Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Debye Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Spectral lines behavior of Be I and Na I isoelectronic sequence in Debye plasma environment

We report the plasma screening effect on the first ionization potential (IP) and [He]2s{sup 2} ({sup 1}S{sub 0}){yields}[He]2s2p/2s3p allowed ({sup 1}P{sub 1}) and inter-combination transitions ({sup 3}P{sub 1}) in some selected Be-like ions. In addition, we investigate the spectral properties of [Ne]3s ({sup 2}S{sub 1/2}){yields}[Ne]np ({sup 2}P{sub 1/2} and {sup 2}P{sub 3/2} for n = 3, 4) transitions in Ca X and Fe XVI ions (Na I isoelectronic sequence) and [He]3s({sup 2}S{sub 1/2}){yields}[He]np ({sup 2}P{sub 1/2} and {sup 2}P{sub 3/2} for n = 2, 3) transitions in Li, B II, and N IV (Li I isoelectronic sequence) under plasma environment. The state-of-the-art relativistic coupled cluster calculations using the Debye model of plasma for electron-nucleus interaction show that (a) the ionization potential decreases sharply with increasing plasma strength and (b) the gap between the [He]2s{sup 2} ({sup 1}S{sub 0}){yields}[He]2s2p({sup 1,3}P{sub 1}) energy levels increases with increasing plasma potential and nuclear charge. It is found that the [He]2s{sup 2} ({sup 1}S{sub 0}){yields}2s3p ({sup 1,3}P{sub 1}) transition energy decreases uniformly with increasing plasma potential and nuclear charge. In other words, the spectral lines associated with 2s-2p (i.e., {Delta}n=0, where n corresponds to principle quantum number) transitions in Be I isoelectronic sequence exhibit a blue-shift (except for Be I, B II, and the lowest inter-combination line in C III, which exhibit a red-shift), whereas those associated with 2s-3p (i.e., {Delta}n{ne}0) transitions are red-shifted. Similar trend is observed in Li I and Na I isoelectronic sequences, where spectral lines associated with {Delta}n=0 ({Delta}n{ne}0) are blue-shifted (red-shifted). The effect of Coulomb screening on the spectral lines of ions subjected to plasma is also addressed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Magneto-Electronic, Thermodynamic, and Thermoelectric Properties of 5f-Electron System BaBkO{sub 3}

In the present work, the structural, electronic, magnetic, mechanical, thermodynamic, and thermoelectric properties of cubic perovskite BaBkO{sub 3} were investigated within the framework of density functional theory using generalized gradient approximation, onsite Coulomb interaction, and modified Becke-Johnson methods. BaBkO{sub 3} is stable in the ferromagnetic phase with a magnetic moment of 7 μ{sub B}. The spin-polarized electronic band structure reveals 100% spin polarization of the material with metallic character in spin-up state and semiconducting in spin-down state. Pugh and Cauchy relation displays that the material is highly ductile. The quasi-harmonic Debye model was used to determine the thermodynamic properties of BaBkO{sub 3} under high pressure and temperature. BaBkO{sub 3} presents high value of Seebeck coefficient and power factor at room temperature with a value of 135 μVK{sup − 1} and 1.5 × 10{sup 12}μWcm{sup − 1} K{sup − 2} s{sup − 1}, respectively. The possession of half metallicity and high Seebeck coefficient makes BaBkO{sub 3} suitable for spintronic and thermoelectric device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of High Pressure and Temperature on Magneto-Electronic, Thermodynamic, and Transport Properties of Antiferromagnetic HoPdX (X = As, Ge) Alloys

