Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRON C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

An Innovative Very Low Thermal Power Waste Heat Recovery System for Thermal Control of Deep Space Missions: A Thermal Flask in Space

Future missions to deep space, such as those to the outer planets (Jupiter, Saturn, etc.), which would rely on solar photovoltaic power, would need extremely large solar arrays to produce sufficient power for their operations because solar intensity is so low at those locations. Hence any additional power that would be needed for thermal control is extremely limited. Previous deep space missions like Juno (to Jupiter) required almost 200 W of electrical power for thermal control. This is prohibitively large for many future mission concepts, and leads to them needing very large solar arrays. For Saturn, where the solar flux is 1/4th the flux at Jupiter, this would entail an extremely large increase in the solar array size to accommodate the need for thermal survival power, which would be prohibitively large in size and mass, and very expensive. Hence there is a need to come up with a thermal architecture and design options that would not need such prohibitively large thermal power levels. One solution relies on harvesting the pre-existing waste heat from all the heat dissipation that would be present from operation of electronics, instruments, etc. for their own functionality. For example, for a generic Saturn mission, the various electronics would already dissipate about 200 Watts of heat that is simply "thrown away" to space from the spacecraft surfaces. The amount of thermal power that would be required for the safe thermal control of components within the spacecraft in deep space would be roughly of this magnitude for this class of spacecraft. So it makes good sense to try to harvest the waste heat and employ it to maintain the temperatures of all the components within their allowable limits. In particular, propulsion systems typically need to be kept above their freezing limits, around room temperature (15 C). Electronics needs to be kept typically above -40 C and batteries above -20 C. The next question becomes how to harvest this waste heat and direct it to the components that would need it for their survival. The proposed system utilizes a mechanically pumped, single phase fluid loop to pick up the waste heat from components attached to this loop's tubing and then directed to a thermal flask that has tubing attached to it. The thermal flask is cylindrically shaped and contains essentially all systems and components in the spacecraft within it, with the exception of the solar array, antennae, thrusters and various apertures of instruments, etc. to allow them an unobstructed view of space. Waste heat from the heat-dissipating components warms up the fluid and is carried to the flask surface and deposited on it via the fluid loop's flow. The entire flask is covered with Multi-Layered Insulation (MLI) to minimize the heat loss from the flask and allow it to remain warm. Hence the flask essentially creates a thermal environment within which the spacecraft components reside. The temperature of the components within the flask is then essentially the same as the temperature of the flask. This approach could be a very enabling feature for deep space missions. This paper describes the approach utilized for this thermal architecture, along with its mechanical and implementation aspects. Additionally it will compare and contrast this approach with the more conventional solutions utilized earlier.

Bhandari, Pradeep↗

Evolution of the electronic structure of C{sub 60}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} interface

The evolution of the electronic structure at the interface between fullerene (C{sub 60}) and La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO) has been investigated with ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. There is a 0.61 eV barrier for the electrons to be injected from LSMO to C{sub 60}. The energy bands keep bending upward with increasing C{sub 60} thickness. A total energy bending of 0.72 eV is observed, changing the C{sub 60} film from n-type to p-type. The n-p transition is ascribed to the diffusion of oxygen from LSMO to C{sub 60} which subsequently strips electrons from C{sub 60}, making the latter p-type. Our results suggest a buffer layer be inserted between the LSMO and C{sub 60} to lower the interface electron barrier and prevent deterioration of the C{sub 60} film in related spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A redox beginning: Which came first phosphoryl, acyl, or electron transfer ?

Thermodynamic and kinetic information available on the synthesis of prebiotic monomers and polymers will be examined in order to illuminate the prebiotic plausibility of polymer syntheses based on (a) phosphoryl transfer that yields phosphodiester polymers, (b) acyl transfer that gives polyamides, and (c) electron transfer that produces polydisulfide or poly(thio)ester polymers. New experimental results on the oxidative polymerization of 2,3-dimercaptopropanol by ferric ions on the surface of ferric hydroxide oxide will be discussed as a chemical model of polymerization by electron transfer. This redox polymerization that yields polymers with a polydisulfide backbone was found to give oligomers up to the 15-mer from 1 mM of 2,3-dimercaptopropanol after one day at 25 C. High pressure liquid chromatography (HPLC) analysis of the oligomers was carried out on an Alltech OH-100 column eluted with acetonitrile-water.

