Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENMARK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Blind photovoltaic modeling intercomparison: A multidimensional data analysis and lessons learned

The Photovoltaic (PV) Performance Modeling Collaborative (PVPMC) organized a blind PV performance modeling intercomparison to allow PV modelers to blindly test their models and modeling ability against real system data. Measured weather and irradiance data were provided along with detailed descriptions of PV systems from two locations (Albuquerque, New Mexico, USA, and Roskilde, Denmark). Participants were asked to simulate the plane-of-array irradiance, module temperature, and DC power output from six systems and submit their results to Sandia for processing. The results showed overall median mean bias (i.e., the average error per participant) of 0.6% in annual irradiation and –3.3% in annual energy yield. While most PV performance modeling results seem to exhibit higher precision and accuracy as compared to an earlier blind PV modeling study in 2010, human errors, modeling skills, and derates were found to still cause significant errors in the estimates.

14 SOLAR ENERGY↗

Offshore Wind Energy

In 1991, the Vindeby Offshore Wind Farm, the first offshore wind farm in the world, started feeding electricity to the grid off the coast of Lolland, Denmark. Since then, offshore wind energy has developed from this early experiment to a multibillion dollar market and an important pillar of worldwide renewable energy production. Unit sizes grew from 450 kW at Vindeby to the 7.5 MW-class offshore wind turbines (OWT ) that are currently (by October 2014) in the prototyping phase. This chapter gives an overview of the state of the art in offshore wind turbine (OWT) technology and introduces the principles of modeling and simulating an OWT. The OWT components -- including the rotor, nacelle, support structure, control system, and power electronics -- are introduced, and current technological challenges are presented. The OWT system dynamics and the environment (wind and ocean waves) are described from the perspective of OWT modelers and designers. Finally, an outlook on future technology is provided. The descriptions in this chapter are focused on a single OWT -- more precisely, a horizontal-axis wind turbine -- as a dynamic system. Offshore wind farms and wind farm effects are not described in detail in this chapter, but an introduction and further references are given.

17 WIND ENERGY↗

Endovascular Repair of a Perforation of the Vena Caval Wall Caused by the Retrieval of a Gunther Tulip Filter After Long-Term Implantation

Symptomatic penetration of the inferior vena cava (IVC) wall reportedly occurs in 0.3% of patients in whom a filter has been implanted, and it causes injury to the adjacent structures (Bogue et al. in Pediatr Radiol 39(10):1110-1113, 1; Brzezinski et al. in Burns 32(5):640-643, 2). We succeeded in the endovascular repair of perforation of the IVC wall occurring during the retrieval of a penetrated Gunther tulip vena cava filter (Cook, Bjaeverskov, Denmark) after long-term implantation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Economy analysis of second-life battery in wind power systems considering battery degradation in dynamic processes: Real case scenarios

Energy storage system plays an important role in modern power systems for mitigating the variation and intermittency of renewable energy sources. The Lithium-ion battery is currently the most widely used solution for energy storage system. However, its high cost is considered as one of the major barriers hampering the integration of renewable energy and the adoption of electric vehicles. Reusing electric vehicle batteries seems a promising solution to the aforementioned problem. Based on a dynamic degradation model of Lithium-ion batteries, this paper first compares the profits that second-life and fresh batteries can bring to the wind farm. Model predictive control is adopted to solve an hourly optimal wind scheduling problem and maximize the profit of wind farm owner. Here, the optimal size of battery is determined and then the comparison of second-life and fresh batteries is conducted taking the battery degradation, the profit of the wind farm owner, and various remaining capacities of battery into account. Two case studies in USA and Denmark are conducted and the analysis shows that given the current prices of wind energy and Lithium-ion batteries, reusing batteries is not worthwhile for the studied wind farms, but it may outperform fresh batteries in the future if the wind energy price decreases much faster than the battery price.

