Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Early Evaluation of the VIIRS Calibration, Cloud Mask and Surface Reflectance Earth Data Records

Surface reflectance is one of the key products fromVIIRS and as withMODIS, is used in developing several higherorder land products. The VIIRS Surface Reflectance (SR) Intermediate Product (IP) is based on the heritageMODIS Collection 5 product (Vermote, El Saleous, & Justice, 2002). The quality and character of surface reflectance depend on the accuracy of the VIIRS Cloud Mask (VCM), the aerosol algorithms and the adequate calibration of the sensor. The focus of this paper is the early evaluation of the VIIRS SR product in the context of the maturity of the operational processing system, the Interface Data Processing System (IDPS). After a brief introduction, the paper presents the calibration performance and the role of the surface reflectance in calibration monitoring. The analysis of the performance of the cloud mask with a focus on vegetation monitoring (no snow conditions) shows typical problems over bright surfaces and high elevation sites. Also discussed is the performance of the aerosol input used in the atmospheric correction and in particular the artifacts generated by the use of the Navy Aerosol Analysis and Prediction System. Early quantitative results of the performance of the SR product over the AERONET sites showthatwith the fewadjustments recommended, the accuracy iswithin the threshold specifications. The analysis of the adequacy of the SR product (Land PEATE adjusted version) in applications of societal benefits is then presented. We conclude with a set of recommendations to ensure consistency and continuity of the JPSS mission with the MODIS Land Climate Data Record.

Surface reflectance↗
NASA NTRS2017

So, How Much of the Earth's Surface Is Covered by Rain Gauges?

The measurement of global precipitation, both rainfall and snowfall, is critical to a wide range of users and applications. Rain gauges are indispensable in the measurement of precipitation, remaining the de facto standard for precipitation information across Earths surface for hydrometeorological purposes. However, their distribution across the globe is limited: over land their distribution and density is variable, while over oceans very few gauges exist and where measurements are made, they may not adequately reflect the rainfall amounts of the broader area. Critically, the number of gauges available, or appropriate for a particular study, varies greatly across the Earth owing to temporal sampling resolutions, periods of operation, data latency, and data access. Numbers of gauges range from a few thousand available in near real time to about 100,000 for all official gauges, and to possibly hundreds of thousands if all possible gauges are included. Gauges routinely used in the generation of global precipitation products cover an equivalent area of between about 250 and 3,000 sq m. For comparison, the center circle of a soccer pitch or tennis court is about 260 sq m. Although each gauge should represent more than just the gauge orifice, autocorrelation distances of precipitation vary greatly with regime and the integration period. Assuming each Global Precipitation Climatology Centre (GPCC) available gauge is independent and represents a surrounding area of 5-km radius, this represents only about 1% of Earths surface. The situation is further confounded for snowfall, which has a greater measurement uncertainty.

Rain gauge↗
DOE OSTI2023

Thermodynamics of Minerals Stable near Earth's Surface

Project “Thermodynamics of Minerals Stable Near the Earth’s Surface” uses specialized calorimetric techniques to obtain new thermochemical data for solid phases of interest in the Earth’s “critical zone”, the near surface regions of the planet most directly affecting and affected by human activity. Major activity was in three areas: manganese oxide materials, aluminum clusters which are precursors to aluminum oxyhydroxide precipitates, and zeolites. All these classes of minerals are potential carriers of heavy metals and radionuclides in the environment, both within their crystal structures and as adsorbed layers or colloids. Their thermodynamic stability, as well as the sequence of stability of competing phases, governs the aqueous solubility of contaminants (and nutrients) in soil, groundwater, and sediments. The thermodynamics of these phases is strongly affected by particle size and crystallinity, since they often occur as very fine particles which do not coarsen in the near-surface environment. Many of these materials exhibit extensive polymorphism, multicomponent solid solution, and variable hydration states. Thus, one must define and systematize important thermodynamic variables, since one cannot make measurements on each and every possible phase, particle size, and composition. A major finding of the work on manganese oxides was labile water-induced oxidation-reduction reactions. These will be studied further by a combination of thermodynamic and synchrotron-based spectroscopic methods, the latter in collaboration with Peggy O’Day at UC Merced. The adsorption of other species, including simple organics, on such redox-active surfaces will also be investigated by a combination of thermochemical and spectroscopic studies. Studies of the energetics of water adsorption on mineral surfaces will be expanded to emphasize the adsorption of CO2 and small organic molecules, relevant to soil, groundwater, and the subsurface environment. Gas adsorption calorimetry, immersion calorimetry, and solution calorimetry will be combined with appropriate analytical and spectroscopic techniques to obtain a comprehensive picture of the interactions and their energetics. The evolution of aqueous aluminum clusters to form aluminum oxyhydroxide precipitates will be studied in detail by a combination of calorimetric and structural methods applied to aqueous samples aged at room temperature. The energetics of new classes of clusters will be explored. The project addresses several common themes relevant to the broad mission of the Department of Energy. Thermochemical data for minerals stable near the Earth’s surface, though still incomplete, are essential for understanding both natural and anthropogenic processes that affect our very existence on this planet. Such data contribute to the fundamental underpinning for mitigation and management strategies for the extraction and use of energy. Fundamental thermodynamic and mechanistic understanding is required to model processes ranging from heavy metal pollution to nuclear waste disposal to climate change.