Weber, Arthur L.↗

Superconductivity: The persistence of pairs

Superconductivity stems from a weak attraction between electrons that causes them to form bound pairs and behave much like bosons. These so-called Cooper pairs are phase coherent, which leads to the astonishing properties of zero electrical resistance and magnetic flux expulsion typical of superconducting materials. This coherent state may be qualitatively understood within the Bose–Einstein condensate (BEC) model, which predicts that a gas of interacting bosons will become unstable below a critical temperature and condense into a phase of matter with a macroscopic, coherent population in the lowest energy state, as happens in 4 He or cold atomic gases. The successful theory proposed by Bardeen, Cooper and Schrieffer (BCS) predicts that at the superconducting transition temperature T c , electrons simultaneously form pairs and condense, with no sign of pairing above T c . Theorists have long surmised that the BCS and BEC models are opposite limits of a single theory and that strong interactions or low density can, in principle, drive the system to a paired state at a temperature Tpair higher than T c , making the transition to the superconducting state BEC-like (Fig. 1). Yet most superconductors to date are reasonably well described by BCS theory or its extensions, and there has been scant evidence in electronic materials for the existence of pairing independent of the full superconducting state (though an active debate rages over the cuprate superconductors). Writing in Nature, Jeremy Levy and colleagues have now used ingenious nanostructured devices to provide evidence for electron pairing1. Perhaps surprisingly, the material they have studied is a venerable, yet enigmatic, low-temperature superconductor, SrTiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Temperature Capacitive Pressure Sensor Employing a SiC Based Ring Oscillator

In an effort to develop harsh environment electronic and sensor technologies for aircraft engine safety and monitoring, we have used capacitive-based pressure sensors to shift the frequency of a SiC-electronics-based oscillator to produce a pressure-indicating signal that can be readily transmitted, e.g. wirelessly, to a receiver located in a more benign environment. Our efforts target 500 C, a temperature well above normal operating conditions of commercial circuits but within areas of interest in aerospace engines, deep mining applications and for future missions to the Venus atmosphere. This paper reports for the first time a ring oscillator circuit integrated with a capacitive pressure sensor, both operating at 500 C. This demonstration represents a significant step towards a wireless pressure sensor that can operate at 500 C and confirms the viability of 500 C electronic sensor systems.

Meredith, Roger D.↗

The Focusing DIRC with Waveform Digitizing Electronics

We have tested a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC) with waveform digitizing electronics. The prototype's concept is based on the BaBar DIRC with several important improvements: (a) much faster, pixelated photon detectors, (b) a mirror that makes the photon detector smaller and less sensitive to background in future applications, and (c) electronics capable of measuring single photon resolution to {sigma} {approx} 150 ps, which allows for correction due to chromatic error. In this test, the prototype has been instrumented with seven Hamamatsu H-8500 MaPMTs. Waveforms from {approx}450 pixels are digitized with waveform sampling electronics based on the BLAB2 ASIC, operating at a sampling speed of {approx}2.5 GSa/s. This version of the FDIRC prototype was tested in a large cosmic ray telescope providing muon tracks with {approx}1 mrad angular resolution and a muon momentum cutoff of {ge} 1.6 GeV/c.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electronics Demonstrated for Low- Temperature Operation

