Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EDX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Investigation of Microstructural and Magnetic Properties of BaV{sub x}Fe{sub 12−x}O{sub 19} Nanohexaferrites

Nanohexaferrites of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) were prepared using sol–gel auto-combustion. The structure and morphology of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) nano-sized hexaferrites were explored by X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDXS. XRD analysis indicated particle size in the 55–60-nm interval. SEM and EDXS investigations confirmed the formation of the desired composition of V-substituted Ba-hexaferrites. The magnetic properties of products were studied. The magnetic M(H) hysteresis loops revealed that all produced nanohexaferrites display ferromagnetic-like comportment. The deduced saturation magnetization (M{sub s}), retentivity (M{sub r}), magneto-crystalline anisotropy fields (H{sub a}), and coercive field (H{sub c}) were enhanced for low V{sup 3+} contents and were maximum for BaV{sub 0.04}Fe{sub 11.96}O{sub 19} (x = 0.04) nanohexaferrites, showing the strengthening of magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Production of cyclo-hafnium metal–organic thin film using a specific method

Cyclo-hafnium metal–organic thin film was successfully synthesized and deposited on amorphous glass using a specific method, where amorphous substrate was used for synthesis and coating. Then, the film was annealed at 300 °C in an oven (ambient conditions). Optical and structural properties of the films were also investigated within the study. The structure of the film was analyzed using the mid-infrared spectrum. Optical properties were investigated via the UV–Vis spectroscopic technique. Film thickness was measured with AFM (tapping mode). Surface properties and elemental ratio of the films were examined and measured with SEM and EDX analysis. The highest transmittance and lowest reflectance values within the visible range were identified. The characteristic triethanolamine and hafnium-oxide peaks were observed in the infrared spectrum. FIR spectra of the films were found to be in accordance with the literature. SEM images of the films revealed that the surface of the films is fragile. EDX analysis of hafnium, organic parts of the compound and some minerals of amorphous glass were shown.

36 MATERIALS SCIENCE↗

Investigations of Polymethacrylate Tribochemical Films Using X-Ray Spectroscopy and Optical Profilometry

This study investigates the elemental composition and surface morphology of solid tribochemical films formed on steel surfaces. The reversible addition-fragmentation chain transfer (RAFT) method was used to synthesize nine different metal-free polymers, which were blended into commercial base oils. The polymers were either homopolymers of dodecyl methacrylate and ethylhexyl methacrylate or were co-polymers of these monomers with six polar monomers. After tribological testing at 100 degrees C using the ball-on-flat geometry, the resulting tribochemical films were imaged using scanning electron microscopy (SEM) and optical microscopy. The resulting tribochemical films have thicknesses around 50-100 nm. Two of the films corresponding to small (P1-imidazole-containing copolymer) and large (P3-less polar homopolymer) wear were cross-sectioned using focused ion beam (FIB) and analyzed for elemental composition using energy-dispersive X-Ray (EDX) mapping. Oxygen and nitrogen enrichment was observed, consistent with the relative chemical composition of the precursor polymers. Transmission electron microscopy (TEM) evidence suggests that at the worn surface, some organic elements penetrate or are mixed into the steel substrate giving an interlocking appearance. The two samples examined with TEM showed that P1 tribofilm is diffused or mixed with the steel substrate more so than P3, suggesting a stronger affinity and contact during tribofilm formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of Iron with Alumina Refractory Under Flash Ironmaking Conditions

