Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deactivation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Temperature dependence of vibrational relaxation in the HF, DF, HF-CO2, and DF-CO2 systems

The laser excited fluorescence method has been employed to determine rate constants for V to V, R and V to R, T relaxation HF (nu = 1) and DF(nu = 1) by CO2 over the temperature range from 295 to 670 K. The self-deactivation rates for HF(nu = 1) and DF(nu = 1) by ground state molecules and the rate of V to V, R transfer from HF(nu = 1) and DF(nu = 1) to the CO2 (00/0/1) state exhibit a marked decrease with increasing temperature. The results provide additional evidence for the conversion of the large vibrational energy defects of the present systems into rotational motion of the hydrogen halide under the influence of a sizable attractive intermolecular potential well.

Lucht, R. A.↗
NASA NTRS1974

A flash photolysis-resonance fluorescence study of the formation of O(D-1) in the photolysis of water and reaction of O(D-1) with H2, Ar and He

The relative importance of two primary processes in the photolyis of water: (1) H2O + h (nu) yields H + OH, and (2) H2O + h (nu) yields H2 + OD-1 were determined in a direct manner by time resolved detection (via resonance fluorescence) of H and O formed in processes 1 and 2 respectively. The initially formed OD-1 was deactivated to ground state OP-3 prior to detection via resonance fluorescence. The relative quantum yields for processes 1 and 2 are 0.89 and 0.11 for the wavelength interval 105 to 145nm and = to or greater than 0.99, and = to or less than 0.01 for the wavelength interval 145 to 185nm. Rate constants at 300 K for the reactions OD-1 + H2, + Ar, and + He are presented.

Stief, L. J.↗
NASA NTRS1974

San Francisco floating STOLport study

The operational, economic, environmental, social and engineering feasibility of utilizing deactivated maritime vessels as a waterfront quiet short takeoff and landing facility to be located near the central business district of San Francisco was investigated. Criteria were developed to evaluate each site, and minimum standards were established for each criterion. Predicted conditions at the two sites were compared to the requirements for each of the 11 criteria as a means of evaluating site performance. Criteria include land use, community structure, economic impact, access, visual character, noise, air pollution, natural environment, weather, air traffic, and terminal design.

Source record↗
NASA NTRS1975

Development of a high-resolution automatic digital (urine/electrolytes) flow volume and rate measurement system of miniature size

To aid in the quantitative analysis of man's physiological rhythms, a flowmeter to measure circadian patterns of electrolyte excretion during various environmental stresses was developed. One initial flowmeter was designed and fabricated, the sensor of which is the approximate size of a wristwatch. The detector section includes a special type of dielectric integrating type sensor which automatically controls, activates, and deactivates the flow sensor data output by determining the presence or absence of fluid flow in the system, including operation under zero-G conditions. The detector also provides qualitative data on the composition of the fluid. A compact electronic system was developed to indicate flow rate as well as total volume per release or the cumulative volume of several releases in digital/analog forms suitable for readout or telemetry. A suitable data readout instrument is also provided. Calibration and statistical analyses of the performance functions required of the flowmeter were also conducted.

Liu, F. F.↗
NASA NTRS1975

Temperature dependence of vibrational relaxation in the HF-DF, HF-CO2, and DF-CO2 systems. II

Measurements of vibrational energy transfer probabilities are presented for the temperature range 205-360 K for HF-DF, HF-CO2, and DF-CO2 gas mixtures. The present results provide an accurate determination of the inverse temperature dependence of the energy transfer probabilities exhibited by these systems. Large deactivation effects caused by HF (DF) polymers were observed for temperatures below 220 K.

Lucht, R. A.↗
NASA NTRS1976

Reaction of NH2 with NO and O2

Experiments were performed on the photooxidation of NH3 at room temperature and the photolysis of NH3-NO mixtures in order to determine the reaction paths of NH2 with O2. NH3 was photolyzed (NH3 + E yields NH2 + H) in the presence of O2 above 0.6 torr at 213.9 nm and 25 C, producing N2 and N2O. Only N2 and N2O were produced with any significant quantum yield, and their quantum yield was invariant with reaction conditions, which imposes a great number of constraints reducing the number of possible reactions greatly. It is argued that the N2 must be produced from the NH2O2 radical which was produced by the reaction between NH2 and O2. Subsequent reactions leading to N2 and N2O are speculative. In the photolysis of NH3 in the presence of NO and NO-O2 mixtures, the products identified were N2, H2, and N2O. Without the presence of O2, the reaction scheme after photolysis is (2) NH2 + NO yields N2 + H2O, (3) H + NO + M yields HNO + M, (4) H + HNO yields H2 + NO, and (5) 2HNO yields N2O + H2O. The average value for the ratio k3 times the square root of k5 divided by k4 was computed to be (1.6 plus or minus 0.6) times 10 to the minus 28th cm to the exponent 9/2 per square root sec. In addition, the presence of 113 mtorr of O2 had no effect on the quantum yields of N2 or H2, so it appears that it does not deactivate electronically excited NH3.