58 GEOSCIENCES↗
NASA NTRS2003

Statistical Distribution of Inflation on Lava Flows: Analysis of Flow Surfaces on Earth and Mars

The surface morphology of a lava flow results from processes that take place during the emplacement of the flow. Certain types of features, such as tumuli, lava rises and lava rise pits, are indicators of flow inflation or endogenous growth of a lava flow. Tumuli in particular have been identified as possible indicators of tube location, indicating that their distribution on the surface of a lava flow is a junction of the internal pathways of lava present during flow emplacement. However, the distribution of tumuli on lava flows has not been examined in a statistically thorough manner. In order to more rigorously examine the distribution of tumuli on a lava flow, we examined a discrete flow lobe with numerous lava rises and tumuli on the 1969 - 1974 Mauna Ulu flow at Kilauea, Hawaii. The lobe is located in the distal portion of the flow below Holei Pali, which is characterized by hummocky pahoehoe flows emplaced from tubes. We chose this flow due to its discrete nature allowing complete mapping of surface morphologies, well-defined boundaries, well-constrained emplacement parameters, and known flow thicknesses. In addition, tube locations for this Mauna Ulu flow were mapped by Holcomb (1976) during flow emplacement. We also examine the distribution of tumuli on the distal portion of the hummocky Thrainsskjoldur flow field provided by Rossi and Gudmundsson (1996). Analysis of the Mauna Ulu and Thrainsskjoldur flow lobes and the availability of high-resolution MOC images motivated us to look for possible tumuli-dominated flow lobes on the surface of Mars. We identified a MOC image of a lava flow south of Elysium Mons with features morphologically similar to tumuli. The flow is characterized by raised elliptical to circular mounds, some with axial cracks, that are similar in size to the tumuli measured on Earth. One potential avenue of determining whether they are tumuli is to look at the spatial distribution to see if any patterns similar to those of tumuli-dominated terrestrial flows can be identified. Since tumuli form by the injection of lava beneath a crust, the distribution of tumuli on a flow should represent the distribution of thermally preferred pathways beneath the surface of the crust. That distribution of thermally preferred pathways may be a function of the evolution of a basaltic lava flow. As a longer-lived flow evolves, initially broad thermally preferred pathways would evolve to narrower, more well-defined tube-like pathways. The final flow morphology clearly preserves the growth of the flow over time, with inflation features indicating pathways that were not necessarily contemporaneously active. Here, we test using statistical analysis whether this final flow morphology produces distinct distributions that can be used to readily determine the distribution of thermally preferred pathways beneath the surface of the crust.

