Results for “Ecosystem engineering” — Page 4

NASA NTRSDate not supplied

The Effective Use of Metrics in Space Life Support System Trade-Offs

Engineering metrics are useful in space life support technology selection, but they must be carefully used. Metrics are only part of a complete system trade-off. Metrics do harm if they cause neglect of other important technical, organizational, or intuitive decision factors. Two metrics have damaged space life support, closure and Equivalent Systems Mass (ESM). Closure measures the fraction of the required system inputs that are produced by recycling system outputs. Increasing closure produces diminishing returns and becomes increasingly expensive. Increasing closure does not directly contribute to providing better life support. ESM measures the total launch mass required to provide life support. ESM includes the mass of the system hardware and of its power, cooling, pressurized volume, spares, and logistics. ESM predicts launch costs, but recently launch costs have been reduced by a factor of 20 or more. System development cost for space hardware is often much greater than launch cost. The past nearly exclusive use of ESM has led to the neglect of Life Cycle Cost (LCC), reliability, cost, and the other engineering factors. Closure and ESM have misguided space life support technology selection for more than twenty years and have adversely affected the expenditure of 100’s of millions of dollars. Metrics can be effectively used three ways in space life support technology selection: 1. A small set of key engineering metrics for preliminary screening. 2. A full set of engineering to guide technical selection. 3. Combining engineering metrics with organizational, political, and intuitive decision factors to understand technology selection. The past emphasis on closure and ESM served to support recycling life support over resupply and built on the intuitive appeal of a human ecosystem in space.

Harry W. Jones↗

NASA NTRSDate not supplied

Building a Bilingual Google Earth Engine Dashboard to Increase Accessibility to Long-term Time Series Remote Sensing Data for Monitoring Saline System Changes in Chile’s Atacama Desert

Saline systems, consisting of salt flats, ponds, and marshes, provide vital water resources to wildlife and communities in northern Chile’s Atacama Desert, one of the driest regions in the world. Mining is extensive in the Atacama, which contains 30% of the world’s lithium reserves and is abundant in potassium and boron. The groundwater that feeds into salt marshes and ponds is extracted in large volumes for mining operations, limiting the availability of water for ecosystems. However, identifying long-term and large-scale environmental impacts from local lithium mining on the saline systems is limited by region inaccessibility and terrain variability. Open access satellite imagery and cloud computing technology has made studying Atacama saline systems feasible and allowed for collaboration across different agencies and countries. The NASA DEVELOP Program partnered with Chile’s la Universidad de La Serena and Servicio Nacional de Geología y Minería (SERNAGEOMIN) to create the Saline Analysis Tool (SalT) in Google Earth Engine (GEE). SalT is used to analyze the extent and distribution of remote saline systems in the Atacama from 1986 to the present day. The tool filters Landsat 5 Thematic Mapper (TM) and Landsat 8 Operational Land Imager (OLI) data from GEE’s data catalog and creates a single composite image per year for analysis. Additional output analyses include land cover classification, Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) raster images that can be displayed on the map interface or exported. The tool can also generate time-lapse videos and charts displaying NDVI, NDWI, and land cover over time. A key feature of the tool is the use of a bilingual graphical user interface to make analysis accessible and customizable to different users’ needs—SalT provides options to select an analysis area, analysis time period, and outputs to display or export. The tool also incorporates new Earth observations as they are added to GEE’s catalog. The ability to easily visualize and analyze long-term remote sensing imagery will enable SERNAGEOMIN and la Universidad de la Serena to continually monitor changes in these saline systems and inform future land management policy.

