Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dual”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Roll-to-Roll, Dual-Layer Slot Die Coating of Chitin and Cellulose Oxygen Barrier Films for Renewable Packaging

Cellulose and chitin are the two most abundant naturally produced biopolymers and are being extensively studied as candidates for renewable oxygen barrier films used in packaging. It has been shown that bilayers formed from cellulose nanocrystals (CNCs) and chitin nanofibers (ChNFs) exhibit oxygen barrier properties similar to polyethylene terephthalate (PET). However, this prior work explored only coating each layer individually in sequence through techniques such as spray coating. Here, we demonstrate the viability of dual-layer slot die coating of CNC/ChNF bilayers onto cellulose acetate (CA) substrates. The dual-layer slot die method enables significantly lower oxygen permeability versus spray coating while using a roll-to-roll system that applies the bilayer in a single pass. This work discusses suspension properties, wetting, and drying conditions required to achieve well-controlled ChNF/CNC bilayers. Spray-coated bilayer films were on average 25% thinner than the dual-layer bilayer film; however, the thickness-normalized oxygen permeability (OP) of the dual-layer-coated ChNF/CNC bilayer film on CA was 20 times better than that of the spray-coated bilayers. Additionally, it has been shown that ChNF contributes to the wetting and barrier properties. Values of OP for the slot die-coated bilayers under optimized drying conditions were as low as 1.2 cm 3 ∙μm∙m -2 ∙d -1 ∙kPa -1 , corresponding to a normalized oxygen transmission rate of 0.32 cm 3 ∙m -2 ∙d -1 at 23 °C and 50% relative humidity. It is also noted that the adhesive properties of the dual-layer coating are also improved when films are air-dried and that ChNF contributes to the wetting and barrier properties.

09 BIOMASS FUELS↗
DOE OSTI2025

Simultaneous Control of Unburned NH 3 and NO x Emissions From High Load Dual-Fuel Ammonia Operation on a High-Speed Diesel Engine Using a Cu-SCR System

Dual-fuel ammonia strategies are being investigated as a promising way to utilize NH 3 as an alternative fuel for internal combustion engines in the maritime sector. One of the remaining barriers to implementing dual-fuel NH 3 combustion strategies is understanding ways to minimize unburned NH 3 and nitrogen oxide (NO x ) emissions from these engines, both of which are elevated relative to a conventional diesel baseline. Selective catalytic reduction (SCR) systems are widely used for lean NO x emission controls for engines across transportation and stationary energy applications. SCR systems use a reducing agent, such as NH 3 , to react with NO x in the exhaust, converting it into nitrogen and water. Typically, NH 3 is injected into the exhaust as a urea solution. In dual-fuel NH 3 engines, where unburned NH 3 is present in the exhaust, an SCR system could be used to mitigate both NH 3 and NO x emissions. The presented work evaluates a commercial copper-zeolite SCR and ammonia slip catalyst system, designed for on-road diesel engine applications, for controlling unburned NH 3 and NO x emissions from a dual-fuel NH 3 combustion engine. The aftertreatment system was installed downstream of a single-cylinder four-stroke diesel engine that has been modified for dual-fuel ammonia use. Furthermore, the emissions were characterized by using a Fourier transform infrared spectrometer for both late- and early-injection diesel pilot strategies over three air–fuel equivalence ratios spanning from 1.6 to 1.0 at 1200 rpm and 12.6 bar IMEP g condition (with greater than 95% ammonia energy fraction). Initial findings indicate that the SCR achieves more than 99% NO x conversion with less than 50 ppm NH 3 slip at air–fuel equivalence ratios greater than 1.4 at the operating conditions investigated. However, these benefits are accompanied by additional N 2 O emissions that are formed over the Cu-SCR.