A novel flash ironmaking technology (FIT) based on the direct reduction of iron ore concentrate by a reducing gas such as hydrogen, natural gas, or coal gas has been developed at the University of Utah. A proper choice of refractories is expected to play an important role in the development of FIT and its scale-up. In this work, the interaction of iron with alumina refractory under flash ironmaking conditions has been investigated. A thermodynamic basis for the interaction phenomena has been developed by considering the Fe-Al-O system, and a kinetic model based on solid-state diffusion is proposed to describe the growth of the hercynite (FeAl{sub 2}O{sub 4}) spinel formed as a result of the interaction between Fe, O (from H{sub 2}O and CO{sub 2}), and Al{sub 2}O{sub 3}. Experiments were conducted with Fe powders and pure Al{sub 2}O{sub 3} in the temperature range 1200 to 1500 °C under gas atmospheres relevant to flash ironmaking, and the reacted samples were analyzed using XRD, SEM-EDX, and EPMA techniques. The analyses of reacted samples confirmed the formation of the hercynite (FeAl{sub 2}O{sub 4}) spinel phase and the thickness of the FeAl{sub 2}O{sub 4} spinel as measured using elemental line scans in SEM-EDX and EPMA varied in the range of 0.5 to 1.3 mm. Results showed that the proposed model suitably describes the growth of the hercynite spinel layer, which obeyed the parabolic rate law at all temperatures. The parabolic rate constants were obtained and the diffusion-controlled growth of the FeAl{sub 2}O{sub 4} layer strongly depended on temperature. Furthermore, using the kinetic model, an expression for the effective diffusivity ( (D{sub eff})-bar ) was obtained and its values at the experimental temperatures were determined. The solid-state diffusion was an activated process, as expected, with an activation energy value of 231 kJ/mol.

36 MATERIALS SCIENCE↗

Electrochemical Characterization of Certain Mg-Based Alloys in Artificial Perspiration Biofluid for Consumer and Industrial Applications

The weight reduction of numerous consumer electronic devices is of increasing importance. In this respect, ultra-light magnesium alloys have attracted more attention to be used as frame materials. Nevertheless, Mg alloys are of intrinsically poor corrosion resistance, especially in chloride ion-containing environments. Human perspiration fluid with a relatively high chloride ions content (~ 0.14 M) comes in contact with a number of consumer products resulting in a variety of undesirable effects such as malfunction and corrosion. Based on that, the present work addresses the corrosion behavior of five AZ-Mg alloys including AZ91D, AZ80E, AZ31, AM60 and AXJ530 in artificial perspiration biofluid at human body temperature of 37 °C. The study is performed using electrochemical impedance spectroscopy and potentiodynamic polarization techniques supported by surface morphological and EDX spectra examinations. The surface layer total resistance value (R{sub T}) estimated from the analysis of obtained impedance data after 12-h exposure period reveals that durability of our tested samples increases in the following sequence: AZ80 > AZ91 > AZ31 > AM60 > AXJ530 > Mg (control). AZ80E alloy at top of this sequence points to its significantly high anti-corrosion performance in artificial perspiration biofluid and thus can be the best Mg materials of choice for many housing consumer electronic products. This outcome is in consistence with the corrosion rate (P{sub i} in mm y{sup −1}) trend as derived from the potentiodynamic polarization data that decreases in the following order: AZ80 (0.25) < AZ91 (0.49) < AZ31 (1.03) < AM60 (1.23) < AXJ530 (5.36) < Mg (5.98). Both FE-SEM images and EDX analyses further confirm these experimentally electrochemical findings.

36 MATERIALS SCIENCE↗

Generalized synthesis of high surface area mesoporous metal titanates as efficient heterogeneous catalysts

A novel metal dissolution coupled with reverse micelle formation approach is used as a generalized synthesis method for a series of high surface area metal titanates where the metals used are Bi, Mg, V, Mn, Fe, Co, Ni, Cu, Zn, Mo, W, and Ce. This study reports the highest surface areas published so far. The homogeneous distributions of the metals and titanium are observed in SEM-EDX and TEM mapping. The synthesized materials were comprehensively characterized using PXRD, Raman, nitrogen adsorption isotherms, SEM; EDX, TEM, TEM mapping, TGA, and XPS. The green catalytic oxidation of aniline to nitrosobenzene occurs within 30 min at room temperature when mesoporous W/Ti binary metal oxide is used as the catalyst. The radical mediated catalytic reaction gives excellent yields and the catalyst is reusable up to 4 reaction cycles without losing significant activity.

