Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

X-ray spectral constraints on the broad-line cloud geometry of NGC 4151

X-ray spectral data from NGC 4151 taken with the Einstein Solid-State Spectrometer (SSS) and the HEAO 1 A-2 experiment cannot be simply reconciled with absorption from a uniform column of cold gas. The SSS data can, however, be explained in terms of a clumped absorber with approximately 10% uncovered fraction and factor-of-two overabundances in Z equal to or greater than 14 elements relative to solar oxygen. It is shown that these and previously reported spectral and variability data can be quantitatively reconciled with absorption arising in the cold clouds responsible for the broad optical line emission if the cloud dimensions are small compared to the central source size. It is suggested that the lack of significant X-ray absorption observed from much higher luminosity Seyferts and quasars is a natural consequence of the proposed picture for NGC 4151.

Holt, S. S.↗
NASA NTRS2021

Western Montana Ecological Forecasting: Modeling Habitat Suitability of Mustelid Species to Guide Detection Dog Surveys for Contaminants Monitoring, via Collected Scats in River Systems of Western Montana

Environmental contaminants are becoming increasingly prevalent in riverine ecosystems. The status of contaminants in western Montana’s relatively pristine river systems is largely unknown. Monitoring for heavy metals, brominated flame-retardants (BFRs), and pharmaceuticals is important due to their negative effects on ecosystems. Exposure to these contaminants can have significant endocrine, neurological, and reproductive effects. Contaminants easily travel up the food chain and bioaccumulate in apex predators. As predators with a largely aquatic diet, American mink (Mustela vison) and North American river otter (Lontra canadensis) serve as reliable indicator species of environmental health and the status of contaminants. Analysis of scat from these species is a noninvasive method to measure contaminant levels, and detection dogs from Working Dogs for Conservation (WD4C) have been used to locate these scat samples. To aid in the search of these samples, habitat suitability models were created for mink and otter for the years 2013-2020 and projected to 2040 using the random forest algorithm in the Software for Assisted Habitat Modeling (SAHM). Predictor variable data were acquired from Landsat 8 Operational Land Imager (OLI), Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Global Precipitation Measurement Integrated Multi-satellite Retrievals for GPM (GPM IMERG), Shuttle Radar Topography Mission (SRTM), and Soil Moisture Active Passive (SMAP). Within these models, the most important variable for mink and otter habitat was distance to river. Suitable habitat also corresponded with emergent herbaceous land cover and deeper river locations. These habitat suitability models will inform sampling site section for further contaminant analysis.

Anna Winter↗
NASA NTRS2017

GES DISC Datalist Improves Earth Science Data Discoverability

At American Geophysical Union(AGU) 2016 Fall Meeting, Goddard Earth Sciences Data Information Services Center (GES DISC) unveiled a novel way to access data: Datalist. Currently, datalist is a collection of predefined data variables from one or more archived datasets, curated by our subject matter expert (SME). Our science support team has curated a predefined Hurricane Datalist and received very positive feedback from the user community. Datalist uses the same architecture our new website uses and have the same look and feel as other datasets on our web site. and also provides a one-stop shopping for data, metadata, citation, documentation, visualization and other available services. Since the last AGU Meeting, we have further developed a few new datalists corresponding to the Big Earth Data Initiative (BEDI) Societal Benefit Areas and A-Train data. We now have four datalists: Hurricane, Wind Energy, Greenhouse Gas and A-Train. We have also started working with our User Working Group members to create their favorite datalists and working with other DAAC to explore the possibility to include their products in our datalists that may also lead to a future of potential federated (cross-DAAC) datalists. Since our datalist prototype effort was a success, we are planning to make datalist operational. It's extremely important to have a common metadata model to support datalist, this will also be the foundation of federated datalist. We mapped our datalist metadata model to the unpublished UMM(Universal Metadata Model)-Var (Variable) (June version) and found that the UMM-var together with UMM-C (Collection) and possible UMM-S (Service) will meet our basic requirements. For example: Dataset shortname, and version are already specified in UMM-C, variable name, long name, units, dimensions are all specified in UMM-Var. UMM-Var also facilitates Science Keywords to allow tagging at variable level and Characteristics for optional variable characteristics. Measurements is useful for grouping of the variables and Set is promising to define datalist. And finally, the UMM-Service model to specify the available services for the variable will be very beneficial. In summary, UMM-Var, UMM-C and UMM-S are the basis of federated datalist and the development and deployment of datalist will contribute to the evolution of the UMM.