Catalysts↗
DOE OSTI2024

Revealing the landscape of globally color-dual multi-loop integrands

Abstract We report on progress in understanding how to construct color-dual multi-loop amplitudes. First we identify a cubic theory, semi-abelian Yang-Mills, that unifies many of the color-dual theories studied in the literature, and provides a prescriptive approach for constructingD-dimensional color-dual numerators through one-loop directly from Feynman rules. By a simple weight counting argument, this approach does not further generalize to two-loops. As a first step in understanding the two-loop challenge, we use aD-dimensional color-dual bootstrap to successfully construct globally color-duallocaltwo-loop four-point nonlinear sigma model (NLSM) numerators. The double-copy of these NLSM numerators with themselves, pure Yang-Mills, and$$\mathcal{N}$$= 4 super-Yang-Mills correctly reproduce the known unitarity constructed integrands of special Galileons, Born-Infeld theory, and Dirac-Born-Infeld-Volkov-Akulov theory, respectively. Applying our bootstrap to two-loop four-point pure Yang-Mills, we exhaustively search the space of local numerators and find that it fails to satisfy global color-kinematics duality, completing a search previously initiated in the literature. We pinpoint the failure to the bowtie unitarity cut, and discuss a path forward towards non-local construction of color-dual integrands at generic loop order.

Physics↗
DOE OSTI2025

Dual Inhibitors of SARS-CoV-2 3CL Protease and Human Cathepsin L Containing Glutamine Isosteres Are Anti-CoV-2 Agents

SARS-CoV-2 3CL protease (Main protease) and human cathepsin L are proteases that play unique roles in the infection of human cells by SARS-CoV-2, the causative agent of COVID-19. Both proteases recognize leucine and other hydrophobic amino acids at the P 2 position of a peptidomimetic inhibitor. At the P 1 position, cathepsin L accepts many amino acid side chains, with a partial preference for phenylalanine, while 3CL-PR protease has a stringent specificity for glutamine or glutamine analogues. We have designed, synthesized, and evaluated peptidomimetic aldehyde dual-target (dual-acting) inhibitors using two peptide scaffolds based on those of two Pfizer 3CL-PR inhibitors, Nirmatrelvir, and PF-835321. Our inhibitors contain glutamine isosteres at the P 1 position, including 2-pyridon-3-yl-alanine, 3-pyridinyl-alanine, and 1,3-oxazo-4-yl-alanine groups. Inhibition constants for these new inhibitors ranged from K i = 0.6–18 nM (cathepsin L) and K i = 2.6–124 nM (3CL-PR), for which inhibitors with the 2-pyridon-3-yl-alanal substituent were the most potent for 3CL-PR. The anti-CoV-2 activity of these inhibitors ranged from EC 50 = 0.47–15 μM. X-ray structures of the peptidomimetic aldehyde inhibitors of 3CL-PR with similar scaffolds all demonstrated the formation of thiohemiacetals with Cys 145 , and hydrogen-bonding interactions with the heteroatoms of the pyridon-3-yl-alanyl group, as well as the nitrogen of the N-terminal indole and its appended carbonyl group at the P 3 position. The absence of these hydrogen bonds for the inhibitors containing the 3-pyridinyl-alanyl and 1,3-oxazo-4-yl-alanyl groups was reflected in the less potent inhibition of the inhibitors with 3CL-PR. In summary, our studies demonstrate the value of a second generation of cysteine protease inhibitors that comprise a single agent that acts on both human cathepsin L and SARS-CoV-2 3CL protease. Such dual-target inhibitors will provide anti-COVID-19 drugs that remain active despite the development of resistance due to mutation of the viral protease. Such dual-target inhibitors are more likely to remain useful therapeutics despite the emergence of inactivating mutations in the viral protease because the human cathepsin L will not develop resistance. This particular dual-target approach is innovative since one of the targets is viral (3CL-PR) required for viral protein maturation and the other is human (hCatL) which enables viral infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

MUSE adaptive-optics spectroscopy confirms dual active galactic nuclei and strongly lensed systems at sub-arcsec separation

The novel Gaia multi peak (GMP) technique has proven to be able to successfully select dual and lensed active galactic nuclei (AGN) candidates at sub-arcsecond separations. Both populations are important because dual AGN represent one of the central, still largely untested, predictions of ΛCDM cosmology, and compact lensed AGN allow us to probe the central regions of the lensing galaxies. In this work, we present high-spatial-resolution spectroscopy of 12 GMP-selected systems. We used the adaptive-optics assisted integral-field spectrograph MUSE at the VLT to resolve each system and investigate the nature of each component. All targets show the presence of two components confirming the GMP selection. We classify 4 targets as dual AGN, 3 as lensed quasar candidates, and 5 as a chance alignment of a star and an AGN. With separations ranging from 0.30″ to 0.86″, these dual and lensed systems are among the most compact systems discovered to date at z > 0.5. This is the largest sample of distant dual AGN with sub-arcsecond separations ever presented in a single paper.

