAu material demonstrated a high selectivity toward NH 3 from the electrocatalytic nitrate reduction reaction with an 85.5% Faradaic efficiency while maintaining a high yield rate of 8.47 mol h -1 g -1 . This work advances the design of atomically precise catalytic sites by creating core/shell NCs with SAA atomic layers, opening an avenue for broad catalytic applications.

36 MATERIALS SCIENCE↗

Platinum Electrodeposition for Supported ALD Templated Foam Hohlraum Liners

Two commercially available platinum plating solutions (Platanex III and Platanex Luna) were evaluated for the electrodeposition of platinum layers on gold hohlraums and cylindrically shaped silver-gold ingots. The successful deposition of thin Pt layers on gold hohlraums as well as thick Pt layers on silver-gold alloys will allow for the integration of atomic layer deposition templated foam inside a hohlraum. We found that when the manufacturer’s recommendations for the Pt plating solutions were used, the coatings obtained were unacceptable because of cracking, poor adhesion, or thin and powdery Pt deposits. Therefore, alternative plating parameters were investigated, and the conditions resulting in acceptable coatings are reported here.

36 MATERIALS SCIENCE↗

Formation and Stabilization of Single-Crystalline Metastable AuGe Phases in Ge Nanowires

We use in situ observations by variable temperature transmission electron microscopy on AuGe alloy drops at the tips of Ge nanowires (NWs) with systematically varying composition to demonstrate the controlled formation of metastable solid phases integrated in NWs. The process, which operates in the regime of vapor-liquid-solid growth, involves a size-dependent depression of the alloy liquidus at the nanoscale that leads to extremely Ge-rich AuGe melts at low temperatures. During slow cooling, these liquid AuGe alloy drops show pronounced departures from equilibrium, i.e., a frustrated phase separation of Ge into the adjacent solid NW, and ultimately crystallize as single-crystalline segments of metastable {gamma}-AuGe. Our findings demonstrate a general avenue for synthesizing NW heterostructures containing stable and metastable solid phases, applicable to a wide range of materials of which NWs form by the vapor-liquid-solid method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monte Carlo dosimetry for {sup 125}I and {sup 103}Pd eye plaque brachytherapy

A Monte Carlo study of dosimetry for eye plaque brachytherapy is performed. BrachyDose, an EGSnrc user code which makes use of Yegin's multi-geometry package, is used to fully model {sup 125}I (model 6711) and {sup 103}Pd (model 200) brachytherapy seeds and the standardized plaques of the Collaborative Ocular Melanoma Study (COMS). Three-dimensional dose distributions in the eye region are obtained. In general, dose to water is scored; however, the implications of replacing water with eye tissues are explored. The effect of the gold alloy (Modulay) backing is investigated and the dose is found to be sensitive to the elemental composition of the backing. The presence of the silicone polymer (Silastic) seed carrier results in substantial dose decreases relative to water, particularly for {sup 103}Pd. For a 20 mm plaque with a Modulay backing and Silastic insert, fully loaded with 24 seeds, the dose decrease relative to water is of the order of 14% for {sup 125}I and 20% for {sup 103}Pd at a distance of 1 cm from the inner sclera along the plaque's central axis. For the configurations of seeds used in COMS plaques, interseed attenuation is a small effect within the eye region. The introduction of an air interface results in a dose reduction in its vicinity which depends on the plaque's position within the eye and the radionuclide. Introducing bone in the eye's vicinity also causes dose reductions. The dose distributions in the eye for the two different radionuclides are compared and, for the same prescription dose, {sup 103}Pd generally offers a lower dose to critical normal structures. BrachyDose is sufficiently fast to allow full Monte Carlo dose calculations for routine clinical treatment planning.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

New electrocatalysts for hydrogen-oxygen fuel cells

Platinum-silver, palladium-gold, and platinum-gold alloys serve as oxygen reduction catalysts in high-current-density cells. Catalysts were tested on polytetrafluoroethylene-bonded cathodes and a hydrogen anode at an operating cell temperature of 80 degrees C.

Cattabriga, R. A.↗

Development of advanced fuel cell system

Weight, life and performance characteristics optimization of hydrogen-oxygen fuel cell power systems were considered. A promising gold alloy cathode catalyst was identified and tested in a cell for 5,000 hours. The compatibility characteristics of candidate polymer structural materials were measured after exposure to electrolyte and water vapor for 8,000 hours. Lightweight cell designs were prepared and fabrication techniques to produce them were developed. Testing demonstrated that predicted performance was achieved. Lightweight components for passive product water removal and evaporative cooling of cells were demonstrated. Systems studies identified fuel cell powerplant concepts for meeting the requirements of advanced spacecraft.

Grevstad, P. E.↗

Development of advanced fuel cell system, phase 2

A multiple task research and development program was performed to improve the weight, life, and performance characteristics of hydrogen-oxygen alkaline fuel cells for advanced power systems. Development and characterization of a very stable gold alloy catalyst was continued from Phase I of the program. A polymer material for fabrication of cell structural components was identified and its long term compatibility with the fuel cell environment was demonstrated in cell tests. Full scale partial cell stacks, with advanced design closed cycle evaporative coolers, were tested. The characteristics demonstrated in these tests verified the feasibility of developing the engineering model system concept into an advanced lightweight long life powerplant.

Handley, L. M.↗

Electrocatalysts having gold monolayers on platinum nanoparticle cores, and uses thereof

The invention relates to gold-coated particles useful as fuel cell electrocatalysts. The particles are composed of an electrocatalytically active core at least partially encapsulated by an outer shell of gold or gold alloy. The invention more particularly relates to such particles having a noble metal-containing core, and more particularly, a platinum or platinum alloy core. In other embodiments, the invention relates to fuel cells containing these electrocatalysts and methods for generating electrical energy therefrom.