17 WIND ENERGY↗

Evaluation of High Throughput Screening Methods in Picking up Differences between Cultivars of Lignocellulosic Biomass for Ethanol Production

Here, we present a unique evaluation of three advanced high throughput pretreatment and enzymatic hydrolysis systems (HTPH-systems) for screening of lignocellulosic biomass for enzymatic saccharification. Straw from 20 cultivars of winter wheat from two sites in Denmark was hydrothermally pretreated and enzymatically processed in each of the separately engineered HTPH-systems at 1) University of California, Riverside, 2) National Renewable Energy Laboratory (NREL), Colorado, and 3) University of Copenhagen (CPH). All three systems were able to detect significant differences between the cultivars in the release of fermentable sugars, with average cellulose conversions of 57%, 64%, and 71% from Riverside, NREL and CPH, respectively. We found the best correlation of glucose yields between the Riverside and NREL systems (R2 = 0.2139), and the best correlation for xylose yields was found between Riverside and CPH (R2 = 0.4269). The three systems identified Flair as the highest yielding cultivar and Dinosor, Glasgow, and Robigus as low yielding cultivars. Despite different conditions in the three HTPH-systems, the approach of microscale screening for phenotypically less recalcitrant feedstock seems sufficiently robust to be used as a generic analytical platform.

09 BIOMASS FUELS↗

OC5 Project Phase Ib: Validation of hydrodynamic loading on a fixed, flexible cylinder for offshore wind applications

This paper summarizes the findings from Phase Ib of the Offshore Code Comparison, Collaboration, Continued with Correlation (OC5) project. OC5 is a project run under the International Energy Agency (IEA) Wind Research Task 30, and is focused on validating the tools used for modelling offshore wind systems through the comparison of simulated responses of select offshore wind systems (and components) to physical test data. For Phase Ib of the project, simulated hydrodynamic loads on a flexible cylinder fixed to a sloped bed were validated against test measurements made in the shallow water basin at the Danish Hydraulic Institute (DHI) with support from the Technical University of Denmark (DTU). The first phase of OC5 examined two simple cylinder structures (Phase Ia and Ib) to focus on validation of hydrodynamic models used in the various tools before moving on to more complex offshore wind systems and the associated coupled physics. As a result, verification and validation activities such as these lead to improvement of offshore wind modelling tools, which will enable the development of more innovative and cost-effective offshore wind designs.

17 WIND ENERGY↗

Quality of Cultural Heritage in EIA; twenty years of experience in Norway

The aim of this paper is to clarify and discuss how quality, relevance, attitudes, beliefs and transfer value act as underlying driving forces in the development of the Cultural Heritage theme in EIAs. One purpose is to identify and discuss some conditions that can better environmental assessment in order to increase the significance of EIA in decision-making with regard to Cultural Heritage. The main tools used are different research methods designed for analyses of quality and quality changes, primarily based on the relevant opinions of 160 people occupied with Cultural Heritage in EIA in Norway. The study is based on a review of 40 types of EIAs from 1991 to 2000, an online questionnaire to 319 (160 responded) individuals from 14 different backgrounds, and interviews with three institutions in Sweden and Denmark. The study confirms a steadily increasing quality on EIRs over time, parallel with an improvement of the way in which Cultural Heritage is treated in EIA. This is supported by both the interviews and the qualitative comments regarding the survey. Potential for improvements is shown to be a need for more detailed background material as well as more use of adequate methods. The survey shows the existence of a wide variety of negative views, attitudes and beliefs, but the consequences of this are difficult to evaluate. However, most certainly, negative attitudes and beliefs have not been powerful enough to be detrimental to the quality of Cultural Heritage component, as nothing in the study indicates that negative attitudes and myths are undermining the system of EIA. The study shows the importance of having on-going discussions on quality and quality change over time by people involved in EIA, and how this is a necessary condition for successful implementation and acceptance. Beliefs and negative attitudes can also be a catalyst for developing better practice and advancing new methodology. In addition, new EIA countries must be prepared for several years of development and improvements after implementation. This is important in order to gain acceptance from the bureaucracy, especially from the Cultural Heritage authorities and local population.