Scialpi, M. (ORCID:0009000651004986)↗
DOE OSTI2025

Development of High-Granularity Dual-Readout Calorimetry with psec Timing

Dual-readout and particle flow algorithm (PFA) are technologies proposed for precise jet energy measurement in future colliders. While PFA requires highly granular calorimeters, dual-readout has mainly been used with fiber-based calorimeters that do not have highly segmented capabilities. It is still non-trivial to combine these two technologies in one calorimeter system because of the use of fibers in most of the dualreadout calorimeters, which is not compatible with the high granularity requirement of PFA technologies. The aim of this study is to develop a novel calorimetry that combines dual-readout and PFA by adopting a highly segmented tile-based configuration. This paper compares the improvement of energy resolution using dual-readout approach across several configurations of highly granular hadron calorimeters through simulation. Results indicate that setups with fine sampling and close placement of scintillators and Cherenkov detectors improve dual-readout performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Dual Event Generator IOC (siocDualTiming) v1.0

Dual Timing IOC is an EPICS IOC that uses the "Dual Event Generator Support (dual-evg-support) v1.0" (track code: 2026-009) module to perform control and status of the "Dual Event Generator (dual-evg) v1.0" (track code: 2023-012) project, both of them previously disclosed.

Russo, Lucas [Lawrence Berkeley National Laborator↗
DOE OSTI2025

Dual dressed black holes as the end point of the charged superradiant instability in $\mathcal{N} = 4$ Yang Mills

Charged Black holes in AdS_5 × S^5 A d S 5 × S 5 suffer from superradiant instabilities over a range of energies. Hairy black hole solutions (constructed within gauged supergravity) have previously been proposed as endpoints to this instability. We demonstrate that these hairy black holes are themselves unstable to the emission of large dual giant gravitons. We propose that the endpoint to this instability is given by Dual Dressed Black Holes (DDBH)s; configurations consisting of one, two, or three very large dual giant gravitons surrounding a core AdS A d S black hole with one, two, or three SO(6) S O ( 6 ) chemical potentials equal to unity. The dual giants each live at AdS A d S radial coordinates of order \sqrt{N} N and each carry charge of order N^2 N 2 . The large separation makes DDBHs a very weakly interacting mix of their components and allows for a simple computation of their thermodynamics. We conjecture that DDBHs dominate the phase diagram of \mathcal{N}=4 𝒩 = 4 Yang-Mills over a range of energies around the BPS plane, and provide an explicit construction of this phase diagram, briefly discussing the interplay with supersymmetry. We develop the quantum description of dual giants around black hole backgrounds and explicitly verify that DDBHs are stable to potential tunneling instabilities, precisely when the chemical potentials of the core black holes equal unity. We also construct the 10-dimensional DDBH bulk solutions.

Choi, Sunjin (ORCID:0000000283310199)↗
DOE OSTI2026

Connecting Current and Future Dual Active Galactic Nucleus Searches to LISA and Pulsar Timing Array Gravitational-wave Detections

Abstract Dual active galactic nuclei (DAGN) mark the observable stage of massive black hole (MBH) pairing during galaxy mergers and are the progenitors of the MBH binaries that generate low-frequency gravitational waves. Using the large-volume ASTRID cosmological simulation, we construct mock DAGN catalogs tailored to the selection functions of current (COSMOS-Web and DESI) and forthcoming (Nancy Grace Roman Space Telescope (Roman) and Lynx X-ray Observatory (Lynx)) surveys, enabling direct comparisons between simulations and observations. With realistic observational selections, ASTRID reproduces the observed dual fractions, projected separations, and host-galaxy properties across redshifts. We predict a substantial population of small-separation (<5 kpc) duals that remain inaccessible to current surveys, demonstrating that the apparent paucity of subkiloparsec systems in COSMOS-Web is primarily a consequence of observational selection rather than an intrinsic absence. Following each simulated dual to coalescence, we show that DAGN are effective tracers of MBH mergers: ∼30%–70% merge within ≲1 Gyr, and 20%–60% of these mergers produce gravitational-wave signals detectable by the Laser Interferometer Space Antenna (LISA). Duals observable with Roman and Lynx are the progenitors of ∼10%–50% of low-redshift LISA sources and contribute ∼30% of the PTA-band stochastic gravitational-wave background. We further identify massive green-valley galaxies hosting moderate-luminosity active galactic nuclei (AGN), together with massive star-forming galaxies containing bright quasars at z > 1, as the environments most likely to host imminent MBH binaries. These results establish a unified cosmological framework connecting DAGN demographics, MBH binary evolution, and gravitational-wave sources, while identifying high-priority targets for coordinated electromagnetic and multimessenger observations in the coming decade.