NASA DEVELOP↗

NASA NTRS2010

Monitoring Coastal Marshes for Persistent Flooding and Salinity Stress

Our objective is to provide NASA remote sensing products that provide inundation and salinity information on an ecosystem level to support habitat switching models. Project born out of need by the Coastal Restoration Monitoring System (CRMS), joint effort by Louisiana Department of Natural Resources and the U.S. Geological Survey, for information on persistence of flooding by storm surge and other flood waters. The results of the this work support the habitat-switching modules in the Coastal Louisiana Ecosystem Assessment and Restoration (CLEAR) model, which provides scientific evaluation for restoration management. CLEAR is a collaborative effort between the Louisiana Board of Regents, the Louisiana Department of Natural Resources (LDNR), the U.S. Geological Survey (USGS), and the U.S. Army Corps of Engineers (USACE). Anticipated results will use: a) Resolution enhanced time series data combining spatial resolution of Landsat with temporal resolution of MODIS for inundation estimates. b) Potential salinity products from radar and multispectral modeling. c) Combined inundation and salinity inputs to habitat switching module to produce habitat switching maps (shown at left)

Kalcic, Maria↗

NASA NTRS2022

Application Table: A Bridge Connecting the Designing “With-The-Material” and “The-Material” Paradigms

Over the last few decades, advances in high-performance computing, new material characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. In 2016 NASA sponsored a 2040 Vision study (which appeared in 2018) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. The study envisions a cyber-physical-social ecosystem comprised of experimentally verified and validated (V & V) computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of “fit-for-purpose” materials, components, and systems. Consequently, the development of a robust information management system that incorporates (across the full life cycle) both experimental (real data) and virtual data resulting from the application of various simulation tools (at single or multiple length scales), therefore enabling the virtual design and optimization of materials throughout their processing – internal structure – property – performance envelope, has become critical. This need is also fueled by the demands for higher efficiency in material testing; consistency, quality, and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. This is particularly true when attempting to merge ICME practices with recent additive manufacturing technology which will enable production of the resulting 2040 Vision material and structural designs. At NASA Glenn Research Center we are exploring the future of material science through the use of novel characterization methodologies, high performance computing, and recently an emphasis on integrated computational materials engineering (ICME). Herein, recent efforts to incorporate an Application Table within NASA Glenn Research Center’s ICME Granta MI database is presented. The goal is to provide a place where material and structural application information/requirements can be linked so as to marry the “design the-material” and the “design-with-material” paradigms and thereby enable application-driven design and optimization of materials and structures by providing a central location that links material processing at various length scales to the application’s performance requirements. This paper discusses the specifics of this Application Table as well as best practices and key principles for the development of a robust materials information management system to enable the 2040 Vision integrated materials and structures ecosystem. Furthermore, it presents the intended role of the Application Table in the future of ICME design of “fit-for-purpose” materials, showing the need for a well-established framework that can successfully bridge the gap between the design “the material” and design “with-the-material” paradigms.

Materials↗

NASA NTRSDate not supplied

Application Table: A Bridge Connecting the Designing “With-the-Material” and “the-Material”

Over the last few decades, advances in high-performance computing, new material characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. In 2016 NASA sponsored a 2040 Vision study (which appeared in 2018) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. The study envisions a cyber-physical-social ecosystem comprised of experimentally verified and validated (V & V) computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of “fit-for-purpose” materials, components, and systems. Consequently, the development of a robust information management system that incorporates (across the full life cycle) both experimental (real data) and virtual data resulting from the application of various simulation tools (at single or multiple length scales), therefore enabling the virtual design and optimization of materials throughout their processing – internal structure – property – performance envelope, has become critical. This need is also fueled by the demands for higher efficiency in material testing; consistency, quality, and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. This is particularly true when attempting to merge ICME practices with recent additive manufacturing technology which will enable production of the resulting 2040 Vision material and structural designs. At NASA Glenn Research Center we are exploring the future of material science through the use of novel characterization methodologies, high performance computing, and recently an emphasis on integrated computational materials engineering (ICME). Herein, recent efforts to incorporate an Application Table within NASA Glenn Research Center’s ICME Granta MI database is presented. The goal is to provide a place where material and structural application information/requirements can be linked so as to marry the “design the-material” and the “design-with-material” paradigms and thereby enable application-driven design and optimization of materials and structures by providing a central location that links material processing at various length scales to the application’s performance requirements. This paper discusses the specifics of this Application Table as well as best practices and key principles for the development of a robust materials information management system to enable the 2040 Vision integrated materials and structures ecosystem. Furthermore, it presents the intended role of the Application Table in the future of ICME design of “fit-for-purpose” materials, showing the need for a well-established framework that can successfully bridge the gap between the design “the material” and design “with-the-material” paradigms.