36 MATERIALS SCIENCE↗

Composition, morphology and nanostructure of C-S-H in 70% white Portland cement-30% fly ash blends hydrated at 55 {sup o}C

Outer product C-S-H had a mixture of fibrillar and foil-like morphology in a 28-day-old water-activated paste, and foil- or lath-like morphology in an alkali-activated paste. It was not possible to determine the chemical composition of C-S-H using SEM-EDX because of fine-scale intermixing with other phases; TEM-EDX was necessary. The C-S-H formed in the alkali-activated paste had a lower mean Ca/(Al + Si) ratio than that formed with water. The mean length of the aluminosilicate anions in the C-S-H was similar in both systems and increased with age; those in the Op C-S-H were likely to be shorter than those present in the Ip C-S-H with water activation, but longer (and more protonated) with alkali. The potassium in the alkali-activated paste was present either within the C-S-H structure charge balancing the substitution of Al{sup 3+} for Si{sup 4+}, or adsorbed on the C-S-H charge balancing sulfate ions.

36 MATERIALS SCIENCE↗

Manganese-calcium intermixing facilitates heteroepitaxial growth at the 10 1 ¯ 4 calcite-water interface

In situ atomic force microscopy (AFM) measurements were performed to probe surface precipitates that formed on the (10-14) surface of calcite (CaCO3) single crystals following reaction with Mn2+-bearing aqueous solutions with a range of initial concentrations. Three-dimensional epitaxial islands were observed to precipitate and grow on the surfaces and in situ time-sequenced measurements demonstrated that their growth rates were commensurate with those obtained for epitaxial islands formed on calcite crystals reacted with Cd2+-bearing aqueous solutions of the same range in supersaturation with respect to the pure metal carbonate phase. This finding was unexpected as rhodochrosite (MnCO3) and calcite display a 10% lattice mismatch, based on the area of their (10-14) surface unit cells, whereas the lattice mismatch is only 4% for otavite (CdCO3) and calcite. Coatings of varying thicknesses were therefore synthesized by reacting calcite single crystals with calcite-equilibrated aqueous solutions with concentrations of up to 250 µM MnCl2 and analyzed to determine the composition of the surface precipitates. Ex situ X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray reflectivity (XRR), and AFM measurements of the reacted crystals demonstrated the formation of an epitaxial (Mn,Ca)CO3 solid solution with a spatially complex composition atop the calcite surface, whereby the first few nanometers were rich in Ca and the Mn content increased with distance from the original calcite surface, culminating in a topmost region of almost pure MnCO3 for the thickest coatings. These findings explain the measured growth rates (the effective lattice mismatch was much smaller than nominal mismatch) and highlight the strong influence played by the substrate on the composition of surface precipitates in aqueous conditions.

Environmental Molecular Sciences Laboratory↗

Pressurized chemical-looping combustion of coal with an iron ore-based oxygen carrier

Chemical-looping combustion (CLC) is a new combustion technology with inherent separation of CO{sub 2}. Most of the previous investigations on CLC of solid fuels were conducted under atmospheric pressure. A pressurized CLC combined cycle (PCLC-CC) system is proposed as a promising coal combustion technology with potential higher system efficiency, higher fuel conversion, and lower cost for CO{sub 2} sequestration. In this study pressurized CLC of coal with Companhia Valedo Rio Doce (CVRD) iron ore was investigated in a laboratory fixed bed reactor. CVRD iron ore particles were exposed alternately to reduction by 0.4 g of Chinese Xuzhou bituminous coal gasified with 87.2% steam/N{sub 2} mixture and oxidation with 5% O{sub 2} in N{sub 2} at 970 C. The operating pressure was varied between 0.1 MPa and 0.6 MPa. First, control experiments of steam coal gasification over quartz sand were performed. H{sub 2} and CO{sub 2} are the major components of the gasification products, and the operating pressure influences the gas composition. Higher concentrations of CO{sub 2} and lower fractions of CO, CH{sub 4}, and H{sub 2} during the reduction process with CVRD iron ore was achieved under higher pressures. The effects of pressure on the coal gasification rate in the presence of the oxygen carrier were different for pyrolysis and char gasification. The pressurized condition suppresses the initial coal pyrolysis process while it also enhances coal char gasification and reduction with iron ore in steam, and thus improves the overall reaction rate of CLC. The oxidation rates and variation of oxygen carrier conversion are higher at elevated pressures reflecting higher reduction level in the previous reduction period. Scanning electron microscope and energy-dispersive X-ray spectroscopy (SEM-EDX) analyses show that particles become porous after experiments but maintain structure and size after several cycles. Agglomeration was not observed in this study. An EDX analysis demonstrates that there is very little coal ash deposited on the oxygen carrier particles but no appreciable crystalline phases change as verified by X-ray diffraction (XRD) analysis. Overall, the limited pressurized CLC experiments carried out in the present work suggest that PCLC of coal is promising and further investigations are necessary. (author)