Jayanty, R. K. M.↗
NASA NTRS1976

Synthesis and analysis of jet fuel from shale oil and coal syncrudes

Thirty-two jet fuel samples of varying properties were produced from shale oil and coal syncrudes, and analyzed to assess their suitability for use. TOSCO II shale oil and H-COAL and COED syncrudes were used as starting materials. The processes used were among those commonly in use in petroleum processing-distillation, hydrogenation and catalytic hydrocracking. The processing conditions required to meet two levels of specifications regarding aromatic, hydrogen, sulfur and nitrogen contents at two yield levels were determined and found to be more demanding than normally required in petroleum processing. Analysis of the samples produced indicated that if the more stringent specifications of 13.5% hydrogen (min.) and 0.02% nitrogen (max.) were met, products similar in properties to conventional jet fuels were obtained. In general, shale oil was easier to process (catalyst deactivation was seen when processing coal syncrudes), consumed less hydrogen and yielded superior products. Based on these considerations, shale oil appears to be preferred to coal as a petroleum substitute for jet fuel production.

Gallagher, J. P.↗
NASA NTRS1976

Payload specialist station study. Volume 2, part 1: Preliminary design document

The details of six tasks of the payload Specialist Station study are discussed: (1) derive payload control and display requirements; (2) perform functional analyses; (3) perform system synthesis; (4) perform trade studies; (5) perform preliminary design; and (6) provide data format. Functional analysis diagrams were developed for the study payloads. These diagrams presented the payload's functional activities flow based on the six mission phases established. These phases are: (1) launch, ascent, orbit insertion; (2) on-orbit checkout and activation; (3) on-orbit operation; (4) deployment/retrieval; (5) on-orbit deactivation; and (6) descent, landing, post-landing. To perform system synthesis the widest variety of available hardware and software, as individual pieces of equipment and as systems, was investigated. The intent was to synthesize a complete AFD system or systems which could accommodate the range of requirements identified for the study missions.

Source record↗
NASA NTRS1976

Recombination of O2/+/ in the ionosphere

In spite of the excellent agreement between various laboratory measurements of the recombination rate of O2(+) with electrons, it is still questionable whether the laboratory results apply in the ionosphere, because although the radiative lifetime of vibrating O2(+) is not well known, indications are that it may be very long. Whether the laboratory results apply in the atmosphere depends on whether the recombination rate is dependent on the vibrational state of the O2(+) ion and on whether the ions are deactivated (or not) in both the laboratory experiments and the atmosphere prior to recombination. To obtain reliable answers to these questions, the present study was carried out to determine the recombination of O2(+) in the ionosphere from in situ measurements of the relevant temperatures and densities made by the open source mass spectrometer carried by the AE-C satellite. The photochemistry involved is discussed. The results show that the ionospheric determination of the recombination rate of O2(+) with electrons agrees with the laboratory measurements of Walls and Dunn (1974) for electron temperatures between 1200 and 2000 K.

Torr, D. G.↗
NASA NTRS1976

Some aspects of the stratospheric Cl-ClO-Cl cycle - Possible roles of ClO, ClNO3 and HOCl

The possible inhibitory effect of excited ClO produced during chlorine-sensitized ozone decomposition on the stratospheric Cl-ClO-Cl cycle is investigated. Collisional deactivation of excited ClO is discussed, chemical reactions involving excited ClO are examined, and the possible roles of HO2 and NO2 in weakening the Cl-ClO-Cl cycle are evaluated. It is noted that the formation of HOCl through a reaction between ClO and HO2 implies that the Cl-ClO-Cl cycle has not been completed.

Prasad, S. S.↗
NASA NTRS1977

Overload protection system for power inverter

An overload protection system for a power inverter utilized a first circuit for monitoring current to the load from the power inverter to detect an overload and a control circuit to shut off the power inverter, when an overload condition was detected. At the same time, a monitoring current inverter was turned on to deliver current to the load at a very low power level. A second circuit monitored current to the load, from the monitoring current inverter, to hold the power inverter off through the control circuit, until the overload condition was cleared so that the control circuit may be deactivated in order for the power inverter to be restored after the monitoring current inverter is turned off completely.

Nagano, S.↗
NASA NTRS1978

Optical conversion method

An optical pickup comprising an electrooptical device located between two crossed polarizing devices all positioned along a common optical axis is described for switching a TV system between a color mode and a black and white mode. Embodiments in which the electrooptical system is used as a neutral density filter, a selective color filter, or a light shutter as applied to a television camera are described. Where the optical system is used as a selective color filter to produce light beams of alternating color in a field sequential color television system, deactivation of the optical system renders the television a black and white system.