Materials↗

NASA NTRS2018

Vision 2040: A Roadmap for Integrated, Multiscale Modeling and Simulation of Materials and Systems

Over the last few decades, advances in high-performance computing, new materials characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) and additive manufacturing have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. While these advances have driven significant progress in the development of aerospace components and systems, that progress has been limited by persistent technology and infrastructure challenges that must be overcome to realize the full potential of integrated materials and systems design and simulation modeling throughout the supply chain. As a result, NASA's Transformational Tools and Technology (TTT) Project sponsored a study (performed by a diverse team led by Pratt & Whitney) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This report describes the findings of this 2040 Vision study (e.g., the 2040 vision state; the required interdependent core technical work areas, Key Element (KE); identified gaps and actions to close those gaps; and major recommendations) which constitutes a community consensus document as it is a result of over 450 professionals input obtain via: 1) four society workshops (AIAA, NAFEMS, and two TMS), 2) community-wide survey, and 3) the establishment of 9 expert panels (one per KE) consisting on average of 10 non-team members from academia, government and industry to review, update content, and prioritize gaps and actions. The study envisions the development of a cyber-physical-social ecosystem comprised of experimentally verified and validated computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of fit-for-purpose materials, components, and systems. Although the vision focused on aeronautics and space applications, it is believed that other engineering communities (e.g., automotive, biomedical, etc.) can benefit as well from the proposed framework with only minor modifications. Finally, it is TTT's hope and desire that this vision provides the strategic guidance to both public and private research and development decision makers to make the proposed 2040 vision state a reality and thereby provide a significant advancement in the United States global competitiveness.

multi-scale modeling↗

NASA NTRS2022

Surface Biology and Geology (SBG) Thermal Infrared (TIR) Free -Flyer Concept

Scientists and engineers from the United States and Italy are developing a thermal infrared (TIR) free-flyer concept that forms an essential element of the NASA Surface Biology & Geology (SBG) designated observable and the greater NASA Earth System Observatory (ESO), which also includes observations of aerosols, clouds, convection, and precipitation; mass change; and surface deformation & change.In response to the recommendations from the 2017 National Academies decadal survey for Earth science, NASA initiated the SBG designated observable with five key research and applications focus areas: ecosystems and natural resources, hydrology, weather, climate, and solid Earth. SBG includes spaceborne measurements of hyperspectral imagery in the visible to shortwave infrared (0.4-2.5 um) and multispectral imagery in the mid and thermal infrared (3-12 um) that provide the remote sensing data needed to inform each research and applications area. High-level TIR data products include Earth surface temperature & emissivity, evapotranspiration, substrate composition, volcanic plumes, and high-temperature features. While the science, applications, and technology build on prior mission studies conducted for more than a decade, it has only been recently that a joint team of scientists and engineers from the NASA Jet Propulsion Laboratory (JPL), Agenzia Spaziale Italiana (ASI), Istituto Nazionale Geofisica e Volcanologia (INGV), and the Istituto Nazionale Astrofisica (INAF) have developed a compelling concept for a TIR free-flyer. In this concept, the TIR instrument is an eight-band radiometer. Seven of the bands are between 3 and 12 um with an additional band at 1.65 um. The instrument’s 68.8 deg total viewing angle and the free-flyer’s 665 km operational altitude results in a ground sampling distance (GSD) of <60 m at nadir, produces a swath width of 935 km, and allows for a 2-3-day revisit time. A two-band visible and near infrared (VNIR) camera, with <30 m GSD at nadir and 935 km swath width, will complement the TIR instrument. VNIR high-level data products include top & bottom of atmosphere reflectance and normalized difference vegetation indices (NDVI). The TIR instrument and VNIR camera will be mounted on a PLATiNO+ spacecraft, a multi-application, reconfigurable, and scalable platform. The launcher selected for the TIR free-flyer is the VEGA-C. To maximize the science and applications benefits the SBG-TIR free-flyer team are collaborating with personnel from the ESA Land Surface Temperature Monitoring mission (LSTM) as well individuals from the Thermal Infrared Imaging Satellite for High-resolution Natural resource Assessment (TRISHNA), a joint mission by CNES and ISRO. Pre-Phase A concept studies for the SBG-TIR free-flyer commenced in the spring 2021. This allows for the concept to be refined; for technical risks to be identified and mitigated, as necessary; and strategies for reducing the development schedule to be defined and assessed before conducting a NASA-ASI Mission Concept Review (MCR) in the spring of 2022 and a NASA Key Decision Point-A (KDP-A) as early as the summer of 2022. These are key milestones in being able to launch and begin operating the SBG-TIR free-flyer in the second half of the decade, so that many of the questions posed by the National Academies in the 2017 decadal survey can be answered.

