Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FCC metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A molecular dynamics survey of grain boundary energy in uranium dioxide and cerium dioxide

Uranium dioxide (UO 2 ) is the primary fuel material that is used in current nuclear reactors. As one of the most fundamental material parameters, grain boundary (GB) energy strongly influences many fuel properties, and the influences depend on the characters and properties of individual GBs. Using molecular dynamics simulations, a high throughput survey of GB energy in UO 2 was carried out for the purpose of elucidating the roles of GB geometry such as misorientation and inclination, as well as the bonding nature of UO 2 , in affecting GB energy. GB energies in CeO 2 were calculated as well for comparison with UO2toinvestigate the generality of GB energy anisotropy in fluorite phase oxides. The results show significant GB energy anisotropy in both UO 2 and CeO 2 that is associated with the cubic symmetry of the fluorite structure. More interestingly, the GB anisotropy is found to be dependent not only on the crystal structure but also the ionic bonding. As such, the GB energy anisotropy in fluorite oxides has significant differences compared with that in fcc metals. We report that the data obtained and the increased knowledge on GB anisotropy will facilitate GB engineering for nuclear fuels with improved properties

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Ultimate compressive strength and severe plastic deformation of equilibrated single-crystalline copper nanoparticles

Mechanical properties and deformation mechanisms of defect-free copper nanoparticles are investigated by combining experiments with atomistic simulations. The compressive strength of the particles increases with decreasing size and tends to saturate near the theoretical strength in the small-size limit. In this limit, the intrinsic size dependence of the strength is governed by the stochastic nature of dislocation nucleation near the particle surface. The particle deformation process evolves from the initial strain softening to strain hardening as the particle accumulates residual damage. The normalized strength-size relation for Cu is compared with those for Au, Ni, and Pt. The lack of universal behavior among the four FCC metals is discussed. Heavily deformed Cu nanoparticles develop polycrystalline structures and change the lattice orientation from [111] to [110]. The experiments and simulations reveal the twinning mechanism of the lattice rotation leading to the new grain formation.

36 MATERIALS SCIENCE↗
NASA NTRS1973

The influence of defects and impurities on the nucleation and growth of oriented films by evaporation

The influence of substrate imperfections on the nucleation and growth of fcc metals on alkali halides is discussed. Films deposited on well characterized substrated under well defined vacuum evaporation conditions are investigated. The experimental results of this work are correlated with similar work by other investigators. Models which have been proposed by various authors to explain experimental results are critically examined and areas of difficulty are pointed out. The influence of defects on nucleation rate and the orientation of the film is emphasized. Specific examples of impurity effects, irradiation effects and the influence of amorphous layers are discussed in detail. Evidence is shown that the formation of multiply twinned particles is a result of coalescence and growth. The only consistent model for the orienting influence of impurities is shown to be a chemical reaction effect. It is demonstrated that an alkali metal impurity is very likely responsible for the orienting influence of both water vapor exposure and irradiation. A negative result is found for the reported possibility of an orienting influence being transmitted through an amorphous layer.

Green, A. K.↗
NASA NTRS1993

Heat of segregation of single substitutional impurities

The method of Bozzolo, Ferrante and Smith (BFS) is applied for the calculation of the heat of segregation of single substitutional impurities in fcc metals. A simple equation for predicting the heat of segregation is derived for the rigid case (no atomic relaxations). The results of including atomic relaxation using a Monte Carlo method are also presented and the results compared with a number of experimental and theoretical results.

Bozzolo, Guillermo↗
NASA NTRS1994

Simulation of Tip-Sample Interaction in the Atomic Force Microscope

Recent simulations of the interaction between planar surfaces and model Atomic Force Microscope (AFM) tips have suggested that there are conditions under which the tip may become unstable and 'avalanche' toward the sample surface. Here we investigate via computer simulation the stability of a variety of model AFM tip configurations with respect to the avalanche transition for a number of fcc metals. We perform Monte-Carlo simulations at room temperature using the Equivalent Crystal Theory (ECT) of Smith and Banerjea. Results are compared with recent experimental results as well as with our earlier work on the avalanche of parallel planar surfaces. Our results on a model single-atom tip are in excellent agreement with recent experiments on tunneling through mechanically-controlled break junctions.