01 COAL, LIGNITE, AND PEAT↗

[Zr{sub 0.72}Y{sub 0.28}]Al{sub 4}C{sub 4}: A new member of the homologous series (MC){sub l}(T{sub 4}C{sub 3}){sub m} (M=Zr, Y and Hf, T=Al, Si and Ge)

A new layered carbide, [Zr{sub 0.72(3)}Y{sub 0.28(3)}]Al{sub 4}C{sub 4}, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The atom ratios [Zr:Y] were determined by EDX, and the initial structure model was derived by the direct methods, and further refined by Rietveld method. The crystal is trigonal (space group P3-barm1, Z=1) with lattice dimensions of a=0.333990(5) nm, c=1.09942(1) nm and V=0.106209(2) nm{sup 3}. This compound shows an intergrowth structure with [Zr{sub 0.72}Y{sub 0.28}C{sub 2}] thin slabs separated by Al{sub 4}C{sub 3}-type [Al{sub 4}C{sub 4}] layers. It is a new member with l=1 and m=1 of the homologous series, the general formula of which is (MC){sub l}(T{sub 4}C{sub 3}){sub m} (l=1, 2 and 3, m=1 and 2, M=Zr, Y and Hf, T=Al, Si and Ge). - Graphical Abstract: The layered carbide (Zr{sub 0.72}Y{sub 0.28}C)Al{sub 4}C{sub 3} has been synthesized and found to be a new member with l=1 and m=1 of the homologous series (MC){sub l}(T{sub 4}C{sub 3}){sub m} (l=1, 2 and 3, m=1 and 2, M=Zr, Y and Hf, T=Al, Si and Ge).

36 MATERIALS SCIENCE↗

First discovery and structural characterization of a new compound in Al-Si-O-C system

A quaternary oxycarbide, [Al{sub 16.77(5)}Si{sub 1.23(5)}]{sub S}IGMA{sub 1{sub 8}}[O{sub 3.04(9)}C{sub 10.96(9)}]{sub S}IGMA{sub 1{sub 4}}, has been for the first time discovered in the Al-Si-O-C system. The crystal structure was characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The atom ratios [Al:Si] were determined by EDX, and the initial structural model was derived by the direct methods. The structural parameters as well as the atom ratios [O:C] were determined by the Rietveld method. The crystal is monoclinic (space group C2/m, Z=1) with lattice dimensions a=0.57404(1) nm, b=0.331435(5) nm, c=1.92410(2) nm, beta=90.036(1){sup o} and V=0.366076(9) nm{sup 3}. The final structural model showed the positional disordering of Al/Si sites. The validity of the split-atom model was verified by the three-dimensional electron density distribution, the structural bias of which was reduced as much as possible using the maximum-entropy methods-based pattern fitting (MPF). The reliability indices calculated from the MPF were R{sub wp}=4.20% (S=1.14), R{sub p}=3.09%, R{sub B}=0.92% and R{sub F}=1.05%. The crystal was an inversion twin with nearly the same twin fraction. - Graphical abstract: A quaternary oxycarbide firstly discovered in the Al-Si-O-C system. The crystal is an inversion twin, and hence the structure is represented by a split-atom model. The three-dimensional electron density distribution is determined by the maximum-entropy methods-based pattern fitting, being consistent with the disordered structural model.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of Al{sub 4}SiC{sub 4}-homeotypic aluminum silicon oxycarbide, [Al{sub 4.4}Si{sub 0.6}][O{sub 1.0}C{sub 2.0}]C