The operation of electronic systems at cryogenic temperatures is anticipated for many NASA spacecraft, such as planetary explorers and deep space probes. For example, an unheated interplanetary probe launched to explore the rings of Saturn would experience an average temperature near Saturn of about 183 C. Electronics capable of low-temperature operation in the harsh deep space environment also would help improve circuit performance, increase system efficiency, and reduce payload development and launch costs. An ongoing research and development program on low-temperature electronics at the NASA Glenn Research Center at Lewis Field is focusing on the design of efficient power systems that can survive and exploit the advantages of low-temperature environments. The targeted systems, which are mission driven, include converters, inverters, controls, digital circuits, and special-purpose circuits. Initial development efforts successfully demonstrated the low-temperature operation and cold-restart of several direct-current/direct-current (dc/dc) converters based on different types of circuit design, some with superconducting inductors. The table lists some of these dc/dc converters with their properties, and the photograph shows a high-voltage, high-power dc/dc converter designed for an ion propulsion system for low-temperature operation. The development efforts of advanced electronic systems and the supporting technologies for low-temperature operation are being carried out in-house and through collaboration with other Government agencies, industry, and academia. The Low Temperature Electronics Program supports missions and development programs at NASA s Jet Propulsion Laboratory and Goddard Space Flight Center. The developed technologies will be transferred to commercial end users for applications such as satellite infrared sensors and medical diagnostic equipment.

Patterson, Richard L.↗

Silicon nitride films deposited with an electron beam created plasma

The electron beam assisted chemical vapor deposition (EBCVD) of silicon nitride films using NH3, N2, and SiH4 as the reactant gases is reported. The films have been deposited on aluminum, SiO2, and polysilicon film substrates as well as on crystalline silicon substrates. The range of experimental conditions under which silicon nitrides have been deposited includes substrate temperatures from 50 to 400 C, electron beam currents of 2-40 mA, electron beam energies of 1-5 keV, total ambient pressures of 0.1-0.4 Torr, and NH3/SiH4 mass flow ratios of 1-80. The physical, electrical, and chemical properties of the EBCVD films are discussed.

Bishop, D. C.↗

Solid state microelectronics tolerant to radiation and high temperature

The 300 C electronics technology based on JFET thick film hybrids was tested up to 10 to the 9th power rad gamma (Si) and 10 to the 15th power neutrons/sq cm. Circuits and individual components from this technology all survived this total dose although some devices required 1 hour of annealing at 200 or 300 C to regain functionality. This technology used with real time annealing should function to levels greater than 10 to the 10th power rad gamma and 10 to the 16th power n/sq cm.

Draper, B. L.↗

Thermal annealing synthesis of titanium-dioxide nanowire-nanoparticle hetero-structures

Crystalline TiO{sub 2} nanowire-nanoparticle hetero-structures were successfully synthesized from titanium foils by using a simple thermal annealing method with the aid of CuCl{sub 2} at the atmospheric pressure. Nanowires were grown from Ti foils by simply annealing Ti foils at 850 {sup o}C. Then, TiCl{sub 4} was delivered to TiO{sub 2} nanowires so as to precipitate TiO{sub 2} nanoparticles on nanowire surfaces. At 750 {sup o}C reaction temperature, nanoparticles of tens of nanometers in diameter were well distributed on pre-grown nanowire forests. Nanoparticles were likely to be precipitated by TiCl{sub 4} decomposition or oxidation and that require high temperatures above {approx}650 {sup o}C. Electron microscopy, X-ray diffraction, and UV-vis spectroscopy analyses show they have the rutile polycrystalline structure with a slightly enlarged bandgap compared to that of bulk TiO{sub 2}. The influence of key synthesis parameters including reaction temperature, reaction time, and quantity of supplied materials on the incorporating nanoparticles was also systematically studied. The optimum reaction condition in the present paper was identified to be 750 {sup o}C annealing with repetitive 20 min reactions. A higher reaction temperature yielded larger diameter particles, and higher loading of Ti produced dense particles without changing the particle size. Finally, this method could be utilized for synthesizing other metal oxide nanowires-nanoparticle hetero-structures. - Graphical abstract: Schematic of proposed reaction mechanisms for synthesizing the hetero-structures: (a) TiO{sub 2} nanowires were grown as base structures for capturing TiCl{sub 4} gas. (b) TiCl{sub 4} gas was oxidized, precipitating crystalline TiO{sub 2} nanoparticles. (c) Repeated particle-incorporation process created tree-like hetero-structures.