Chen, Nianyi [Max-Planck-Institut für Astrophysik;↗
DOE OSTI2021

Isogeometric Bézier dual mortaring: The Kirchhoff–Love shell problem

Here in this paper we develop an isogeometric Bézier dual mortar method for coupling multi-patch Kirchhoff–Love shell structures. The proposed approach weakly enforces the continuity of the solution at patch interfaces through a dual mortar method and can be applied to both conforming and non-conforming discretizations. As the employed dual basis functions have local supports and satisfy the biorthogonality property, the resulting stiffness matrix is sparse. In addition, the coupling accuracy is optimal because the dual basis possesses the polynomial reproduction property. We also formulate the continuity constraints through the Rodrigues’ rotation operator which gives a unified framework for coupling patches that are intersected with G 1 continuity as well as patches that meet at a kink. Several linear and nonlinear examples demonstrated the performance and robustness of the proposed coupling techniques.

42 ENGINEERING↗
DOE OSTI2025

Expanding the Landscape of Dual Action Antifolate Antibacterials through 2,4-Diamino-1,6-dihydro-1,3,5-triazines

Antibiotics that operate via multiple mechanisms of action are a promising strategy to combat growing resistance. Previous studies have shown that dual action antifolates formed from a pyrroloquinazolinediamine core can inhibit the growth of bacterial pathogens without developing resistance. Here, in this work, we expand the scope of dual action antifolates by repurposing the 2,4-diamino-1,6-dihydro-1,3,5-triazine (DADHT) cycloguanil scaffold to a variety of derivatives designed to inhibit dihydrofolate reductase (DHFR) and disrupt bacterial membranes. Dual mechanism DADHTs have activity against a variety of target pathogens, including Mycobacterium tuberculosis, Mycobacterium abscessus, and Pseudomonas aeruginosa, among other ESKAPEE organisms. Through X-ray crystallography, we confirmed engagement of the Escherichia coli DHFR target and found that some DADHTs stabilize a previously unobserved conformation of the enzyme but, broadly, bind in the occluded conformation. Using in vitro inhibition of purified E. coli and Staphylococcus aureus DHFR and disruption of E. coli membranes, we determined that alkyl substitution of dihydrotriazine at the 6-position best optimizes the DADHT's two mechanisms of action. By employing both mechanisms, the DADHT spectrum of activity was extended beyond the scope of traditional antifolates. Finally, we are optimistic that the dual mechanism approach, particularly through the action of antifolates, offers a unique means of combating hard-to-treat bacterial infections.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

System Resilience Benefits of Dual-Fuel Capable Generators

The growing dependency on natural gas (NG) for power generation raises challenges for ensuring the resilience of power systems during extreme cold weather. Dual-fuel capable generators that can switch from burning NG to distillate fuel oil during an NG shortage over one way to alleviate these challenges. In this study, the impacts of gas unavailability on the IEEE 73-bus reliability test system (RTS) with 2019 updated generation mixture are explored. An extension to the standard production cost model formulation of unit commitment and economic dispatch is proposed to allow the representation of dual-fuel capable generators that can switch fuels between NG and distillate oil with a specified oil tank capacity and tank refueling capability. The operation of the system under gas unavailability with 0%, 25%, 50%, 75%, and 100% of combined cycle and combustion turbine generators as dual-fuel capable with a one-day supply of fuel oil are simulated using PLEXOS, a production cost model. The dual-fuel generator performance, unserved energy, and system costs are fully assessed.

