Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRON REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Structured electrolytes facilitate Grotthuss-type transport for enhanced proton-coupled electron transfer reactions

Concentrated hydrogen-bonded electrolytes (CoHBEs) are structured, electrochemically stable, less-volatile alternatives to aqueous and dilute nonaqueous electrolytes, however, with high viscosities that limit molecular diffusion. This work provides an understanding of the proton conduction mechanism in CoHBEs based on mixtures of acids and azoles and establishes a link between the structurally dictated transport properties and the proton-coupled electron transfer (PCET) reaction rates that can be leveraged for enhancing electrochemical reactions. Diffusion and relaxation NMR studies suggest a breaking of the viscosity–conductivity tradeoff, where at high azole concentrations (>45 mol%), Grotthuss transport is more likely with lowered proton transfer energy barriers between the azole and the acid according to the machine learning (ML) accelerated ab initio path integral MD (AI-PIMD) simulations. Proton conduction pathways are found to be switchable between the hydrogen bonding networks of the acid and the azole, with imidazole chain forming structures better facilitating Grotthuss hopping. Supported by small-angle neutron scattering studies, the chains are found to have six member molecules on average with maximum of 3 to 4 imidazole/imidazoliums at 50 to 60 mol%. Despite their high viscosities, the measured PCET rates for quinones and phenazines measured in the protic CoHBEs present relatively high electron transfer rate constants (k 0 ~ 10 −4 cm/s), validated by rotating disc electrode and scanning electrochemical microscopy measurements. The results demonstrate that strategic tuning of hydrogen-bond donor–acceptor interactions enables the decoupling of proton transport and viscosity, thereby impacting PCET reactions.

electrokinetics↗

Bioinspiration in light harvesting and catalysis

Capturing and converting solar energy into fuels and feedstocks is a global challenge that spans numerous disciplines and fields of research. Billions of years of evolution have allowed natural organisms to hone strategies for harvesting light from the sun and storing energy in the form of carbon–carbon and carbon–hydrogen bonds. Photosynthetic antenna proteins capture solar photons and funnel photoexcitations to reaction centres with high yields, and enzymes catalyze multi-electron reactions, facilitating chemical transformations not yet efficiently implemented using artificially engineered catalysts. Researchers in renewable energy often look to nature to understand the mechanisms at work and, if possible, to explore their translation into artificial systems. Here, we review advances in bioinspiration across the fields of biological light harvesting and chemical energy conversion. We examine how multi-photon and multi-electron reactions in biology can inspire new methods in photoredox chemistry to achieve novel, selective and complex organic transformations; how carbonic-dehydrogenase-inspired design principles enable catalytic reactions such as the conversion of CO 2 into useful products such as fuels; and how concepts from photosynthetic antenna complexes and reaction centres can benefit artificial light-harvesting materials. We then consider areas in which bioinspiration could enable advances in the rational design of molecules and materials, the expansion of the synthetic capabilities of catalysts and the valorization of molecular building blocks. Here, we highlight the challenges that must be overcome to realize these advances and propose new directions that may use bioinspiration to achieve them.

36 MATERIALS SCIENCE↗

Theoretical Studies of Chemical Reactions following Electronic Excitation

The use of multi-configurational wave functions is demonstrated for several processes: tautomerization reactions in the ground and excited states of the DNA base adenine, dissociation of glycine molecule after electronic excitation, and decomposition/deformation of novel rare gas molecules HRgF. These processes involve bond brealung/formation and require multi-configurational approaches that include dynamic correlation.