54 ENVIRONMENTAL SCIENCES↗

Influence of building heat distribution temperatures on the energy performance and sizing of 5th generation district heating and cooling networks

This paper investigates the energy performance and sizing criteria of 5th generation district heating and cooling (5GDHC) networks as a function of the heat distribution temperature in the building systems connected to the district network. An energy simulation model of a 5GDHC network was developed in Modelica for a case study located in Denmark. Calculations were carried out for four different building heating systems. Simulation results show that reducing the heat distribution temperatures from 70 °C to 23 °C leads to around 40% annual electric energy savings (from 10.4 kWh/m 2 to 6.2 kWh/m 2 ) for the operation of the heat pumps. Heat distribution temperatures of 23 °C cause higher water mass flow rates through the network, leading to annual electric energy consumption for the circulation pumps that are almost doubled (from 0.16 kWh/m 2 to 0.3 kWh/m 2 ) compared to the reference case at 70 °C. Furthermore, the paper discusses how the results obtained from the Danish case study can be generalized and applied to other cases using a simplified mathematical approach. In conclusion, it is found that about 1.5% of electric energy savings can be achieved for each temperature degree reduction in the heat distribution system.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Exposure determinants of cadmium in European mothers and their children

The metal cadmium (Cd) is a widespread environmental pollutant with documented adverse effects on the kidneys and bones from long-term environmental exposure, but with insufficiently elucidated public health consequences such as risk of cardiovascular disease, hormone-related cancer in adults and developmental effects in children. This study is the first pan-European human biomonitoring project that succeeded in performing harmonized measurements of Cd in urine in a comparable way in mother–child couples from 16 European countries. The aim of the study was to evaluate the overall Cd exposure and significant determinants of Cd exposure. A study population of 1632 women (24–52 years of age), and 1689 children (5–12 years of age), from 32 rural and urban areas, was examined within a core period of 6 months in 2011–2012. Women were stratified as smokers and non-smokers. As expected, smoking mothers had higher geometric mean (gm) urinary cadmium (UCd; 0.24 µg/g crea; n=360) than non-smoking mothers (gm 0.18 µg/g crea; n=1272; p<0.0001), and children had lower UCd (gm 0.065 µg/g crea; n=1689) than their mothers at the country level. Non-smoking women exposed to environmental tobacco smoke (ETS) at home had 14% (95% CI 1–28%) higher UCd than those who were not exposed to ETS at home (p=0.04). No influence of ETS at home or other places on UCd levels was detected in children. Smoking women with primary education as the highest educational level of the household had 48% (95% CI 18–86%) higher UCd than those with tertiary education (p=0.0008). The same observation was seen in non-smoking women and in children; however they were not statistically significant. In children, living in a rural area was associated with 7% (95% CI 1–13%) higher UCd (p=0.03) compared to living in an urban area. Children, 9–12 years had 7% (95% CI 1–13%) higher UCd (p=0.04) than children 5–8 years. About 1% of the mothers, and 0.06% of the children, exceeded the tolerable weekly intake (TWI) appointed by EFSA, corresponding to 1.0 µg Cd/g crea in urine. Poland had the highest UCd in comparison between the 16 countries, while Denmark had the lowest. Whether the differences between countries are related to differences in the degree of environmental Cd contamination or to differences in lifestyle, socioeconomic status or dietary patterns is not clear. - Highlights: • Comparable measures of urinary Cd for mother–child couples in 16 countries were achieved. • Main urinary Cd predictors were age, smoking, educational level and rural residence. • Mean urinary Cd in children differed by a factor of 7 between countries. • Among non-smoking and smoking women the difference was 3-fold between countries. • The margin between current exposure levels and suspected health effect levels is narrow.

54 ENVIRONMENTAL SCIENCES↗

A critical view on microplastic quantification in aquatic organisms

Microplastics, plastic particles and fragments smaller than 5 mm, are ubiquitous in the marine environment. Ingestion and accumulation of microplastics have previously been demonstrated for diverse marine species ranging from zooplankton to bivalves and fish, implying the potential for microplastics to accumulate in the marine food web. In this way, microplastics can potentially impact food safety and human health. Although a few methods to quantify microplastics in biota have been described, no comparison and/or intercalibration of these techniques have been performed. Here we conducted a literature review on all available extraction and quantification methods. Two of these methods, involving wet acid destruction, were used to evaluate the presence of microplastics in field-collected mussels (Mytilus galloprovincialis) from three different “hotspot” locations in Europe (Po estuary, Italy; Tagus estuary, Portugal; Ebro estuary, Spain). An average of 0.18±0.14 total microplastics g{sup −1} w.w. for the Acid mix Method and 0.12±0.04 total microplastics g{sup −1} w.w. for the Nitric acid Method was established. Additionally, in a pilot study an average load of 0.13±0.14 total microplastics g{sup −1} w.w. was recorded in commercial mussels (Mytilus edulis and M. galloprovincialis) from five European countries (France, Italy, Denmark, Spain and The Netherlands). A detailed analysis and comparison of methods indicated the need for further research to develop a standardised operating protocol for microplastic quantification and monitoring.