Fabrizia-Buongiorno, Maria↗

NASA NTRS1992

Life sciences and space research XXIV(4) - Natural and artificial ecosystems; Proceedings of the Topical Meeting of the Interdisciplinary Scientific Commission F (Meetings F10, F11, F1 and F12) of the COSPAR 28th Plenary Meeting, The Hague, Netherlands, June 25-July 6, 1990

The present conference on natural and artificial ecosystems and their application to space research encompasses both in-flight and ground-based issues of recycling and control in regenerative life support, the relationships of productivity and facility design in higher plant growth, life-support systems for manned missions to Mars, and biochemical engineering applications in space. Specific issues addressed include interface problems between material recycling systems and plants, temperature and humidity control on a lunar base, the CELSS Test-Facility Project, achieving closure in plant-growth facilities, and life-support systems for Mars transit. Also addressed are a closed equilibrated biological aquatic system, a simulated Mars outpost in the Antarctica dry valleys, analyses of human kidney-cell populations separated on the space shuttle, and the evolution of a phase-separated gravity-independent bioreactor.

Macelroy, R. D.↗

NASA NTRSDate not supplied

Using Earth Observations to Analyze Vegetation Phenology and Climatology in Bhutan to Identify Forest Disturbance

Changes in climate in the Himalayan region cause variability in temperature, precipitation, and phenology. It can also impact the health of coniferous forest ecosystems including increased damage due to aggressive forest pests. Forest disturbance from bark beetle is a major concern in Bhutan, sometimes causing extensive tree mortality to pine and spruce forests. Climatological trends and changes in vegetation phenology were analyzed and incorporated into a tool in Google Earth Engine that identified patches of forest disturbance in Bhutan. Preprocessed phenology and meteorological data from the Advanced Very High-Resolution Radiometer (AVHRR) and Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS), along with Climate Hazards Center Infrared Precipitation with Station (CHIRPS), Famine Early Warning System Network Land Data Assimilation System (FLDAS), Sentinel-2 Multispectral Instrument (MSI), and Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper (ETM)+, and Landsat 8 Operational Land Imager (OLI) were used within the tool. Changes in temperature, precipitation, and phenology were analyzed throughout Bhutan, and forest disturbance caused by bark beetle was investigated in two districts of the country

Tashi Choden↗

NASA NTRSDate not supplied

Architectural Framework for Conceptualizing Exploration Class Medical Operations

Currently, discrete projects within NASA’s Human Research Program (HRP) take aim at providing future exploration missions with the capabilities necessary to operate within a progressively Earth-independent operative environment. Realizing an entire ecosystem that can accomplish these goals requires a clear visualization on how each project contributes to the overall objectives of Human Health and Performance (HH&P) in that context. The Exploration Medical Capability (ExMC) Element has developed an architectural framework for exploration class medical operations by utilizing a systems engineering approach using model-based systems engineering (MBSE). This model, a System of Systems Architecture (SoSA), captures a means of integrating various independent but related efforts into a comprehensive view associated with HRP’s goal of providing progressively Earth-Independent Medical Operations (EIMO). This level of visibility is realized by identifying interfaces between development efforts and existing programs that contribute to the overall mission of EIMO even if those extend past the traditional boundary of HRP. Potential interfaces that are considered important when constructing an architecture include program/project Needs, Goals, and Objectives (NGOs), capabilities, envisioned use cases/scenarios, and system/subsystem structure. This presentation will focus on the processes that were used to generate the SoSA along with a means to realize its utility amongst other MBSE products from ExMC. Evaluation of the best architecture moving forward can then be achieved that promotes cohesion between various functional areas of HH&P. Additionally, the SoSA is developed with a long-term vision for the dynamic integration of novel technological developments that may be implemented in the future. The SoSA is intended to enable Stakeholders the ability to view the broader interconnections that exist and begin to create avenues of communication between various efforts. The benefits of a SoSA provide an essential step towards addressing the unique challenges of attaining the goals of broader exploration class medical missions of the future.

