SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Global Data-Driven Determination of Baryon Transition Form Factors

Hadronic resonances emerge from strong interactions encoding the dynamics of quarks and gluons. The structure of these resonances can be probed by virtual photons parametrized in transition form factors. Here, in this study, twelve N* and Δ transition form factors at the pole are extracted from data with the center-of-mass energy from πN threshold to 1.8 GeV, and the photon virtuality 0 ≤ Q 2 /GeV 2 ≤ 8. For the first time, these results are determined from a simultaneous analysis of more than one state, i.e., ~10 5 π⁢N, η⁢N, and K⁢Λ electroproduction data. In addition, about 5×10 4 data in the hadronic sector as well as photoproduction serve as boundary conditions. For the Δ⁡(1232) and N⁡(1440) states our results are in qualitative agreement with previous studies, while the transition form factors at the poles of some higher excited states are estimated for the first time. Realistic uncertainties are determined by further exploring the parameter space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

First Determination of the Spin-Parity of Ξ c ( 3055 ) + , 0 Baryons

The Ξ b 0 ( − ) → Ξ c ( 3055 ) + ( 0 ) ( → D + ( 0 ) Λ ) π − decay chains are observed, and the spin-parity of Ξ c ( 3055 ) + ( 0 ) baryons is determined for the first time. The measurement is performed using proton-proton collision data at a center-of-mass energy of s = 13 TeV , corresponding to an integrated luminosity of 5.4 fb − 1 , recorded by the LHCb experiment between 2016 and 2018. The spin-parity of the Ξ c ( 3055 ) + ( 0 ) baryons is determined to be 3 / 2 + with a significance of more than 6.5 σ ( 3.5 σ ) compared to all other tested hypotheses. The up-down asymmetries of the Ξ b 0 ( − ) → Ξ c ( 3055 ) + ( 0 ) π − transitions are measured to be − 0.92 ± 0.10 ± 0.05 ( − 0.92 ± 0.16 ± 0.22 ), consistent with maximal parity violation, where the first uncertainty is statistical and the second is systematic. These results support the hypothesis that the Ξ c ( 3055 ) + ( 0 ) baryons correspond to the first D -wave λ -mode excitation of the Ξ c flavor triplet. © 2025 CERN, for the LHCb Collaboration 2025 CERN

Aaij, R.↗

DOE OSTI2025

Magnetic structure determination of multiple phases in the multiferroic candidate GdCrO 3

Due to their potential applications in low-power consumption and/or multistate memory devices, multiferroic materials have attracted a lot of attention in the condensed matter community. As part of the effort to identify new multiferroic compounds, perovskite-based GdCrO 3 was studied in both bulk and thin film samples. A strong enhancement of the capacitance in a field suggested ferroelectric behaviour but significant leakage and no well developed P–E hysteresis loops were observed. Measurements clearly indicate the existence of a polar phase but only below 2 K (likely connected to Gd ordering). Here the determination of the magnetic structure through neutron diffraction collected on an isotopic 160 GdCrO 3 sample at the WISH diffractometer at ISIS is reported. The presence of three successive magnetic phases as a function of temperature (commensurate, spin re-orientation and incommensurate phases once the Gd order), previously only seen by magnetization, is confirmed. Using the most recent guidelines for reporting the determined structures, we highlight the benefits of using such nomenclature for discussing physical properties and consider possible mechanisms and couplings that led this seemingly rather isotropic system to display the complex structures observed.

incommensurate magnetic structure↗

DOE OSTI2025

Identification Uncertainty in Inverse Material Model Parameter Determination: A Sensitivity‐Based Decision Process for Load Path Selection

This research proposes a sensitivity-based framework for selecting the optimal prescribed loading path for a biaxial cruciform specimen. Optimality here is determined by the direction and magnitude of the prescribed displacement that minimizes the influence of random noise on the material model parameter identification. Using simulated experimental data based on finite element simulation, in this work, we identify the material model parameters of a Ludwik hardening model and plane stress implementation of the Hill-48 yield criterion using finite element model updating (FEMU). Our analysis reveals that the identification (or estimator) uncertainty of model parameters depends on the displacement boundary conditions (i.e., loading sequence) and the ground-truth value of the individual parameters. Optimal experimental design (OED) criteria based on the Fisher information matrix were investigated to mitigate indecision in the choice of optimal load path when the identification uncertainty of different material model parameters optimized at different load paths. The determinant of the Fisher information matrix was chosen here as the more useful metric due to its ability to capture uncertainty of the most influential material model parameters. The proposed framework demonstrates potential for real-time automated load step selection using scalar criteria derived prior to mechanical loading. The framework can be generalized to other geometries, boundary conditions and material models, allowing this procedure to be utilized for different experimental configurations and materials.