30 DIRECT ENERGY CONVERSION↗

An x ray photoelectron spectroscopy study of Au(x)In(y) alloys

Four gold-indium alloys were studied by x ray photoelectron spectroscopy. The binding energies and intensity ratios of the Au 4f7/2 and In 3d5/2 core levels were determined for the bulk alloy compositions of Au(10 percent In), Au3In, AuIn, and AuIn2. These values were determined for the native oxides on the materials, for the surfaces prepared by ion bombardment to remove the oxide and for surfaces scraped in-situ with a ceramic tool to expose the bulk composition. These results furnish calibration values that allow determination of the composition of thin films of this alloy system. In addition the binding energies add to the data base for understanding the effect of alloying on core level binding energies. As an illustration, these results are used to determine the composition of a series of alloy films formed by incongruent evaporation of an alloy charge.

Jayne, Douglas T.↗

Anomalous random correlations of force constants on the lattice dynamical properties of disordered Au-Fe alloys

Here, gold iron (Au-Fe) alloys are of immense interest due to their biocompatibility, anomalous Hall conductivity, and applications in various medical treatments. However, irrespective of the method of preparation, they often exhibit a high level of disorder with properties sensitive to the thermal or magnetic annealing temperatures. We calculate the lattice dynamical properties of Au 1–x Fe x alloys using density functional theory methods where, being multisite properties, reliable interatomic force constant (IFC) calculations in disordered alloys remain a challenge. We follow a twofold approach: an accurate IFC calculation in an environment with nominally zero chemical pair correlations to mimic the homogeneously disordered alloy and a configurational averaging for the desired phonon properties (e.g., dispersion, density of states, and entropy). We find an anomalous change in the IFC's and phonon dispersion (split bands) near x=0.19, which is attributed to the local stiffening of the Au-Au bonds when Au is in the vicinity of Fe. Other results based on mechanical and thermophysical properties reflect a similar anomaly: Phonon entropy, e.g., becomes negative below x=0.19, suggesting a tendency for chemical unmixing, reflecting the onset of a miscibility gap in the phase diagram. Our results match fairly well with reported data wherever available.

36 MATERIALS SCIENCE↗

Combinatorial sputter deposition of ultrathick Au-Bi alloy films

We report gold-bismuth alloys are of interest as catalysts and catalytic sensing systems, electrochemical sensors, superconductors, and hohlraums for magnetically assisted inertial confinement fusion implosions. Radiation-hydrodynamics simulations with the Lasnex code of laser-driven hohlraums predict higher x-ray drive from Au-Bi alloys compared with cases of Au-Ta or pure Au and Bi hohlraums. Here, we use direct current magnetron sputtering in Ar gas, with co-sputtering from two elemental targets, to deposit Au-Bi alloys with Bi content of 9–77 at.% and thicknesses up to ~20 µm. Films are characterized by a combination of x-ray diffraction, Rutherford backscattering, scanning electron microscopy, substrate-curvature-based residual stress, and electronic transport measurements. Experiments are complemented by Monte Carlo simulations of ballistic sputtering and gas phase transport of depositing species and Ar gas atoms. Results show that all films are polycrystalline, with three distinct compositional regimes dominated by Au, Au 2 Bi, and Bi crystallographic phases. A metallic behavior of the temperature dependence of electrical resistivity is observed for all the films. Films with Bi content above ~30 at.% exhibit porosity, which is tolerable to hohlraum x-ray drive based on Lasnex simulations.

36 MATERIALS SCIENCE↗

Efficient Modeling of Structural, Electronic, and Optical Properties of Silver and Gold Metal Nanoclusters and Alloys Using Optimized SCC-DFTB Parameters

Computation of optical properties using conventional time-dependent density functional theory (TD-DFT) is time-consuming and memory-intensive. In this study, we investigate the accuracy and efficiency of the density functional tight binding (DFTB) framework with newly optimized Slater–Koster (SK) parameters for modeling the structural, electronic properties, and absorption spectra of silver and gold nanoclusters and their alloys. Our investigation of the ground state (GS) properties demonstrates that the newly developed GS-SK parameters enable DFTB to closely approximate DFT-calculated bond lengths for octahedron, tetrahedron, icosahedra, and truncated octahedron with sizes Ag n /Au n (n = 19, 20, 38, 55), nanoclusters and Ag 20 /Au 20 nanoalloys, with a maximum deviation of approximately 0.15 Å. Formation energy results indicate that the GS-SK parameters can closely estimate changes in formation energies with alloy composition, and the comparison of electronic structures for Ag 20 , Au 20 , and AgAu alloy nanoclusters using the DFTB approximation reveals good agreement in the projected density of states (DOS) profiles and energy levels. A second set of SK parameters, ES-SK, has been developed to describe excited state (ES) properties, including the absorption spectra of silver octahedron Ag 19 , tetrahedral Ag n (n = 20, 56, 84), truncated octahedron Ag 38 , and icosahedra Ag 55 closed-shell clusters and their gold and alloy counterparts over a broad range of alloy compositions. This parametrization uses TD-DFTB calculations and fine-tunes the d and p eigenvalues by comparing them to reference absorption spectra from first-principles TD-DFT. This enables the generation of absorption spectra that closely match the reference spectra when plasmon excitation is dominant, as demonstrated by studying the plasmonic properties of icosahedral Ag n and Au n (n = 309 and 561) nanoparticles. This includes the rapid loss in plasmon quality when Au partially replaces Ag in alloy clusters. Furthermore, these results provide a foundation for addressing computational bottlenecks in plasmonics and with new prospects for applications in the quantum plasmonics for bimetallic alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