dual-fuel capable generator↗
DOE OSTI2022

Applications of a dual-column technique in actinide separations

Selective separation of an individual actinide of interest from other actinides and accompanying lanthanides is a challenging task in radiochemistry and radioanalytical chemistry. This paper illustrates a dual column technique (i.e., stacked columns of two appropriate resins) to separate an individual actinide of interest, where the selection of two resins and a common effluent running through the stacked columns are key parameters in design of an appropriate dual column. This paper describes the dual column design and practice with two examples, one for a heavy actinide 249Bk and the other for a light actinide 230U. In the former case, stacked columns of anion exchange (AX) resin and LN resin replaced the traditional CX-AHIB method used at Oak Ridge National Laboratory for 60 years. In the latter case, an elution process with an AX column followed with a stacked column of AX resin and a DGA resin was applied, instead of traditional methods, e.g., PUREX or U-TEVA methods. Application results of the dual column method to the two example actinides are displayed, while the considerations in method design and the required conditions are discussed.

Du, Miting↗
DOE OSTI2024

Variation of the Passive Film on Compositionally Concentrated Dual-Phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 and Implications for Corrosion

The passive film on a dual-phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 FCC + Heusler (L2 1 ) compositionally concentrated alloy formed during extended exposure to an applied potential in the passive range in dilute chloride solution was characterized. Each phase, with its own distinct composition of passivating elements, formed unique passive films separated by a heterophase interface. High-resolution, surface sensitive characterization enabled chemical analysis of the passive film formed over individual phases. The film formed over the L2 1 phase had a higher concentration of Al, Ni, and Ti, while the film formed over FCC phase was of similar thickness but contained comparatively higher Cr, Fe, and Mo concentrations, consistent with the differences in bulk microstructure composition. The passive film was continuous across phase boundaries and the distribution of passivating elements (Al, Cr, and Ti) indicated both phases were independently passivated. Spatially resolved analysis of the surface chemistry of the dual-phase CCA revealed that the cation with the highest composition in passive film formed on the FCC phase was Cr (52.4 at. pct) and for the L2 1 phase was Ti (53.1 at. pct) despite the bulk concentration of each element being below 20 at. pct in their respective phases. Al, Cr, and Ti were enriched in both phases within the passive film relative to their respective bulk compositions. In parallel studies, single-phase alloys with compositions representative of the FCC and L2 1 phases were synthesized to evaluate the corrosion behavior of each phase in isolation. The corrosion behavior of the dual-phase alloy showed passivity evidenced by a pitting potential of 0.615 V SCE in 0.01 M NaCl. The pitting potential and other electrochemical parameters suggested a combination of behaviors of both single-phase samples, suggesting that the global corrosion behavior may be represented by a composite theory applied to phases, their area fractions, and interphase length. However, the interphase in the dual-phase CCA was a local corrosion initiation site and may limit localized corrosion protectiveness. The alloy design implications for optimization of second phase structure and morphology are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

How reliable is distribution of relaxation times (DRT) analysis? A dual regression-classification perspective on DRT estimation, interpretation, and accuracy

The distribution of relaxation times (DRT) has gained increasing attention and adoption in recent years as a versatile method for analyzing electrochemical impedance spectroscopy (EIS) data obtained from complex devices like fuel cells, electrolyzers, and batteries. The DRT deconvolutes the impedance without a priori specification of a generative model, which is especially useful for interpretation and model selection when the governing principles of the system under study are not fully understood. However, DRT estimation is an ill-posed inversion problem that must be addressed with a subjective choice of regularization and tuning, which leaves substantial risk of misleading interpretations of EIS data. In this work, we suggest a new classification view of the DRT inversion to clarify DRT estimation and interpretation. We introduce a dual regression-classification framework that unifies the classification and regression views of the DRT inversion with wide-reaching implications for DRT analysis. The dual framework is employed to demonstrate a new kind of DRT inversion algorithm and develop novel evaluation metrics that capture previously ignored aspects of DRT accuracy. These approaches are applied to both synthetic data and experimental spectra collected from a protonic ceramic fuel cell and a lithium-ion battery to illustrate their broad utility. The dual inversion algorithm shows promising performance for accurate DRT estimation and autonomous model identification, while the dual evaluation approach produces metrics that meaningfully assess the strengths and risks of DRT algorithms. Here this work provides valuable insight for both practical application of the DRT to experimental data and further development of EIS analysis methods.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dual-scale folding in cutting of commercially pure aluminum alloys