Fayad, Samuel S. [University of Illinois at Urbana↗

DOE OSTI2025

Comparative transcriptomics uncovers poplar and fungal genetic determinants of ectomycorrhizal compatibility

Ectomycorrhizal symbiosis supports tree growth and is crucial for nutrient cycling and temperate and boreal ecosystems functioning. The establishment of functional ectomycorrhiza (ECM) first requires the association of compatible partners. However, host and fungal genetic determinants governing mycorrhizal compatibility are unknown. To identify such factors in poplar and its fungal associates, we mined existing and de novo tree and fungal transcriptional datasets. We identified co-expressed genes enabling ECM symbiosis at early and mature stages of the interaction. These sets of genes can be divided into general fungal-sensing and ECM-specific components. We highlight the importance of fungal modulation of plant JA-related defenses and the regulation of secretory pathways for ECM compatibility, including upregulation of key fungal small secreted proteins, the downregulation of plant secreted peroxidases, and the downregulation of plant cell wall remodeling proteins concomitantly with the upregulation of fungal glycosyl hydrolases acting on pectin. Not only gene regulation, but also its temporal scale and dynamics seem to play a crucial role for mycorrhizal compatibility. The expression profile of the host Common Symbiosis Pathway and nutrient transporters was also studied, revealing constitutive levels of expression and moderate upregulation in compatible ECM interactions. Overall, these results underscore the importance of novel biological functions during the establishment of ECM symbiosis, help us gain insights into the molecular events determining mycorrhiza compatibility, and serve as a data-rich transcriptomic resource to open new research questions in the field.

Marqués‐Gálvez, José Eduardo↗

DOE OSTI2024

CONSTRAINT-INDEPENDENT CONSTANT CTOA DETERMINATION FOR DUCTILE STABLE CRACK GROWTH

Crack tip opening angle (CTOA) has been used as a reliable fracture toughness parameter for decades to characterize stable ductile crack growth for thin-walled aerospace structures in the low-constraint conditions. Recently, the CTOA parameter was also applied to the pipeline industry, and a CTOA test standard ASTM E3039 was thus developed for testing a critical constant CTOA. Research showed that the constant CTOA can reasonably describe fracture toughness required to arrest a dynamic crack propagation for a modern gas pipeline. However, the CTOA fracture criterion requires constraint-independent CTOA toughness against stable ductile crack growth. ASTM E3039 recommends a drop weight tearing test (DWTT) specimen for CTOA testing. Since a shallow crack is used, DWTT measured CTOA may depend on constraint level at the crack tip. To understand if it is the case, this paper evaluates the critical CTOA for a set of fracture toughness tests on single edge notched bend (SENB) specimens with shallow and deep cracks based on four CTOA estimation models. In which, the Ln(P)-LLD linear fit model is similar to that used by ASTM E3039 in the CTOA calculation. Fracture test data for X80 pipeline steel and HY80 structural steel are considered in the CTOA evaluation. The results show that the four CTOA models can determine a crack size-independent constant CTOA over stable ductile crack growth for the SENB specimens. As a result, CTOA determined by ASTM E3039 is constraintindependent and transferable to use for an actual crack propagating in a gas pipeline.

Zhu, Xian-Kui↗

DOE OSTI2024

Bactericidal effectors of the Stenotrophomonas maltophilia type IV secretion system: functional definition of the nuclease TfdA and structural determination of TfcB