We present electronic, magnetic, thermoelectric, and thermodynamic properties of half-Heusler HoPdAs and HoPdGe materials in stable α-phase. They crystallize in cubic MgAgAs-type structure. The stable phase is found to be antiferromagnetic in comparison to the other magnetic and nonmagnetic states. The electronic structure calculations display the metallic behavior in both spin states. The effect of pressure and temperature on unit cell volume, thermal expansion coefficient, heat capacity, and Grüneisen parameter have also been analyzed using the quasi-harmonic Debye model. The alloys present a high absolute Seebeck coefficient with a value of 203.26 μV/K for HoPdAs and 53.19 μV/K for HoPdGe at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat capacity and thermal expansion of icosahedral lutetium boride LuB66

The experimental values of heat capacity and thermal expansion for lutetium boride LuB66 in the temperature range of 2-300 K were analysed in the Debye-Einstein approximation. It was found that the vibration of the boron sub-lattice can be considered within the Debye model with high characteristic temperatures; low-frequency vibration of weakly connected metal atoms is described by the Einstein model.

36 MATERIALS SCIENCE↗

Theoretical predictive screening of noble-metal-containing M 3 AuC 2 (M = Ti, V, and Cr) MAX phases

Using first-principles density functional theory (DFT), the ground state physical properties of the newly synthesized noble-metal-containing Ti 3 AuC 2 MAX phase have been investigated. The effect of transition-element Ti replacement (V and Cr) on physical properties, including structural, elastic, electronic, thermal, and optical are presented. The optimized lattice parameters of Ti 3 AuC 2 MAX phase are in good agreement with the experimental values and decrease when we replace Ti with V and then Cr. The magnetic properties of M 3 AuC 2 are predicted by using generalized gradient approximation (GGA) incorporating onsite electron correlation parameter (Hubbard U parameter) within DFT. Out of three studied MAX phases, V 3 AuC 2 and Cr 3 AuC 2 phases exhibit magnetism. The thermodynamical stability of M 3 AuC 2 (M = Ti, V, and Cr) phases is discussed by the formation enthalpy with respect to their most competing phases. The electronic structure reveals that these phases have metallic nature and are electrically anisotropic. The M-element replacement has an effect on the bonding properties of M 3 AuC 2 . The bonding between M-C is in the order of Cr 3 AuC 2 > V 3 AuC 2 > Ti 3 AuC 2 according to their peak positions and heights of density of states in the occupied site, which is also confirmed from the charge density distribution. The elastic properties indicate that M 3 AuC 2 phases are ductile, machinable, less stiff, and better resistant to thermal shock and are elastically anisotropic. To understand the properties of M 3 AuC 2 for the extreme environment, we employed a quasi-harmonic Debye model at the pressure and temperature range of 0–50 GPa and 0–1600 K, respectively. Additionally, we evaluated thermal conductivity and melting temperature to further understand the potential of these MAX phases in coating applications at elevated temperature. In relation to optical properties, these MAX phases have a reasonable absorption coefficient in the visible as well as in the ultra-violet regions. The reflectivity of M 3 AuC 2 phases is polarization dependent and of 45 % against the visible region, which reveals its potential as coating material to minimize solar heating.

312 MAX phases↗

Structural and thermodynamic effects of hydration in Na-zeolite A (LTA) from low-temperature heat capacity

Zeolite A (Linde Type A; LTA) is an industrially important porous mineral that has recently been shown to exhibit framework flexibility upon changes in hydration level. Here, to investigate the flexibility transition from a thermodynamic perspective, we have performed heat capacity measurements on sodium zeolite A at seven incremental hydration levels ranging from zero to equilibrium with ambient air. Excess low-frequency vibrations beyond the predictions of the Debye model are found in all samples, and the frequency of these vibrations increases as a function of hydration level. This suggests that an increase in hydration causes a decrease in at least one type of framework flexibility for sodium zeolite A. In addition, a subtle excess heat capacity contribution from 150 to 280 K is observed only for low and intermediate hydration levels, which may arise from a transformation tied to framework flexibility previously observed in zeolite A via gas absorption calorimetry. Values of the standard thermodynamic functions C p,m °, Δ 0 T S m °, Δ 0 T H m °, and Φ m ° are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heat capacity, enthalpy and entropy of ternary bismuth tantalum oxides