Chaban, Galina M.↗

Determination of Vibrational Motions Driving Photoinduced Electron Transfer Reactions in Molecular Crystals and Organic Thin Films

The objective of this research is to develop an understanding of how nuclear motions can be used to drive and control photo-induced charge transfer and singlet fission reactions in molecular crystals and thin films. By following the structural evolution of reacting molecules and nanostructures on the timescale of their nuclear motion, we will determine what interplay of nuclear coordinates is most efficient in driving electron transfers, a necessary first step in most photovoltaic and photocatalytic processes. We will identify which nuclear coordinates effectively promote desirable electron transfer processes, or ineffectively dissipate photon energy into unwanted thermal energy, thus guiding the design and implementation of molecular systems tailored for high efficiency processes. Specifically, we aim to identify which nuclear coordinates are responsible for driving electron transfer and singlet fission reactions at different points along the reaction coordinate, particularly in regimes which deviate from Marcus theory predictions. We will do so by investigating systems with electron transfer and singlet fission occurring from non-thermalized states due to strong donor-acceptor electronic coupling. First, we will prove that specific vibrational modes are responsible for charge transfer processes in molecular crystals. Secondly, we will investigate how vibrational coherences and specific nuclear motions can be used to drive high yield singlet fission processes. Finally, we will determine how complex film morphology affects long-range charge transport, a key limiting factor in our ability to make gains in efficiency.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron-Stimulated Reactions and O-2 Production in Methanol-Covered Amorphous Solid Water Films

The low-energy, electron-stimulated desorption (ESD) of molecular products from amorphous solid water (ASW) films capped with methanol is investigated versus methanol coverage (0 - 4 x 1015 cm-2) at 50 K using 100 eV incident electrons. The major ESD products from a monolayer of methanol on ASW are quite similar to the ESD products from bulk methanol film: H2, CH4, H2O, C2H6, CO, CH2O, and CH3OH. For 40 ML ASW films, the molecular oxygen, hydrogen, and water ESD yields from the ASW are suppressed with increasing methanol coverage, while the CH3OH ESD yield increases proportionally to the methanol coverage. The suppression of the water ESD products by methanol is consistent with the non-thermal reactions occurring preferentially at or near the ASW/vacuum interface and not in the interior of the film. The water and molecular hydrogen ESD yields from the water layer decrease exponentially with the methanol cap coverage with 1/e constants of ~ 0.6 x 1015 cm-2 and 1.6 x 1015 cm-2, respectively. In contrast, the O2 ESD from the water layer is very efficiently quenched by small amounts of methanol (1/e ~ 6.5 x 1013 cm-2). The rapid suppression of O2 production by small amounts of methanol is due to reactions between CH3OH and the precursors for the O2 - mainly OH radicals. A kinetic model for the O2 ESD which semi-quantitatively accounts for the observations is presented.

08 HYDROGEN↗

Using molten salts to probe outer-coordination sphere effects on lanthanide( III )/( II ) electron-transfer reactions

Controlling structure and reactivity by manipulating the outer-coordination sphere around a given reagent represents a longstanding challenge in chemistry. Despite advances toward solving this problem, it remains difficult to experimentally interrogate and characterize outer-coordination sphere impact. Here, this work describes an alternative approach that quantifies outer-coordination sphere effects. It shows how molten salt metal chlorides (MCl n ; M = K, Na, n = 1; M = Ca, n = 2) provided excellent platforms for experimentally characterizing the influence of the outer-coordination sphere cations (M n+ ) on redox reactions accessible to lanthanide ions; Ln 3+ + e 1– → Ln 2+ (Ln = Eu, Yb, Sm; e 1– = electron). As a representative example, X-ray absorption spectroscopy and cyclic voltammetry results showed that Eu 2+ instantaneously formed when Eu 3+ dissolved in molten chloride salts that had strongly polarizing cations (like Ca 2+ from CaCl 2 ) via the Eu 3+ + Cl 1– → Eu 2+ + ½Cl 2 reaction. Conversely, molten salts with less polarizing outer-sphere M 1+ cations (e.g., K 1+ in KCl) stabilized Ln 3+ . For instance, the Eu 3+ /Eu 2+ reduction potential was >0.5 V more positive in CaCl 2 than in KCl. In accordance with first-principle molecular dynamics (FPMD) simulations, we postulated that hard M n+ cations (high polarization power) inductively removed electron density from Ln n+ across Ln–Cl···M n+ networks and stabilized electron-rich and low oxidation state Ln 2+ ions. Conversely, less polarizing M n+ cations (like K 1+ ) left electron density on Lnn+ and stabilized electron-deficient and high-oxidation state Ln 3+ ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of electron transfer reactions in the presence of mode mixing: Comparison of a generalized master equation approach with the numerically exact simulation