A new quaternary layered oxycarbide, [Al{sub 4.39(5)}Si{sub 0.61(5)}]{sub S}IGMA{sub 5}[O{sub 1.00(2)}C{sub 2.00(2)}]{sub S}IGMA{sub 3}C, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound was found to be hexagonal with space group P6{sub 3}/mmc, Z=2, and unit-cell dimensions a=0.32783(1) nm, c=2.16674(7) nm and V=0.20167(1) nm{sup 3}. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The maximum-entropy methods-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R{sub wp}=3.73% (S=1.20), R{sub p}=2.94%, R{sub B}=1.04% and R{sub F}=0.81%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al{sub 4}SiC{sub 4} (space group P6{sub 3}mc, Z=2). - Graphical abstract: A new oxycarbide discovered in the Al-Si-O-C system, Al{sub 4}SiC{sub 4}-homeotypic [Al{sub 4.4}Si{sub 0.6}][O{sub 1.0}C{sub 2.0}]C. The crystal is an inversion twin, and hence the structure is represented by a split-atom model. The three-dimensional electron density distributions are determined by the maximum-entropy methods-based pattern fitting, being consistent with the disordered structural model.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of Al{sub 4}Si{sub 2}C{sub 5}-homeotypic aluminum silicon oxycarbide, (Al{sub 6-x}Si{sub x})(O{sub y}C{sub 5-y}) (x{approx}0.8 and y{approx}1.6)

We have prepared a new layered oxycarbide, [Al{sub 5.25(5)}Si{sub 0.75(5)}][O{sub 1.60(7)}C{sub 3.40(7)}], by isothermal heating of (Al{sub 4.4}Si{sub 0.6})(O{sub 1.0}C{sub 3.0}) at 2273 K near the carbon-carbon monoxide buffer. The crystal structure was characterized using X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound is trigonal with space group R3m (centrosymmetric), Z=3, and hexagonal cell dimensions a=0.32464(2) nm, c=4.00527(14) nm and V=0.36556(3) nm{sup 3}. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The reliability indices were R{sub wp}=4.45% (S=1.30), R{sub p}=3.48%, R{sub B}=2.27% and R{sub F}=1.25%. The crystal is composed of three types of domains with nearly the same fraction, one of which has the crystal structure of space group R3-bar m. The crystal structure of the remaining two domains, which are related by pseudo-symmetry inversion, is noncentrosymmetric with space group R3m. - Graphical Abstract: A new aluminum silicon oxycarbide, (Al{sub 6-x}Si{sub x})(O{sub y}C{sub 5-y}) (x{approx}0.8 and y{approx}1.6). The crystal is composed of three types of domains (I, II and III), and hence the structure is represented by a split-atom model. Individual crystal structures can be regarded as layered structures, which consist of A-type [(Al,Si){sub 4}(O,C){sub 4}] unit layers and B-type [(Al,Si)(O,C){sub 2}] single layers.

36 MATERIALS SCIENCE↗

Enhanced visible-light absorption and dopant distribution of iodine-TiO{sub 2} nanoparticles synthesized by a new facile two-step hydrothermal method

In order to prepare visible-light responsive iodine-doped TiO{sub 2}, a new facile synthetic approach was proposed, which started with the cost-efficient and environmentally friendly precursor of undoped anatase TiO{sub 2} to form nanotube structures as templates that collapsed and recrystallized into I-TiO{sub 2} nanopowders in HIO{sub 3} solution, followed by annealing at different temperatures. The modification of TiO{sub 2} to incorporate iodine and form titanium dioxide with significantly enhanced absorption in the visible range of the spectrum was investigated. The extent of iodine dopant incorporation was determined by X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDX) and was found to be homogenously distributed on each nanostructure as determined by electron energy-loss spectroscopy (EELS) elemental mapping and EDX spectroscopy. The modified TiO{sub 2} exhibits a dramatically extended absorption edge beyond 800 nm as compared to the original and unmodified TiO{sub 2}. - Graphical abstract: As-synthesized I-TiO{sub 2} nanoparticles show significantly enhanced visible-light absorption, with the dopant iodine homogenously dispersed on each I-TiO{sub 2} nanostructure based on EELS elemental mapping. Highlights: > Iodine-TiO{sub 2} nanoparticles by a new facile two-step hydrothermal method. > Significantly enhanced light absorption in the visible range of the spectrum. > Homogenous dopant distribution within each nanostructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural characterization of Al{sub 7}C{sub 3}N{sub 3}-homeotypic aluminum silicon oxycarbonitride, (Al{sub 7-x}Si{sub x})(O{sub y}C{sub z}N{sub 6-y-z}) (x{approx}1.2, y{approx}1.0 and z{approx}3.5)