datalist↗
NASA NTRS1977

A search for hard X-rays from five strong extragalactic radio sources

Data from the University of California at San Diego (UCSD) hard X-ray instrument on OSO-7 have been used to search the regions containing 3C 390.3, M87, 3C 273, 3C 111, and 3C 129. We have a weak detection of 3C 390.3 and a possible detection of 3C 111. Sensitive upper limits on hard X-rays have been obtained for the other objects. The available observational data indicate a correlation between hard X-ray emission, self-absorbed gigahertz radio emission, and strong optical emission lines in extragalactic sources. Self-Compton X-ray models have been calculated for the sources observed in this paper, and the angular sizes, lifetimes, and B fields in these sources have been estimated. These model calculations agree with existing VLBI and time variability data.

Mushotzky, R. F.↗
NASA NTRS2000

Evidence for Supermassive Black Holes in Active Galactic Nuclei from Emission-Line Reverberation

Emission-line variability data for Seyfert 1 galaxies provide strong evidence for the existence of supermassive black holes in the nuclei of these galaxies and that the line-emitting gas is moving in the gravitational potential of that black hole. The time-delayed response of the emission lines to continuum variations is used to infer the size of the line-emitting region, which is then combined with measurements of the Doppler widths of the variable line components to estimate a virial mass. la the case of the best-studied galaxy, NGC 5548, various emission lines spanning an order of magnitude in distance from the central source show the expected V proportional to r(sup -l/2) correlation between distance and line width and are thus consistent with a single value for the mass. Two other Seyfert galaxies, NGC 7469 and 3C 390.3, show a similar relationship. We compute the ratio of luminosity to mass for these three objects and the narrow-line Seyfert I galaxy NGC 4051 and find that the gravitational force on the line-emitting gas is much stronger than radiation pressure. These results strongly support the paradigm of gravitationally bound broad emission line region clouds.

Peterson, Bradley M.↗
NASA NTRS2007

Seasonal Evolution and Interannual Variability of the Local Solar Energy Absorbed by the Arctic Sea Ice-Ocean System

The melt season of the Arctic sea ice cover is greatly affected by the partitioning of the incident solar radiation between reflection to the atmosphere and absorption in the ice and ocean. This partitioning exhibits a strong seasonal cycle and significant interannual variability. Data in the period 1998, 2000-2004 were analyzed in this study. Observations made during the 1997-1998 SHEBA (Surface HEat Budget of the Arctic Ocean) field experiment showed a strong seasonal dependence of the partitioning, dominated by a five-phase albedo evolution. QuikSCAT scatterometer data from the SHEBA region in 1999-2004 were used to further investigate solar partitioning in summer. The time series of scatterometer data were used to determine the onset of melt and the beginning of freezeup. This information was combined with SSM/I-derived ice concentration, TOVS-based estimates of incident solar irradiance, and SHEBA results to estimate the amount of solar energy absorbed in the ice-ocean system for these years. The average total solar energy absorbed in the ice-ocean system from April through September was 900 MJ m(sup -2). There was considerable interannual variability, with a range of 826 to 1044 MJ m(sup -2). The total amount of solar energy absorbed by the ice and ocean was strongly related to the date of melt onset, but only weakly related to the total duration of the melt season or the onset of freezeup. The timing of melt onset is significant because the incident solar energy is large and a change at this time propagates through the entire melt season, affecting the albedo every day throughout melt and freezeup.

Perovich, Donald K.↗
NASA NTRS2016

New Approaches for Direct Current (DC) Balanced SpaceWire

Direct Current (DC) line balanced SpaceWire is attractive for a number of reasons. Firstly, a DC line balanced interface provides the ability to isolate the physical layer with either a transformer or capacitor to achieve higher common mode voltage rejection and or the complete galvanic isolation in the case of a transformer. And secondly, it provides the possibility to reduce the number of conductors and transceivers in the classical SpaceWire interface by half by eliminating the Strobe line. Depending on the modulator scheme the clock data recovery frequency requirements may be only twice that of the transmit clock, or even match the transmit clock: depending on the Field Programmable Gate Array (FPGA) decoder design. In this paper, several different implementation scenarios will be discussed. Two of these scenarios are backward compatible with the existing SpaceWire hardware standards except for changes at the character level. Three other scenarios, while decreasing by half the standard SpaceWire hardware components, will require changes at both the character and signal levels and work with fixed rates. Other scenarios with variable data rates will require an additional SpaceWire interface handshake initialization sequence.