54 ENVIRONMENTAL SCIENCES↗

Occurrence of cyclic imines in European commercial seafood and consumers risk assessment

Highlights: • First study of cyclic imines in commercial shellfish samples from Europe. • First study including samples from eight European countries during two years. • First report dealing risk assessment on pinnatoxins. • Completes information regarding spirolides from the EFSA report on 2010. • Increases database on levels of CIs in shellfish to perform a risk assessment. Cyclic imines constitute a quite recently discovered group of marine biotoxins that act on neural receptors and that bioaccumulate in seafood. They are grouped together due to the imino group functioning as their common pharmacore, responsible for acute neurotoxicity in mice. Cyclic imines (CIs) have not been linked yet to human poisoning and are not regulated in the European Union (EU), although the European Food Safety Authority (EFSA) requires more data to perform conclusive risk assessment for consumers. Several commercial samples of bivalves including raw and processed samples from eight countries (Italy, Portugal, Slovenia, Spain, Ireland, Norway, The Netherlands and Denmark) were obtained over 2 years. Emerging cyclic imine concentrations in all the samples were analysed on a LC-3200QTRAP and LC-HRMS QExactive mass spectrometer. In shellfish, two CIs, pinnatoxin G (PnTX-G) and 13-desmethylspirolide C (SPX-1) were found at low concentrations (0.1–12 µg/kg PnTX-G and 26–66 µg/kg SPX-1), while gymnodimines and pteriatoxins were not detected in commercial (raw and processed) samples. In summary, SPX-1 (n: 47) and PnTX-G (n: 96) were detected in 9.4% and 4.2% of the samples, respectively, at concentrations higher than the limit of quantification (LOQ), and in 7.3% and 31.2% of the samples at concentrations lower than the LOQ (25 µg/kg for SPX-1 and 3 µg/kg for PnTX-G), respectively. For the detected cyclic imines, the average exposure and the 95th percentile were calculated. The results obtained indicate that it is unlikely that a potential health risk exists through the seafood diet for CIs in the EU. However, further information about CIs is necessary in order to perform a conclusive risk assessment.

54 ENVIRONMENTAL SCIENCES↗

Automatic voltage regulation application for PV inverters in low-voltage distribution grids – A digital twin approach

This paper proposes a hierarchical coordinated control strategy for PV inverters to keep voltages in low-voltage (LV) distribution grids within specified limits. The top layer of the proposed architecture consists of the designed automatic voltage regulation (AVR) application, which has access to voltage measurements and grid parameters from the LV distribution grid, both current and historical. The AVR application solves a constrained optimization problem, which provides a set of local control set-points that bring the voltage across the grid within bounds. The middle layer consists of a local Volt/VAR controller, which is adjusted by the AVR app, while the bottom layer is the inner-loop controller of the PV inverter. The proposed method not only improves the voltage quality in the grid but also manages the reactive power outputs of PV inverters efficiently. Further, a digital twin of the cyber-physical system has also been employed that interacts with the control system to ensure its appropriate operation. The effectiveness of the proposed methodology is demonstrated on a representative low-voltage feeder located in Denmark.