ABSTRACT Stenotrophomonas maltophilia expresses a type IV protein secretion system (T4SS) that promotes contact-dependent killing of other bacteria and does so partly by secreting the effector TfcB. Here, we report the structure of TfcB, comprising an N-terminal domain similar to the catalytic domain of glycosyl hydrolase (GH-19) chitinases and a C-terminal domain for recognition and translocation by the T4SS. Utilizing a two-hybrid assay to measure effector interactions with the T4SS coupling protein VirD4, we documented the existence of five more T4SS substrates. One of these was protein 20845, an annotated nuclease. A S. maltophilia mutant lacking the gene for 20845 was impaired for killing Escherichia coli , Klebsiella pneumoniae , and Pseudomonas aeruginosa . Moreover, the cloned 20845 gene conferred robust toxicity, with the recombinant E. coli being rescued when 20845 was co-expressed with its cognate immunity protein. The 20845 effector was an 899 amino-acid protein, comprised of a GHH-nuclease domain in its N-terminus, a large central region of indeterminant function, and a C-terminus for secretion. Engineered variants of the 20845 gene that had mutations in the predicted catalytic site did not impede E. coli , indicating that the antibacterial effect of 20845 involves its nuclease activity. Using flow cytometry with DNA staining, we determined that 20845, but not its mutant variants, confers a loss in DNA content of target bacteria. Database searches revealed that uncharacterized homologs of 20845 occur within a range of bacteria. These data indicate that the S. maltophilia T4SS promotes interbacterial competition through the action of multiple toxic effectors, including a potent, novel DNase. IMPORTANCE Stenotrophomonas maltophilia is a multi-drug-resistant, Gram-negative bacterium that is an emerging pathogen of humans. Patients with cystic fibrosis are particularly susceptible to S. maltophilia infection. In hospital water systems and various types of infections, S. maltophilia co-exists with other bacteria, including other pathogens such as Pseudomonas aeruginosa . We previously demonstrated that S. maltophilia has a functional VirB/D4 type VI protein secretion system (T4SS) that promotes contact-dependent killing of other bacteria. Since most work on antibacterial systems involves the type VI secretion system, this observation remains noteworthy. Moreover, S. maltophilia currently stands alone as a model for a human pathogen expressing an antibacterial T4SS. Using biochemical, genetic, and cell biological approaches, we now report both the discovery of a novel antibacterial nuclease (TfdA) and the first structural determination of a bactericidal T4SS effector (TfcB).

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Toward Establishing Uniqueness of Experimentally Determined Transference Numbers

The passage of current through a battery results in the development of concentration gradients in the electrolytic phase. For a fully characterized binary electrolyte, where the conductivity, salt diffusion coefficient, cation transference number, and the thermodynamic factor are known, concentration and potential gradients in the electrolytic phase can be modeled using Newman’s concentrated solution theory. We report two methods for measuring the transference number: the standard method based on electrochemical measurements ( t + , echem 0 ) and electrophoretic NMR ( t + , eNMR 0 ). The electrochemical approach requires combining measurements from multiple experiments; the equations used to determine the cation transference number and the thermodynamic factor are coupled, nonlinear algebraic equations. In the electrophoretic-NMR-based approach, however, the equations used to determine the cation transference number and the thermodynamic factor are decoupled. We find for a liquid electrolyte comprised of a lithium salt dissolved in tetraglyme, the values of the transference numbers obtained by these two methods are distinct. For example, at 30 °C, t + , echem 0 = −1.02 ± 1.11 and t + , eNMR 0 = 0.25 ± 0.04. The corresponding thermodynamic factors are also different. While the magnitude of the predicted concentration gradients based on the two sets of parameters are different, the predicted current-voltage relationships are similar.

Hickson, Darby T. (ORCID:0000000251339755)↗

DOE OSTI2026

Evaluation of sucrose crystallization kinetics using confocal microscopy: Determining differences in sucrose crystallization kinetics between single and polycrystal studies

Sucrose solution crystal growth kinetics are dependent on temperature, concentration, and impurities. A double polarized confocal microscopy system was used to obtain photographs with high contrast between growing crystals and the background for color background removal image processing. Seeded solutions of 72 wt% sucrose at 27, 35, 45, and 55°C were compared for single and polycrystals. Polycrystal analysis was determined to offer more rapid image processing and to be more applicable to systems in real operating conditions, while single-crystal analysis was determined to give more comprehensive descriptions of individual crystal behavior at the cost of slower processing.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Determination of Vibrational Motions Driving Photoinduced Electron Transfer Reactions in Molecular Crystals and Organic Thin Films

The objective of this research is to develop an understanding of how nuclear motions can be used to drive and control photo-induced charge transfer and singlet fission reactions in molecular crystals and thin films. By following the structural evolution of reacting molecules and nanostructures on the timescale of their nuclear motion, we will determine what interplay of nuclear coordinates is most efficient in driving electron transfers, a necessary first step in most photovoltaic and photocatalytic processes. We will identify which nuclear coordinates effectively promote desirable electron transfer processes, or ineffectively dissipate photon energy into unwanted thermal energy, thus guiding the design and implementation of molecular systems tailored for high efficiency processes. Specifically, we aim to identify which nuclear coordinates are responsible for driving electron transfer and singlet fission reactions at different points along the reaction coordinate, particularly in regimes which deviate from Marcus theory predictions. We will do so by investigating systems with electron transfer and singlet fission occurring from non-thermalized states due to strong donor-acceptor electronic coupling. First, we will prove that specific vibrational modes are responsible for charge transfer processes in molecular crystals. Secondly, we will investigate how vibrational coherences and specific nuclear motions can be used to drive high yield singlet fission processes. Finally, we will determine how complex film morphology affects long-range charge transport, a key limiting factor in our ability to make gains in efficiency.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Technical Basis for Proposed Changes to DOE-STD-1194-2019, Nuclear Material Attractiveness Determination and Categorization