Heat capacity and enthalpy increments of ternary bismuth tantalum oxides Bi{sub 4}Ta{sub 2}O{sub 11}, Bi{sub 7}Ta{sub 3}O{sub 18} and Bi{sub 3}TaO{sub 7} were measured by the relaxation time method (2-280 K), DSC (265-353 K) and drop calorimetry (622-1322 K). Temperature dependencies of the molar heat capacity in the form C{sub pm}=445.8+0.005451T-7.489x10{sup 6}/T{sup 2} J K{sup -1} mol{sup -1}, C{sub pm}=699.0+0.05276T-9.956x10{sup 6}/T{sup 2} J K{sup -1} mol{sup -1} and C{sub pm}=251.6+0.06705T-3.237x10{sup 6}/T{sup 2} J K{sup -1} mol{sup -1} for Bi{sub 3}TaO{sub 7}, Bi{sub 4}Ta{sub 2}O{sub 11} and for Bi{sub 7}Ta{sub 3}O{sub 18}, respectively, were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S{sup o}{sub m}(298.15 K)=449.6{+-}2.3 J K{sup -1} mol{sup -1} for Bi{sub 4}Ta{sub 2}O{sub 11}, S{sup o}{sub m}(298.15 K)=743.0{+-}3.8 J K{sup -1} mol{sup -1} for Bi{sub 7}Ta{sub 3}O{sub 18} and S{sup o}{sub m}(298.15 K)=304.3{+-}1.6 J K{sup -1} mol{sup -1} for Bi{sub 3}TaO{sub 7}, were evaluated from the low-temperature heat capacity measurements. -- Graphical Abstract: Temperature dependence of {Delta}{sub ox}C{sub pm} for bismuth tantalum mixed oxides. Display Omitted Research highlights: > Heat capacity, enthalpy and entropy of ternary bismuth tantalum oxides Bi{sub 4}Ta{sub 2}O{sub 11}, Bi{sub 7}Ta{sub 3}O{sub 18} and Bi{sub 3}TaO{sub 7}. > Heat capacity by DSC calorimetry and heat-pulsed calorimetry. > Enthalpy increments by drop calorimetry. > Einstein-Debye model for low-temperature dependence of the heat capacity. > Application of Neumann-Kopp rule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical investigations of the physical properties of zircon-type YVO{sub 4}

The crystal structure, electronic properties, elastic properties, hardness and thermodynamic properties of the laser host material zircon-type YVO{sub 4} are studied using the pseudopotential plane wave method within the local density approximation (LDA) and generalized gradient approximation (GGA). The calculated ground state values such as lattice parameter, bulk modulus and its pressure derivative, the band structure and densities of states were in favorable agreement with previous works and the existed experimental data. The elastic constants C{sub ij}, the aggregate elastic moduli (B, G, E), Poisson's ratio and elastic anisotropy have been investigated. In YVO{sub 4}, V-O bonds with shorter bond length and larger Mulliken population make great contribution to hardness than Y-O bonds. Using quasi-harmonic Debye model considering the phonon effects, bulk modulus, heat capacity and thermal expansion coefficient of YVO{sub 4} are calculated within a range of 0-6 GPa and 0-1200 K. - Graphical Abstract: (a) Directional dependence of Young's modulus in zircon-type YVO{sub 4} and (b) projections of the directional dependent Young's modulus in different planes for zircon-type YVO{sub 4}. The units are in GPa. Highlights: Black-Right-Pointing-Pointer This paper systematically studied the physical properties of zircon-type YVO{sub 4} from first-principles calculations. Black-Right-Pointing-Pointer Zircon-type YVO{sub 4} is mechanically stable and it is ductile for B/G>1.75 and v>0.26. Black-Right-Pointing-Pointer Universal elastic anisotropy index A{sup U} for zircon-type YVO{sub 4} is 2.41, so YVO{sub 4} is anisotropic. Black-Right-Pointing-Pointer V-O bonds with shorter bond length and larger Mulliken population make greater contribution to the hardness of YVO{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles investigation of the thermo-physical properties of Ca{sub 3}Si{sub 4}