A new aluminum silicon oxycarbonitride, (Al{sub 5.8}Si{sub 1.2})(O{sub 1.0}C{sub 3.5}N{sub 1.5}), has been synthesized and characterized by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS). The title compound is hexagonal with space group P6{sub 3}/mmc and unit-cell dimensions a=0.322508(4) nm, c=3.17193(4) nm and V=0.285717(6) nm{sup 3}. The atom ratios of Al:Si and those of O:C:N were, respectively, determined by EDX and EELS. The initial structural model was successfully derived from the XRPD data by the direct methods and further refined by the Rietveld method. The crystal is most probably composed of four types of domains with nearly the same fraction, each of which is isotypic to Al{sub 7}C{sub 3}N{sub 3} with space group P6{sub 3}mc. The existence of another new oxycarbonitride (Al{sub 6.6}Si{sub 1.4})(O{sub 0.7}C{sub 4.3}N{sub 2.0}), which must be homeotypic to Al{sub 8}C{sub 3}N{sub 4}, has been also demonstrated by XRPD and TEM. - Graphical abstract: A new oxycarbonitride discovered in the Al-Si-O-C-N system, (Al{sub 7-x}Si{sub x})(O{sub y}C{sub z}N{sub 6-y-z}) (x{approx}1.2, y{approx}1.0 and z{approx}3.5). The crystal is composed of four types of domains (I, II, III and IV), and hence the structure is represented by a split-atom model. Individual crystal structures can be regarded as layered structures, which consist of A-type [(Al, Si){sub 4}(O, C, N){sub 4}] unit layers and B-type [(Al, Si)(O, C, N){sub 2}] single layers. Highlights: > (Al{sub 5.8}Si{sub 1.2})(O{sub 1.0}C{sub 3.5}N{sub 1.5}) as a new aluminum silicon oxycarbonitride. > Crystal structure is determined and represented by a split-atom model. > Existence of another new oxycarbonitride (Al{sub 6.6}Si{sub 1.4})(O{sub 0.7}C{sub 4.3}N{sub 2.0}) is demonstrated. > Both new materials are formed by oxidation and nitridation of (Al, Si){sub 6}(O, C){sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary system Er-Ni-In at T=870 K

Isothermal section of the Er-Ni-In system at T=870 K was constructed by means of X-ray powder diffraction and EDX-analyses. Nine ternary compounds, namely ErNi{sub 9}In{sub 2} (YNi{sub 9}In{sub 2}-type), Er{sub 1-1.22}Ni{sub 4}In{sub 1-0.78} (MgCu{sub 4}Sn-type), Er{sub 10}Ni{sub 9.07}In{sub 20} (Ho{sub 10}Ni{sub 9}In{sub 20}-type), ErNi{sub 1-0.60}In{sub 1-1.40} (ZrNiAl-type), Er{sub 2}Ni{sub 2}In (Mn{sub 2}AlB{sub 2}-type), Er{sub 2}Ni{sub 1.78}In (Mo{sub 2}FeB{sub 2}-type), Er{sub 5}Ni{sub 2}In{sub 4} (Lu{sub 5}Ni{sub 2}In{sub 4}-type), Er{sub 5}Ni{sub 2}In (Mo{sub 5}SiB{sub 2}-type), and Er{sub 13.53}Ni{sub 3.14}In{sub 3.33} (Lu{sub 14}Co{sub 2}In{sub 3}-type), exist in the Er-Ni-In system at this temperature. The substitution of Ni for In was observed for ErNi{sub 1-0.60}In{sub 1-1.40} and In for Er in the case of related compounds ErNi{sub 2} and ErNi{sub 4}In. Er can enter NiIn (CoSn-type) leading to including-substitution type of compound Er{sub 0-0.12}NiIn{sub 1-0.89}. Basic magnetic properties of the Er{sub 0.04}NiIn{sub 0.97}, ErNi{sub 2}, Er{sub 0.9}Ni{sub 2}In{sub 0.1}, and ErNi{sub 4}In phases were inspected. Electrical-resistivity studies were performed on the ErNiIn, ErNi{sub 0.9}In{sub 1.1}, and ErNi{sub 4}In phases. - Graphical Abstract: Phase relations in the ternary system Er-Ni-In have been established for the isothermal section at T=870 K based on X-ray phase and EDX-analyses. Nine ternary compounds were observed. Highlights: > Isothermal section of Er-Ni-In system at T=870 K was constructed. > Nine ternary compounds were detected. > Basic magnetic properties of Er{sub 0.04}NiIn{sub 0.97} and ErNi{sub 4}In phases were inspected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