Systems engineering↗

NASA NTRS2024

Architectural Framework for Conceptualizing Exploration Class Medical Operations

Currently, discrete projects within NASA’s Human Research Program (HRP) take aim at providing future exploration missions with the capabilities necessary to operate within a progressively Earth-independent operative environment. Realizing an entire ecosystem that can accomplish these goals requires a clear visualization on how each project contributes to the overall objectives of Human Health and Performance (HH&P) in that context. The Exploration Medical Capability (ExMC) Element has developed an architectural framework for exploration class medical operations by utilizing a systems engineering approach using model-based systems engineering (MBSE). This model, a System of Systems Architecture (SoSA), captures a means of integrating various independent but related efforts into a comprehensive view associated with HRP’s goal of providing progressively Earth-Independent Medical Operations (EIMO). This level of visibility is realized by identifying interfaces between development efforts and existing programs that contribute to the overall mission of EIMO even if those extend past the traditional boundary of HRP. Potential interfaces that are considered important when constructing an architecture include program/project Needs, Goals, and Objectives (NGOs), capabilities, envisioned use cases/scenarios, and system/subsystem structure. This presentation will focus on the processes that were used to generate the SoSA along with a means to realize its utility amongst other MBSE products from ExMC. Evaluation of the best architecture moving forward can then be achieved that promotes cohesion between various functional areas of HH&P. Additionally, the SoSA is developed with a long-term vision for the dynamic integration of novel technological developments that may be implemented in the future. The SoSA is intended to enable Stakeholders the ability to view the broader interconnections that exist and begin to create avenues of communication between various efforts. The benefits of a SoSA provide an essential step towards addressing the unique challenges of attaining the goals of broader exploration class medical missions of the future.

Systems engineering↗

NASA NTRS1991

A pointable, helicopter-based remote sensing data acquisition system for collecting bidirectional reflectance data

Discussed here is a new configuration of a helicopter-borne remote sensing system to support field measurements programs such as studies of forest decline damage associated with atmospheric deposition and the Forest Ecosystems Dynamics project. In this new configuration, the sensor payload is mounted externally on a hinged pallet located on the starboard side of the Bell Iroquois UH-1B (HUEY) helicopter. The sensor payload includes a set of bore-sighted instruments consisting of a Barnes Modular Multiband Radiometer (MMR), a Spectron Engineering (SE) 590 spectroradiometer, an Everest infrared temperature sensor, and a Sony CCD video camera with a 10x zoom lens. The system was tested and excellent data was acquired in 1990.

Williams, Darrel L.↗

NASA NTRS2019

2040 Vision Study: an Enlargement of Model Based Engineering

Over the last few decades, advances in high-performance computing, new materials characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) and additive manufacturing have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. As a result, NASA's Transformational Tools and Technology (TTT) Project sponsored a study (performed by a team led by Pratt & Whitney) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This talk will briefly review the findings of this 2040 Vision study (e.g., the 2040 vision state; the required interdependent core technical work areas, Key Element (KE); associated critical gaps and actions to close those gaps; and major recommendations). The study, NASA CR 2018- 219771, envisions the development of a cyber-physical-social ecosystem comprised of experimentally verified and validated computational models, tools, and techniques, along with the associated digital tapestry, that marries two non-mutually exclusive paradigms _ "design of the materials" (material scientist viewpoint) and "design with the materials" (structural analyst viewpoint) _ into a concurrent transformational paradigm that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of fit-for-purpose materials, components, and systems. Although the vision focused on aeronautics and space applications, it is believed that other engineering communities (e.g., automotive, biomedical, etc.) can benefit as well from the proposed framework with only minor modifications. Finally, it is TTT's hope and desire that this vision provides the strategic guidance to both public and private research and development decision makers to make the proposed 2040 vision state a reality and thereby provide a significant advancement in the United States global competitiveness.