Good, Brian S.↗
DOE OSTI2023

Modeling laser interactions with aluminum and tantalum targets using a hybrid atomistic-continuum model

A hybrid atomistic-continuum method can model the microstructure evolution of metals subjected to laser irradiation. This method combines classical molecular dynamics (MD) simulations with the two-temperature model (TTM) to account for the laser energy absorption and heat diffusion behavior. Accurate prediction of the temperature evolution in the combined MD-TTM method requires reliable accuracy in electron heat capacity, electron thermal conductivity, and electron–phonon coupling factor across the temperatures generated. This study uses the electronic density of states (DOS) obtained from first-principle calculations. The calculated electron temperature-dependent parameters are used in MD-TTM simulations to study the laser metal interactions in FCC and BCC metals and the phenomenon of laser shock loading and melting. This study uses FCC Al and BCC Ta as model systems to demonstrate this capability. When subjected to short pulsed laser shocks, the dynamic failure behavior predicted using temperature-dependent parameters is compared with the experimentally reported single-crystal and nanocrystalline Al and Ta systems. The MD-TTM simulations also investigate laser ablation and melting behavior of Ta to compare with the ablation threshold reported experimentally. In conclusion, this manuscript demonstrates that integrating the temperature-dependent parameters into MD-TTM simulations leads to the accurate modeling of the laser–metal interaction and allows the prediction of the kinetics of the solid–liquid interface.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure sensitivity of ammonia electro-oxidation on transition metal surfaces: A first-principles study

Ammonia electro-oxidation is a promising catalytic reaction for application in alkaline fuel cells. In this paper we study the trends in this reaction on the (1 0 0) facet of eight fcc transition metals: Au, Ag, Cu, Pt, Pd, Ni, Ir, and Rh. We calculate from first-principles (DFT-GGA-PW91) the energetics for two mechanisms: (i) the N + N mechanism and (ii) the Gerischer-Mauerer mechanism. The onset potentials for both mechanisms are provided for both (1 0 0) and (1 1 1) facets. We also calculate the activation energies for the N-N bond-making non-Faradaic events on Cu, Pt, Pd, Ni, Ir, and Rh. We discover that N* – which is considered a poison for Pt(1 1 1) – is a reactive intermediate on Pt(1 0 0), allowing for a facile dimerization to N2 on Pt(1 0 0) at high potentials. We draw similar analyses for the structure sensitivity on the other metals, and we conclude with some general principles to guide catalyst design for this reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Modeling Hydrogen Evolution Reaction Kinetics through Explicit Water–Metal Interfaces

Despite the apparent simplicity of the hydrogen evolution reaction (HER) and the decades of research into it, controversy remains in the literature regarding the identity of the active site and the competition between the Heyrovsky and Tafel steps. In this work, we use charge-extrapolated ab initio simulations with explicit water in conjunction with mean-field microkinetic modeling to explore the mechanism for HER on both close-packed (111) and stepped (211) transition metals. First, we show that atop H*, beyond a monolayer of hollow H*, is unlikely to play a role in the HER mechanism, given its very positive adsorption energies. The energetics suggests the Volmer–Heyrovsky mechanism to predominate on fcc transition metals under typical operating conditions. Here, we evaluate our theoretical results vs several experimental observations. We show that the Volmer–Heyrovsky mechanism predicts an activity volcano with its peak at a H* binding ΔG H* ≈ 0 eV, consistent with experiment. In contrast, the Volmer–Tafel volcano shows a broad rate plateau between ΔG H* ≈ 0 eV and ΔG H* ≈ – 0.4 eV. We find our theoretical Tafel slopes to be consistent with experimental ones on a range of transition metals. We show that, in line with experimental observations, the introduction of a CO(g) atmosphere shifts the strong binding metals toward the weak binding leg. Our study suggests that the simple thermodynamic approach to HER activity still holds, even when a detailed kinetic picture is considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Solute effects upon dislocation motion and recovery in Mg alloys (Final Report)