N-type thermoelectric recycled carbon fibre sheet with electrochemically deposited Bi{sub 2}Te{sub 3}

An N-type thermoelectric recycled carbon fibre sheet with bismuth telluride coating has been successfully synthesised through an electro-deposition technique. The Seebeck coefficient and electrical properties of the combined recycled carbon fibre sheet and bismuth telluride films are reported. Classification of the crystal structure, surface morphology and the elemental composition of the resulting deposits are methodically characterised by XRD, SEM and EDX. Cyclic voltammetry is also carried out in nitric acid solutions to investigate the right range of deposition potential. The synthesis N-type thermoelectric sheet has a highest attainable Seebeck coefficient of -54 {mu}V K{sup -1} and an electrical resistivity of 8.9 Multiplication-Sign 10{sup -5} Ohm-Sign m. The results show slight differences in morphologies and thermoelectric properties for the films deposited at varying deposition potential. The increase in thermoelectrical properties of the recycled carbon fibre is in line with the development of using coated recycled fibre for thermoelectrical applications. - Graphical abstract: SEM image of an N-type thermoelectric recycled carbon fibre sheet with Bi{sub 2}Te{sub 3} coatings. Highlights: Black-Right-Pointing-Pointer N-type thermoelectric sheet is synthesis through the electrodeposition of Bi{sub 2}Te{sub 3}. Black-Right-Pointing-Pointer Bi{sub 2}Te{sub 3} composition can be controlled by varying the deposition voltage. Black-Right-Pointing-Pointer Seebeck coefficient and electrical properties of the combined sheet were reported. Black-Right-Pointing-Pointer Material characterisations of the deposits are done using XRD, SEM and EDX.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural properties of ultrafine Ba-hexaferrite nanoparticles

Crystal structure of ultrafine Ba-hexaferrite (BaFe{sub 12}O{sub 19}) nanoparticles was studied using X-ray diffractometry (XRD), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDXS), X-ray absorption fine structure (XAFS), and Moessbauer spectroscopy (MS), to be compared to the structure of larger nanoparticles and the bulk. The nanoparticles were synthesized with hydrothermal treatment of an appropriate suspension of Ba and Fe hydroxides in the presence of a large excess of OH{sup -}. The ultrafine nanoparticles were formed in a discoid shape, {approx}10 nm wide and only {approx}3 nm thick, comparable to the size of the hexagonal unit cell in the c-direction. The HRTEM image analysis confirmed the hexaferrite structure, whereas EDXS showed the composition matching the BaFe{sub 12}O{sub 19} formula. XAFS and MS analyses showed considerable disorder of the structure, most probably responsible for the low magnetization. - Graphical abstract: Left: HREM image of an ultrafine Ba-hexaferrite nanoparticle (inset: TEM image of the nanoparticles); Right: the experimental HRTEM image is compared with calculated image and corresponding atomic model. Highlights: Black-Right-Pointing-Pointer Crystal structure of ultrafine Ba-hexaferrite (BaFe{sub 12}O{sub 19}) nanoparticles was compared to the structure of the bulk. Black-Right-Pointing-Pointer Thickness the discoid nanoparticles was comparable to the size of the hexagonal unit cell in the c-direction. Black-Right-Pointing-Pointer Considerable disorder of the nanoparticles' structure is most probably responsible for their low magnetization.

36 MATERIALS SCIENCE↗