Glazel, L. S.↗
NASA NTRS1994

Global shortwave energy budget at the earth's surface from ERBE observations

A method is proposed to compute the net solar (shortwave) irradiance at the earth's surface from Earth Radiation Budget Experiment (ERBE) data in the S4 format. The S4 data are monthly averaged broadband planetary albedo collected at selected times during the day. Net surface shortwave irradiance is obtained from the shortwave irradiance incident at the top of the atmosphere (known) by subtracting both the shortwave energy flux reflected by the earth-atmosphere system (measured) and the energy flux absorbed by the atmosphere (modeled). Precalculated atmospheric- and surface-dependent functions that characterize scattering and absorption in the atmosphere are used, which makes the method easily applicable and computationally efficient. Four surface types are distinguished, namely, ocean, vegetation, desert, and snow/ice. Over the tropical Pacific Ocean, the estimates based on ERBE data compare well with those obtained from International Satellite Cloud Climatology Project (ISCCP) B3 data. For the 9 months analyzed the linear correlation coefficient and the standard difference between the two datasets are 0.95 and 14 W/sq m (about 6% of the average shortwave irradiance), respectively, and the bias is 15 W/sq m (higher ERBE values). The bias, a strong function of ISCCP satellite viewing zenith angle, is mostly in the ISCCP-based estimates. Over snow/ice, vegetation, and desert no comparison is made with other satellite-based estimates, but theoretical calculations using the discrete ordinate method suggest that over highly reflective surfaces (snow/ice, desert) the model, which accounts crudely for multiple reflection between the surface and clouds, may substantially overestimate the absorbed solar energy flux at the surface, especially when clouds are optically thick. The monthly surface shortwave irradiance fields produced for 1986 exhibit the main features characteristic of the earth's climate. As found in other studies, our values are generally higher than Esbensen and Kushnir's by as much as 80 W/sq m in the tropical oceans. A cloud parameter, defined as the difference between clear-sky and actual irradiances normalized to top-of-atmosphere clear-sky irradiance, is also examined. This parameter, minimally affected by sun zenith angle, is higher in the midlatitude regions of storm tracks than in the intertropical convergence zone (ITCZ), suggesting that, on average, the higher cloud coverage in midlatitudes is more effective at reducing surface shortwave irradiance than opaque, convective, yet sparser clouds in the ITCZ. Surface albedo estimates are realistic, generally not exceeding 0.06 in the ocean, as high as 0.9 in polar regions, and reaching 0.5 in the Sahara and Arabian deserts.

Breon, Francois-Marie↗
NASA NTRS2002

Remote Sensing in Geography in the New Millennium: Prospects, Challenges and Opportunities

As noted in the first edition of Geography in America, the term remote sensing was coined in the early 1960's by geographers to describe the process of obtaining data by use of both photographic and nonphotographic instruments. Although this is still a working definition today, a more explicit and updated definition as it relates to geography can be phrased as: "remote sensing is the science, art, and technology of identifying, characterizing, measuring, and mapping of Earth surface, and near earth surface, phenomena from some position above using photographic or nonphotographic instruments." Both patterns and processes may be the object of investigation using remote sensing data. The science dimension of geographic remote sensing is rooted in the fact that: a) it is dealing with primary data, wherein the investigator must have an understanding of the environmental phenomena under scrutiny, and b) the investigator must understand something of the physics of the energy involved in the sensing instrument and the atmospheric pathway through which the energy passes from the energy source, to the Earth object to the sensor.

Quattrochi, Dale A.↗
NASA NTRS1982

Measurement of solar radiation at the Earth's surface

The characteristics of solar energy arriving at the surface of the Earth are defined and the history of solar measurements in the United States presented. Radiation and meteorological measurements being made at solar energy meteorological research and training sites and calibration procedures used there are outlined. Data illustrating the annual variation in daily solar radiation at Ann Arbor, Michigan and the diurnal variation in radiation at Albuquerque, New Mexico are presented. Direct normal solar radiation received at Albuquerque is contrasted with that received at Maynard, Massachusetts. Average measured global radiation for a period of one year for four locations under clear skies, 50% cloud cover, and 100% cloud cover is given and compared with the solar radiation at the top of the atmosphere. The May distribution of mean daily direct solar radiation and mean daily global solar radiation over the United States is presented. The effects of turbidity on the direct and circumsolar radiation are shown.

Bartman, F. L.↗
NASA NTRS1984

Soil moisture from temperature measurements at the Earth's surface, update

Soil moisture budgets at the Earth's surface were investigated based on soil and atmospheric temperature variations. A number of data sets were plotted and statistically analyzed in order to accentuate the existence and the characteristics of mesoscale soil temperature extrema variations and their relations to other parameters. The correlations between diurnal temperature extrema for air and soil in drought and non-drought periods appear to follow different characteristic patterns, allowing an inference of soil moisture content from temperature data. The recovery of temperature extrema after a precipitation event also follows a characteristic power curve rise between two limiting values which is an indicator of evaporation rates. If these indicators are applied universally to regional temperature data, soil moisture content or drought conditions can be inferred directly from temperature measurements.