36 MATERIALS SCIENCE↗

Edge multi-energy soft x-ray diagnostic in Experimental Advanced Superconducting Tokamak

A multi-energy soft x-ray (ME-SXR) diagnostic has been built for electron temperature profile in the edge plasma region in Experimental Advanced Superconducting Tokamak (EAST) after two rounds of campaigns. Originally, five preamplifiers were mounted inside the EAST vacuum vessel chamber attached to five vertically stacked compact diode arrays. A custom mechanical structure was designed to protect the detectors and electronics under constraints of the tangential field of view for plasma edge and the allocation of space. In the next experiment, the mechanical structure was redesigned with a barrel structure to absolutely isolate it from the vacuum vessel. Multiple shielding structures were mounted at the pinhole head to protect the metal foils from lithium coating. The pre-amplifiers were moved to the outside of the vacuum chamber to avoid introducing interference. Twisted copper cooling tube was embedded into the back-shell near the diode to limit the temperature of the preamplifiers and diode arrays during vacuum vessel baking when the temperature reached 150 °C. Electron temperature profiles were reconstructed from ME-SXR measurements using neural networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An efficient basis set representation for calculating electrons in molecules

The method of McCurdy, Baertschy, and Rescigno, is generalised to obtain a straightforward, surprisingly accurate, and scalable numerical representation for calculating the electronic wave functions of molecules. It uses a basis set of product sinc functions arrayed on a Cartesian grid, and yields 1 kcal/mol precision for valence transition energies with a grid resolution of approximately 0.1 bohr. The Coulomb matrix elements are replaced with matrix elements obtained from the kinetic energy operator. A resolution-of-the-identity approximation renders the primitive one- and two-electron matrix elements diagonal; in other words, the Coulomb operator is local with respect to the grid indices. The calculation of contracted two-electron matrix elements among orbitals requires only O( N log (N)) multiplication operations, not O( N 4 ), where N is the number of basis functions; N = n 3 on cubic grids. The representation not only is numerically expedient, but also produces energies and properties superior to those calculated variationally. Absolute energies, absorption cross sections, transition energies, and ionisation potentials are reported for 1- (He + , H + 2 ), 2- (H 2 , He), 10- (CH 4 ), and 56-electron (C 8 H 8 ) systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-mobility, air stable bottom-contact n-channel thin film transistors based on N,N′-ditridecyl perylene diimide

Bottom-gate bottom-contact (BGBC) organic thin film transistors (OTFTs) based on N,N′-ditridecyl perylene diimide exhibit electron mobility as high as 3.54 cm{sup 2} V{sup −1} s{sup −1} in nitrogen, higher than that (1 cm{sup 2} V{sup −1} s{sup −1}) of bottom-gate top-contact devices. The better performance of BGBC configuration in N{sub 2} is attributed to lower contact resistance, which is further reduced by thermal annealing. After thermally annealing the BGBC OTFTs at 180 °C, electron mobility as high as 3.5 cm{sup 2} V{sup −1} s{sup −1}, current on/off ratio of 10{sup 6} and threshold voltage of 9 V are achieved in air, and the mobility retains above 1 cm{sup 2} V{sup −1} s{sup −1} after storage for two months in air. Thermal treatment enhanced crystalline grains, reduced grain boundaries, and suppressed the adsorption of H{sub 2}O and O{sub 2}, leading to excellent performance in air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TlSn 2 I 5 , a Robust Halide Antiperovskite Semiconductor for γ-Ray Detection at Room Temperature