The first-principles calculations were applied to investigate the thermo-physical properties of Ca{sub 3}Si{sub 4} compound with increasing pressure. Those properties are based on density functional theory (DFT) method within the generalized gradient approximation (GGA) and local density approximation (LDA) for exchange and correlation. The optimized lattice constant and formation enthalpy are in good agreement with the experimental data and other theoretical data available. The calculated band structures confirm that Ca{sub 3}Si{sub 4} is a semiconductor with an indirect band gap of 0.363 eV (GGA) and 0.311 eV (LDA) at 0 GPa, and the calculated band gap decreased with the increasing pressure. The elastic constants, elastic anisotropy, elastic moduli and Poisson's ratio of Ca{sub 3}Si{sub 4} have also been obtained under high pressures. The Debye temperature, heat capacity, coefficient of thermal expansion and Grueneisen parameter have also been calculated in the quasiharmonic Debye model. - Graphical abstract: The Partial Density of States and Band Structure of Ca{sub 3}Si{sub 4}. Highlights: Black-Right-Pointing-Pointer The thermo-physical properties of Ca{sub 3}Si{sub 4} have been investigated. Black-Right-Pointing-Pointer Ca{sub 3}Si{sub 4} is a semiconductor with an indirect band gap. Black-Right-Pointing-Pointer The mechanical properties of Ca{sub 3}Si{sub 4} have been studied. Black-Right-Pointing-Pointer The heat capacity and thermal expansion have been obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical properties of madocite: A quaternary chalcogenide with very low thermal conductivity

The madocite Pb{sub 17}(Sb{sub 0.75}As{sub 0.25}){sub 16}S{sub 41} was synthesized by reaction of binary compounds and densified using hot pressing. The optical band-gap, thermal stability, and temperature-dependent heat capacity and thermal conductivity are reported for the first time. The thermal properties are evaluated using the Debye model. The findings in this work lay the foundation for a more detailed understanding of the physical properties of this material, and is part of the continuing effort in investigating materials with new compositions that possess low thermal conductivity for potential low-cost thermal barrier coating and energy-related applications. - Graphical abstract: The report describes the synthesis and physical properties characterization of Pb{sub 17}(Sb{sub 0.75}As{sub 0.25}){sub 16}S{sub 41}, a quaternary chalcogenide with the madocite crystal structure that possesses a low thermal conductivity, for the first time. The compositions was synthesized by reaction of binary compounds and densified using hot pressing. Optical band-gap, thermal stability, and temperature-dependent heat capacity measurements are also discussed. - Highlights: • Pb{sub 17}(Sb{sub 0.75}As{sub 0.25}){sub 16}S{sub 41} was synthesized by reaction of binary compounds and densified using hot pressing. • We report the characterizations of this quaternary chalcogenide that possesses a low thermal conductivity for the first time. • The optical band-gap, thermal stability, and temperature-dependent heat capacity are also investigated for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of mechanical, thermodynamic, and thermoelectric properties of ferromagnetic SrFe{sub 4}As{sub 12} skutterudite