Perry, W. E.↗
NASA NTRS1978

Experiments concerning the laser-enhanced reaction between vibrationally excited O3 and NO

The enhancement in reaction rate between O3 and NO is studied for the case of O3 vibrationally excited by a CO2 laser. Chemiluminescence observations of a vibrationally excited and an electronically excited nitrogen dioxide reaction product provide information on the separate contributions to the overall reaction rate of these two reactive channels. The contribution of the stretching and bending modes of O3 to the reaction rate enhancement is also discussed. In addition, consideration is given to the nonreactive vibrational deactivation of vibrationally excited O3.

Hui, K.-K.↗
NASA NTRS1978

System for and method of freezing biological tissue

Biological tissue is frozen while a polyethylene bag placed in abutting relationship against opposed walls of a pair of heaters. The bag and tissue are cooled with refrigerating gas at a time programmed rate at least equal to the maximum cooling rate needed at any time during the freezing process. The temperature of the bag, and hence of the tissue, is compared with a time programmed desired value for the tissue temperature to derive an error indication. The heater is activated in response to the error indication so that the temperature of the tissue follows the desired value for the time programmed tissue temperature. The tissue is heated to compensate for excessive cooling of the tissue as a result of the cooling by the refrigerating gas. In response to the error signal, the heater is deactivated while the latent heat of fusion is being removed from the tissue while the tissue is changing phase from liquid to solid.

Williams, T. E.↗
NASA NTRS1977

Satellite Power System (SPS) microwave subsystem impacts and benefits

The impacts and benefits to society of the microwave subsystem resulting from the developing, construction and operating of a space solar power to earth, electric power delivery system are presented and discussed. The primary benefit (usable energy) is conveyed mainly in the fundamental frequency portion of the RF radiation beam that is intercepted and converted to electric power output. The small fraction of the microwave and other electromagnetic energy that does not end up in the electric utility grid, yields most of the subsystem impacts. The impacts range from harmonics and noise radiated by the transmitting antenna, through potential interference with ionospheric communications and navigation caused by the power beam heating the ionosphere, to the potential large land area requirements for the rectennas and low level microwave radiation around the rectennas. Additional benefits range from a very low level of waste heat liberated and lack of atmospheric emissions including noise while operating to having no residual ionizing radiation from the rectenna when it is deactivated.

Dickinson, R. M.↗
NASA NTRS1979

Silicon Materials Task of the Low Cost Solar Array Project, Phase 3. Effect of Impurities and Processing on Silicon Solar Cells

The effects of impurities, various thermochemical processes, and any impurity process interactions on the performance of terrestrial silicon solar cells are defined. Determinations of the segregation coefficients of tungsten, tantalum, and cobalt for the Czochralski pulling of silicon single crystals are reported. Sensitive neutron activation analysis was used to determine the metal impurity content of the silicon while atomic absorption was used to measure the metal content of the residual liquid from which the doped crystals were grown. Gettering of Ti doped silicon wafers improved cell performance by one to two percent for the highest temperatures and longest times. The HCl is more effective than POCl3 treatments for deactivating Ti but POCl3 and HCl produced essentially identical results for Mo or Fe.

Hopkins, R. H.↗
NASA NTRS1979

Nonequilibrium radiative heating of a Jovian entry body

The influence of nonlocal thermodynamic equilibrium (NLTE) radiative transfer on radiative and convective heating of a Jovian entry body is investigated. The flow in the shock layer is assumed to be axisymmetric, viscous, and in chemical equilibrium. The chemical species considered for the collisional deactivation processes are H2, H, H+. The NLTE radiative transfer equations are derived for multilevel energy transitions. The rotational and vibrational energy modes are assumed to be in local thermodynamic equilibrium. The results indicate that higher-level energy transitions have little influence on the overall NLTE results. The NLTE results, however, are found to be greatly influenced by the temperature distributions in the shock layer. The convective and radiative heating to the entry body are reduced significantly because of the NLTE conditions; the reduction in convective heating, however, is relatively small. The influence of NLTE is found to be greater at higher entry altitudes.

Tiwari, S. N.↗
NASA NTRS1978

Photoacoustic spectroscopy of condensed matter

Photoacoustic spectroscopy is a new analytical tool that provides a simple nondestructive technique for obtaining information about the electronic absorption spectrum of samples such as powders, semisolids, gels, and liquids. It can also be applied to samples which cannot be examined by conventional optical methods. Numerous applications of this technique in the field of inorganic and organic semiconductors, biology, and catalysis have been described. Among the advantages of photoacoustic spectroscopy, the signal is almost insensitive to light scattering by the sample and information can be obtained about nonradiative deactivation processes. Signal saturation, which can modify the intensity of individual absorption bands in special cases, is a drawback of the method.

Somoano, R. B.↗