Arnold, Steven M.↗

NASA NTRS2021

Space-Borne Cloud-Native Satellite-Derived Bathymetry (SDB) Models Using ICESat-2 And Sentinel-2

Shallow nearshore coastal waters provide a wealth of societal, economic and ecosystem services, yet their topographic structure is poorly mapped due to a reliance upon expensive and time intensive methods. Space‐borne bathymetric mapping has helped address these issues, but has remained largely dependent upon in situ measurements. Here we fuse ICESat‐2 lidar data with Sentinel‐2 optical imagery, within the Google Earth Engine cloud platform, to create openly available spatially continuous high‐resolution bathymetric maps at regional‐to‐national scales in Florida, Crete and Bermuda. ICESat‐2 bathymetric classified photons are used to train three Satellite Derived Bathymetry (SDB) methods, including Lyzenga, Stumpf and Support Vector Regression algorithms. For each study site the Lyzenga algorithm yielded the lowest RMSE (approx. 10‐15%) when compared with validation data. We demonstrate a means of using ICESat‐2 for both model calibration and validation, thus cementing a pathway for fully space‐borne estimates of nearshore bathymetry in shallow, clear water environments.

N. Thomas↗

NASA NTRS2013

PHyTIR - A Prototype Thermal Infrared Radiometer

This paper describes the PHyTIR (Prototype HyspIRI Thermal Infrared Radiometer) instrument, which is the engineering model for the proposed HyspIRI (Hyperspectral Infrared Imager) earth observing instrument. The HyspIRI mission would be comprised of the HyspIRI TIR (Thermal Infrared Imager), and a VSWIR (Visible Short-Wave Infra-Red Imaging Spectrometer). Both instruments would be used to address key science questions related to the earth's carbon cycle, ecosystems, climate, and solid earth properties. Data gathering of volcanic activities, earthquakes, wildfires, water use and availability, urbanization, and land surface compositions and changes, would aid the predictions and evaluations of such events and the impact they create. Even though the proposed technology for the HyspIRI imager is mature, the PHyTIR prototype is needed to advance the technology levels for several of the instrument's key components, and to reduce risks, in particular to validate 1) the higher sensitivity, spatial resolution, and higher throughput required for this focal plane array, 2) the pointing accuracy, 2) the characteristics of several spectral channels, and 4) the use of ambient temperature optics. The PHyTIR telescope consists of the focal plane assembly that is housed within a cold housing located inside a vacuum enclosure; all mounted to a bulkhead, and an optical train that consists of 3 powered mirrors; extending to both sides of the bulkhead. A yoke connects the telescope to a scan mirror. The rotating mirror enables to scan- a large track on the ground. This structure is supported by kinematic mounts, linking the telescope assembly to a base plate that would also become the spacecraft interface for HyspIRI. The focal plane's cooling units are also mounted to the base plate, as is an overall enclosure that has two viewing ports with large exterior baffles, shielding the focal plane from incoming stray light. PHyTIR's electronics is distributed inside and near the vacuum enclosure, and in a nearby rack. The data acquisition technique would be to take measurements over a 51deg wide swath in the cross spacecraft velocity direction, which is brought into view through the rotating scan mirror. A landscape mosaic thus can be assembled by overlaying rows of measurements. The paper briefly outlines the proposed HyspIRI mission and its data acquisition technique; it then describes the prototype PHyTIR instrument.