The objective the research was to develop a firmer understanding of the interactions between substitutional solute atoms and dislocations within Mg alloys. These interactions govern the absolute and relative mobilities of various types of dislocations in Mg (e.g., basal < a>, non-basal < a>, and pyramidal < c+a>). Furthermore, they have an impact on dislocation recovery processes (e.g., cross-glide, climb, rearrangement, and annihilation). Ultimately, solute-dislocation interactions strongly impact a) strain hardening, b) strain rate sensitivity, c) plastic anisotropy of textured polycrystals, d) texture evolution, e) dislocation substructures evolution, and even f) recrystallization behavior. It is broadly known that Mg alloys exhibit poor low temperature formability. Since formability is largely governed by properties (a) – (c) in this list, it is critical to develop a better understanding of solute-dislocation interactions, if one hopes to improve the situation. While the theory of static solute strengthening is well developed, especially for alloys with face centered cubic (FCC) crystal structures, there are outstanding questions related to applications to hexagonal close packed (HCP) crystal structures and dynamic strain aging (DSA) in materials of various structures. DSA has far-reaching implications for metal formability and, in the case of Mg alloys, appears to correlate with the so-called rare-earth (RE) texture which has been shown to benefit formability. The Portevin-Le Chatelier (PLC) effect, and associated negative strain rate sensitivity, occur at higher temperatures (>100℃) in Mg alloys as compared with similar Al alloys, even though they have similar melting points and solute diffusivities. Our preliminary research has shown that modern, physics-based models of DSA can be tuned to describe the behavior of Mg alloys if a rather higher activation enthalpy is assumed for cross-core diffusivity. While this partially explains the delay in DSA to higher temperatures, it is also hypothesized that this delay is due in part to the intrinsically more thermally activated (rate sensitive) nature of non-basal < a> dislocation motion which is required for macroscopic flow of Mg alloys, whereas octahedral slip in many FCC metals like aluminum is essentially athermal at room temperature. It was originally proposed to employ a combination of in-situ diffraction-based experimental characterization to validate existing theory. It was envisioned to perform in-situ transmission electron microscopy (TEM) to assess individual dislocation behavior and in-situ high-energy X-ray diffraction (HEXRD) techniques which were showing great promise for elucidating collective dislocation behavior, 2 including recovery, especially if the contributions to various forms of diffraction peak broadening (𝜂𝜂,𝜔𝜔,and 2𝜃𝜃) can be effectively integrated. Finally, it was envisioned to perform discrete dislocation dynamics (DDD) modeling approaches to aide in the interpretation of both TEM and HEXRD experiments. In the end, mechanical tests were performed on more complex Mg alloys which exhibited evidence of dynamic strain aging, and this led to the establishment of another project. Mechanical test data obtained at McMaster University served as the basis of an assessment of the applicability of Bazinski’s “stress equivalence” theory of solute strengthening to polycrystalline alloys of Mg. Although we did not succeed in applying the approach to Mg alloys, we did develop expertise with the HEXRD approach using a BCC, β-Ti alloy and demonstrated numerous new capabilities that may be applied to any polycrystalline material in collaboration with researchers at CHESS and around the world: (1) assessment of details of the elastoplastic transition (yielding) using a combination of HEXRD and full-field polycrystal plasticity modeling, (2) the first-ever experimental observation of strong stress rotation within the individual grains of a polycrystalline material, and (3) a comprehensive analysis of the grain-level dislocation density evolution based upon diffraction peak broadening along 𝜂𝜂,𝜔𝜔,and 2𝜃𝜃 directions. This final aspect allowed us to confirm that dislocations were gliding on multiple plane types and not restricted to {110} type planes, and it also provided clues as to why some grains were unloading during straining, with surprising implications for our understanding of the effects of geometrically necessary dislocations (GNDs). Finally, graduate student, Mohammed Shabana, developed a MATLAB code which confirmed the conclusions of Prof. Catalin Picu (Rensallear Polytechnic Institute, RPI) regarding the effect of solute-trapped, forest dislocations on the breaking stress of Lomer lock junctions in FCC metal alloys. He applied the same anisotropic line-tension model to a variety of dislocation junction configurations and found an inconsistency in the widely cited results of Dupuy and Fivel regarding the Hirth Lock, and he outlined an approach to extend these finding to HCP Mg alloys that we are still pursuing with discretionary fundings at UVA.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Modelling of Surfaces. Part 1: Monatomic Metallic Surfaces Using Equivalent Crystal Theory

We present a detailed description of equivalent crystal theory focusing on its application to the study of surface structure. While the emphasis is in the structure of the algorithm and its computational aspects, we also present a comprehensive discussion on the calculation of surface energies of metallic systems with equivalent crystal theory and other approaches. Our results are compared to experiment and other semiempirical as well as first-principles calculations for a variety of fcc and bcc metals.

Bozzolo, Guillermo↗
DOE OSTI2025

Toward an Understanding of Linear Scaling Relations through Energy Decomposition Analysis