The semiconductor TlSn 2 I 5 with a two-dimensional crystal structure and an antiperovskite topology is a promising novel detection material. The compound crystallizes in the I4/mcm space group, has an indirect band gap of 2.14 eV, and melts congruently at 314 °C. Electronic band structure calculations reveal that the most facile electron transport is along the ab layered plane. Compared to CH 3 NH 3 PbX 3 (X = Br, I), TlSn 2 I 5 features higher long-term stability, higher photon stopping power (average atomic number of 55), higher resistivity (~10 10 Ω·cm), and robust mechanical properties. Centimeter-size TlSn 2 I 5 single crystals grown from the melt by the Bridgman method can be used to fabricate detector devices, which detect Ag Kα X-rays (22 keV), 57 Co γ-rays (122 keV), and 241 Am α-particles (5.5 MeV). The mobility-lifetime product and mobility for electrons were estimated to be 1.1 × 10 -3 cm 2 ·V -1 and 94 ± 16 cm 2 ·V -1 ·s -1 , respectively. Unlike other halide perovskites, TlSn 2 I 5 shows no signs of ionic polarization under long-term, high-voltage bias.

36 MATERIALS SCIENCE↗

Molecular-Frame Angular Distributions of Resonant CO:C(1s) Auger Electrons

The molecular-frame angular distributions of resonantly excited CO:C(1s){yields}{pi}* Auger electrons were determined using angle-resolved electron-ion coincidence spectroscopy in combination with a novel transformation procedure. Our new methodology yields full three-dimensional electron angular distributions with high energy resolution from the measurement of electrons at only two angles. The experimentally determined distributions are well reproduced by calculations performed in a simple one-center approximation, allowing an unambiguous identification of several overlapping Auger lines.

74 ATOMIC AND MOLECULAR PHYSICS↗

Addressing Shewanella oneidensis cytochromome : a first step towards high-throughput expression of cytochromes c.

Integrated studies that address proteins structure and function in the new era of systems biology and genomics often require the application of high-throughput approaches for parallel production of many different purified proteins from the same organism. Cytochromes c-electron transfer proteins carrying one or more hemes covalently bound to the polypeptide chain--are essential in most organisms. However, they are one of the most recalcitrant classes of proteins with respect to heterologous expression because post-translational incorporation of hemes is required for proper folding and stability. We have addressed this challenge by designing two families of vectors (total of 6 vectors) suitable for ligation-independent cloning and developing a pipeline for expression and solubility analysis of cytochromes c. This system has been validated by expression analysis of thirty genes from Shewanella oneidensis coding for cytochromes c or cytochromes c-type domains predicted to have 1-4 hemes. Out of 30 targets, 26 (87%) were obtained in soluble form in one or more vectors. This work establishes a methodology for high-throughput expression of this class of proteins and provides a clone resource for the microbiological and functional genomics research communities.

59 BASIC BIOLOGICAL SCIENCES↗

The Low-Lying Electronic States of NO 2 : Potential Energy and Dipole Surfaces, Bound States, and Electronic Absorption Spectrum

Nitrogen dioxide, NO 2 , is a free radical composed of the two most abundant elements in Earth’s atmosphere, nitrogen and oxygen, and is relevant to atmospheric and combustion chemistry. The electronic structure of even its lowest-lying states is remarkably complex, with various conical intersections and Renner–Teller pairings, giving rise to complex and perturbed vibronic states. Here we report some analysis of the 18 molecular states of doublet spin-multiplicity formed by combining ground-state N( 4 S u ) and O( 3 P g ) atoms. In this work, three-dimensional potential energy surfaces were fit at the MRCI(Q)-F12/VTZ-F12 level, describing the lowest four ($\tilde X$, $\tilde A$, $\tilde B$, and $\tilde C$) electronic states. A properties-based diabatization procedure was applied to accommodate the intersections, producing energies in a quasidiabatic representation and yielding couplings that were also fit into surfaces. The low-lying vibrational levels on the ground $\tilde X$ state were computed and compared with experimental measurements. Compared to experiment, the lowest 125 calculated vibrational levels (up to 8500 cm –1 above the zero-point energy) have a root-mean-squared error of 16.5 cm –1 . In addition, dipole moments for each of the lowest four electronic states—and the transition dipoles between them—were also computed and fit. With the coupled energy and dipole surfaces, the electronic spectrum was calculated in absolute intensity and compared with experimental measurements. Detailed structure in the experimental spectrum was successfully reproduced, and the total integrated intensity matches experiment to an accuracy of ~1.5% with no empirical adjustments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