A generalized master equation approach is developed to describe electron transfer (ET) dynamics in the presence of mode mixing. Results from this approximate approach are compared to the numerically exact simulations using the multilayer multiconfiguration time-dependent Hartree theory. The generalized master equation approach is found to work well for nonadiabatic resonant ET. Depending on the specific situation, it is found that the introduction of mode mixing may either increase or decrease the ET time scale. The master equation fails in the adiabatic ET regime, where the introduction of mode mixing may lead to electron trapping. From both the approximate theory and the numerically exact simulation it is shown how neglecting mode mixing in practical calculations may lead to inaccurate predictions of the ET dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning

Self-assembled monolayers (SAMs) help improve the performance of organic electronic devices through interface passivation and enhanced carrier transport. Yet, there is limited information regarding the chemical structure of the SAMs upon functionalization and subsequent thermal treatment. Here, we studied the on-surface reaction of carbazole-derived SAMs on model gold electrodes, focusing on the chemical structure changes induced by thermal treatments. Furthermore, we correlate the microscopic changes with their impact on the electrode’s work function. The carbazole-based SAMs first transform into organometallic complexes. At higher annealing temperatures, SAMs convert to oligomeric complexes. The observed chemical reactions significantly reduce the electrode work function and facilitate electron injection in n-type organic thin-film transistors. Our results highlight the on-surface synthesis of electronically active SAMs as an alternative approach for modifying the work function of electrodes for organic electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of a Proteoliposome Model to Probe Transmembrane Electron-Transfer Reactions

The mineral respiring bacterium Shewanella oneidensis uses a protein complex, MtrCAB, composed of two decaheme cytochromes brought together inside a transmembrane porin to transport electrons across the outer membrane to a variety of mineral-based electron acceptors. A proteoliposome system has been developed that contains methyl viologen (MV) as an internalised electron acceptor and valinomycin (V) as a membrane associated cation exchanger. These proteoliposomes can be used as a model system to investigate MtrCAB function.

Environmental Molecular Sciences Laboratory↗

Photoreactivity of ZnO nanoparticles in visible light: Effect of surface states on electron transfer reaction

Wide band gap metal oxide semiconductors such as zinc oxide (ZnO) show visible band photolysis that has been employed, among others, to degrade harmful organic contaminants into harmless mineral acids. Metal oxides show enhanced photocatalytic activity with the increase in electronic defects in the crystallites. By introducing defects into the crystal lattice of ZnO nanoparticles, we observe a redshift in the optical absorption shifting from the ultraviolet region to the visible region (400-700 nm), which is due to the creation of intermediate defect states that inhibit the electron hole recombination process. The defects were introduced by fast nucleation and growth of the nanoparticles by rapid heating using microwave irradiation and subsequent quenching during the precipitation reaction. To elucidate the nature of the photodegradation process, picosecond resolved time correlated single photon count (TCSPC) spectroscopy was carried out to record the electronic transitions resulting from the de-excitation of the electrons to their stable states. Photodegradation and TCSPC studies showed that defect engineered ZnO nanoparticles obtained through fast crystallization during growth lead to a faster initial degradation rate of methylene blue as compared to the conventionally synthesized nanoparticles.

36 MATERIALS SCIENCE↗

Reaction and electronic excitation in crossed-beams collisions of low-energy O(3P) atoms with H2O and CO2

Collisions of low-energy (5-20 eV), ground-state oxygen atoms with H2O and CO2 in a crossed-beams geometry lead to chemical reaction in the case of H2O to produce OH (A2Sigma+ - X2Pi) emissions; and to inelastic electronic excitation in the case of CO2 to produce CO2 flame bands. Species identifications are made through known wavelengths and emission intensities in the range 300-400 nm. The measured difference in threshold energies for the two processes confirm the channels involved. These are the first measurements in this energy range of optical emissions through collisions of fast neutral species.