We examine a, hitherto, little-studied and curious machining chip morphology, with tell-tale signs of folding at two different length scales, that is common in cutting of certain ductile and highly strain-hardening metals like soft aluminum alloys, tantalum and niobium. This chip morphology does not appear in the usual catalogues of common chip types. The mechanics of formation of the “dual-scale folded chip” is studied in model material systems of commercially pure aluminum alloys (AA 1100 and AA 8040), that prominently exhibit this chip morphology. The flow, folding and associated plastic instabilities are investigated using micro/macro structure observations of the chip in a plane-strain cutting framework, with high-speed in situ imaging and image analysis of material flow; and force measurements. The smaller-scale folding is shown to develop in the primary deformation zone while the larger-scale folding occurs as the chip traverses the rake face of the tool. The resulting chip is composed of irregularly-spaced large folds, superimposed onto which are the quasi periodic small folds. The representative wavelengths of the two folds differ on average by an order of magnitude, 0.1 mm vs. 2 mm. The observations reveal a direct coupling between the material flow and chip morphology, and how specific attributes of the dual-scale folded chip arise from the flow mechanism. Plastic buckling is found to play a key role in the folding at both length scales. The small-scale folds are characteristic of a sinuous plastic flow mode, while the large-scale folding is characterized by buckling and stick-slip along the tool rake face, triggered by adhesive pinning of the chip to the tool. Important consequences of the dualscale folding are very large cutting forces, and force oscillations of large amplitude, despite the alloys being very soft, only ~ 25 HV. Here, the dual-scale folding is why many of these alloys are classified as “gummy” to machine. Since the dual-scale folded chip is associated with large cutting forces and poor surface quality, there is much to be gained by disrupting this flow type in practical machining applications. Methods for controlling the folding to improve machining performance with the gummy alloys are briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

On the resolution of dual readout calorimeters

Dual readout calorimeters allow state-of-the-art resolutions for hadronic energy measurements. Their various incarnations are leading candidates for the calorimeter systems for future colliders. In this paper, we present a simple formula for the resolution of a dual readout calorimeter, which we verify with a toy simulation and with full simulation results. This formula can help those new to dual readout calorimetry understand its strengths and limitations. The paper also highlights that the dual readout correction works not just to compensate for binding energy loss, but also for energies escaping the calorimeter or clustering algorithm. Formulae are also presented for approximate resolutions and energy scales in terms of different sources of response.

Calorimeters↗
DOE OSTI2025

Noble-Metal-Free, Nickel-Based Dual Functional Materials for Improved Methane Production from In Situ Carbon Dioxide Capture and Conversion

Promoters for dual functional materials have not been well explored, but promoters could improve the efficiency of the process by improving the selectivity of the CO 2 methanation process. Utilizing integrated capture and conversion, where CO 2 is captured and converted to useful products, would allow for a useful avenue to control CO 2 emissions. One such way to accomplish this would be to utilize materials that can both capture and convert CO 2 to useful products. However, these materials are often based on costly noble metals, like ruthenium and platinum, decreasing their viability on an industrial scale. Less expensive metals, for example, nickel, would allow for dual functional materials to be more readily utilized in industrial settings. Nickel-based dual functional materials often do not react with the captured CO 2 and merely desorb the CO 2 rather than form a useful product. However, promoters have not been well explored for these types of materials to improve the catalytic properties, which would be beneficial to improve nickel-based materials. Herein, we report the addition of ytterbium on a nickel-based dual functional material and the improvements to the production of methane from captured CO 2 with the incorporated ytterbium promoter. The ytterbium promoter improves the selectivity of the catalysts for the hydrogenation of captured CO 2 to methane and increases the ability for the material to capture CO 2 due to additional basic sites being formed on the surface of alumina. As a result, the 12%Ni/4%Yb/6%Na 2 O/Al 2 O 3 catalyst was utilized to capture carbon dioxide and then convert the captured CO 2 to methane over five cycles, where both the amount captured and the amount converted remained stable, indicating the stability of the material over long-term use.

Catalysts↗