In the present work, the electronic, mechanical, thermal and thermoelectric properties of Sr-filled skutterudite have been investigated in the framework of density functional theory. SrFe{sub 4}As{sub 12} shows a ferromagnet character with a magnetic moment of 1.76 μ{sub B} at an optimized lattice parameter of 8.38 Å. The effect of high-pressures on thermodynamic properties viz. thermal expansion coefficient, specific heat capacity and Grüneisen parameter is also carried out by employing the quasi-harmonic Debye model. Temperature dependence of Seebeck coefficient, electrical conductivity, thermal conductivity, power factor, and figure of merit is observed up to 800 K. The lattice thermal conductivity decreases with temperature due to rattling behavior of the filler atom. SrFe{sub 4}As{sub 12} exhibits the high value of the figure of merit equal to 0.76 at 800 K. The present results clearly signify that SrFe{sub 4}As{sub 12} may be a good choice for thermoelectric applications due to its high-power factor and figure of merit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FP-LAPW study of the fundamental properties of the cubic spinel CdAl{sub 2}O{sub 4}

Highlights: Black-Right-Pointing-Pointer Fundamental properties of CdAl{sub 2}O{sub 4} are investigated. Black-Right-Pointing-Pointer Results obtained for energy band gaps using EV-GGA are larger than that within PBE-GGA. Black-Right-Pointing-Pointer The decomposition of the dielectric function into individual band-to-band contributions is calculated. Black-Right-Pointing-Pointer The effective charge-carrier masses are estimated from the band structure. Black-Right-Pointing-Pointer Pressure and temperature dependences of some macroscopic parameters are obtained. -- Abstract: We have investigated the structural, elastic, electronic, optical and thermodynamic properties of the cubic spinel CdAl{sub 2}O{sub 4} using accurate ab initio calculations. Computed equilibrium structural parameters are in good agreement with the available experimental data. Single-crystals elastic parameters are calculated for pressure up to 30 GPa using a conserving-volume total energy-strain method. Isotropic elastic parameters for ideal polycrystalline CdAl{sub 2}O{sub 4} aggregates are computed in the framework of the Voigt-Reuss-Hill approximation. Result for band structure using the Engel-Vosko scheme of the GGA shows a significant improvement over the common GGA functionals. Optical spectra have been calculated for the energy range 0-30 eV. The peaks and structures in the optical spectra are assigned to interband transitions. Pressure dependence of the band gaps, static dielectric constant and static refractive index are also investigated. Pressure and thermal effects on some macroscopic properties are predicted using the quasi-harmonic Debye model.

36 MATERIALS SCIENCE↗

Analysis of the structural, electronic, elastic and thermodynamic properties of CuAl2X4 (X = O, S) spinel structure

Highlights: • Fundamental properties of CuAl{sub 2}X{sub 4} (X = O, S) aluminate spinels have been investigated. • The pressure dependence of the elastic constants C{sub ij} can be successfully fit by a straight line. • CuAl{sub 2}X{sub 4} (X = O, S) compounds are mechanically stable at ambient conditions. • Temperature and pressure dependences of some macroscopic parameters are achieved. - Abstract: The structural, electronic, elastic and thermodynamic properties of oxo- and thio-spinels have been predicted based on the ultrasoft pseudo-potential scheme as implemented in the CASTEP code. The exchange-correlation potential was treated within the generalized gradient approximation (GGA-PBE). The calculated structural parameters such as lattice constants and internal parameters are in good agreement with the available experimental data. The ground state electronic band structure revealed that CuAl{sub 2}X{sub 4} (XO, S) spinels are direct band gap semiconductors with a transition along Γ-Γ symmetry points. The calculated values of elastic constants satisfy the Born criteria at ambient conditions and confirm that the spinel structures of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} are mechanically stable. The thiospinel structure may have a phase transition under pressure, due to the negative value of C{sub 44}. The influence of temperature and pressure on macroscopic characteristics of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} compounds was estimated using the quasi-harmonic Debye model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Electronic, and Thermal Properties of CdSnAs 2

Structural, electrical, and thermal properties of CdSnAs 2 , with analyses from temperature-dependent transport properties over a large temperature range, are reported. Phase-pure microcrystalline powders were synthesized that were subsequently densified to a high-density homogeneous polycrystalline specimen for this study. Temperature-dependent transport indicates n-type semiconducting behavior with a very high and nearly temperature independent mobility over the entire measured temperature range, attributed to the very small electron effective mass of this material. The Debye model was successfully applied to model the thermal conductivity and specific heat. Furthermore, this work contributes to the fundamental understanding of this material, providing further insight and allowing for investigations into altering this and related physical properties of these materials for technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ EXAFS-Based Nanothermometry of Heterodimer Nanocrystals under Induction Heating