The Department of Energy (DOE)’s Technical Standard DOE-STD-1194-2019 (dated September 2019), Nuclear Materials Control and Accountability, provides key guidance for the determination of Special Nuclear Material (SNM) attractiveness levels. Attractiveness levels are a key component in the security categorization of SNM processed, used, and stored at DOE facilities. Upon review, the writing team identified specific components relating to the determination of attractiveness levels that could be modified to improve clarity, reduce burden on sites, and/or better align with the graded safeguards principle that is central to the DOE’s nuclear security program. The report outlines the original verbiage, issues with implementation of that verbiage, proposed new verbiage, and the expected benefits thus serving as the technical basis for the proposed changes.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2024

Determining Exact RANS Operators with the Macroscopic Forcing Method (Final Report)

This report contains a compilation of key results and findings from the ACT project “Determining Exact RANS Operators with the Macroscopic Forcing Method.” The Macroscopic Forcing Method (MFM), a numerical tool for determining closure operators, is used to measure eddy diffusivity moments in Rayleigh-Taylor (RT) instability. It is first applied to low-Atwood 2D RT instability; that work is then extended to 3D RT at different finite Atwood numbers. It is found that nonlocality is important for modeling the mean scalar transport closure operator in RT mixing. Additionally, work is done to improve the statistical convergence of MFM for chaotic problems like RT mixing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Characterization of Tank 15H Sample in Support of Preliminary Cease Waste Removal and Closure Mode Determination

The Savannah River National Laboratory (SRNL) was requested by Savannah River Mission Completion (SRMC) to provide sample preparation and analysis of Tank 15H characterization samples. These samples follow an interest in exploring avenues to condense the extensive sampling of the Tank Closure process. One such pathway would be to collect a sample during an earlier waste removal campaign for analysis to determine comparability to the later residual tank inventory determined through Residual Material sampling and characterization prior to grouting. Six Tank 15H samples (HTF-15-24-9, HTF- HTF-15-24-10, HTF-15-24-11, HTF-15-24-12, HTF15-24-13, and HTF-15-24-14) were delivered to SRNL in May of 2024. These six Tank 15H samples were taken as close as possible to the solids layer of the Tank 15H. These six Tank 15H samples were combined to form one composite sample for characterization due to the lack of sufficient solids fraction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

Determining Magnetic Field Directions and Omni-directional Fluxes of Particles from STPSat-6 ZPS Plasma Measurements

This report summarizes our recent data derivation efforts on STPSat-6 ZPS plasma measurements, presenting final outcomes. We begin by outlining the methodology developed to determine local magnetic field directions from measured directional intensities of ~20 keV ions, leveraging symmetry in particles’ pitch-angle distributions, and the determined field directions over a storm period are shown with errors analyzed through comparison with NOAA GOES measurements. Next, we further assess the validity of the method and quantify its overall high performance while acknowledging certain caveats. Finally, given local magnetic field directions and ZPS data, we explain how omni-directional fluxes of particles can be derived from ZPS measurements with limited directional coverage, and estimate the related errors under several theoretical scenarios. The methods developed in this study can be applied for processing and augmenting ZPS data for the next, and the insights gained here can also inform instrument design in the future.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

VA Determinants of Health Data Curation Documentation FY25-Q2

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Determinants of Health (EDH) project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, ‘standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Ratio of 1,275 and 186 keV Gamma Ray Count Rates for Age Determination of Material in UF 6 Cylinders

In this work, a method for using ratios of passive gamma ray measurements to determine the time since the filling of UF 6 cylinders was explored. This method uses the 186 keV gamma ray emitted by 235 U and the 1,275 keV gamma ray that results from interactions of alpha particles in fluorine. Studies were made using MCNP models of both 30B cylinders and smaller 5A cylinders. Results indicate that for enrichments at or above that of natural uranium, this approach may provide a method for determining age up to 10 years or identifying whether the age is greater than 10 years, even if the uranium enrichment is unknown. The calculated results show the same behavior as the results of a recent measurement campaign, indicating the possibility of using this method for real-world cylinders.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

VA Determinants of Health Data Curation Documentation FY25-Q3

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

VA Community Determinants of Health Data Curation Documentation FY25-Q4

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Determinants of Health (EDH) project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

97 MATHEMATICS AND COMPUTING↗