The discovery of linear scaling relations has fundamentally changed the field of heterogeneous catalysis. The scaling relations have been rationalized based on the d-band theory, specifically a separation of sp and d electron contributions to adsorption energies. Within the framework of energy decomposition analysis, a full understanding of such a separation would require one to further break down the adsorption energy into distinct energy components such as electrostatics, polarization, charge transfer, and van der Waals interactions, and to examine the sp and d contributions to each of them. As a step in this direction, we analyzed the interaction energy between CH x (x = 1–4) adsorbates and fcc(100) transition metal surfaces (M = Cu, Ag, Au, Rh, and Pt), with the surfaces represented both as slabs in plane-wave density functional theory (pw-DFT) calculations and as atomic clusters in atomic-orbital basis density functional theory (ao-DFT) calculations. Through an absolutely localized molecular orbital (ALMO) based energy decomposition analysis of the ao-DFT adsorption energy, each of the interaction energy components (electrostatics, polarization, van der Waals, and charge transfer) was found to follow its own scaling relations, with an intricate interplay among these energy components yielding the overall scaling relations for the total adsorption energies. Using the recently introduced ALMO-based polarization and charge-transfer analysis schemes, we further dissected polarization into metal surface and adsorbate contributions, and charge transfer into metal → adsorbate and adsorbate → metal contributions. The contributions from the sp and d electrons of the metal to these terms were further quantified, and the dominant role of the metal d electrons was reaffirmed. These results shed light on how CHx adsorbates interact with metal surfaces and further reveal the physical origin of the scaling relations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure, stability, and superconductivity of N-doped lutetium hydrides at kbar pressures

Here, the structure of the material responsible for the room temperature and near ambient pressure superconductivity reported in an N-doped lutetium hydride has not been conclusively determined. Herein, density functional theory calculations are performed in an attempt to uncover what it might be. Guided by a range of strategies including crystal structure prediction and modifications of existing structure types, we present an array of Lu-N-H phases that are dynamically stable at experimentally relevant pressures. Although none of the structures found are thermodynamically stable, and none are expected to remain superconducting above ~17 K at 10 kbar, a number of metallic compounds with fcc Lu lattices – as suggested by the experimental X-ray diffraction measurements of the majority phase – are identified. The system whose calculated equation of states matches best with that measured for the majority phase is fluorite-type LuH 2 , whose 10 kbar superconducting critical temperature was estimated to be 0.1 K using the Allen-Dynes modified McMillan equation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Orbital correlations in ultrathin films of late transition metals

We develop a two-orbital Hubbard model of electron correlations in ultrathin (111)-oriented fcc films of late transition metals such as Co and Ni. Our model indicates that the Mott-Hund’s interaction results in ferromagnetic nearest-neighbor orbital correlations. Frustration associated with the mismatch between orbital and crystal symmetries prevents orbital ordering, resulting in the orbital liquid state. This state can be manifested in phenomena involving spin-orbit coupling, such as magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Experimental methodology and theoretical framework in describing constrained plastic flow of FCC microscale tensile specimens

Small scale mechanical testing (SSMT) allows for the quantification of the mechanical responses for microscale and nanoscale material volumes. It has significant potential in improving our fundamental understanding of plastic deformation and in providing an engineering solution for testing complex and/or critical materials. Importantly, previous studies have revealed that plastic intermittency, manifested as strain bursts, are characteristic of the plastic flow behavior at the small length scale. In this work, interfacial constraint has been utilized to suppress strain bursts in order to stabilize plasticity. A new parameter, blocked volume ratio (BVR), is introduced to quantify the degree of constraint for a microscale specimen due to an interface. Here, we showed that the plastic flow behavior in FCC Ni-based metals is highly dependent on the BVR of the specimen.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Investigation of Three-Dimensional Stress Fields and Slip Systems for FCC Single Crystal Superalloy Notched Specimens

Metals and their alloys, except for a few intermetallics, are inherently ductile, i.e. plastic deformation precedes fracture in these materials. Therefore, resistance to fracture is directly related to the development of the plastic zone at the crack tip. Recent studies indicate that the fracture toughness of single crystals depends on the crystallographic orientation of the notch as well as the loading direction. In general, the dependence of crack propagation resistance on crystallographic orientation arises from the anisotropy of (i) elastic constants, (ii) plastic deformation (or slip), and (iii) the weakest fracture planes (e.g. cleavage planes). Because of the triaxial stress state at the notch tips, many slip systems that otherwise would not be activated during uniaxial testing, become operational. The plastic zone formation in single crystals has been tackled theoretically by Rice and his co-workers and only limited experimental work has been conducted in this area. The study of the stresses and strains in the vicinity of a FCC single crystal notch tip is of relatively recent origin. We present experimental and numerical investigation of 3D stress fields and evolution of slip sector boundaries near notches in FCC single crystal tension test specimens, and demonstrate that a 3D linear elastic finite element model that includes the effect of material anisotropy is shown to predict active slip planes and sectors accurately. The slip sector boundaries are shown to have complex curved shapes with several slip systems active simultaneously near the notch. Results are presented for surface and mid-plane of the specimens. The results demonstrate that accounting for 3D elastic anisotropy is very important for accurate prediction of slip activation near FCC single crystal notches loaded in tension. Results from the study will help establish guidelines for fatigue damage near single crystal notches.

Arakere, Nagaraj K.↗