Orient, O. J.↗

Direct Demonstration of Unified Brønsted-Evans-Polanyi Relationships for Proton-Coupled Electron Transfer Reactions on Transition Metal Surfaces

Brønsted-Evans-Polanyi (BEP) relationships, which relate elementary reaction barriers to reaction thermodynamics, have long been discussed in electrochemical science, but demonstration of their existence in heterogeneous electrocatalysis, across many different catalyst surfaces and voltages, is lacking. In this contribution, the BEP model is demonstrated to describe both multiple catalyst surfaces and variable voltages in electrochemical environments. For proton-coupled electron transfer (PCET) to surface nitrogen (N*) and nitric oxide (NO*), reaction energies and activation barriers are calculated using Density Functional Theory (DFT) on a parallel plate capacitor model at three different potentials and for nine different transition metal surfaces. Linear BEP relations that describe all potentials and catalyst surfaces are obtained for these elementary reactions, and the slopes of the correlations are shown to be directly related to the fractional coordinate of the transition states (FCTS) of the reactions. The results, which are explained in terms of Marcus Theory, prove a direct equivalence between unified BEP coefficients, describing both variable catalyst surfaces and voltages, and electrochemical symmetry factors and provide a straightforward means of estimating this quantify for PCET reactions on transition metal surfaces. The resulting relationships, in turn, could lead to predictions of electrocatalytic reactivity trends of enhanced accuracy and efficiency.

Electrochemistry↗

Revisiting Understanding of Electrochemical CO 2 Reduction on Cu(111): Competing Proton-Coupled Electron Transfer Reaction Mechanisms Revealed by Embedded Correlated Wavefunction Theory

Copper (Cu) electrodes, as the most efficacious of CO 2 reduction reaction (CO 2 RR) electrocatalysts, serve as prototypes for determining and validating reaction mechanisms associated with electrochemical CO 2 reduction to hydrocarbons. As in situ electrochemical mechanism determination by experiments is still out of reach, such mechanistic analysis typically is conducted using density functional theory (DFT). The semilocal exchange-correlation (XC) approximations most often used to model such catalysis unfortunately engender a basic error: predicting the wrong adsorption site for CO (a key CO 2 RR intermediate) on the most ubiquitous facet of Cu, namely, Cu(111). This longstanding inconsistency casts lingering doubt on previous DFT predictions of the attendant CO 2 RR kinetics. Here, we apply embedded correlated wavefunction (ECW) theory, which corrects XC functional error, to study the CO 2 RR on Cu(111) via both surface hydride (*H) transfer and proton-coupled electron transfer (PCET). We predict that adsorbed CO (*CO) reduces almost equally to two intermediates, namely, hydroxymethylidyne (*COH) and formyl (*CHO) at –0.9 V vs the RHE. In contrast, semilocal DFT approximations predict a strong preference for *COH. With increasing applied potential, the dominance of *COH (formed via potential-independent surface *H transfer) diminishes, switching to the competitive formation of both *CHO and *COH (both formed via potential-dependent PCET). Furthermore, our results also demonstrate the importance of including explicitly modeled solvent molecules in predicting electron-transfer barriers and reveal the pitfalls of overreliance on simple surface *H transfer models of reduction reactions.

30 DIRECT ENERGY CONVERSION↗

Sigma bond activation of deuterium mediated by atomic cerium cations: Experiment and theory

Reaction of ground-state Ce + (5d 2 4f 1 ) with deuterium in a reaction cell at a pressure of 1.5–4.0 Torr and temperatures ranging from approximately 265–515 K is studied. Rate constants for formation of CeD 2 + are acquired and vary from approximately 2.8 × 10 -14 to 2.1 ×10 -13 cm 3 /s. A negative temperature dependence is observed for the measured rate constants, indicating the reaction becomes less efficient as the temperature increases, consistent with an exothermic reaction. Electronic structure calculations were performed using density functional theory (DFT) at the PBE0 level to characterize all reactant and product species as well as to generate potential energy surfaces (PESs) for the insertion reaction. This combination of experimental and theoretical results suggest that Ce + inserts into the deuterium sigma bond in an overall exothermic and barrierless process.