Space Instrument↗

NASA NTRSDate not supplied

2040 Vision Study: NASA’s T3 Implementation Activities

Over the last few decades, advances in high-performance computing, new materials characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) and additive manufacturing have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. As a result, NASA’s Transformational Tools and Technology (TTT) Project sponsored a study (performed by a team led by Pratt & Whitney) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This talk will briefly review the findings of this 2040 Vision study (e.g., the 2040 vision state; the required interdependent core technical work areas, Key Element (KE); associated critical gaps and actions to close those gaps; and major recommendations) and discuss NASA’s TTT implementation activities, with special emphasis on recent accomplishments. The study, NASA CR 2018- 219771, envisions the development of a cyber-physical-social ecosystem comprised of experimentally verified and validated computational models, tools, and techniques, along with the associated digital tapestry, that marries two non-mutually exclusive paradigms – “design of the materials” (material scientist viewpoint) and “design with the materials” (structural analyst viewpoint) – into a concurrent transformational paradigm that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of fit-for-purpose materials, components, and systems. Although the vision focused on aeronautics and space applications, it is believed that other engineering communities (e.g., automotive, biomedical, etc.) can benefit as well from the proposed framework with only minor modifications. Finally, it is TTT’s hope and desire that this vision provides the strategic guidance to both public and private research and development decision makers to make the proposed 2040 vision state a reality and thereby provide a significant advancement in the United State's global competitiveness

Materials↗

NASA NTRS2023

Broader Impacts and Outreach Videos on Ocean Physics and Biogeochemistry

This is just a preliminary NF1676 in advance of filming for a project....A convergent team of experts in biology, chemistry, physics, engineering, mathematics, and computational modeling examine how dynamic and coupled phytoplankton-pathogen-particle-predator linkages coalesce to explain the observed high spatial variability in the efficiency of the export of particulate organic carbon (POC) to the deep ocean. They elucidate and quantify the linkages between viruses and ballast minerals to increase understanding of carbon cycling in the oceanic biological carbon pump and the impact of viruses within it. By providing knowledge than can be used to improve the parameterization of carbon export in Earth system models, the project will help reduce uncertainty in regional marine biogeochemical projections, potentially improving marine ecosystem and fisheries management on timescales from seasons to decades. The project includes activities that provide teaching resources and hands-on training to educators within a ‘Tools of Science’ program that provides a simple and succinct way to communicate the process of scientific research to students in a way that is useful to teachers. The project couples laboratory-based experiments on model host-virus-grazer systems with extensive field based observational and manipulative studies on natural populations of diatoms and coccolithophores, the two phytoplankton groups that account for most of the estimated particulate organic matter flux to the deep ocean. Experiments and measurements integrate diagnostic biological and chemical controls on infection and particle coagulation theory with microscale physics and grazing to quantify links to each hypothesized export mechanism under field-relevant turbulent conditions. Cutting-edge engineering and analytical tools are used to diagnose and track infection dynamics while characterizing and quantifying particle aggregation and disaggregation, mineral dissolution, sinking dynamics, grazing rates, and fecal pellet production at unprecedented resolution and under well-defined, microscale physical regimes. Field campaigns elucidate the relative efficiency of hypothesized mechanisms in stimulating POC export in natural blooms, while providing bulk and size-resolved estimates of POC flux.

Daniel B Whitt↗

NASA NTRS2000

BOREAS TE-10 Leaf Optical Properties

The Boreal Ecosystem-Atmospheric Study (BOREAS) TE-10 (Terrestrial Ecology) team collected several data sets in support of its efforts to characterize and interpret information on the reflectance, transmittance, gas exchange, oxygen evolution, and biochemical properties of boreal vegetation. This data set describes the spectral optical properties (reflectance and transmittance) of boreal forest conifers and broadleaf tree leaves as measured with a Spectron Engineering SE590 spectroradiometer at the Southern Study Area Old Black Spruce (SSA OBS), Old Jack Pine (OJP), Young Jack Pine (YJP), Old Aspen (OA), Old Aspen Auxiliary (OA-AUX), Young Aspen Auxiliary (YA-AUX), and Young Aspen (YA) sites. The data were collected during the growing seasons of 1994 and 1996 and are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