Welker, J. E.↗
NASA NTRS2004

Topography of the Flattest Surface on Earth: using ICESAT, GPS, and MISR to Measure Salt Surface Topography on Salar de Uyuni, Bolivia

Salt flats are aptly named: they are composed largely of salt, and are maintained as nearly equipotential surfaces via frequent flooding. The salar de Uyuni, on the Altiplano in southwestern Bolivia, is the largest salt flat on Earth, with an area of 9,800 sq km. Except for a few bedrock islands, it has less than 40 cm of relief. The upper-most salt unit averages 5 m thick and contains 50 cu km of nearly pure halite. It includes most of the salt that was in solution in paleolake Minchin, which attained a maximum area of 60,000 sq km and a maximum depth of 150 m, roughly 15 kyr ago. Despite approx. 10 m of differential isostatic rebound since deposition, the salar surface has been actively maintained as an extraordinarily flat and smooth surface by annual flooding during the rainy season. We have used the strong optical absorption properties of water in the visible band to map spatial variations in water depth during a time when the salar was flooded. As water depth increases, the initially pure white surface appears both darker and bluer. We utilized MISR images taken during the interval from April to November 2001. The red and infra-red bands (672 and 867 nm wavelength) were most useful since the water depth is small and the absorption at those wavelengths is quite strong. Nadir pointed MISR images have 275 m spatial resolution. To aid in our evaluation of water depth variations over the saiar surface, we utilized two sources of direct topographic measurements: several ICESAT altimetry tracks cross the area, and a 40x50 km GPS grid was surveyed to calibrate ICESAT. A difficulty in using these data types is that both give salt surface elevations relative to the ellipsoid, whereas the water surface will, in the absence of wind or tidal disturbances, follow an equipotential surface. Geoid height is not known to the required accuracy of a few cm in the central Andes. As a result, before comparing optical absorption from MISR to salt surface topography from GPS or ICESAT, we removed the longest wavelengths from both.

Comstock, Robert L.↗
NASA NTRS1976

Average latitudinal variation in ultraviolet radiation at the earth's surface

Tabulated values are presented for ultraviolet radiation at the earth's surface as a function of wavelength, latitude, and season, for clear sky and seasonally and latitudinally averaged ozone amounts. These tabulations can be combined with any biological sensitivity function in order to obtain the seasonal and latitudinal variation of the corresponding effective doses. The integrated dosages, based on the erythemal sensitivity curve and on the Robertson-Berger sunburn-meter sensitivity curve, have also been calculated, and these are found to vary with latitude and season in very nearly the same way as 307 and 314 nm radiation, respectively.

Johnson, F. S.↗
NASA NTRS1984

Atmospheric Effects on Remote Sensing of the Earth's Surface

The main causes and magnitude of the atmospheric effects on remote sensing of the Earth's surface are determined. Theoretical study as well as measurements are included. The knowledge gained from this study will be used to develop atmospheric correction algorithms and to test them with satellite data. In a theoretical investigation of the relative effects of the aerosol optical thickness, absorption, and size distribution on remote sensing, it was found that aerosol absorption has a significant effect on satellite measurements of surface reflectivity. The absorption effect is stronger for high than for low surface reflectances. The aerosol optical thickness is dominant for small surface reflectances. The accuracy of clustering algorithms depends on both parameters. The vegetation index, however, is affected by the optical thickness but only weakly affected by the absorption. A laboratory simulation of the atmospheric effect on the radiance of sunlight scattered from the Earth's surface-atmosphere system was performed. This experiment verified the existence of the adjacency effect (the effect of a bright field on the radiance detected above a dark field) and was used to test 3-D radiative transfer models. In a theoretical study it was found that atmospheric scattering resulting from the adjacency effect reduces the separability between surface classes.

Fraser, R. E.↗
NASA NTRS1977

A simple thermal model of the earth's surface for geologic mapping by remote sensing

Thermal inertia of the earth's surface can be used in geologic mapping as a complement to surface reflectance data as provided by Landsat. Thermal inertia cannot be determined directly but must be inferred from radiation temperature measurements (by thermal IR sensors) made at various times in the diurnal cycle, combined with a model of the surface heating processes. A model is developed which differs from those created previously for this purpose, because it includes sensible and latent heating. Tests of this model using field data indicate that it accurately determines the surface heating. When the model is used with field measurements of meteorological variables and is combined with remotely sensed temperature data, a thermal inertia image can be produced.

Kahle, A. B.↗