74 ATOMIC AND MOLECULAR PHYSICS↗

Investigations into Spin- and Unpolarized Secondary Electron-Induced Reactions in Self-Assembled Monolayers of Cysteine

Cysteine is the simplest thiolated, chiral amino acid and is often used as the anchor for studies of self-assembled monolayers (SAMs) of complex biomolecules such as peptides. Understanding the interaction of SAMs of cysteine with low-energy secondary electrons (SEs) produced by X-rays can further our understanding of radiation damage in biomolecules. In particular, if the electrons are polarized, chiral-selective chemistry could have bearing on the origin of homochirality in nature. In the present paper, we use synchrotron radiation-based X-ray photoelectron spectroscopy to determine the changes that occur in the bonding of self-assembled layers of cysteine on gold as a result of soft X-ray irradiation. To investigate the possibility of chiral selectivity resulting from the interaction of low-energy, spin-polarized SEs (SPSEs), measurements were conducted on cysteine adsorbed on a 3 nm-thick gold layer deposited on a CoPt thin-film multilayer with perpendicular magnetic anisotropy. Time-dependent measurements of the C 1s, N 1s, O 1s, S 2p, and Au 4f core levels are used to follow the changes in surface chemistry and determine reaction cross-sections as a function of SE exposure. Analysis of the data results in cross-sections in the range of 5-7 Mb and suggests possible reaction pathways. Changing the magnetization direction of the CoPt multilayer produces SPSEs with opposite polarity. Some evidence of spin-dependent reactions is indicated but is inconclusive. Possible reasons for the discrepancy are posited.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Use of Hydrogel Electrolyte in Zn-MnO2 Rechargeable Batteries: Characterization of Safety, Performance, and Cu2+ Ion Diffusion

Achieving commercially acceptable Zn-MnO2 rechargeable batteries depends on the reversibility of active zinc and manganese materials, and avoiding side reactions during the second electron reaction of MnO2. Typically, liquid electrolytes such as potassium hydroxide (KOH) are used for Zn-MnO2 rechargeable batteries. However, it is known that using liquid electrolytes causes the formation of electrochemically inactive materials, such as precipitation Mn3O4 or ZnMn2O4 resulting from the uncontrollable reaction of Mn3+ dissolved species with zincate ions. In this paper, hydrogel electrolytes are tested for MnO2 electrodes undergoing two-electron cycling. Improved cell safety is achieved because the hydrogel electrolyte is non-spillable, according to standards from the US Department of Transportation (DOT). The cycling of “half cells” with advanced-formulation MnO2 cathodes paired with commercial NiOOH electrodes is tested with hydrogel and a normal electrolyte, to detect changes to the zincate crossover and reaction from anode to cathode. These half cells achieved ≥700 cycles with 99% coulombic efficiency and 63% energy efficiency at C/3 rates based on the second electron capacity of MnO2. Other cycling tests with “full cells” of Zn anodes with the same MnO2 cathodes achieved ~300 cycles until reaching 50% capacity fade, a comparable performance to cells using liquid electrolyte. Electrodes dissected after cycling showed that the liquid electrolyte allowed Cu ions to migrate more than the hydrogel electrolyte. However, measurements of the Cu diffusion coefficient showed no difference between liquid and gel electrolytes; thus, it was hypothesized that the gel electrolytes reduced the occurrence of Cu short circuits by either (a) reducing electrode physical contact to the separator or (b) reducing electro-convective electrolyte transport that may be as important as diffusive transport.

25 ENERGY STORAGE↗