24 POWER TRANSMISSION AND DISTRIBUTION↗

From lab to table: Expanding gastronomic possibilities with fermentation using the edible fungus Neurospora intermedia

Fermentation is a powerful tool for enhancing flavor, improving sustainability, and expanding creative possibilities in the kitchen. However, most fermentations done in gastronomic contexts are restricted to a small set of readily available microbial species. Expanding beyond this limited biological diversity holds promise to unlock new gastronomic innovation. Here, we explore novel culinary applications of Neurospora intermedia, an edible fungus traditionally used in Java, Indonesia to produce the fermented food oncom. Our work demonstrates that N. intermedia can be readily used in the production of oncom-like meat alternatives with non-traditional substrates, as well as in the production of enzymes for starch-to-sugar conversion. As an example, we harness secreted N. intermedia starch-degrading enzymes to produce an amazake that has a distinct volatile aroma composition compared to traditional amazake produced with Aspergillus oryzae. In addition to providing texture and flavor, N. intermedia can be used to add an orange color to dishes due to the development of brightly colored spores and aerial mycelia. This property, along with its secreted enzymes, was utilized to create a dish for fine-dining restaurant Alchemist in Copenhagen, Denmark. Overall, the novel foods produced in this study were rated favorably in consumer trials, indicating a broad sensory appeal of N. intermedia across different culinary applications and cultural contexts. The protocols and approaches presented in this study represent a new addition to the chef's toolbox that hold promise to expand gastronomic possibilities with fermentation in restaurants and beyond.

59 BASIC BIOLOGICAL SCIENCES↗

Radiation Therapy Research: A Global Analysis 2001-2015

Radiation therapy is a core modality of cancer treatment; however, concerns have been expressed regarding its underutilization and its lack of prioritization as a research domain relative to other cancer treatment modalities, despite its rapid technical evolution. It is therefore important to understand, from a public policy perspective, the evolution of global radiation therapy research, to identify strengths, weaknesses, and opportunities. This study used a bibliometric approach to undertake a quantitative analysis of global radiation therapy research published between 2001 and 2015 and available in the Web of Science (Wos) database, with particular focus on the 25 leading research-active countries. A total of 62,550 radiation therapy research articles from 127 countries, published in 2531 international journals, were analyzed. The United States was responsible for 32.3% of these outputs, followed by Japan (8.0%) and Germany (7.7%). Nearly half of all publications related to preparation and delivery of radiation therapy, combined-modality regimens, and dose fractionation studies. Health services research, palliative care, and quality of life studies represented only 2%, 5%, and 4% of all research outputs, respectively. Countries varied significantly in their commitment to different research domains, and trial-related publications represented only 5.1% of total output. Research impact was analyzed according to 3 different citation scores, with research outputs from Denmark, The Netherlands, and the United States consistently the highest ranked. Globally, radiation therapy publication outputs continue to increase but lag behind other spheres of cancer management. The types of radiation therapy research undertaken appear to be regionally patterned, and there is a clear disconcordance between the volume of research output from individual countries and its citation impact. Greater support for radiation therapy research in low- and middle-income countries is required, including international collaboration. The study findings are expected to provide the requisite knowledge to guide future radiation therapy research programs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Review of wind generation within adequacy calculations and capacity markets for different power systems

The integration of renewable energy sources, including wind power, in the adequacy assessment of electricity generation capacity becomes increasingly important as renewable energy generation increases in volume and replaces conventional power plants. The contribution of wind power to cover the electricity demand is less certain than conventional power sources; therefore, the capacity value of wind power is smaller than that of conventional plants. This article presents an overview of the adequacy challenge, how wind power is handled in the regulation of capacity adequacy, and how wind power is treated in a selection of jurisdictions. The jurisdictions included in the overview are Sweden, Great Britain, France, Ireland, United States (PJM and ERCOT), Finland, Portugal, Spain, Norway, Denmark, Belgium, Germany, Italy and the Netherlands.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Meeting report: The first soil viral workshop 2022

Soil viral ecology is a growing research field; however, the state of knowledge still lags behind that of aquatic systems. Therefore, to facilitate progress, the first Soil Viral Workshop was held to encourage international scientific discussion and collaboration, suggest guidelines for future research, and establish soil viral research as a concrete research area. The workshop took place at Søminestationen, Denmark, between 15 and 17th of June 2022. The meeting was primarily held in person, but the sessions were also streamed online. The workshop was attended by 23 researchers from ten different countries and from a wide range of subfields and career stages. Eleven talks were presented, followed by discussions revolving around three major topics: viral genomics, virus-host interactions, and viruses in the soil food web. The main take-home messages and suggestions from the discussions are summarized in this report.

09 BIOMASS FUELS↗