Line encoding↗
NASA NTRS2016

New Approaches for DC Balanced SpaceWire

Direct Current (DC) line balanced SpaceWire is attractive for a number of reasons. Firstly, a DC line balanced interface provides the ability to isolate the physical layer with either a transformer or capacitor to achieve higher common mode voltage rejection and/or the complete galvanic isolation in the case of a transformer. Secondly, it provides the possibility to reduce the number of conductors and transceivers in the classical SpaceWire interface by half by eliminating the Strobe line. Depending on the modulator scheme - the clock data recovery frequency requirements may be only twice that of the transmit clock, or even match the transmit clock: depending on the Field Programmable Gate Array (FPGA) decoder design. In this paper, several different implementation scenarios will be discussed. Two of these scenarios are backward compatible with the existing SpaceWire hardware standards except for changes at the character level. Three other scenarios, while decreasing by half the standard SpaceWire hardware components, will require changes at both the character and signal levels and work with fixed rates. Other scenarios with variable data rates will require an additional SpaceWire interface handshake initialization sequence.

SpaceWire↗
NASA NTRS1992

Real-time demonstration hardware for enhanced DPCM video compression algorithm

The lack of available wideband digital links as well as the complexity of implementation of bandwidth efficient digital video CODECs (encoder/decoder) has worked to keep the cost of digital television transmission too high to compete with analog methods. Terrestrial and satellite video service providers, however, are now recognizing the potential gains that digital video compression offers and are proposing to incorporate compression systems to increase the number of available program channels. NASA is similarly recognizing the benefits of and trend toward digital video compression techniques for transmission of high quality video from space and therefore, has developed a digital television bandwidth compression algorithm to process standard National Television Systems Committee (NTSC) composite color television signals. The algorithm is based on differential pulse code modulation (DPCM), but additionally utilizes a non-adaptive predictor, non-uniform quantizer and multilevel Huffman coder to reduce the data rate substantially below that achievable with straight DPCM. The non-adaptive predictor and multilevel Huffman coder combine to set this technique apart from other DPCM encoding algorithms. All processing is done on a intra-field basis to prevent motion degradation and minimize hardware complexity. Computer simulations have shown the algorithm will produce broadcast quality reconstructed video at an average transmission rate of 1.8 bits/pixel. Hardware implementation of the DPCM circuit, non-adaptive predictor and non-uniform quantizer has been completed, providing realtime demonstration of the image quality at full video rates. Video sampling/reconstruction circuits have also been constructed to accomplish the analog video processing necessary for the real-time demonstration. Performance results for the completed hardware compare favorably with simulation results. Hardware implementation of the multilevel Huffman encoder/decoder is currently under development along with implementation of a buffer control algorithm to accommodate the variable data rate output of the multilevel Huffman encoder. A video CODEC of this type could be used to compress NTSC color television signals where high quality reconstruction is desirable (e.g., Space Station video transmission, transmission direct-to-the-home via direct broadcast satellite systems or cable television distribution to system headends and direct-to-the-home).

Bizon, Thomas P.↗
NASA NTRS1999

Regional Studies and Applications with a Variable Resolution Stretched Grid Data Assimilation System

The variable resolution stretched grid (SG) version of the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS) incorporating the GEOS SG-GCM, is used for regional analysis, forecast, and climate applications. The region of interest with enhanced horizontal resolution, mostly used in experiments, is a rectangle over the U.S. The SG-DAS is capable of reproducing regional mesoscale fields, patterns and diagnostics that are not produced by the medium uniform resolution run with the same amount of grid points as for the SG. The SG-DAS regional analyses and diagnostics are used for: validation of regional climate simulation experiments produced with the SG-GCM for the U.S. 1988 summer drought; and are planned to be used for atmospheric chemistry transport experiments. Also, a case study is conducted on a super-typhoon development in December 1997. The SG-DAS appears to be a viable candidate for a variety of regional studies and applications.

Fox-Rabinovitz, Michael↗
NASA NTRS1972

Program for computer aided reliability estimation

A computer program for estimating the reliability of self-repair and fault-tolerant systems with respect to selected system and mission parameters is presented. The computer program is capable of operation in an interactive conversational mode as well as in a batch mode and is characterized by maintenance of several general equations representative of basic redundancy schemes in an equation repository. Selected reliability functions applicable to any mathematical model formulated with the general equations, used singly or in combination with each other, are separately stored. One or more system and/or mission parameters may be designated as a variable. Data in the form of values for selected reliability functions is generated in a tabular or graphic format for each formulated model.