The ability to heat nanocrystalline materials through magnetic induction has been used in the fields of catalysis, biomedical sciences, and polymer degradation. However, the working temperature to which the inductively coupled material rises is still poorly understood. Herein, we use extended X-ray absorption fine structure spectroscopy in conjunction with thermal imaging to improve the understanding of heating in inductively coupled systems. After extraction of the Debye–Waller factor from the spectroscopy, we obtain the temperature of inductively heated nanocrystals from the correlated Debye model. We combine carbon-supported iron oxide nanocrystals as induction heating agents with platinum nanocrystals as thermal probes. By testing these nanocrystal species as both unattached nanocrystals and heterodimers, we report that nanostructured systems show a significant temperature difference of up to 73.60 °C when compared to their local support environment. Furthermore, this result has implications for inductively heated catalysis, magnetic hyperthermia for targeted cell death, and polymer synthesis.

09 BIOMASS FUELS↗

Phase Transitions and Thermal Equation of State of Fe‐9wt.%Si Applied to the Moon and Mercury

Abstract Accurate knowledge of the phase transitions and thermoelastic properties of candidate iron alloys, such as Fe‐Si alloys, is essential for understanding the nature and dynamics of planetary cores. The phase diagrams of some Fe‐Si alloys between 1 atm and 16 GPa have been back‐extrapolated from higher pressures, but the resulting phase diagram of Fe 83.6 Si 16.4 (9 wt.% Si) is inconsistent with temperature‐induced changes in its electrical resistivity between 6 and 8 GPa. This study reports in situ synchrotron X‐ray diffraction (XRD) measurements on pre‐melted and powder Fe 83.6 Si 16.4 samples from ambient conditions to 60 GPa and 900 K using an externally heated diamond‐anvil cell. Upon compression at 300 K, the bcc phase persisted up to ∼38 GPa. The hcp phase appeared near 8 GPa in the pre‐melted sample, and near 17 GPa in the powder sample. The appearance of the hcp phase in the pre‐melted sample reconciles the reported changes in electrical resistivity of a similar sample, thus resolving the low‐pressure region of the phase diagram. The resulting high‐temperature Birch‐Murnaghan equation of state (EoS) and thermal EoS based on the Mie‐Gruneisen‐Debye model of the bcc and hcp structures are consistent with, and complement the literature data at higher pressures. The calculated densities based on the thermal EoS of Fe‐9wt.%Si indicate that both bcc and hcp phases agree with the reported core density estimates for the Moon and Mercury.

Berrada, Meryem↗

Positron scattering from hydrogen atom embedded in dense quantum plasma

Scattering of positrons from the ground state of hydrogen atoms embedded in dense quantum plasma has been investigated by applying a formulation of the three-body collision problem in the form of coupled multi-channel two-body Lippmann-Schwinger equations. The interactions among the charged particles in dense quantum plasma have been represented by exponential cosine-screened Coulomb potentials. Variationally determined hydrogenic wave function has been employed to calculate the partial-wave scattering amplitude. Plasma screening effects on various possible mode of fragmentation of the system e{sup +}+H(1s) during the collision, such as 1s→1s and 2s→2s elastic collisions, 1s→2s excitation, positronium formation, elastic proton-positronium collisions, have been reported in the energy range 13.6-350 eV. Furthermore, a comparison has been made on the plasma screening effect of a dense quantum plasma with that of a weakly coupled plasma for which the plasma screening effect has been represented by the Debye model. Our results for the unscreened case are in fair agreement with some of the most accurate results available in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