Mathur, F. P.↗
NASA NTRS1976

The Effects of Blowing Over Various Trailing-edge Flaps on an NACA 0006 Airfoil Section, Comparisons with Various Types of Flaps on other Airfoil Sections, and an Analysis of Flow and Power Relationships for Blowing Systems

The results are presented of a two-dimensional investigation conducted to determine the effect of blowing over various types of trailing-edge flaps on a wing having the NACA 0006 airfoil section and a drooped-nose flap. The position and profile of the trailing-edge flap, the nozzle height, and the location of the flap with respect to the nozzle were found to be important variables. Data from many investigations were used to make an evaluation of the effects of blowing on lift. An analysis was made of flow and power relationships for blowing systems.

Dods, J. B., Jr.↗
NASA NTRS1978

Air turbulence measurements in and below cumulus congestus over mountainous terrain

Consideration is given to the definition and application to air turbulence measurements over mountainous terrain of the ensemble averaging operator in the second-order turbulent transfer model of moist, precipitating mesoscale systems developed by Manton and Cotton (1977) as a first step in the formulation of a unified mesoscale turbulence theory. The use of running means to smooth out point-to-point data variability is proposed as a means of avoiding certain of the problems associated with ensemble averaging, and is applied to airborne velocity measurements in cumulus congestus over South Park, Colorado. It is found that, in general, vertical transport of any cloud parameter will be primarily eddy transport in the mesoscale modeling of cloud processes.

Cotton, W. R.↗
NASA NTRS1982

Turbofan forced mixer-nozzle internal flowfield. Volume 1: A benchmark experimental study

An experimental investigation of the flow field within a model turbofan forced mixer nozzle is described. Velocity and thermodynamic state variable data for use in assessing the accuracy and assisting the further development of computational procedures for predicting the flow field within mixer nozzles are provided. Velocity and temperature data suggested that the nozzle mixing process was dominated by circulations (secondary flows) of a length scale on the order the lobe dimensions which were associated with strong radial velocities observed near the lobe exit plane. The 'benchmark' model mixer experiment conducted for code assessment purposes is discussed.

Paterson, R. W.↗
NASA NTRS1984

X-ray emission from active galactic nuclei

The advantages of X-ray astronomy for studying active galactic nuclei (AGN) are discussed. If the X-ray emission from AGN arises from a region close to the central energy source X-ray observations may provide the best constraints on the central engine. The shape of the X-ray continuum gives information about the mechanism for photon generation; X-ray time variability data can constrain the size and mass of the continuum source; and X-ray occultation data gives constraints on the relative sizes of the continuum source and the intervening absorbing material. Since a fair fraction of the total energy of an AGN is emitted at X-ray wavelengths, direct measurement of the amount and spectral form of this radiation is important for modeling of the optically emitting clouds.

Mushotzky, R.↗
NASA NTRS1985

X-ray emission from active galactic nuclei

It is often held that the X-ray emission from active galactic nuclei (AGN) arises from a region close to the central energy source. Thus X-ray observations may provide the best constraints on the central engine. In particular, the shape of the X-ray continuum gives information about the mechanism for photon generation, X-ray time variability data can constrain the size and mass of the continuum source, and X-ray occultation data give constraints on the relative sizes of the continuum source and the intervening absorbing material (often assumed to be the broad line clouds). In addition, since a fair fraction of the total energy of an AGN is emitted at X-ray wavelengths, direct measurement of the amount and spectral form of this radiation is important for modeling of the optically emitting clouds.

Mushotzky, R.↗
NASA NTRS1985

Finite element analysis of notch behavior using a state variable constitutive equation

The state variable constitutive equation of Bodner and Partom was used to calculate the load-strain response of Inconel 718 at 649 C in the root of a notch. The constitutive equation was used with the Bodner-Partom evolution equation and with a second evolution equation that was derived from a potential function of the stress and state variable. Data used in determining constants for the constitutive models was from one-dimensional smooth bar tests. The response was calculated for a plane stress condition at the root of the notch with a finite element code using constant strain triangular elements. Results from both evolution equations compared favorably with the observed experimental response. The accuracy and efficiency of the finite element calculations also compared favorably to existing methods.

Dame, L. T.↗